Refine
Keywords
- mirror (8) (remove)
Year of publication
- 2017 (8) (remove)
Document Type
- Conference Proceeding (6)
- Article (2)
Language
- English (8)
Future investigations of astronomical X-ray sources require light weight telescope systems with large collecting areas and good angular resolution. The Wolter I type telescope design offers a suitable possibility for obtaining performant X-ray mirrors with high collecting areas. The technology based on replicated slumped glass optics using thin glasses thereby provides the opportunity to fulfil the light weight and mass production requirements. In NASA's telescope NuSTAR this technology has been proven as advantageous compared to previous systems. Coating thin glasses with iridium, gold or platinum enhances the reflectivity of X-ray mirrors.
In the field of X-ray astronomy different types of telescope optics based on grazing incidence mirrors can be used. This contribution presents a special design of a Lobster Eye wide-field telescope with mirrors based on flat silicon wafers and the task of coating such mirror substrates with reflective iridium layers.
Future space-based X-ray observatories need to be very lightweight for launcher mass constraints. Therefore they will
use a reduced mirror thickness, which results in the additional requirement of low coating stress to avoid deformation of
the initial precisely shaped mirror substrates. Due to their excellent reflection properties iridium coatings are sometimes
applied for grazing incidence mirrors in astronomical X-ray telescopes. At Aschaffenburg University of Applied
Sciences the coating of thin iridium films by an RF-magnetron sputtering technique is under development. The work is
embedded in collaborations with the Max-Planck-Institute for Extraterrestrial Physics in Germany, the Czech Technical
University in Prague, the Osservatorio Astronomico di Brera in Italy, the German Leibniz Institute for Solid State and
Materials Research in Dresden, and the French Institute Fresnel. Sputtering with different parameters leads to iridium
films with different properties. The current work is focused on the microstructure of the iridium coatings to study the
influence of the substrate and of the argon gas pressure on the thin film growing process. Correlations between coating
density, surface micro-roughness, the crystalline structure of the iridium layers, and the expected reflectivity of the X-ray
mirror as well as coating stress effects are presented and discussed. The final goal of the project is to integrate the
produced prototype mirrors into an X-ray telescope module. On a longer timescale measurements of the mirror modules
optical performance are planned at the X-ray test facility PANTER.
Within the project JEUMICO, an acronym for Joint European
Mirror Competence, the Aschaffenburg University of Applied Sciences and the
Czech Technical University in Prague started a collaboration to develop mirrors
for X-ray telescopes. Corresponding mirror segments use substrates of
at
silicon wafers which are coated with thin iridium lms, as this material is
promising high re
ectivity in the X-ray range of interest. The sputtering parameters
are optimized in the context of the expected re
ectivity of the coated
X-ray mirrors. In near future measurements of the assembled mirror modules
optical performances are planned at an X-ray test facility.
We present optic designs based on biomimetic, namely technical applications of
animal eyes principles (here: Lobster Eyes) for the special application of wide
field X-ray imaging. Thereby we show and discuss some experimental results
and correlate them with simulations. Preliminary results of an ongoing study on
other strange animal mirror eyes with potential scientific and technical
applications are also discussed. Some of them are based on the principle of
multilayer multi-mirror active optics arrangements. The Lobster Eye X-ray optics
needs special reflective coatings for a better performance, which are currently
developed within the Bavarian-Czech cooperation project JEUMICO.
High angular resolution, large collecting area and reduced weight per unit area are required for astronomical X-ray telescopes of the next generation observatories. New technologies for processing X-ray mirrors are under development to fulfill these needs. One option is to realize a Wolter I type telescope constituted of several hundred nested thin and light-weight X-ray mirror segments. The individual mirror segments need to be coated with an about 100 nm thick film of a high-reflective material to enhance the reflectivity for X-rays. Thereby an accurate shape metrology of the segments is necessary to predict the angular resolution of the astronomical telescope as well as to control the development process of X-ray mirrors. We present the challenges in shape measurements of thin glasses used to control the coating process and first experimental results about the repeatability of the measurements.
In the field of astronomical X-ray telescopes, different types of optics based on grazing incidence mirrors can be used. This contribution describes the special design of a lobster-eye optics in Schmidt's arrangement, which uses dual reflection to increase the collecting area. The individual mirrors of this wide-field telescope are made of at silicon wafers coated with reflecting iridium layers. This iridium coatings have some advantages compared to more common gold layers as is shown in corresponding simulations. The iridium coating process for the X-ray mirrors was developed within a cooperation of the Aschaffenburg University of Applied Sciences and the Czech Technical University in Prague. Different mirror parameters essential for a proper function of the X-ray optics, like the surface microroughness and the problematic of a good adhesion quality of the coatings were studied. After integration of the individual mirrors into the final lobster-eye optics and the corresponding space qualification testing it is planned to fly the telescope in a recently proposed NASA rocket experiment.
X-ray astronomy uses space-based telescopes to overcome the disturbing absorption of the Earth´s atmosphere. The telescope mirrors are operating at grazing incidence angles and are coated with thin metal films of high-Z materials to get sufficient reflectivity for the high-energy radiation to be observed. In addition the optical payload needs to be light-weighted for launcher mass constrains. Within the project JEUMICO, an acronym for “Joint European Mirror Competence”, the Aschaffenburg University of Applied Sciences and the Czech Technical University in Prague started a collaboration to develop mirrors for X-ray telescopes. The X-ray telescopes currently developed within this Bavarian- Czech project are of Lobster eye type optical design. Corresponding mirror segments use substrates of flat silicon wafers which are coated with thin iridium films, as this material is promising high reflectivity in the X-ray range of interest. The deposition of the iridium films is based on a magnetron sputtering process. Sputtering with different parameters, especially by variation of the argon gas pressure, leads to iridium films with different properties. In addition to investigations of the uncoated mirror substrates the achieved surface roughness has been studied. Occasional delamination of the iridium films due to high stress levels is prevented by chromium sublayers. Thereby the sputtering parameters are optimized in the context of the expected reflectivity of the coated X-ray mirrors. In near future measurements of the assembled mirror modules optical performances are planned at an X-ray test facility.