TY - CHAP A1 - Kefer, Stefan A1 - Pape, Natalie A1 - Schmauss, Bernhard A1 - Hellmann, Ralf T1 - Fabrication of Lattice-Like Waveguides in Planar Cyclic Olefin Copolymers T2 - 28th International Conference on Optical Fiber Sensors N2 - This work demonstrates the femtosecond laser-based fabrication of lattice-like waveguides in planar cyclic olefin copolymers. An overview of the fabrication process is provided and waveguiding in the C-band is proven via optical near-field analysis. KW - Wellenleiter KW - Femtosekundenlaser Y1 - 2023 SN - 978-1-957171-30-2 U6 - https://doi.org/10.1364/OFS.2023.Th6.69 ER - TY - JOUR A1 - Kefer, Stefan A1 - Limbach, Tobias A1 - Pape, Natalie A1 - Klamt, Kathrin A1 - Schmauss, Bernhard A1 - Hellmann, Ralf T1 - Birefringence in Injection-Molded Cyclic Olefin Copolymer Substrates and Its Impact on Integrated Photonic Structures JF - Polymers N2 - This contribution quantifies the birefringence within injection-molded cyclic olefin copolymer plates and discusses its impact on the mechanical properties of the plates. It also focuses on the impact of birefringence on integrated waveguides and Bragg gratings and provides fabrication guidelines for such structures. The anisotropy in all three dimensions of the workpiece is examined by means of polarimetry and a prism coupler. It is found that the birefringence is inhomogenously distributed within the workpieces, whereas the maximum birefringence not only varies locally, but also depends on the observation direction. Overall, a maximum birefringence of 10 × 10−4 is found at the plate’s surface near the injection gate. The anisotropy then reduces exponentially towards the center of the workpiece and saturates at 1.8 × 10−4, in a depth of 0.4 mm. Thus, the birefringence strongly affects near-surface photonic structures. It is found that, depending on their orientation and the local birefringence of the substrate, waveguides and Bragg gratings fabricated with comparable parameters behave completely differently in terms of polarization-dependent optical attenuation, cross-sectional intensity distribution and Bragg reflection signal. For example, the support of the TM mode can vary between total loss and an optical attenuation of 0.9 dB × cm−1. In consequence, this study underlines the importance of quantifying the birefringent state of an injection-molded cyclic olefin copolymer workpiece if it is supposed to serve as a substrate for integrated photonic structures. The study furthermore demonstrates that birefringence effects can be omitted by burying the photonic structures deeper into the volume of the thermoplastic. KW - cyclic olefin copolymer KW - birefringence KW - integrated photonics KW - Bragg grating KW - injection molding KW - Bragg-Reflektor KW - Wellenleiter KW - Doppelbrechung Y1 - 2024 UR - https://www.mdpi.com/2073-4360/16/2/168 U6 - https://doi.org/10.3390/polym16020168 VL - 16 IS - 2 SP - 168 EP - 168 ER - TY - CHAP A1 - Kefer, Stefan A1 - Pape, Natalie A1 - Gries, Nikola A1 - Roth, Gian-Luca A1 - Schmauss, Bernhard A1 - Hellmann, Ralf T1 - Towards Pressure Sensors Based on Polymer Planar Bragg Gratings T2 - Organic Photonic Materials and Devices XXV N2 - While Bragg grating-based optical devices have shown promising performances for pressure sensing applications, their sensitivity, especially in the low-pressure regime, is unsatisfying and needs to be optimized by elaborate designs, such as cantilevers or other extrinsic mechanical transducers. This contribution demonstrates and discusses a novel concept for optical pressure sensors based on polymer planar Bragg gratings. Waveguide and Bragg grating are fabricated underneath the surface of a temperature-stable and humidity-insensitive cyclic olefin copolymer substrate by means of a femtosecond laser. Based on the employed direct-writing procedure, in combination with adaptive, in-situ beam shaping with a spatial light modulator, writing depth, i.e., location of the photonic structures within the substrate, as well as Bragg grating periodicity and positioning can be deliberately chosen. Afterwards, the polymer substrate is post-processed with a high-precision micro mill, so a diaphragm comprising the integrated photonic structures is generated. The resulting diaphragm exhibits a thickness of 300 µm and a diameter of 10 mm. Finally, the optical sensor is packaged and sealed to form an air-filled gas pocket underneath the diaphragm. Deformations of the diaphragm by external pressure changes translate to strain variations along the waveguide axis and thus perturb the Bragg grating period. This leads to changes in the grating’s wavelength of main reflection, which can be evaluated in order to quantify the relative external pressure. With this straightforward optical sensor concept, pressure sensitivities up to 39 pm kPa-1, within relative pressures ranges from 78 kPa to 372 kPa, are achieved. KW - Bragg grating KW - pressure sensor KW - integrated photonics KW - cyclic olefin copolymers KW - femtosecond laser KW - Bragg-Reflektor KW - Drucksensor Y1 - 2023 SN - 9781510659414 U6 - https://doi.org/10.1117/12.2648723 ER -