TY - CHAP A1 - Sommer, David A1 - Truetsch, Ben A1 - Esen, Cemal A1 - Hellmann, Ralf T1 - Microstructural Fracture Behaviour of PBF-LB/M Inconel 718 Components within different HIP Processes T2 - Lasers in Manufacturing, München, Juni 2025 N2 - We report on a study of different hot isostatic pressing (HIP) cycles, improving the mechanical properties of additively manufactured Inconel 718 components. For this, PBF-LB/M built components are post-processed by different HIP sequences, as gas pressure and processing time are varied, leading to differences in microstructure and material characteristics. Static and dynamic mechanical testing are performed, evaluating the changes in mechanical properties with particular focus on the ultimate tensile strength and endurance limit. Furthermore, metallographic analysis is employed to investigate the achieved density and microhardness. Microstructural analysis, showing the grain boundaries, is used to identify generated phases and precipitations of the material matrix. Moreover, the fracture behaviour is classified by grain deformation during mechanical testing. As the HIP leads to microstructural changes of Inconel 718 components, mechanical properties can be improved significantly, enhancing the ultimate tensile strength and simultaneously the endurance limit. KW - Isostatisches Heißpressen Y1 - 2025 ER - TY - CHAP A1 - Sommer, David A1 - Safi, Abdulrahman A1 - Esen, Cemal A1 - Hellmann, Ralf ED - Gu, Bo ED - Chen, Hongqiang T1 - Additive manufacturing of Nickel-based superalloy: optimization of surface roughness using integrated high-speed milling T2 - Laser 3D Manufacturing XI KW - Hochgeschwindigkeitsfräsen Y1 - 2024 U6 - https://doi.org/http://dx.doi.org/10.1117/12.3000972 PB - SPIE ER - TY - CHAP A1 - Sommer, David A1 - Peters, Maximilian A1 - Esen, Cemal A1 - Hellmann, Ralf T1 - Influence of in-situ high-speed milling within a hybrid additive manufacturing approach on the fatigue behaviour of Inconel 718 lattice structures T2 - Lasers in Manufacturing, München, Juni 2025 N2 - As lattice structures in various designs are used in additive manufacturing for lightweight components, the mechanical characterisation and fracture behaviour is of upmost importance for their industrial application. In this study, the fatigue behaviour of Inconel 718 lattice structures is evaluated, comparing sole PBF-LB/M to a hybrid additive manufacturing process combining PBF-LB/M with in-situ high-speed milling. At first, the static and dynamic mechanical load behaviour of different packing densities is analysed, determining the compressive strength and the endurance limit. Secondly, hybrid additive manufactured components are compared to PBF-LB/M built parts with respect to these mechanical properties, revealing improved compressive properties and modified regimes of fatigue. In addition, differences in fracture behaviour are qualified by fractographic and surface analysis. Overall, it can be summarized that the mechanical load characteristics, especially the fatigue behaviour, are improved for hybrid additively manufactured components with a superior surface quality of Ra < 1 µm. KW - Hochgeschwindigkeitsfräsen Y1 - 2025 ER - TY - CHAP A1 - Sommer, David A1 - Hornung, Simon A1 - Esen, Cemal A1 - Hellmann, Ralf ED - Gu, Bo ED - Chen, Hongqiang T1 - Optimization of mechanical properties of additive manufactured IN 718 parts combining LPBF and in-situ high-speed milling T2 - Laser 3D Manufacturing XI KW - Hybrid additive manufacturing KW - High-speed Milling KW - Hot isostatic pressing KW - Fatigue behaviour KW - Hochgeschwindigkeitsfräsen Y1 - 2024 U6 - https://doi.org/http://dx.doi.org/10.1117/12.3000952 PB - SPIE ER - TY - CHAP A1 - Schwarz, Simon A1 - Rung, Stefan A1 - Hellmann, Ralf T1 - High quality one-dimensional low spatial frequency LIPSS on sapphire generated by Top-Hat beam shaped ultrashort-pulsed laser T2 - MultiScience - XXXI. microCAD International Multidisciplinary Scientific Conference KW - Ultrakurzzeitlaser Y1 - 2017 ER - TY - CHAP A1 - Schwarz, Simon A1 - Rung, Stefan A1 - Hellmann, Ralf T1 - Simulation of process parameters towards the generation of low spatial frequency LIPSS on dielectric materials T2 - MultiScience - XXX. microCAD International Multidisciplinary Scientific Conference KW - Laserbestrahlung KW - Quarzglas Y1 - 2016 ER - TY - CHAP A1 - Schwarz, Simon A1 - Rung, Stefan A1 - Esen, Cemal A1 - Hellmann, Ralf T1 - Current results on laser-based production of complex optics in glass T2 - 10. Wetzlarer Herbsttagung "Moderne Optikfertigung", 29. - 30. September 2020, Wetzlar KW - Laserbearbeitung KW - Fertigungstechnik Y1 - 2020 ER - TY - CHAP A1 - Schwarz, Simon A1 - Rung, Stefan A1 - Esen, Cemal A1 - Hellmann, Ralf T1 - UKP-Prozess mit anschließendem CO2-Laserpolieren zur Fertigung komplexer Optiken T2 - 10. Workshop Laserbearbeitung von Glaswerkstoffen KW - Linse KW - Array KW - Laserbearbeitung KW - Ultrakurzzeitlaser KW - Kohlendioxidlaser Y1 - 2020 ER - TY - CHAP A1 - Schwarz, Simon A1 - Rung, Stefan A1 - Esen, Cemal A1 - Hellmann, Ralf T1 - Manufacturing of optical elements by non-contact laser processing T2 - Seventh European Seminar on Precision Optics Manufacturing, Proceedings KW - Laserbearbeitung KW - Optisches Bauelement Y1 - 2020 IS - 11478 ER - TY - CHAP A1 - Schwarz, Simon A1 - Rung, Stefan A1 - Esen, Cemal A1 - Hellmann, Ralf T1 - All laser-based fabrication of optical elements T2 - Proceedings of SPIE 11270, Frontiers in Ultrafast Optics: Biomedical, Scientific, and Industrial Applications XX KW - Ultrakurzzeitlaser KW - Kohlendioxidlaser KW - Femtosekundenlaser Y1 - 2020 ER -