TY - JOUR A1 - Kefer, Stefan A1 - Pape, Natalie A1 - Bischoff, Kay A1 - Schmauss, Bernhard A1 - Hellmann, Ralf T1 - Lattice-Like Waveguides With Integrated Bragg Gratings in Planar Cyclic Olefin Copolymers JF - Journal of Lightwave Technology N2 - This contribution demonstrates femtosecond laser direct writing of lattice-like waveguides in planar cyclic olefin copolymer substrates. Based on numerical simulation and experimental near-field analysis, stable single-mode waveguiding around wavelengths of 1550 nm is demonstrated. The waveguiding mechanism is based on a hexagonal array of laser-induced, positive refractive index modification lines. Thus, the lateral extension of the guided mode can be adapted by varying the fabrication parameters and, in consequence, the resulting cross-sectional arrangement of the refractive index perturbations. With an optical attenuationof 2.2 dB·cm-1 around 1550 nm, the fabricated waveguides are well-suited for on-chip integrated photonic devices. Moreover, the waveguides can also be equipped with Bragg gratings to enable the application of the photonic platform as a sensing device. Dependingon their length, the Bragg grating structures exhibit reflectivities ofup to 99% and spectral widths down to 0.3 nm. The flexibility of the fabrication process and the sensing capabilities of the lattice-like waveguides with integrated Bragg gratings are underlined by an exemplary application study demonstrating a relative pressure sensor. For that, a photonic platform is micromilled to generate a 300 µm thick diaphragm and a reference pressure chamber. The strain introduced to the diaphragm by external pressure changes can then be quantified by the integrated photonic structures.This way, absolute pressure sensitivities of up to 38 pm·kPa-1 can be achieved in a relative pressure range from −60 to 100 kPa. The newly-developed lattice-like waveguides with integrated Bragggratings are therefore well-suited for the realization of novel and adaptable photonic devices and sensors. KW - Bragg grating KW - cyclic olefin copolymers KW - femtosecond laser KW - integrated photonics KW - lattice-like waveguide KW - pressure sensor KW - Wellenleiter KW - Bragg-Reflektor Y1 - 2024 U6 - https://doi.org/10.1109/JLT.2023.3328323 SN - 0733-8724 VL - 42 IS - 18 SP - 6302 EP - 6311 PB - Institute of Electrical and Electronics Engineers (IEEE) ER - TY - CHAP A1 - Kefer, Stefan A1 - Pape, Natalie A1 - Gries, Nikola A1 - Roth, Gian-Luca A1 - Schmauss, Bernhard A1 - Hellmann, Ralf T1 - Towards Pressure Sensors Based on Polymer Planar Bragg Gratings T2 - Organic Photonic Materials and Devices XXV N2 - While Bragg grating-based optical devices have shown promising performances for pressure sensing applications, their sensitivity, especially in the low-pressure regime, is unsatisfying and needs to be optimized by elaborate designs, such as cantilevers or other extrinsic mechanical transducers. This contribution demonstrates and discusses a novel concept for optical pressure sensors based on polymer planar Bragg gratings. Waveguide and Bragg grating are fabricated underneath the surface of a temperature-stable and humidity-insensitive cyclic olefin copolymer substrate by means of a femtosecond laser. Based on the employed direct-writing procedure, in combination with adaptive, in-situ beam shaping with a spatial light modulator, writing depth, i.e., location of the photonic structures within the substrate, as well as Bragg grating periodicity and positioning can be deliberately chosen. Afterwards, the polymer substrate is post-processed with a high-precision micro mill, so a diaphragm comprising the integrated photonic structures is generated. The resulting diaphragm exhibits a thickness of 300 µm and a diameter of 10 mm. Finally, the optical sensor is packaged and sealed to form an air-filled gas pocket underneath the diaphragm. Deformations of the diaphragm by external pressure changes translate to strain variations along the waveguide axis and thus perturb the Bragg grating period. This leads to changes in the grating’s wavelength of main reflection, which can be evaluated in order to quantify the relative external pressure. With this straightforward optical sensor concept, pressure sensitivities up to 39 pm kPa-1, within relative pressures ranges from 78 kPa to 372 kPa, are achieved. KW - Bragg grating KW - pressure sensor KW - integrated photonics KW - cyclic olefin copolymers KW - femtosecond laser KW - Bragg-Reflektor KW - Drucksensor Y1 - 2023 SN - 9781510659414 U6 - https://doi.org/10.1117/12.2648723 ER - TY - CHAP A1 - Kefer, Stefan A1 - Zettl, Julian A1 - Schmauss, Bernhard A1 - Esen, Cemal A1 - Hellmann, Ralf ED - Kling, Rainer ED - Pfleging, Wilhelm ED - Watanabe, Akira T1 - High-Precision Micromachining of Sapphire Towards Optical Waveguiding Structures using Femtosecond Lasers T2 - Laser-based Micro- and Nanoprocessing XVII N2 - While sapphire is one of the most durable materials, its properties entail that high-precision machining, especially in the sub-millimeter regime, is still challenging. This contribution demonstrates and discusses novel femtosecond laser-based micromachining approaches for the fabrication of rotational-symmetric sapphire workpieces, specifically the generation of optical fibers by means of laser lathe of