TY - CHAP A1 - Kefer, Stefan A1 - Pape, Natalie A1 - Schmauss, Bernhard A1 - Hellmann, Ralf T1 - Fabrication of Lattice-Like Waveguides in Planar Cyclic Olefin Copolymers T2 - 28th International Conference on Optical Fiber Sensors N2 - This work demonstrates the femtosecond laser-based fabrication of lattice-like waveguides in planar cyclic olefin copolymers. An overview of the fabrication process is provided and waveguiding in the C-band is proven via optical near-field analysis. KW - Wellenleiter KW - Femtosekundenlaser Y1 - 2023 SN - 978-1-957171-30-2 U6 - https://doi.org/10.1364/OFS.2023.Th6.69 ER - TY - CHAP A1 - Kefer, Stefan A1 - Schmauss, Bernhard A1 - Hellmann, Ralf T1 - Sapphire-Based Planar Bragg Grating Devices T2 - 28th International Conference on Optical Fiber Sensors N2 - This study reports on the long-term stability and the high-temperature capability of sapphire-based photonic crystal waveguides with integrated Bragg gratings. Furthermore, their Bragg grating reflectivity as well as their temperature sensitivity is quantified. KW - Bragg-Reflektor KW - Wellenleiter Y1 - 2023 SN - 978-1-957171-30-2 U6 - https://doi.org/10.1364/OFS.2023.W2.4 ER - TY - CHAP A1 - Franz, Daniel A1 - Mücke, Dominik A1 - Kunz, Tim A1 - Rung, Stefan A1 - Esen, Cemal A1 - Hellmann, Ralf T1 - UV picosecond laser drilling of ABF film material for printed circuit boards using laser burst mode and beam shaping T2 - International Congress on Applications of Lasers & Electro-Optics (ICALEO) 2023 N2 - We report on an experimental study of laser microvia percussion drilling of Ajinomoto build-up film (ABF) material using an ultrashort pulsed laser in the ultraviolet region. In order to optimize the drilling quality in terms of the fabricated taper and microvia diameter, the MHz burst mode is used in combination with both a Gaussian and a top-hat laser intensity distribution. To evaluate the influence of the top-hat beam shape on defocusing, microvias were drilled at different z-positions in the range of 200 μm evenly distributed around the focal plane. The drilling quality was evaluated by laser scanning microscopy and metallography. When using a top-hat beam shape, a reduced taper of down to 26.8 % on average is achieved compared to a Gaussian beam. For the application of 3 intra-burst pulses, we find an improvement of the taper by 11.6% compared to the single pulse mode due to the increasing heat accumulation. Using a top-hat beam shape in combination with the MHz burst mode, an 18.2 % reduction in laser drilling time for a microvia with a similar taper is remarkable, demonstrating the high potential for scaling throughput in electronics manufacturing. KW - Pikosekundenbereich KW - Laserbohren Y1 - 2023 ER - TY - CHAP A1 - Bischoff, Kay A1 - Mücke, Dominik A1 - Esen, Cemal A1 - Hellmann, Ralf T1 - UV-Femtosecond-Laser Structuring of Silicon Carbide T2 - International Congress on Applications of Lasers & Electro-Optics (ICALEO) 2023 N2 - We report on ultraviolet ultrashort pulsed laser processing of silicon carbide. Laser ablated cavities are evaluated with respect to their ablation rates, surface roughness and overall quality by varying the laser pulse fluence. Using this type of laser, high edge quality and surface roughness down to 107 nm can be achieved with an ablation efficiency of up to 0.228 mm 3 W −1 min −1. Functional surfaces are produced by generating laser induced periodic surface structures. The comparison with infrared wavelength underlines the advantages of the ultraviolet wavelength for laser micro machining this material. Significant differences with respect to the measured ablation depths and roughness as well as generated micro-and nanostructures appear. While infrared ablation is dominated by a chipping mechanism above a critical fluence of 9.93 Jcm −2 , higher ablation rates are observed with strong quality losses at the same time. In comparison to the infrared emission wavelength, in general , a significantly higher processing quality is achieved with the ultraviolet emission wavelength. In addition, the influence of spot size and repetition rate in UV processing is investigated. By increasing these parameters, a process