@article{FranzYangMicheletal.2023, author = {Franz, Daniel and Yang, Yongting and Michel, Luis and Esen, Cemal and Hellmann, Ralf}, title = {Evaluation of an ultrashort pulsed laser robot system for flexible and large-area micromachining}, series = {Journal of Laser Applications}, volume = {35}, journal = {Journal of Laser Applications}, number = {4}, pages = {042057 -- 042065}, year = {2023}, abstract = {We report for the first time on the realization, characterization and application of an ultrashort pulsed laser robot system for flexible and large-area 2D and 3D laser micromachining with 6 articulated axes. To characterize the dynamic positioning of the laser beam during and after axes movement, CMOS image sensors were integrated into the beam path. A method introduced for the alignment of the optical axes allows a reduction of the deviations in laser beam positioning to less than 141.8 ± 92.9 μm within a 110° rotation range of axis 4. In addition, a high laser beam positioning repeatability of less than 102.2 μm is demonstrated over a total period of 14 h for a movement of axis 5 within a range of 0° to 90°. Initial laser cutting, laser structuring and laser marking applications on automotive dashboards and glass substrates are presented for flexible and large area 2D and 3D manufacturing. By applying a special laser cutting strategy for processing AF 32 eco thin glass, high cutting quality is achieved with a taper of up to 96.3\% without the generation of cracks, demonstrating the innovative potential of the high-precision laser robot system. Nonetheless, different identified inherent influences of each axis 1-5 during robot axis movement demand for an innovative beam stabilization concept to achieve high precision in laser beam positioning.}, subject = {Ultrakurzzeitlaser}, language = {en} } @inproceedings{FranzMueckeKunzetal.2023, author = {Franz, Daniel and M{\"u}cke, Dominik and Kunz, Tim and Rung, Stefan and Esen, Cemal and Hellmann, Ralf}, title = {UV picosecond laser drilling of ABF film material for printed circuit boards using laser burst mode and beam shaping}, series = {International Congress on Applications of Lasers \& Electro-Optics (ICALEO) 2023}, booktitle = {International Congress on Applications of Lasers \& Electro-Optics (ICALEO) 2023}, year = {2023}, abstract = {We report on an experimental study of laser microvia percussion drilling of Ajinomoto build-up film (ABF) material using an ultrashort pulsed laser in the ultraviolet region. In order to optimize the drilling quality in terms of the fabricated taper and microvia diameter, the MHz burst mode is used in combination with both a Gaussian and a top-hat laser intensity distribution. To evaluate the influence of the top-hat beam shape on defocusing, microvias were drilled at different z-positions in the range of 200 μm evenly distributed around the focal plane. The drilling quality was evaluated by laser scanning microscopy and metallography. When using a top-hat beam shape, a reduced taper of down to 26.8 \% on average is achieved compared to a Gaussian beam. For the application of 3 intra-burst pulses, we find an improvement of the taper by 11.6\% compared to the single pulse mode due to the increasing heat accumulation. Using a top-hat beam shape in combination with the MHz burst mode, an 18.2 \% reduction in laser drilling time for a microvia with a similar taper is remarkable, demonstrating the high potential for scaling throughput in electronics manufacturing.}, subject = {Pikosekundenbereich}, language = {en} } @inproceedings{FranzRothRungetal.2021, author = {Franz, Daniel and Roth, Gian-Luca and Rung, Stefan and Esen, Cemal and Hellmann, Ralf}, title = {Superimposed beam deflection using acousto-optical deflectors in combination with a galvanometer scanner}, series = {Lasers in Manufacturing - LiM 2021}, booktitle = {Lasers in Manufacturing - LiM 2021}, year = {2021}, subject = {Galvanometer}, language = {en} }