Refine
Labor/Institute
Keywords
- Femtosekundenlaser (35)
- Bragg-Reflektor (29)
- Laserschneiden (22)
- Laserbearbeitung (16)
- Faserlaser (15)
- Ultrakurzzeitlaser (15)
- Lumineszenzdiode (14)
- Laser (9)
- Quarzglas (8)
- Dünne Schicht (7)
Year of publication
Document Type
- Article (108)
- Conference Proceeding (60)
- Other (3)
- Part of a Book (1)
In this contribution we report on the possibilities of dry and lubricated friction modification
introduced by different laser surface texturing methods. We compare the potential of Laser-Induced
Periodic Surface Structures and Laser Beam Interference Ablation on 100Cr6 steel in a linear
reciprocating ball-on-disc configuration using 100Cr6 steel and tungsten carbide balls with load
forces between 50mN and 1000 mN. For dry friction, we find a possibility to reduce the coefficient
of friction and we observe a pronounced direction dependency for surfaces fabricated by Laser
Beam Interference Ablation. Furthermore, Laser-Induced Periodic Surface Structures result in
a load-dependent friction reduction for lubricated linear reciprocating movements. This work helps
to identify the modification behaviour of laser generated micro structures with feature sizes of
approximately 1μm and reveals new possibilities for surface engineering
In this contribution, we report on surface functionalization by introducing laser induced periodic surface structures on 100Cr6 bearing steel to modify complex tribological properties. The advanced approach of this study is the measurement of the coefficient of friction by performing a ball-on-disk Stribeck test on laser structured surfaces with polytetrafluoroethylene balls in a lubricant environment. The Stribeck test reveals the modified friction behavior using translation speeds up to 106 mm/min and load forces between 100 mN and 5000 mN. Our results show increased stiction and coefficient of friction for laser structured surfaces in the regime of boundary lubrication which is attributed to the laser induced surface asperities. Decreased coefficient of friction is observed in the regime of mixed and hydrodynamic lubrication, i.e. for velocities higher than 1000 mm/min, for surfaces covered by laser induced periodic surface structures with low spatial frequency.
Lab-on-chip systems are based on components to transport, mix, separate and analyse small volumes of different fluids. The consecutive integration of more complex functions into a single and compact chip demands on multilayer systems. As the classical production using a stacking and joining of single processed layers is elaborate and limited in terms of multilayer structures, an uprising trend to fabricate those devices is the internal, three dimensional processing of transparent substrates by using ultrashort laser pulses. In this study, we report on the generation of internal hollow architectures created by focused 514nm femtosecond laser pulses inside optical polymer bulk materials of different polymers. The three-dimensional channel layout is implemented by moving the sample using three-dimensional motorized stages, allowing arbitrary complex shaped internal channel architectures. Size and cross sectional shape of a single internal generated microchannel are determined by the intensity distribution of the focal voxel. In particular, we show a comprehensive parameter study to improve this laser process with respect to a higher processing speed and stability.
The laser beam welding of transparent plastic components is still a challenge
according to the state of the art. A new approach for the joining of two transparent
polymeric components using ultrashort laser beam pulses is presented in
this report. In this respect, the high peak pulse intensity associated with these
lasers permits non-linear absorption processes and thus the production of a
locally well-defined heat source in the interior even of a transparent material or
at the boundary layer between two transparent substrates. Welding results for
transparent plastics of the cycloolefin copolymer and polycarbonate types are
shown in this study. In addition to the investigation into the influences of fundamental
process parameters on the weld geometry, the leak tightness is
demonstrated in this study using a microfluidic system.