TY - JOUR A1 - Kefer, Stefan A1 - Sauer, Theresia A1 - Hessler, Steffen A1 - Kaloudis, Michael A1 - Schmauss, Bernhard A1 - Hellmann, Ralf T1 - Robust Polymer Planar Bragg Grating Sensors Embedded in Commercial-Grade Composites JF - Polymers N2 - This contribution demonstrates the functionality of polymer planar Bragg grating (PPBG) sensors integrated into commercial-grade carbon fiber reinforced polymer (CFRP) components. Multiple CFRP specimens are generated by curing a stack of pre-impregnated fibers inside of a heated mechanical press, exposing the polymer sensor to a pressure of 7 bar and a temperature of 120 °C for 2 h. After integration, the sensor still exhibits a strong and evaluable signal. Subsequent flexural experiments reveal a linear response of the integrated sensor’s Bragg wavelength to the CFRP specimen’s maximum deflection. Additional findings demonstrate that the embedded PPBG can be used to detect plastic deformations of a CFRP workpiece, whereas a linear correlation of plastic deformation to the resulting Bragg signal offset is determined. A plausibility check of the obtained results is delivered by a comparison of three-point flexural experiments on bulk CFRP workpieces, without integrated sensors and additional specimens featuring external optical sensors affixed to their surface. It is found that PPBGs based on cyclic olefin copolymers are able to overcome the temperature-related limitations of traditional polymer-based optical sensors and can thus be directly integrated into commercial-grade composites during production. KW - Bragg grating sensors KW - carbon fiber reinforced polymers KW - cyclic olefin copolymers KW - Bragg-Reflektor KW - Optischer Sensor Y1 - 2020 UR - https://www.mdpi.com/2073-4360/12/3/715/htm U6 - https://doi.org/10.3390/polym12030715 VL - 12 IS - 3 SP - 715 EP - 715 ER - TY - CHAP A1 - Kefer, Stefan A1 - Rosenberger, Manuel A1 - Hessler, Steffen A1 - Girschikofsky, Maiko A1 - Belle, Stefan A1 - Roth, Gian-Luca A1 - Schmauss, Bernhard A1 - Hellmann, Ralf T1 - Fabrication and Applications of Polymer Planar Bragg Grating Sensors based on Cyclic Olefin Copolymers T2 - 2019 Photonics & Electromagnetics Research Symposium - Fall (PIERS - Fall) N2 - This contribution reviews recent advancements, current research and possible applications of polymer planar Bragg grating (PPBG) sensors with a focus on the utilization of cyclic olefin copolymer (COC) substrates. COC-PPBGs can be handled and fabricated efficiently by employing a single writing step procedure which features simultaneous generation of waveguide and Bragg grating structure within an injection molded substrate. The resulting photonic structures exhibit an attenuation as low as 1.2 dB cm-1 and a reflectivity up to 99 %. The potential of COC-PPBGs for high-temperature applications is proven by demonstrating temperature measurements up to 160 °C. Moreover, it is possible to employ single PPBGs for multidimensional stress and strain sensing or even three-dimensional shape reconstruction. Due to their excellent properties, it is feasible to integrate COC-PPBGs into commercial-grade carbon fiber reinforced polymer workpieces for structural health monitoring. Furthermore, utilization of appropriate coatings enables functionalization of PPBGs for refractive index sensing and thus biochemical applications. Beside the fabrication and characterization of COC-based PPBGs, this contribution exemplifies and reviews such applications. KW - Bragg gratings , Gratings , Optical waveguides , Temperature sensors , Substrates KW - Optischer Sensor KW - Bragg-Reflektor Y1 - 2020 UR - https://ieeexplore.ieee.org/document/9021801 SN - 978-1-7281-5304-9 U6 - https://doi.org/10.1109/PIERS-Fall48861.2019.9021801 SP - 647 EP - 655 PB - Institute of Electrical and Electronics Engineers ER - TY - JOUR A1 - Kefer, Stefan A1 - Pape, Dominik A1 - Roth, Gian-Luca A1 - Hessler, Steffen A1 - Schmauss, Bernhard A1 - Hellmann, Ralf T1 - Micromilling-assisted fabrication of monolithic polymer ridge-type waveguides with integrated photonic sensing structures JF - Optical Materials Express N2 - This study demonstrates and discusses a novel approach for the fabrication and rapid prototyping of monolithic photonic platforms comprising a ridge-type waveguide with integrated sensing structures. First, the bulk injection-molded cyclic olefin copolymer substrates are micromilled in order to define the physical extension of the ridge structure. Cross-sections down to 30 × 30 µm2, exhibiting a mean surface roughness of 300 nm, are achieved with this process. Subsequently, UV radiation is used to modify the ridge structure’s refractive index, which leads to the formation of an optical waveguide. By employing a phase mask, it is possible to equip the photonic platform with a Bragg grating suitable for temperature measurements with a sensitivity of −5.1 pm K-1. Furthermore, an integrated Fabry-Pérot cavity, generated during the micromilling step as well, enables refractive index measurements with sensitivities up to 1154 nm RIU-1. KW - Cyclic Olefin Copolymers KW - Micromilling KW - Bragg Grating KW - Fabry-Pérot Etalon KW - Bragg-Reflektor KW - Optischer Sensor Y1 - 2021 UR - https://www.osapublishing.org/ome/fulltext.cfm?uri=ome-11-8-2389&id=453071 U6 - https://doi.org/https://doi.org/10.1364/OME.425778 VL - 11 IS - 8 SP - 2389 EP - 2400 ER -