acceleration without quality losses is enabled. The generation of a sophisticated microstructure exemplifies the advantages of processing silicon carbide with the UV laser reported here. KW - Femtosekundenlaser KW - Siliciumcarbid Y1 - 2023 ER - TY - CHAP A1 - Bischoff, Kay A1 - Esen, Cemal A1 - Hellmann, Ralf T1 - Acceleration of Femtosecond Reductive Laser Sintering of Copper(II) Oxide for Conductive Copper Patterns on Cyclic Olefin Copolymers T2 - International Congress on Applications of Lasers & Electro-Optics (ICALEO) 2023 N2 - We report on the acceleration of femtosecond reductive laser sintering of copper (II) oxide on the surface of transparent cyclic olefin copolymers (COC) by varying the focus size to generate metallic copper (Cu) layers. By using different focusing conditions, different process speeds are achieved, and the structural accuracies are controlled. The formation of Cu lines is observed for different focus sizes at various scan speeds, which is attributed to laser exposure duration and chemical reaction time. The formed lines are categorized and measured by optical microscopy and provide the basis for two-dimensional Cu surfaces. By hatching, high quality conductive films are produced with an increased focus diameter of up to 400 µm at a scan speed of 400 mm/s and a hatch distance of 250 µm resulting in a multiple increased process speed by a factor of thirteen compared to previous research. Using 4-tip measurement , a low sheet resistance of 0.165 Ω/sq was validated on these Cu films, which have an atomic Cu content of 89.5%. KW - Femtosekundenlaser Y1 - 2023 ER - TY - CHAP A1 - Kefer, Stefan A1 - Zettl, Julian A1 - Schmauss, Bernhard A1 - Esen, Cemal A1 - Hellmann, Ralf ED - Kling, Rainer ED - Pfleging, Wilhelm ED - Watanabe, Akira T1 - High-Precision Micromachining of Sapphire Towards Optical Waveguiding Structures using Femtosecond Lasers T2 - Laser-based Micro- and Nanoprocessing XVII N2 - While sapphire is one of the most durable materials, its properties entail that high-precision machining, especially in the sub-millimeter regime, is still challenging. This contribution demonstrates and discusses novel femtosecond laser-based micromachining approaches for the fabrication of rotational-symmetric sapphire workpieces, specifically the generation of optical fibers by means of laser lathe of sapphire rods and the practical realization of windmill fibers. In addition, volume refractive index modification in planar sapphire substrates is presented to induce photonic crystal waveguides. The micromachined structures are comprehensively examined with respect to geometric fidelity, surface roughness, refractive index modification, and potential optical waveguiding properties. All micromachining approaches are done by means of frequency-doubled or frequency-tripled femtosecond laser radiation. Different laser optical setups including laser scanning head, spatial beam profilers including a spatial light modulator and axial rotatory movement of the specimen are employed for micro structuring and in-depth refractive index modifications. In particular for laser lathe, a sophisticated scanning pattern, in combination with an incremental axial rotatory movement of the specimen, allows for the precise diameter reduction of sapphire rods with 250 µm diameter to fibers with outer diameters of 25 µm. By supporting the workpiece with a V-groove fixture, multi-mode fibers with lengths up to 20 cm can be processed with an average surface roughness of 250 nm. Additionally, an adapted ablation scanning sequence enables the first practical demonstration of sapphire windmill fibers. Furthermore, using a spatial light modulator allows for the adaption of the laser propagation properties as to enable volume refractive index modifications with free-form arrangement. Hexagonal patterns of refractive index modifications surrounding a pristine waveguide core are fabricated and single-mode waveguiding at 1550 nm is verified. Finally, the possibility of integrating Bragg gratings into this photonic waveguide type is demonstrated KW - sapphire KW - femtosecond laser KW - micromachining KW - laser lathe KW - rod-to-fiber KW - Femtosekundenlaser KW - Saphir Y1 - 2023 SN - 9781510659230 U6 - https://doi.org/10.1117/12.2648758 SP - 3 EP - 11 ER - TY - CHAP A1 - Kefer, Stefan A1 - Pape, Natalie A1 - Gries, Nikola A1 - Roth, Gian-Luca A1 - Schmauss, Bernhard A1 - Hellmann, Ralf T1 - Towards Pressure Sensors Based on Polymer Planar Bragg Gratings T2 - Organic Photonic Materials and Devices XXV N2 - While Bragg grating-based optical devices have shown promising performances for pressure sensing applications, their sensitivity, especially in the low-pressure regime, is unsatisfying and needs to be optimized by elaborate designs, such as cantilevers or other extrinsic mechanical transducers. This contribution demonstrates and discusses a novel concept for optical pressure sensors based on polymer planar Bragg gratings. Waveguide and Bragg grating are fabricated underneath the surface of a temperature-stable and humidity-insensitive cyclic olefin copolymer substrate by means of a femtosecond laser. Based on the employed direct-writing procedure, in combination with adaptive, in-situ beam shaping with a spatial light modulator, writing depth, i.e., location of the photonic structures within the substrate, as well as Bragg grating periodicity and positioning can be deliberately chosen. Afterwards, the polymer substrate is post-processed with a high-precision micro mill, so a diaphragm comprising the integrated photonic structures is generated. The resulting diaphragm exhibits a thickness of 300 µm and a diameter of 10 mm. Finally, the optical sensor is packaged and sealed to form an air-filled gas pocket underneath the diaphragm. Deformations of the diaphragm by external pressure changes translate to strain variations along the waveguide axis and thus perturb the Bragg grating period. This leads to changes in the grating’s wavelength of main reflection, which can be evaluated in order to quantify the relative external pressure. With this straightforward optical sensor concept, pressure sensitivities up to 39 pm kPa-1, within relative pressures ranges from 78 kPa to 372 kPa, are achieved. KW - Bragg grating KW - pressure sensor KW - integrated photonics KW - cyclic olefin copolymers KW - femtosecond laser KW - Bragg-Reflektor KW - Drucksensor Y1 - 2023 SN - 9781510659414 U6 - https://doi.org/10.1117/12.2648723 ER - TY - CHAP A1 - Kefer, Stefan A1 - Schmauss, Bernhard A1 - Hellmann, Ralf T1 - POLYMER PLANAR BRAGG GRATINGS BASED ON BULK CYCLIC OLEFIN COPOLYMERS: FABRICATION AND FUNCTIONALIZATION T2 - Proceedings of Student Conference on Sensors, Systems and Measurement 2021 KW - Bragg-Reflektor Y1 - 2021 UR - https://scssm.fel.cvut.cz/wp-content/uploads/2021/07/Proceedings-SCSSM-2021.pdf SN - 978-80-01-06822-9 ER - TY - CHAP A1 - Roth, Gian-Luca A1 - Wolf, Bastian A1 - Esen, Cemal A1 - Hellmann, Ralf T1 - Generation of internal 3D microfluidic architectures in polymers by fs laser processing T2 - Lasers in Manufacturing 2019 N2 - Microfluidic lab on chip systems require components to transport, mix, separate and analyse small volumes of different fluids. In this study, we report on the laser generation of internal hollow architectures created by focused 514 nm femtosecond laser pulses inside PMMA bulk material. Size and cross-sectional shape of a single internal generated microchannel are determined by the intensity distribution inside the focal voxel and can be controlled either by the numerical aperture of the focusing objective or by laser beam shaping. As both approaches are practically limited with respect to the realizable cross-sectional shapes, we present a process based on an internal hatching to expand the achievable channel cross-sections and thereby enable the possibility to create complex 3D shaped internal structures. This process is applied to create fully internal functional microfluidic elements such as mixers which are part of most polymer lab-on-chip systems. KW - Femtosekundenlaser Y1 - 2019 ER - TY - CHAP A1 - Schwarz, Simon A1 - Rung, Stefan A1 - Esen, Cemal A1 - Hellmann, Ralf T1 - Axicon fabrication with ultrashort and CO2 laser T2 - LPM2018 The 19th International Symposium on Laser Precision Microfabrication KW - Ultrakurzzeitlaser KW - Kohlendioxidlaser Y1 - 2018 ER -