@inproceedings{DoehringProbstStollenwerketal.2016, author = {D{\"o}hring, Thorsten and Probst, Anne-Catherine and Stollenwerk, Manfred and Wen, Mingwu and Proserpio, Laura}, title = {Development of low-stress Iridium coatings for astronomical x-ray mirrors}, series = {Proceedings of SPIE 9905, Space Telescopes and Instrumentation 2016: Ultraviolet to Gamma Ray}, volume = {2016}, booktitle = {Proceedings of SPIE 9905, Space Telescopes and Instrumentation 2016: Ultraviolet to Gamma Ray}, number = {9905}, editor = {den Herder, Jan-Willem A. and Takahashi, Tadayuki and Bautz, Marshall}, doi = {10.1117/12.2232074}, pages = {99056S-1 -- 99056S-7}, year = {2016}, abstract = {Previously used mirror technologies are not suitable for the challenging needs of future X-ray telescopes. This is why the required high precision mirror manufacturing triggers new technical developments around the world. Some aspects of X-ray mirrors production are studied within the interdisciplinary project INTRAAST, a German acronym for "industry transfer of astronomical mirror technologies". The project is embedded in a cooperation of Aschaffenburg University of Applied Sciences and the Max-Planck-Institute for extraterrestrial Physics. One important task is the development of low-stress Iridium coatings for X-ray mirrors based on slumped thin glass substrates. The surface figure of the glass substrates is measured before and after the coating process by optical methods. Correlating the surface shape deformation to the parameters of coating deposition, here especially to the Argon sputtering pressure, allows for an optimization of the process. The sputtering parameters also have an influence on the coating layer density and on the micro-roughness of the coatings, influencing their X-ray reflection properties. Unfortunately the optimum coating process parameters seem to be contrarious: low Argon pressure resulted in better micro-roughness and higher density, whereas higher pressure leads to lower coating stress. Therefore additional measures like intermediate coating layers and temperature treatment will be considered for further optimization. The technical approach for the low-stress Iridium coating development, the experimental equipment, and the obtained first experimental results are presented within this paper.}, subject = {R{\"o}ntgenspiegel}, language = {en} } @inproceedings{ProbstDoehringStollenwerketal.2017, author = {Probst, Anne-Catherine and D{\"o}hring, Thorsten and Stollenwerk, Manfred and Mingwu, Wen and Proserpio, Laura}, title = {Iridium coatings for space based x-ray optics}, series = {Proceedings of SPIE}, volume = {2017}, booktitle = {Proceedings of SPIE}, number = {10562}, editor = {Cugny, Bruno and Karafolas, Nikos and Sodnik, Zoran}, doi = {10.1117/12.2296167}, pages = {105621E-01 -- 105621E-09}, year = {2017}, abstract = {Future investigations of astronomical X-ray sources require light weight telescope systems with large collecting areas and good angular resolution. The Wolter I type telescope design offers a suitable possibility for obtaining performant X-ray mirrors with high collecting areas. The technology based on replicated slumped glass optics using thin glasses thereby provides the opportunity to fulfil the light weight and mass production requirements. In NASA's telescope NuSTAR this technology has been proven as advantageous compared to previous systems. Coating thin glasses with iridium, gold or platinum enhances the reflectivity of X-ray mirrors.