TY - CHAP A1 - Proserpio, Laura A1 - Döhring, Thorsten A1 - Breunig, Elias A1 - Friedrich, Peter A1 - Winter, Anita T1 - Industrialization scenario for X-ray telescopes production based on glass slumping T2 - Proceedings of SPIE 9144, Space Telescopes and Instrumentation 2014: Ultraviolet to Gamma Ray, 914448 KW - Glasses KW - X-ray telescopes KW - Telescopes KW - Galactic astronomy KW - Spatial resolution KW - Röntgenteleskop Y1 - 2014 U6 - https://doi.org/10.1117/12.2055129 IS - 9144 ER - TY - GEN A1 - Döhring, Thorsten A1 - Stollenwerk, Manfred A1 - Proserpio, Laura A1 - Winter, Anita T1 - Transfer of astronomical mirror technologies – Project INTRAAST N2 - Poster KW - Optisches Glas KW - Raumfahrt Y1 - 2015 ER - TY - CHAP A1 - Döhring, Thorsten A1 - Stollenwerk, Manfred A1 - Gong, Qingqing A1 - Proserpio, Laura A1 - Winter, Anita A1 - Friedrich, Peter T1 - The challenge of developing thin mirror shells for future X-ray telescopes T2 - Proceedings of SPIE N2 - Previously used mirror technologies are not able to fulfil the requirements of future X-ray telescopes due to challenging requests from the scientific community. Consequently new technical approaches for X-ray mirror production are under development. In Europe the technical baseline for the planned X-ray observatory ATHENA is the radical new approach of silicon pore optics. NASA´s recently launched NuSTAR mission uses segmented mirrors shells made from thin bended glasses, successfully demonstrating the feasibility of the glass forming technology for X-ray mirrors. For risk mitigation also in Europe the hot slumping of thin glasses is being developed as an alternative technology for lightweight X-ray telescopes. The high precision mirror manufacturing requires challenging technical developments; several design trades and trend-setting decisions need to be made and are discussed within this paper. Some new technical and economic aspects of the intended glass mirror serial production are also studied within the recently started interdisciplinary project INTRAAST, an acronym for “industry transfer of astronomical mirror technologies”. The goal of the project, embedded in a cooperation of the Max-Planck-Institute for extraterrestrial Physics and the University of Applied Sciences Aschaffenburg, is to master the challenge of producing thin mirror shells for future X-ray telescopes. As a first project task the development of low stress coatings for thin glass mirror substrates have been started, the corresponding technical approach and first results are presented. KW - x-ray KW - telescope KW - astronomy KW - glass KW - Astronomie KW - Fernrohr KW - Optisches Glas Y1 - 2015 VL - 2015 IS - 9628 SP - 962809-1 EP - 962809-8 ER - TY - CHAP A1 - Winter, Anita A1 - Breunig, Elias A1 - Friedrich, Peter A1 - Proserpio, Laura A1 - Döhring, Thorsten T1 - Indirect glass slumping for future X-ray missions: overview, status and progress T2 - Proceedings of SPIE N2 - Future X-ray telescopes aim for large effective area within the given mass limits of the launcher. A promising method is the hot shaping of thin glass sheets via a thermal slumping process. This paper presents the status and progress of the indirect glass slumping technology developed at the Max-Planck-Institut for extraterrestrial Physics (MPE). Recent developments in our research include the use of the mould material Cesic under vacuum, as well as the fabrication of a high-precision slumping mould, which meets the requirements of large, high angular resolution missions like ATHENA. We describe the way forward to optimise the slumping process on these materials, the force-free integration concept and its progress, as well as the first test on reflective coating application. KW - x-ray KW - telescope KW - astronomy KW - glass KW - Astronomie KW - Fernrohr KW - Optisches Glas Y1 - 2015 VL - 2015 IS - 9603 SP - 960308-1 EP - 960308-8 ER - TY - CHAP A1 - Döhring, Thorsten A1 - Probst, Anne-Catherine A1 - Stollenwerk, Manfred A1 - Wen, Mingwu A1 - Proserpio, Laura ED - den Herder, Jan-Willem A. ED - Takahashi, Tadayuki ED - Bautz, Marshall T1 - Development of low-stress Iridium coatings for astronomical x-ray mirrors T2 - Proceedings of SPIE 9905, Space Telescopes and Instrumentation 2016: Ultraviolet to Gamma Ray N2 - Previously used mirror technologies are not suitable for the challenging needs of future X-ray telescopes. This is why the required high precision mirror manufacturing triggers new technical developments around the world. Some aspects of X-ray mirrors production are studied within the interdisciplinary