Refine
Document Type
- Article (3)
- Conference Proceeding (1)
Language
- English (4)
Is part of the Bibliography
- yes (4)
Keywords
High-resolution Interferometric Measurement of Thickness Change on a Lithium-Ion Pouch Battery
(2019)
Volume change of graphite leads to change in thickness of battery storage layers during discharging and charging. Pouch cell lithium ion batteries are used in the field of electric vehicles and solar home storage. This paper shows a measurement setup for the three-dimensional measurement of thickness change on a flat 6.7mm thick pouch cell using a white light interferometer. With a measuring field of 7.05mm diameter the resulting 3D thickness change record contains 226000 3D readings. The measuring points have a lateral distance of 13.1μm. The repeatability of the measurement is 312.8nm for the individual values and 64.1nm for the average value. In addition, this paper shows how the storage capacity of this pouch cell drops over 30 charge cycles.
An optical measuring method is presented, with which it is possible to measure and evaluate reflective cylindrical surfaces using a combination of deflectometry and subsequent reconstruction of the surface. The system is set up and tested on rolling elements of cylindrical roller bearings. However, it is not limited to this use case and can be applied to other cylindrical specular surfaces. The system distinguishes itself from existing test methods through the combination of high-resolution three-dimensional defect measurement with a very short recording time, and offers the possibility of introducing tolerance limits in the production of cylindrical specular surfaces. With this method, it is possible to record a defect with the dimensions of 1.3 mm by 1.8 mm within 5 s and to reconstruct the absolute depth. The resolution of the system is below 10 μm in both X- and Y-direction, and is therefore sufficiently accurate to detect typical surface defects such as scratches, dents, or deformations. To validate the measured values of the system, the results of an artificially generated 10.35 μm deep defect location were compared with those of a highly accurate mechanical stylus measurement.