TY - THES A1 - Girschikofsky, Maiko T1 - Herstellung und Anwendung planarer Bragg-Gitter-Sensoren KW - Bragg-Reflektor KW - Optischer Sensor KW - Integrierter Sensor Y1 - 2020 SN - 978-3-8440-7561-8 PB - Shaker ER - TY - JOUR A1 - Roth, Gian-Luca A1 - Haubner, Julian A1 - Kefer, Stefan A1 - Esen, Cemal A1 - Hellmann, Ralf T1 - Fs-laser based hybrid micromachining for polymer micro-opto electrical systems JF - Optics and Lasers in Engineering N2 - We report on femtosecond laser direct writing of electrically conductive copper structures on transparent cyclic olefin copolymer based planar optical chips. The process is based on a laser-induced reduction of CuO nanoparticles dissolved in a water-soluble resin. Thus generated conductive copper structures are characterized with respect to their chemical composition and electrical resistivity. In addition, the application of ultrashort laser pulses enables a hybrid micromachining approach comprising ablation of polymer substrates and the fabrication of copper patterns in a single laser processing setup. A possible electro-optical application of this approach is demonstrated by employing the copper structures as an electro-thermal microheater in combination with a polymer planar optical Bragg grating sensor. This, in turn, highlights the potential of generating copious micro-opto-electro-mechanical polymer structures for numerous sensing applications ranging from Lab-on-Chip to environmental applications using the presented hybrid micromachining approach. KW - Femtosekundenlaser KW - Bragg-Reflektor Y1 - 2020 U6 - https://doi.org/10.1016/j.optlaseng.2020.106362 VL - 137 IS - 10362 SP - 1 EP - 8 ER - TY - JOUR A1 - Roth, Gian-Luca A1 - Hessler, Steffen A1 - Kefer, Stefan A1 - Girschikofsky, Maiko A1 - Esen, Cemal A1 - Hellmann, Ralf T1 - Femtosecond laser inscription of waveguides and Bragg gratings in transparent cyclic olefin copolymers JF - Optics Express N2 - We report on a femtosecond laser based fabrication technique that enables simultaneous single-step generation of optical waveguides and Bragg gratings inside bulk cyclic olefin copolymers. Due to the nonlinear absorption of focused and spatially modulated laser radiation with a wavelength of 514 nm and a pulse duration of 450 fs, a modification concluding a refractive index shift increase inside the substrate can be achieved. A sophisticated characterization of the generated waveguides by means of an elaborate cut-back method reveals a maximum attenuation of 3.2 dB/cm. Additionally, a Mach-Zehnder interferometer is used to examine the waveguide’s refractive index profile. The integrated Bragg grating structures exhibit reflectivities up to 95 % and a spectral full width at half maximum of 288 pm, at a Bragg wavelength of 1582 nm, whereas the grating period can be deliberately chosen by adapting the fabrication parameters. Thus, due to its increased flexibility and the resulting dispensability of cost-intensive phase masks, this method constitutes an especially promising fabrication process for polymer Bragg gratings inside of bulk materials. KW - Femtosekundenlaser KW - Wellenleiter KW - Bragg-Reflektor Y1 - 2020 U6 - https://doi.org/10.1364/OE.388364 VL - 28 IS - 12 SP - 18077 EP - 18084 ER - TY - GEN A1 - Kefer, Stefan A1 - Dai, Jixiang A1 - Yang, Minghong A1 - Schmauss, Bernhard A1 - Hellmann, Ralf T1 - Hypersensitive H2 sensor based on polymer planar Bragg gratings coated with Pt-loaded WO3–SiO2: erratum N2 - We present an erratum to our Letter [Opt. Lett. 45, 3601 (2020)]. Labeling errors in two figures and an incorrect sentence are revised. The corrections have no influence on the conclusions of the original Letter. N2 - Erratum KW - Bragg Grating, Hydrogen Detection, Functionalization KW - Gassensor KW - Wasserstoff KW - Bragg-Reflektor Y1 - 2020 UR - https://www.osapublishing.org/ol/abstract.cfm?uri=ol-45-16-4498 U6 - https://doi.org/https://doi.org/10.1364/OL.401819 VL - 45 IS - 16 SP - 4498 EP - 4498 ER - TY - JOUR A1 - Kefer, Stefan A1 - Dai, Jixiang A1 - Yang, Minghong A1 - Schmauss, Bernhard A1 - Hellmann, Ralf T1 - Hypersensitive H2 sensor based on polymer planar Bragg gratings coated with Pt-loaded WO3-SiO2 JF - Optics Letters N2 - This letter demonstrates a novel hydrogen sensor based on a polymer planar Bragg grating coated with Pt-loaded WO3-SiO2. The reflected Bragg signal shows a distinct peak splitting correlated to substrate anisotropies originating from the injection molding process. Especially at low H2 concentrations, both sensing