TY - CHAP A1 - Kefer, Stefan A1 - Rosenberger, Manuel A1 - Hessler, Steffen A1 - Girschikofsky, Maiko A1 - Belle, Stefan A1 - Roth, Gian-Luca A1 - Schmauss, Bernhard A1 - Hellmann, Ralf T1 - Fabrication and Applications of Polymer Planar Bragg Grating Sensors based on Cyclic Olefin Copolymers T2 - 2019 Photonics & Electromagnetics Research Symposium - Fall (PIERS - Fall) N2 - This contribution reviews recent advancements, current research and possible applications of polymer planar Bragg grating (PPBG) sensors with a focus on the utilization of cyclic olefin copolymer (COC) substrates. COC-PPBGs can be handled and fabricated efficiently by employing a single writing step procedure which features simultaneous generation of waveguide and Bragg grating structure within an injection molded substrate. The resulting photonic structures exhibit an attenuation as low as 1.2 dB cm-1 and a reflectivity up to 99 %. The potential of COC-PPBGs for high-temperature applications is proven by demonstrating temperature measurements up to 160 °C. Moreover, it is possible to employ single PPBGs for multidimensional stress and strain sensing or even three-dimensional shape reconstruction. Due to their excellent properties, it is feasible to integrate COC-PPBGs into commercial-grade carbon fiber reinforced polymer workpieces for structural health monitoring. Furthermore, utilization of appropriate coatings enables functionalization of PPBGs for refractive index sensing and thus biochemical applications. Beside the fabrication and characterization of COC-based PPBGs, this contribution exemplifies and reviews such applications. KW - Bragg gratings , Gratings , Optical waveguides , Temperature sensors , Substrates KW - Optischer Sensor KW - Bragg-Reflektor Y1 - 2020 UR - https://ieeexplore.ieee.org/document/9021801 SN - 978-1-7281-5304-9 U6 - https://doi.org/10.1109/PIERS-Fall48861.2019.9021801 SP - 647 EP - 655 PB - Institute of Electrical and Electronics Engineers ER - TY - JOUR A1 - Kefer, Stefan A1 - Bischoff, Kay A1 - Roth, Gian-Luca A1 - Haubner, Julian A1 - Schmauss, Bernhard A1 - Hellmann, Ralf T1 - Tunable Bulk Polymer Planar Bragg Gratings Electrified via Femtosecond Laser Reductive Sintering of CuO Nanoparticles JF - Advanced Optical Materials N2 - This contribution demonstrates and discusses electrically tunable polymer planar Bragg gratings based on bulk cyclic olefin copolymers. A lithographic single-writing-step method and femtosecond laser reductive sintering of copper(II) oxide nanoparticles are subsequently employed in order to generate buried photonic structures and copper conducting paths on top of the polymer substrate. This way, the necessary number of process steps for fabricating a planar polymer-based electro-optical device is greatly reduced. The response of a fully electrified grating structure follows temperature changes, induced by the copper conducting path, with sensitivities up to −31 pm K−1. Dilatometric measurements show that the specimen's behavior is correlated to the situationally reduced thermal expansion of the bulk polymer substrate. In consequence, the tuning response of the photonic platform follows a second order polynomial, whereas a direct current of 30 mA, which correlates to a power consumption of 18.3 mW, leads to a local temperature increase and a residual Bragg wavelength shift of 19.6 K and −547 pm, respectively. Moreover, the outstanding flexibility of the proposed fabrication concept is underlined by demonstrating alternative conducting path geometries, whereas one of the additional designs is adapted to control the spectral width of the Bragg grating's reflection peak. KW - Bragg gratings KW - CuO nanoparticles KW - cyclic olefin copolymers KW - electro-optic tuning KW - integrated photonics KW - Femtosekundenlaser KW - Bragg-Reflektor Y1 - 2021 UR - https://onlinelibrary.wiley.com/doi/10.1002/adom.202002203 U6 - https://doi.org/https://doi.org/10.1002/adom.202002203 VL - 9 IS - 13 SP - 2002203 EP - 2002203 ER - TY - JOUR A1 - Kefer, Stefan A1 - Pape, Dominik A1 - Roth, Gian-Luca A1 - Hessler, Steffen A1 - Schmauss, Bernhard A1 - Hellmann, Ralf T1 - Micromilling-assisted fabrication of monolithic polymer ridge-type waveguides with integrated photonic sensing structures JF - Optical Materials Express N2 - This study demonstrates and discusses a novel approach for the fabrication and rapid prototyping of monolithic photonic platforms comprising a ridge-type waveguide with integrated sensing structures. First, the bulk injection-molded cyclic olefin copolymer substrates are micromilled in order to define the physical extension of the ridge structure. Cross-sections down to 30 × 30 µm2, exhibiting a mean surface roughness of 300 nm, are achieved with this process. Subsequently, UV radiation is used to modify the ridge structure’s refractive index, which leads to the formation of an optical waveguide. By employing a phase mask, it is possible to equip the photonic platform with a Bragg grating suitable for temperature measurements with a sensitivity of −5.1 pm K-1. Furthermore, an integrated Fabry-Pérot cavity, generated during the micromilling step as well, enables refractive index measurements