TY - JOUR A1 - Zettl, Julian A1 - Klar, Maximilian A1 - Rung, Stefan A1 - Esen, Cemal A1 - Hellmann, Ralf T1 - Laser turning with ultrashort laser pulses JF - Journal of Manufacturing Processes N2 - We report on a comprehensive micromachining study of rotationally symmetric parts using femtosecond laser. A laser turning process with tangential impingement of the laser radiation complemented by a trepanning optics is implemented as to accomplish a true laser lathe micromachining approach. With the objective of optimized ablation rate and reduced surface roughness, the influence of pulse energy, feed rate, trepanning diameter and angular beam incidence, respectively, is investigated for processing stellite rods. We find the smallest feasible feature sizes of 8.5 μm in diameter and smoothest surfaces with an arithmetic average of the roughness profile as low as 0.18 μm. The surface roughness, however, appears to be limited by the occurrence of laser induced periodic surface structures provoked by the femtosecond laser radiation. Furthermore, the variation of the fluence in accordance to the incidence on a curved surface is discussed and the heat input into the material is examined through a longitudinal cross section. KW - Ultrashort laser pulses KW - Turning KW - Ablation rate KW - Tangential processing KW - Trepanning optic KW - Ultrakurzer Lichtimpuls KW - Laserbearbeitung KW - Mikrobearbeitung KW - Femtosekundenlaser Y1 - 2021 U6 - https://doi.org/10.1016/j.jmapro.2021.06.025 VL - 2021 IS - 68 SP - 1562 EP - 1568 ER -