@inproceedings{StehlikovaDoehringSchaeferetal.2019, author = {Stehlikova, Veronika and D{\"o}hring, Thorsten and Sch{\"a}fer, Tobias and Stollenwerk, Manfred and Friedrich, Peter and Burwitz, Vadim and Hartner, Gisela and Bradshaw, Miranda and Liao, Yingyu and Pelliciari, Carlo}, title = {X-ray reflectivity measurements at chromium-iridium tri-layer coatings}, series = {Proceedings of SPIE}, volume = {2019}, booktitle = {Proceedings of SPIE}, number = {11119}, organization = {Max-Planck-Institut f{\"u}r Extraterrestrische Physik}, doi = {http://dx.doi.org/10.1117/12.2530439}, pages = {111191L-1 -- 111191L-6}, year = {2019}, abstract = {Studying astronomical objects in the X-ray regime, iridium-based layer systems are highly effective reflective materials for telescopes mirrors. Aschaffenburg University and the Czech Technical University in Prague jointly developed stress compensated chromium-iridium coatings. To overcome the disturbing reflectivity reduction of the iridium absorption edge around 2 keV photon energy and improve general reflectivity at lower incident energies, thin overcoat layers of chromium have been applied in addition. Corresponding measurements at several X-ray lines have been performed on these samples at the PANTER test facility of the Max-Planck Institute for extraterrestrial Physics. A part of the experimental results and their comparison with theoretical simulations are presented in this contribution.}, subject = {R{\"o}ntgenastronomie}, language = {en} } @inproceedings{PareschiCivitaniSironietal.2019, author = {Pareschi, Giovanni and Civitani, Marta Maria and Sironi, Giorgia and Yang, Yang and Cotroneo, Vincenzo and Valsecchi, Giuseppe and Magagnin, Luca and D{\"o}hring, Thorsten and Bradshaw, Miranda and Burwitz, Vadim and Pelliciari, Carlo}, title = {Reflectivity-enhancement at low x-ray energies in astronomical telescopes using low-density overcoatings: alternative materials and deposition methods}, series = {Proceedings of SPIE}, volume = {2019}, booktitle = {Proceedings of SPIE}, number = {11119}, publisher = {SPIE}, organization = {Osservatorio Astronomico di Brera}, doi = {https://doi.org/10.1117/12.2532392}, pages = {11119OS-1 -- 11119OS-13}, year = {2019}, abstract = {Low density overcoatings (mainly based on materials containing Carbon) onto usual high-density coatings (based i.e. on materials like e.g. like Ir, Au or Pt) have been proposed since many years ago in order to enhance the X- ray reflectivity at low energy (between 0.5 and 4 keV) of X-ray astronomical optics. The trick is to make use of the total reflection from the thin low-density material (which does not suffer much the photoelectric absorption) at low X-ray energies; the reflection of photons at higher energies (< 4 keV) occurs thanks to the much denser material under the overcoating. For several future projects, like e.g. ATHENA, LYNX and eXTP, it is foreseen the use of low-density overcoatings that will importantly increase the effective area at low X-ray energies. In this paper we will introduce the use of overcoatings based on materials different from the usual ones considered so far like C, B4C and SiC. In particular, we will discuss about a novel approach based on the use of thin layer of a Carbon-like materials deposited using a dip coating method. A possible combination with an intermediate thin layer of Chromium deposited e.g. via sputtering onto the usual high density material (Ir, Au or Pt) before the application of the Carbon-like material is also considered in the study, because it can further greatly enhance the soft X-ray effective area of future X-ray telescopes.}, subject = {R{\"o}ntgenteleskop}, language = {en} } @misc{GiovanniDoehringValsecchietal.2019, author = {Giovanni, Pareschi and D{\"o}hring, Thorsten and Valsecchi, Guiseppe and Magagnin, Luca and Bradshaw, Miranda and Burwitz, Vadim and Civitani, Marta Maria and Cotroneo, Vincenzo and Gibertini, Eugenio and Pelliciari, Carlo and Sironi, Giorgia and Yang, Yang}, title = {Enhancing the ATHENA effective area at low x-ray energies with unconventional overcoatings}, series = {Proceedings of the X-RAY ASTRONOMY 2019 conference}, volume = {2019}, journal = {Proceedings of the X-RAY ASTRONOMY 2019 conference}, organization = {Istituto Nazionale di Astrofisica}, pages = {1 -- 1}, year = {2019}, abstract = {Low density overcoatings (mainly based on materials containing Carbon) onto usual hi Z materials (like Ir, Au or Pt) have been proposed more than 10 years ago for enhancing the X-ray reflectivity at low energy (between 0.5 and 4 keV) in X-ray astronomical optics. The hack is to use the total reflection from the low density material (which do not suffer much the photoelectric absorption) at low energy, while the photons at high energy are reflected by the high density material. Now for several future projects like e.g. ATHENA and eXTP it is foreseen the use of low density overcoatings that will importantly increase the effective area at low energy. In this poster we will discuss about the use of materials different from the ones considered so far, in particular based on a thin layer of Chromium followed by another layer of a Carbon-like material, and of novel approaches for their application.}, subject = {R{\"o}ntgenteleskop}, language = {en} }