sapphire rods and the practical realization of windmill fibers. In addition, volume refractive index modification in planar sapphire substrates is presented to induce photonic crystal waveguides. The micromachined structures are comprehensively examined with respect to geometric fidelity, surface roughness, refractive index modification, and potential optical waveguiding properties. All micromachining approaches are done by means of frequency-doubled or frequency-tripled femtosecond laser radiation. Different laser optical setups including laser scanning head, spatial beam profilers including a spatial light modulator and axial rotatory movement of the specimen are employed for micro structuring and in-depth refractive index modifications. In particular for laser lathe, a sophisticated scanning pattern, in combination with an incremental axial rotatory movement of the specimen, allows for the precise diameter reduction of sapphire rods with 250 µm diameter to fibers with outer diameters of 25 µm. By supporting the workpiece with a V-groove fixture, multi-mode fibers with lengths up to 20 cm can be processed with an average surface roughness of 250 nm. Additionally, an adapted ablation scanning sequence enables the first practical demonstration of sapphire windmill fibers. Furthermore, using a spatial light modulator allows for the adaption of the laser propagation properties as to enable volume refractive index modifications with free-form arrangement. Hexagonal patterns of refractive index modifications surrounding a pristine waveguide core are fabricated and single-mode waveguiding at 1550 nm is verified. Finally, the possibility of integrating Bragg gratings into this photonic waveguide type is demonstrated KW - sapphire KW - femtosecond laser KW - micromachining KW - laser lathe KW - rod-to-fiber KW - Femtosekundenlaser KW - Saphir Y1 - 2023 SN - 9781510659230 U6 - https://doi.org/10.1117/12.2648758 SP - 3 EP - 11 ER - TY - JOUR A1 - Kefer, Stefan A1 - Zettl, Julian A1 - Esen, Cemal A1 - Hellmann, Ralf T1 - Femtosecond Laser-Based Micromachining of Rotational-Symmetric Sapphire Workpieces JF - Materials N2 - Sapphire is a robust and wear-resistant material. However, efficient and high-quality micromachining is still a challenge. This contribution demonstrates and discusses two novels, previously unreported approaches for femtosecond laser-based micromachining of rotational-symmetric sapphire workpieces, whereas both methods are in principal hybrids of laser scanning and laser turning or laser lathe. The first process, a combination of a sequential linear hatch pattern in parallel to the workpiece’s main axis with a defined incremental workpiece rotation, enables the fabrication of sapphire fibers with diameters of 50 µm over a length of 4.5 mm. Furthermore, sapphire specimens with a diameter of 25 µm over a length of 2 mm can be fabricated whereas an arithmetical mean height, i.e., Sa parameter, of 281 nm is achieved. The second process combines a constant workpiece feed and orthogonal scanning with incremental workpiece rotation. With this approach, workpiece length limitations of the first process are overcome and sapphire fibers with an average diameter of 90 µm over a length of 20 cm are manufactured. Again, the sapphire specimen exhibits a comparable surface roughness with an average Sa value of 249 nm over 20 cm. Based on the obtained results, the proposed manufacturing method paves an innovative and flexible, all laser-based way towards the fabrication or microstructuring of sapphire optical devices, and thus, a promising alternative to chemical processes. KW - sapphire KW - femtosecond laser KW - micromachining KW - laser turning KW - ablation threshold KW - Femtosekundenlaser KW - Saphir Y1 - 2022 UR - https://www.mdpi.com/1996-1944/15/18/6233 U6 - https://doi.org/10.3390/ ma15186233 VL - 15 IS - 18 SP - 6233 EP - 6233 ER - TY - JOUR A1 - Kefer, Stefan T1 - Sapphire Photonic Crystal Waveguides with Integrated Bragg Grating Structure JF - Photonics N2 - Abstract: This contribution demonstrates photonic crystal waveguides generated within bulk planar sapphire substrates. A femtosecond laser is used to modify the refractive index in a hexagonal pattern around the pristine waveguide core. Near-field measurements reveal single-mode behavior at a wavelength of 1550 nm and the possibility to adapt the mode-field diameter. Based on farfield examinations, the effective refractive index contrast between the pristine waveguide core and depressed cladding is estimated to 3x10-4. Additionally, Bragg gratings are generated within the waveguide core. Due to the inherent birefringence of Al2O3, the gratings exhibit two distinct wavelengths of main reflection. Each reflection peak exhibits a narrow spectral full width at a half maximum of 130 pm and can be selectively addressed by exciting the birefringent waveguide with appropriately polarized light. Furthermore, a waveguide attenuation of 1 dB cm-1 is determined. KW - integrated photonics KW - sapphire KW - Bragg grating KW - femtosecond laser KW - photonic crystal waveguide KW - Wellenleiter KW - Femtosekundenlaser KW - Bragg-Reflektor Y1 - 2022 UR - https://www.mdpi.com/2304-6732/9/4/234 U6 - https://doi.org/https://doi.org/10.3390/photonics9040234 VL - 9 IS - 4 SP - 234 EP - 234 ER -