}, subject = {Iridium}, language = {en} } @article{BuettnerProbstEmmerichetal.2018, author = {B{\"u}ttner, Andre and Probst, Anne-Catherine and Emmerich, Florian and Damm, Christine and Rellinghaus, Bernd and D{\"o}hring, Thorsten and Stollenwerk, Manfred}, title = {Influence of Sputtering Pressure on the Microstructure and Layer Properties of Iridium Thin Films}, series = {Thin Solid Films}, volume = {2018}, journal = {Thin Solid Films}, number = {662}, issn = {0040-6090}, pages = {41 -- 46}, year = {2018}, abstract = {Iridium layers with low stress, high density, and low surface roughness find widespread use in different high-technology applications. This paper presents a study of the influence of the sputtering pressure on the properties of iridium thin films and of its effect on the substrate surface microstructure. We analysed the dependence of the microstructure, crystalline structure, electrical resistivity, and deposition rate on the sputtering pressure and surface defects of the substrate. For the latter, plasma etching of the substrate was performed for different processing times and its effect on the surface roughness of substrates and, subsequently, on the grown iridium films, was examined. The sputtering pressure and the substrate plasma etching time both had a strong influence on the microstructure and surface roughness. These microstructural changes are in good agreement with the tendency described in the Thornton Structure-Zone Model for different sputtering pressures and the microstructure phase map of Alvarez. The electrical resistivity, deposition rate, and crystalline structure were highly dependent on the sputtering pressure.}, subject = {Iridium}, language = {en} } @inproceedings{DoehringProbstStollenwerketal.2017, author = {D{\"o}hring, Thorsten and Probst, Anne-Catherine and Stollenwerk, Manfred and Emmerich, Florian and Stehl{\´i}kov{\´a}, Veronika and Inneman, Adolf}, title = {Prototyping iridium coated mirrors for X-ray astronomy}, series = {Proceedings of the International Society for Optics and Photonics}, volume = {2017}, booktitle = {Proceedings of the International Society for Optics and Photonics}, number = {10235}, editor = {Hudec, Ren{\´e} and Pina, Ladislav}, publisher = {SPIE International Society for Optics and Photonics}, address = {Bellingham WA}, organization = {Hochschule Aschaffenburg}, doi = {10.1117/12.2265931}, pages = {1023504-1 -- 1023504-8}, year = {2017}, abstract = {X-ray astronomy uses space-based telescopes to overcome the disturbing absorption of the Earth´s atmosphere. The telescope mirrors are operating at grazing incidence angles and are coated with thin metal films of high-Z materials to get sufficient reflectivity for the high-energy radiation to be observed. In addition the optical payload needs to be light-weighted for launcher mass constrains. Within the project JEUMICO, an acronym for "Joint European Mirror Competence", the Aschaffenburg University of Applied Sciences and the Czech Technical University in Prague started a collaboration to develop mirrors for X-ray telescopes. The X-ray telescopes currently developed within this Bavarian- Czech project are of Lobster eye type optical design. Corresponding mirror segments use substrates of flat silicon wafers which are coated with thin iridium films, as this material is promising high reflectivity in the X-ray range of interest. The deposition of the iridium films is based on a magnetron sputtering process. Sputtering with different parameters, especially by variation of the argon gas pressure, leads to iridium films with different properties. In addition to investigations of the uncoated mirror substrates the achieved surface roughness has been studied. Occasional delamination of the iridium films due to high stress levels is prevented by chromium sublayers. Thereby the sputtering parameters are optimized in the context of the expected reflectivity of the coated X-ray mirrors. In near future measurements of the assembled mirror modules optical performances are planned at an X-ray test facility.}, subject = {Iridium}, language = {en} } @inproceedings{DoehringProbstEmmerichetal.2017, author = {D{\"o}hring, Thorsten and Probst, Anne-Catherine and Emmerich, Florian and Stollenwerk, Manfred and Stehlikova, Veronika and Friedrich, Peter and Damm, Christine}, title = {Development of iridium coated X-ray mirrors for astronomical applications}, series = {Proceedings of the International Society for Optics and Photonics (SPIE)}, volume = {2017}, booktitle = {Proceedings of the International Society for Optics and Photonics (SPIE)}, number = {10399}, publisher = {SPIE}, doi = {10.1117/12.2273988}, pages = {103991C-1 -- 103991C-8}, year = {2017}, abstract = {Future space-based X-ray observatories need to be very lightweight for launcher mass constraints. Therefore they will use a reduced mirror thickness, which results in the additional requirement of low coating stress to avoid deformation of the initial precisely shaped mirror substrates. Due to their excellent reflection properties iridium coatings are sometimes applied for grazing incidence mirrors in astronomical X-ray telescopes. At Aschaffenburg University of Applied Sciences the coating of thin iridium films by an RF-magnetron sputtering technique is under development. The work is embedded in collaborations with the Max-Planck-Institute for Extraterrestrial Physics in Germany, the Czech Technical University in Prague, the Osservatorio Astronomico di Brera in Italy, the German Leibniz Institute for Solid State and Materials Research in Dresden, and the French Institute Fresnel. Sputtering with different parameters leads to iridium films with different properties. The current work is focused on the microstructure of the iridium coatings to study the influence of the substrate and of the argon gas pressure on the thin film growing process. Correlations between coating density, surface micro-roughness, the crystalline structure of the iridium layers, and the expected reflectivity of the X-ray mirror as well as coating stress effects are presented and discussed. The final goal of the project is to integrate the produced prototype mirrors into an X-ray telescope module. On a longer timescale measurements of the mirror modules optical performance are planned at the X-ray test facility PANTER.}, subject = {Iridium}, language = {en} } @article{ProbstStollenwerkEmmerichetal.2017, author = {Probst, Anne-Catherine and Stollenwerk, Manfred and Emmerich, Florian and B{\"u}ttner, Andre and Zeising, Sebastian and Stadtm{\"u}ller, Johannes and Riethm{\"u}ller, Franziska and Stehlikova, Veronika and Mingwu, Wen and Proserpio, Laura and Damm, Christine and Rellinghaus, Bernd and D{\"o}hring, Thorsten}, title = {Influence of sputtering pressure on the nanostructure and the X-ray reflectivity of iridium coatings}, series = {Surface and Coatings Technology}, volume = {2017}, journal = {Surface and Coatings Technology}, number = {343}, issn = {0257-8972}, pages = {101 -- 107}, year = {2017}, abstract = {Reflective mirror coatings made of iridium are used in X-ray telescopes of the Chandra X-ray Observatory (CXO) launched in 1999 by the National Aeronautics and Space Administration (NASA) to investigate astronomical sources at photon energies below 10. keV. These coatings were produced in a DC magnetron sputtering process and have so far proven their suitability for space-based applications. We are considering in the present paper the processing of thin iridium films for lightweight telescopes using the radio frequency magnetron sputtering technique with an oblique angle deposition. The coating development presented here is focused on the influence of total sputtering pressure on film properties as well as on its impact on the mirror's performance. Characterisation methods such as X-ray diffractometry, X-ray reflectometry, atomic force microscopy and transmission electron microscopy have been used. Correlations between morphology, density, surface micro-roughness, crystal structure of the iridium layer and the expected reflectivity of the X-ray mirror are described and discussed.}, subject = {Iridium}, language = {en} } @article{ProbstBegouDoehringetal.2018, author = {Probst, Anne-Catherine and Begou, Thomas and D{\"o}hring, Thorsten and Zeising, Sebastian and Stollenwerk, Manfred and Stadtm{\"u}ller, Johannes and Emmerich, Florian and Lumeau, Julien}, title = {Coating stress analysis and compensation for iridium-based x-ray mirrors}, series = {Applied Optics}, volume = {2018}, journal = {Applied Optics}, number = {57 (29)}, editor = {Publishing OSA,}, pages = {8775 -- 8779}, year = {2018}, abstract = {Iridium-based coatings for mirrors of x-ray telescopes are studied. In particular, stress-induced deformation is characterized and shown to be compressive and equal to -1786  MPa. Two methods for stress compensation are then studied. One relies on the deposition of silica on the back surface of the substrate and a second one relies on the deposition of a chromium sublayer. Advantages and drawbacks of each of these techniques are presented.