TY - JOUR A1 - Adelmann, Benedikt A1 - Hellmann, Ralf T1 - Process optimization of laser fusion cutting of multilayer stacks of electrical sheets JF - International Journal of Advanced Manufacturing Technology KW - Laserschneiden Y1 - 2013 VL - 68 SP - 2693 EP - 2701 ER - TY - CHAP A1 - Hasenstab, Stefan A1 - Adelmann, Benedikt A1 - Hellmann, Ralf T1 - Laser Cutting of Alumina and Aluminum Nitride with a 500 W Single Mode Fiber Laser T2 - XXVII. microCAD International Scientific Conference KW - Laserschneiden KW - Aluminiumoxide Y1 - 2013 ER - TY - JOUR A1 - Heilmann, Eva-Maria A1 - Hellmann, Ralf A1 - Seidl, Albrecht T1 - Water Jet Guided Laser Cutting of Silicon Thin Films Using 515nm Disc Laser JF - Journal of Laser Micro/Nanoengineering KW - Laserschneiden KW - Dünne Schicht Y1 - 2014 VL - 6 IS - 2 SP - 168 ER - TY - JOUR A1 - Adelmann, Benedikt A1 - Hellmann, Ralf T1 - Fast Laser Cutting Optimization Algorithm JF - Physics Procedia 12-1, Elsevier Properties S.A KW - Laserschneiden KW - Optimierung Y1 - 2011 VL - 12 IS - Part A SP - 591 EP - 598 ER - TY - CHAP A1 - Adelmann, Benedikt A1 - Hellmann, Ralf T1 - Different modulation schemes in fibre laser cutting T2 - Proceeding XXV microCAD, International scientific conference, 2011, Section K: Material science/Material processing technologies KW - Laserschneiden KW - Faserlaser Y1 - 2014 SP - 1 EP - 6 ER - TY - CHAP A1 - Adelmann, Benedikt A1 - Hellmann, Ralf T1 - DOE based optimization of fibre laser cutting of metals T2 - Proceeding XXV microCAD, International scientific conference, 2011, Section K: Material science/Material processing technologies KW - Laserschneiden KW - Faserlaser Y1 - 2014 SP - 7 EP - 12 ER - TY - JOUR A1 - Heilmann, Eva-Maria A1 - Kowalski, Thomas A1 - Hellmann, Ralf A1 - Teigelkötter, Johannes T1 - Water Jet Guided Laser Cutting of High Temperature Superconductors JF - Journal of Laser Micro/Nanoengineering KW - laser KW - Laserschneiden Y1 - 2013 U6 - https://doi.org/10.2961/jlmn.2013.01.0014 VL - 8 IS - 1 SP - 70 EP - 74 ER - TY - CHAP A1 - Hühnlein, Kristof A1 - Tschirpke, Katrin A1 - Hellmann, Ralf T1 - Optimisation of laser cutting using design of experiment - A comparative study of cutting thin ceramic layers using a fibre laser and a CO2 laser T2 - Physics procedia T2 - 6th international conference on laser assisted net shape engineering KW - Laserschneiden Y1 - 2014 SN - 1875-3892 VL - 5 IS - Part B SP - 243 EP - 252 ER - TY - JOUR A1 - Hock, Klaus A1 - Adelmann, Benedikt A1 - Hellmann, Ralf T1 - Comparative study of remote fiber laser and water-jet guided laser cutting of thin film metal sheets JF - Physics procedia KW - laser KW - Laserschneiden Y1 - 2012 VL - 39 SP - 225 EP - 231 ER - TY - JOUR A1 - Schleier, Max A1 - Adelmann, Benedikt A1 - Esen, Cemal A1 - Glatzel, Uwe A1 - Hellmann, Ralf T1 - Development and evaluation of an image processing algorithm for monitoring fiber laser fusion cutting by a high-speed camera JF - Journal of Laser Applications KW - Laser cutting KW - Image processing KW - Optical imaging KW - Image sensors KW - Laser applications KW - Faserlaser KW - Laserschneiden KW - Bildverarbeitung Y1 - 2021 UR - https://doi.org/10.2351/7.0000391 U6 - https://doi.org/10.2351/7.0000391 VL - 2021 IS - 33 SP - 032004 EP - 032004 ER - TY - JOUR A1 - Adelmann, Benedikt A1 - Hellmann, Ralf T1 - Simultaneous Burr and Cut Interruption Detection during Laser Cutting with Neural Networks JF - Sensors KW - laser cutting KW - quality monitoring KW - artificial neural network KW - burr formation KW - cut interruption KW - Laserschneiden KW - Neuronales Netz Y1 - 2021 UR - https://doi.org/10.3390/s21175831 U6 - https://doi.org/10.3390/s21175831 VL - 2021 IS - 21 SP - 5831 EP - 5831 ER - TY - JOUR A1 - Adelmann, Benedikt A1 - Schleier, Max A1 - Hellmann, Ralf T1 - Laser Cut Interruption Detection from Small Images by