project INTRAAST, a German acronym for "industry transfer of astronomical mirror technologies". The project is embedded in a cooperation of Aschaffenburg University of Applied Sciences and the Max-Planck-Institute for extraterrestrial Physics. One important task is the development of low-stress Iridium coatings for X-ray mirrors based on slumped thin glass substrates. The surface figure of the glass substrates is measured before and after the coating process by optical methods. Correlating the surface shape deformation to the parameters of coating deposition, here especially to the Argon sputtering pressure, allows for an optimization of the process. The sputtering parameters also have an influence on the coating layer density and on the micro-roughness of the coatings, influencing their X-ray reflection properties. Unfortunately the optimum coating process parameters seem to be contrarious: low Argon pressure resulted in better micro-roughness and higher density, whereas higher pressure leads to lower coating stress. Therefore additional measures like intermediate coating layers and temperature treatment will be considered for further optimization. The technical approach for the low-stress Iridium coating development, the experimental equipment, and the obtained first experimental results are presented within this paper. KW - telescope KW - mirror KW - coating KW - iridium KW - astronomy KW - Röntgenspiegel KW - Iridium KW - Beschichtung Y1 - 2016 U6 - https://doi.org/10.1117/12.2232074 VL - 2016 IS - 9905 SP - 99056S-1 EP - 99056S-7 ER - TY - CHAP A1 - Döhring, Thorsten A1 - Stollenwerk, Manfred A1 - Proserpio, Laura A1 - Breunig, Elias A1 - Friedrich, Peter T1 - The challenging development of lightweight glass mirrors for future X-ray telescopes T2 - DGaO Proceedings N2 - Previously used mirror technologies are not able to fulfill the challenging requirements of future X-ray telescopes. A promising new technology under development is the hot slumping of thin glasses. Challenges, design trades and first results are presented, including the thermal shaping process, the development of low stress coatings and the mirror segments integration concept. KW - astronomy KW - telescope KW - mirror KW - X-ray KW - glass KW - Röntgenteleskop KW - Röntgenspiegel Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?nbn:de:0287-2016-B018-0 SN - 1614-8436 VL - 2016 PB - Deutsche Gesellschaft für angewandte Optik CY - Erlangen ER - TY - CHAP A1 - Probst, Anne-Catherine A1 - Döhring, Thorsten A1 - Salmaso, Bianca A1 - Proserpio, Laura T1 - Shape measurement of thin glass substrates for X-ray mirrors: cross calibration of different equipments T2 - Proceedings of European Optical Society Annual Meeting 2016 N2 - To predict the angular resolution of future X-ray telescopes combined from thermally formed thin glass mirror segments, submicron accuracy is required on the shape measurements of the individual mirror substrates. A dedicated cross-calibration campaign using instruments of different European research institutions is presented. KW - X-ray KW - mirror KW - calibration KW - glass KW - Röntgenspiegel KW - Kalibrieren Y1 - 2016 VL - 2016 PB - European Optical Society ER - TY - CHAP A1 - Probst, Anne-Catherine A1 - Döhring, Thorsten A1 - Stollenwerk, Manfred A1 - Mingwu, Wen A1 - Proserpio, Laura ED - Cugny, Bruno ED - Karafolas, Nikos ED - Sodnik, Zoran T1 - Iridium coatings for space based x-ray optics T2 - Proceedings of SPIE N2 - Future investigations of astronomical X-ray sources require light weight telescope systems with large collecting areas and good angular resolution. The Wolter I type telescope design offers a suitable possibility for obtaining performant X-ray mirrors with high collecting areas. The technology based on replicated slumped glass optics using thin glasses thereby provides the opportunity to fulfil the light weight and mass production requirements. In NASA's telescope NuSTAR this technology has been proven as advantageous compared to previous systems. Coating thin glasses with iridium, gold or platinum enhances the reflectivity of X-ray mirrors. KW - Iridium KW - coating KW - X-ray KW - astronomy KW - mirror KW - Iridium KW - Spiegelteleskop KW - Röntgenastronomie Y1 - 2017 U6 - https://doi.org/10.1117/12.2296167 VL - 2017 IS - 10562 SP - 105621E-01 EP - 105621E-09 ER - TY - CHAP A1 - Probst, Anne-Catherine A1 - Döhring, Thorsten A1 - Zeising, Sebastian A1 - Salmaso, Bianca A1 - Stollenwerk, Manfred A1 - Proserpio, Laura T1 - Challenges in metrology of mirror segments for X-ray telescopes T2 - Proceedings of the 8th High Level Expert Meeting Asphere Metrology N2 - High angular resolution, large collecting area and reduced weight per unit area are required for astronomical X-ray telescopes of the next generation observatories. New technologies for processing X-ray mirrors are under development to fulfill these needs. One option is to realize a Wolter I type telescope constituted of several hundred nested thin and light-weight X-ray mirror segments. The individual mirror segments need to be coated with an about 100 nm thick film of a high-reflective material to enhance the reflectivity for X-rays. Thereby an accurate shape metrology of the segments is necessary to predict the angular resolution of the astronomical telescope as well as to control the development process of X-ray mirrors. We present the challenges in shape measurements of thin glasses used to control the coating process and first experimental results about the repeatability of the measurements. KW - metrology KW - mirror KW - telescope KW - Spiegelteleskop Y1 - 2017 UR - http://www.upob.de/index.php?option=com_phocadownload&view=category&download=198:8th-high-level-expert-meeting-2017-detailed-programme&id=21:upob-high-level-expert-meetings&Itemid=70 VL - 2017 IS - 8 PB - UTOB e.V. CY - Braunschweig ER - TY - CHAP A1 - Stehlikova, Veronika A1 - Proserpio, Laura A1 - Friedrich, Peter A1 - Madarasz, Emanuel A1 - Breunig, Elias A1 - Burwitz, Vadim A1 - Döhring, Thorsten A1 - Probst, Anne-Catherine T1 - Indirect glass slumping of grazing incidence mirror segments for lightweight x-ray telescopes T2 - Proceedings of the International Society for Optics and Photonics (SPIE) N2 - The paper provides a description of recent progress in the development of lightweight, precision and highthroughput grazing-incidence mirrors for X-ray astronomy made of glass. In particular, the indirect slumping technology under investigation at the Max Planck Institute for Extraterrestrial Physics (MPE) is reviewed and recent activities are presented together with the research approach. The glass slumping technique foresees several steps: a thermal forming process using a suitable mould; a re ective layer application; the alignment and integration of mirror segments into a supporting structure; and the � nal veri� cation of prototype modules using X-rays. Each step is considered at MPE, with the involvement of partner institutes and universities. The last year of activities was mainly dedicated to the procurement of new moulds and to the application of Iridium coating. The main results will be presented. KW - X-ray KW - iridium KW - telescope KW - slumping KW - glass KW - Iridium KW - Röntgenteleskop Y1 - 2017 U6 - https://doi.org/10.1117/12.2272671 VL - 2017 IS - 10399 SP - 103991Z-1 EP - 103991Z-7 PB - SPIE ER - TY - JOUR A1 - Probst, Anne-Catherine A1 - Stollenwerk, Manfred A1 - Emmerich, Florian A1 - Büttner, Andre A1 - Zeising, Sebastian A1 - Stadtmüller, Johannes A1 - Riethmüller, Franziska A1 - Stehlikova, Veronika A1 - Mingwu, Wen A1 - Proserpio, Laura A1 - Damm, Christine A1 - Rellinghaus, Bernd A1 - Döhring, Thorsten T1 - Influence of sputtering pressure on the nanostructure and the X-ray reflectivity of iridium coatings JF - Surface and Coatings Technology N2 - Reflective mirror coatings made of iridium are used in X-ray telescopes of the Chandra X-ray Observatory (CXO) launched in 1999 by the National Aeronautics and Space Administration (NASA) to investigate astronomical sources at photon energies below 10. keV. These coatings were produced in a DC magnetron sputtering process and have so far proven their suitability for space-based applications. We are considering in the present paper the processing of thin iridium films for lightweight telescopes using the radio frequency magnetron sputtering technique with an oblique angle deposition. The coating development presented here is focused on the influence of total sputtering pressure on film properties as well as on its impact on the mirror's performance. Characterisation methods such as X-ray diffractometry, X-ray reflectometry, atomic force microscopy and transmission electron microscopy have been used. Correlations between morphology, density, surface micro-roughness, crystal structure of the iridium layer and the expected reflectivity of the X-ray mirror are described and discussed. KW - Iridium KW - sputtering KW - microstructure KW - coating KW - X-ray KW - Iridium KW - Röntgenteleskop Y1 - 2017 UR - https://doi.org/10.1016/j.surfcoat.2017.10.062 SN - 0257-8972 VL - 2017 IS - 343 SP - 101 EP - 107 ER -