peaks exhibit an outstanding response to the heat generated by the exothermic reaction between hydrogen molecules and coating. Thereby, a hydrogen volume ratio of 50 ppm leads to a Bragg wavelength shift of -37 pm, which yields an outstandingly low detection limit of only 5 ppm H2 in air. Thus, functionalized polymer planar Bragg gratings are eminently suitable for H2 leak detection applications. KW - Bragg Grating Sensors KW - Hydrogen Detection KW - Cyclic Olefin Copolymers KW - Gassensor KW - Wasserstoff KW - Bragg-Reflektor Y1 - 2020 UR - https://www.osapublishing.org/ol/abstract.cfm?uri=ol-45-13-3601 U6 - https://doi.org/https://doi.org/10.1364/OL.395341 VL - 45 IS - 13 SP - 3601 EP - 3604 ER - TY - JOUR A1 - Kefer, Stefan A1 - Sauer, Theresia A1 - Hessler, Steffen A1 - Kaloudis, Michael A1 - Schmauss, Bernhard A1 - Hellmann, Ralf T1 - Robust Polymer Planar Bragg Grating Sensors Embedded in Commercial-Grade Composites JF - Polymers N2 - This contribution demonstrates the functionality of polymer planar Bragg grating (PPBG) sensors integrated into commercial-grade carbon fiber reinforced polymer (CFRP) components. Multiple CFRP specimens are generated by curing a stack of pre-impregnated fibers inside of a heated mechanical press, exposing the polymer sensor to a pressure of 7 bar and a temperature of 120 °C for 2 h. After integration, the sensor still exhibits a strong and evaluable signal. Subsequent flexural experiments reveal a linear response of the integrated sensor’s Bragg wavelength to the CFRP specimen’s maximum deflection. Additional findings demonstrate that the embedded PPBG can be used to detect plastic deformations of a CFRP workpiece, whereas a linear correlation of plastic deformation to the resulting Bragg signal offset is determined. A plausibility check of the obtained results is delivered by a comparison of three-point flexural experiments on bulk CFRP workpieces, without integrated sensors and additional specimens featuring external optical sensors affixed to their surface. It is found that PPBGs based on cyclic olefin copolymers are able to overcome the temperature-related limitations of traditional polymer-based optical sensors and can thus be directly integrated into commercial-grade composites during production. KW - Bragg grating sensors KW - carbon fiber reinforced polymers KW - cyclic olefin copolymers KW - Bragg-Reflektor KW - Optischer Sensor Y1 - 2020 UR - https://www.mdpi.com/2073-4360/12/3/715/htm U6 - https://doi.org/10.3390/polym12030715 VL - 12 IS - 3 SP - 715 EP - 715 ER - TY - CHAP A1 - Kefer, Stefan A1 - Rosenberger, Manuel A1 - Hessler, Steffen A1 - Girschikofsky, Maiko A1 - Belle, Stefan A1 - Roth, Gian-Luca A1 - Schmauss, Bernhard A1 - Hellmann, Ralf T1 - Fabrication and Applications of Polymer Planar Bragg Grating Sensors based on Cyclic Olefin Copolymers T2 - 2019 Photonics & Electromagnetics Research Symposium - Fall (PIERS - Fall) N2 - This contribution reviews recent advancements, current research and possible applications of polymer planar Bragg grating (PPBG) sensors with a focus on the utilization of cyclic olefin copolymer (COC) substrates. COC-PPBGs can be handled and fabricated efficiently by employing a single writing step procedure which features simultaneous generation of waveguide and Bragg grating structure within an injection molded substrate. The resulting photonic structures exhibit an attenuation as low as 1.2 dB cm-1 and a reflectivity up to 99 %. The potential of COC-PPBGs for high-temperature applications is proven by demonstrating temperature measurements up to 160 °C. Moreover, it is possible to employ single PPBGs for multidimensional stress and strain sensing or even three-dimensional shape reconstruction. Due to their excellent properties, it is feasible to integrate COC-PPBGs into commercial-grade carbon fiber reinforced polymer workpieces for structural health monitoring. Furthermore, utilization of appropriate coatings enables functionalization of PPBGs for refractive index sensing and thus biochemical applications. Beside the fabrication and characterization of COC-based PPBGs, this contribution exemplifies and reviews such applications. KW - Bragg gratings , Gratings , Optical waveguides , Temperature sensors , Substrates KW - Optischer Sensor KW - Bragg-Reflektor Y1 - 2020 UR - https://ieeexplore.ieee.org/document/9021801 SN - 978-1-7281-5304-9 U6 - https://doi.org/10.1109/PIERS-Fall48861.2019.9021801 SP - 647 EP - 655 PB - Institute of Electrical and Electronics Engineers ER -