Using Convolutional Neural Network JF - Sensors KW - laser cutting KW - remote sensing KW - convolutional neural network KW - cut interruption KW - image processing KW - Laserschneiden KW - Neuronales Netz Y1 - 2021 UR - https://doi.org/10.3390/s21020655 U6 - https://doi.org/10.3390/s21020655 VL - 2021 IS - 21(2) SP - 655 EP - 655 ER - TY - JOUR A1 - Roth, Gian-Luca A1 - Adelmann, Benedikt A1 - Hellmann, Ralf T1 - Cutting and Drilling of SiC Semiconductor by Fiber Laser JF - Journal of Laser Micro/Nanoengineering N2 - We present an experimental study on fiber laser micromachining of 4H-SiC semiconductor. In particular, we optimize the process time for percussion drilling of 440 µm and 330 µm thick wafers with a minimum drilling time of, eg, 7.5 ms being achieved for 330 µm thick wafers. The drilled holes are characterized by a low taper, a high circularity and entry diameters of about 60 µm. For laser cutting, effective cutting speeds of 2 mm/s and 0.63 mm/s are obtained for 330 µm and 440 µm wafer thickness, respectively, with the cut kerf width being 65 µm. Both processes are associated with a good quality that is characterized by no chipping and cracks. The capability of the fiber laser based micromachining process is highlighted by cutting complex micrometer scale inner and outer contours into partially metallized SiC wafers with high quality. KW - Laserschneiden KW - Faserlaser Y1 - 2015 VL - 10 IS - 3 SP - 279 EP - 283 ER - TY - CHAP A1 - Adelmann, Benedikt A1 - Hellmann, Ralf T1 - Comparative study of experimentally determined and simulated mechanical strength of fiber laser cut alumina substrates T2 - Proceedings of the 7th International Congress on Laser Advanced Materials Processing KW - Laserschneiden KW - Faserlaser KW - Aluminiumoxide Y1 - 2015 VL - 2015 IS - 15 SP - 1 EP - 9 ER - TY - JOUR A1 - Adelmann, Benedikt A1 - Hellmann, Ralf T1 - Investigation on flexural strength changes of alumina caused by cutting using fiber laser JF - Journal of Laser Micro/Nanoengineering KW - Laserschneiden KW - Faserlaser Y1 - 2014 VL - 9 SP - 153 EP - 160 ER - TY - CHAP A1 - Adelmann, Benedikt A1 - Neumeier, Benedikt A1 - Schleier, Max A1 - Wilmann, Eugen A1 - Hellmann, Ralf T1 - Optical cutting tear detection system for industrial fiber laser based cutting machines T2 - Lasers in Manufacturing Conference 2015 KW - Laserschneiden KW - Faserlaser Y1 - 2015 ER - TY - JOUR A1 - Adelmann, Benedikt A1 - Schleier, Max A1 - Neumeier, Benedikt A1 - Wilmann, Eugen A1 - Hellmann, Ralf T1 - Optical cutting interruption sensor for fiber lasers JF - Applied Sciences KW - Laserschneiden KW - Faserlaser Y1 - 2015 VL - 2015 IS - 5/3 SP - 544 EP - 554 ER - TY - JOUR A1 - Adelmann, Benedikt A1 - Ngo, Chan A1 - Hellmann, Ralf T1 - High aspect ratio cutting of metals using water jet guided laser JF - The International Journal of Advanced Manufacturing Technology KW - Laserschneiden KW - Wasserstrahlschneiden Y1 - 2015 VL - 2015 IS - 80 SP - 2053 EP - 2060 ER - TY - JOUR A1 - Schleier, Max A1 - Adelmann, Benedikt A1 - Neumeier, Benedikt A1 - Hellmann, Ralf T1 - Burr formation detector for fiber laser cutting based on a photodiode sensor system JF - Optics & Laser Technology KW - Unique sensor; Detection of burr formation; Signal characteristics associated to melt bath dynamics; KW - Laserschneiden KW - Faserlaser Y1 - 2017 U6 - https://doi.org/10.1016/j.optlastec.2017.04.027 VL - 96 IS - - SP - 13 EP - 17 ER - TY - JOUR A1 - Schleier, Max A1 - Adelmann, Benedikt A1 - Esen, Cemal A1 - Hellmann, Ralf T1 - Cross-correlation-based algorithm for monitoring laser cutting with high-power fiber lasers JF - IEEE Sensors Journal KW - Detection algorithm, laser cutting, online monitoring KW - Laserschneiden KW - Hochleistungslaser KW - Faserlaser Y1 - 2017 U6 - https://doi.org/10.1109/JSEN.2017.2783761 VL - 18 IS - 4 SP - 1585 EP - 1590 ER -