with sensitivities up to 1154 nm RIU-1. KW - Cyclic Olefin Copolymers KW - Micromilling KW - Bragg Grating KW - Fabry-Pérot Etalon KW - Bragg-Reflektor KW - Optischer Sensor Y1 - 2021 UR - https://www.osapublishing.org/ome/fulltext.cfm?uri=ome-11-8-2389&id=453071 U6 - https://doi.org/https://doi.org/10.1364/OME.425778 VL - 11 IS - 8 SP - 2389 EP - 2400 ER - TY - GEN A1 - Kefer, Stefan A1 - Bischoff, Kay A1 - Roth, Gian-Luca A1 - Haubner, Julian A1 - Schmauss, Bernhard A1 - Hellmann, Ralf T1 - Tunable Bulk Polymer Planar Bragg Gratings Electrified via Femtosecond Laser Reductive Sintering of CuO Nanoparticles (Advanced Optical Materials 13/2021) N2 - This cover image outlines the fabrication method of a polymer planar Bragg grating electrified via femtosecond laser reductive sintering of CuO nanoparticles (see article number 2002203 by Stefan Kefer and co-workers). Based on this sophisticated methodology, bulk cyclic olefin copolymer substrates can be equipped with integrated photonic structures comprising a waveguide as well as a Bragg grating. Its reflective characteristics can be efficiently tuned by means of the subsequently generated Cu conducting path, whereas the applied femtosecond laser process enables an almost limitless degree of freedom towards conducting path geometries. N2 - Cover zum zugehörigen Artikel KW - Femtosekundenlaser KW - Bragg-Reflektor Y1 - 2021 UR - https://onlinelibrary.wiley.com/doi/10.1002/adom.202170048 U6 - https://doi.org/https://doi.org/10.1002/adom.202170048 ER - TY - CHAP A1 - Kefer, Stefan A1 - Pape, Natalie A1 - Gries, Nikola A1 - Roth, Gian-Luca A1 - Schmauss, Bernhard A1 - Hellmann, Ralf T1 - Towards Pressure Sensors Based on Polymer Planar Bragg Gratings T2 - Organic Photonic Materials and Devices XXV N2 - While Bragg grating-based optical devices have shown promising performances for pressure sensing applications, their sensitivity, especially in the low-pressure regime, is unsatisfying and needs to be optimized by elaborate designs, such as cantilevers or other extrinsic mechanical transducers. This contribution demonstrates and discusses a novel concept for optical pressure sensors based on polymer planar Bragg gratings. Waveguide and Bragg grating are fabricated underneath the surface of a temperature-stable and humidity-insensitive cyclic olefin copolymer substrate by means of a femtosecond laser. Based on the employed direct-writing procedure, in combination with adaptive, in-situ beam shaping with a spatial light modulator, writing depth, i.e., location of the photonic structures within the substrate, as well as Bragg grating periodicity and positioning can be deliberately chosen. Afterwards, the polymer substrate is post-processed with a high-precision micro mill, so a diaphragm comprising the integrated photonic structures is generated. The resulting diaphragm exhibits a thickness of 300 µm and a diameter of 10 mm. Finally, the optical sensor is packaged and sealed to form an air-filled gas pocket underneath the diaphragm. Deformations of the diaphragm by external pressure changes translate to strain variations along the waveguide axis and thus perturb the Bragg grating period. This leads to changes in the grating’s wavelength of main reflection, which can be evaluated in order to quantify the relative external pressure. With this straightforward optical sensor concept, pressure sensitivities up to 39 pm kPa-1, within relative pressures ranges from 78 kPa to 372 kPa, are achieved. KW - Bragg grating KW - pressure sensor KW - integrated photonics KW - cyclic olefin copolymers KW - femtosecond laser KW - Bragg-Reflektor KW - Drucksensor Y1 - 2023 SN - 9781510659414 U6 - https://doi.org/10.1117/12.2648723 ER - TY - JOUR A1 - Flachs, Dennis A1 - Emmerich, Florian A1 - Roth, Gian-Luca A1 - Hellmann, Ralf A1 - Thielemann, Christiane T1 - Laser-bonding of FEP/FEP interfaces for a flexiblemanufacturing process of ferroelectrets JF - Journal of Physics: Conference Series N2 - This paper presents an optimized laser-bonding process for piezoelectric energy-harvesters based on thin fluorinated-ethylene-propylene (FEP) foils, using an ultra-short-pulse(USP) laser. Due to the minimized thermal stress in the material during bonding, achieved bypulse durations of few picoseconds, we created seams down to 40μm width without generatingholes in the 12.5μm thick FEP-foils. Using a galvanometer scanning system allowed for fastbonding-speed up to several centimeters per second, making the process also suitable for largestructures and areas. The achieved bond strength of the seams under influence of shearingstress was examined using tensile testing, which showed a sufficient strength of about 25 % of the maximum strength of an unbonded, single layer of FEP. KW - Ultrakurzzeitlaser KW - Piezoelektrizität Y1 - 2019 U6 - https://doi.org/10.1088/1742-6596/1407/1/012107 VL - 1407 IS - 012107 SP - 1 EP - 5 ER - TY - CHAP A1 - Franz, Daniel A1 - Roth, Gian-Luca A1 - Rung, Stefan A1 - Esen, Cemal A1 - Hellmann, Ralf T1 - Superimposed beam deflection using acousto-optical deflectors in combination with a galvanometer scanner T2 - Lasers in Manufacturing - LiM 2021 KW - Galvanometer Y1 - 2021 ER -