@inproceedings{DoehringStollenwerkStadtmuelleretal.2021, author = {D{\"o}hring, Thorsten and Stollenwerk, Manfred and Stadtm{\"u}ller, Johannes and Zeising, Sebastian and Flachs, Dennis and Stehlikova, Veronika and Burwitz, Vadim and Krumrey, Michael K. and Cotroneo, Vincenzo and Klementova, Mariana}, title = {Characterisation of X-ray mirrors based on chromium-iridium tri-layer coatings}, series = {Proceedings of SPIE}, volume = {2021}, booktitle = {Proceedings of SPIE}, number = {11776}, publisher = {SPIE}, organization = {TH Aschaffenburg}, doi = {https://doi.org/10.1117/12.2592551}, pages = {1177607-1 -- 11776076}, year = {2021}, abstract = {Iridium-based layer systems are highly effective mirror coatings for space-born X-ray telescopes. During the recent years, Aschaffenburg University of Applied Sciences and its partners developed stress compensated chromium-iridium coatings for such astronomical applications, using chromium as an adhesive layer between iridium reflective layer and mirror substrate. However, there was room for improvement: To overcome the disturbing reflectivity reduction of the iridium absorption edge around 2 keV photon energy, thin overcoat layers of chromium are applied in addition now. This layer system has been analyzed by atomic force microscopy and transmission electron microscopy images. Furthermore, the reflectivity of such innovative X-ray mirrors based on chromium-iridium tri-layer coatings was recently measured at PTB's four-crystal monochromator beamline at the synchrotron radiation facility BESSY II. The experimental results, obtained for photon energies between 1.9 keV and 11 keV at two grazing incidence angles (0.6 degree and 0.9 degree) and their comparison with corresponding simulations are presented in this contribution. When compared to simulations of pure iridium coatings, a significantly higher reflectivity was achieved especially in the soft X-ray regime between 2 keV and 4 keV. Such chromium-iridium tri-layer coatings have high potential to increase the effective area for X-ray telescopes in Lobster Eye Design, for Wolter-I type X-ray optics, and for silicon pore optics as considered for the ATHENA telescope of the European Space Agency.}, subject = {R{\"o}ntgenspiegel}, language = {en} } @inproceedings{KhropostRiethmuellerDoehringetal.2025, author = {Khropost, Diana and Riethm{\"u}ller, Franziska and D{\"o}hring, Thorsten and Flachs, Dennis and H{\"u}lag{\"u}, Deniz and Hertwig, Andreas and Cotroneo, Vincenzo and Gibertini, Eugenio}, title = {Polydopamine: a bio-inspired polymer for X-ray mirror coatings and other technical applications}, series = {EUV and X-ray Optics: Synergy between Laboratory and Space IX}, volume = {2025}, booktitle = {EUV and X-ray Optics: Synergy between Laboratory and Space IX}, number = {13531}, editor = {Hudec, Ren{\´e} and Pina, Ladislav}, publisher = {SPIE}, doi = {10.1117/12.3056298}, pages = {135310H-1 -- 135310H-11}, year = {2025}, abstract = {Although the organic molecule dopamine (3,4-dihydroxyphenethylamine) is commonly known as one of the "hormones of happiness", thin polymer films of polydopamine (PDA) also have interesting technical properties. PDA is a very strong glue that sticks on almost everything, even under water. In nature, PDA is found in the byssal thread cuticles of mussels. When produced by dip-coating, the self-organizing PDA layers grow in a reproducible thickness of single or multiple molecule monolayers of a few nanometres thickness only. Here we present an optimized preparation regime as derived from polymerization analysis through absorption spectroscopy. One application is the use of thin PDA overcoatings to increase the soft X-ray reflectivity of astronomical X-ray mirrors. Furthermore, we give an outlook to other technical applications for this interesting material, presenting this bio-inspired organic polymer as an innovative technical solution for the future, with applications such as PDA-based super-capacitors and its promising role in enhancing separator materials for batteries.}, subject = {R{\"o}ntgenspiegel}, language = {en} } @misc{KhropostDoehringRiethmuelleretal.2024, author = {Khropost, Diana and D{\"o}hring, Thorsten and Riethm{\"u}ller, Franziska and H{\"u}lag{\"u}, Deniz}, title = {Poly-dopamine - an organic material for X-ray mirror coatings and other technical applications}, series = {AXRO 2024 - 15th International Conference on Astronomical X-Ray Optics}, volume = {2024}, journal = {AXRO 2024 - 15th International Conference on Astronomical X-Ray Optics}, organization = {TH Aschaffenburg}, pages = {1 -- 1}, year = {2024}, abstract = {Although the organic molecule dopamine (3,4-dihydroxyphenethylamine) is commonly known as the "hormone of happiness", thin polymer films of poly-dopamine also have interesting technical properties. When produced by dip coating, these self-organizing layers grow in a reproducible thickness of single or multiple molecule monolayers of a few nanometre thickness only. One application is the use of thin poly-dopamine overcoatings to increase the soft X-ray reflectivity of astronomical X-ray mirrors. We thereby introduce a method of determining the layer thickness of poly-dopamine, which is based on spectroscopic ellipsometry measurements and applies an optical model for the poly-dopamine layers including their dielectric function. Furthermore, we give an outlook to other technical applications for this promising material, presenting this bio-inspired organic polymer as an innovative technical solution for the future.}, subject = {R{\"o}ntgenspiegel}, language = {en} }