}, subject = {R{\"o}ntgenteleskop}, language = {en} } @inproceedings{DoehringStollenwerkSchmittetal.2022, author = {D{\"o}hring, Thorsten and Stollenwerk, Manfred and Schmitt, Paul and Szeghalmi, Andrea}, title = {Umweltbest{\"a}ndige Spiegelbeschichtungen aus Iridium f{\"u}r den infraroten Spektralbereich}, series = {DGaO Proceedings}, volume = {2022}, booktitle = {DGaO Proceedings}, number = {123}, publisher = {DGaO}, organization = {TH Aschaffenburg}, issn = {1614-8436}, pages = {1 -- 2}, year = {2022}, abstract = {Das Edelmetall Iridium ist hart; extrem dicht; thermisch, mechanisch und chemisch stabil; weist eine hohe Reflektivit{\"a}t im mittleren und fernen Infrarot auf und hat eine hohe Best{\"a}ndigkeit gegen{\"u}ber Umwelteinfl{\"u}ssen - auch ohne weitere Schutzschichten. Es wurden die komplexen Brechungsindizes f{\"u}r Iridium-Spiegelbeschichtungen bestimmt, welche vorhandene Literaturwerte erg{\"a}nzen.}, subject = {Iridium}, language = {de} } @article{SchmittFeldeDoehringetal.2022, author = {Schmitt, Paul and Felde, Nadja and D{\"o}hring, Thorsten and Stollenwerk, Manfred and Uschmann, Ingo and Hanemann, Kevin and Siegler, Marie and Klemm, Georg and Gratzke, Nancy and T{\"u}nnermann, Andreas and Schwinde, Stefan and Schr{\"o}der, Sven and Szeghalmi, Adriana}, title = {Optical, structural, and functional properties of highly reflective and stable iridium mirror coatings for infrared applications}, series = {Optical Materials Express}, volume = {2022}, journal = {Optical Materials Express}, number = {12 / 2}, doi = {10.1364/OME.447306}, pages = {545 -- 559}, year = {2022}, abstract = {Metallic coatings are essential for numerous optical systems due to their high and broadband refl ectivity in the infrared spectral range. In contrast to well-established (protected)silver and gold mirror coatings, iridium is environmentally durable, referring to ISO 9211-3 and thermally stable up to 600 °C even without protective layers, as demonstrated. Additionally,the optical and related structural properties of atomic layer deposited (ALD) and magnetron sputtered (MS) Ir coatings were investigated using spectrophotometry, FTIR, ellipsometry, WLI,AFM, XRR, XRD, SEM, and electrical resistivity measurements. The properties of Ir ALD and Ir MS coatings diff er due to their topography and microstructure.}, subject = {Iridium}, language = {en} } @article{SchmittFeldeDoehringetal.2022, author = {Schmitt, Paul and Felde, Nadja and D{\"o}hring, Thorsten and Stollenwerk, Manfred and Uschmann, Ingo and Hanemann, Kevin and Siegler, Marie and Klemm, Georg and Gratzke, Nancy and T{\"u}nnermann, Andreas and Schwinde, Stefan and Schr{\"o}der, Sven and Szeghalmi, Adriana}, title = {Optical, structural, and functional properties of highly reflective and stable iridium mirrorcoatings for infrared applications: supplement}, series = {Optical Materials Express}, volume = {2022}, journal = {Optical Materials Express}, number = {12/2}, doi = {10.6084/m9.figshare.17121509}, pages = {545 -- 559}, year = {2022}, abstract = {Metallic coatings are essential for numerous optical systems due to their high and broadband refl ectivity in the infrared spectral range. In contrast to well-established (protected)silver and gold mirror coatings, iridium is environmentally durable, referring to ISO 9211-3 and thermally stable up to 600 °C even without protective layers, as demonstrated. Additionally,the optical and related structural properties of atomic layer deposited (ALD) and magnetron sputtered (MS) Ir coatings were investigated using spectrophotometry, FTIR, ellipsometry, WLI, AFM, XRR, XRD, SEM, and electrical resistivity measurements. The properties of Ir ALD and Ir MS coatings diff er due to their topography and microstructure.}, subject = {Iridium}, language = {en} }