TY - BOOK A1 - Steinmann, Gerald A. A1 - Fischer, Manfred A1 - Loy, Hardy A1 - Teichgräber, Burkhard T1 - Fachkraft für Abwassertechnik - Handbuch für Umwelttechnische Berufe, Band 3 Y1 - 2015 SN - 978-3-88721-251-3 PB - DWA CY - Hennef ET - 10 ER - TY - JOUR A1 - Drenkard, Hannah A1 - Fischer, Christian A1 - Sauer, Veit A1 - Gehlen, Christoph T1 - On the Chloride Distribution in Concrete and Mortar Samples after an RCM Test JF - Materials N2 - It is of essential need to face the challenges of CO2 reduction in industrial cement and concrete production reliable test methods in order to evaluate the performance of concretes, especially with regard to the service life of our infrastructure. The rapid chloride migration test (RCM test) is a standard method to assess the resistance against chloride ingress of concrete. However, during our study, certain critical questions arose with regard to the chloride distribution. The sharp chloride ingress front based on the model assumptions contradicted the shallow gradient of the experimental data. For this reason, investigations on chloride distribution in concrete and mortar samples after RCM tests were performed. The focus was on the factors influencing the extraction, e.g., time after RCM test and the location on sample. Furthermore, differences between concrete and mortar samples were investigated. The investigations showed that no sharp gradient on concrete samples was found due to the extremely uneven chloride front. In contrast, the theoretical profile shape was instead demonstrated on mortar specimens. The prerequisite for this result is that the drill powder must be taken directly after the completion of the RCM test from very uniform penetration areas. Thus, the model assumptions on the chloride distribution via the RCM test could be confirmed. KW - chloride profile; RCM test; drill powder; concrete; mortar; chloride migration coefficient; chloride ingress front Y1 - 2023 U6 - https://doi.org/10.3390/ma16082952 SN - 1996-1944 VL - 16 IS - 8 SP - 2952 EP - 2952 ER - TY - BOOK A1 - Bergner, Harald T1 - Rißbreitenbeschränkung zwangbeanspruchter Bauteile aus hochfestem Normalbeton BT - DAfStb Y1 - 1997 UR - http://permalink.bibkatalog.de/BV011641637 IS - 482 PB - Beuth ER - TY - CHAP A1 - Langner, Normen A1 - Kleuderlein, Jonas A1 - Kukovec, Sara T1 - Practicability of New and Innovative Products BT - Method for the Evaluation of Innovative Façade Components N2 - In construction, for general contractors the use of newly developed products is always a risk and therefore often leads to the rejection of innovative components. The reason is the lack of practical experience as well as normative regulations and test certificates. Furthermore, instruc-tions and re¬commendations for the use under certain boundary conditions are also missing. Due to this reason, a simple method was developed to review the practicability of new and in-novative products in façade constructions. With specific technical questions developed with façade consultants the evaluation of innovative façade components for planning, erection, uti-lization, and demolition is possible. The aim was to make a substantial evaluation of innovative façade components regarding their practicability as well as the influence of the new product on resource efficiency and durability. Therefore, the cost-benefit analysis was chosen for the eval-uation. The methodology was divided into two main process steps: in the first step the product is evaluated by means of predetermined selection answers and in the second step, a weighting ratio of the different criteria is set by the user. In total, the review consists of four main criteria, which are divided into 16 fine criteria with an overall of 40 evaluation questions. Thereby, the main criteria are differentiated according to the life cycle of a building and include planning, construction, operation, and removal of the building. The results of the assessment of new and innovative façade components evaluate the potential of the new product to meet the requirements as part of future facade structures and identify weaknesses and risks of the products at an early stage. With this, the co-operation between manufacturers and executing companies can be tightened to optimize products before their market launch, especially in terms of practicability, durability and resource efficiency. KW - facade components, innovation, durability, cost-benefit analysis Y1 - 2017 ER - TY - JOUR A1 - Steinmann, Gerald A. T1 - Betriebserfahrungen mit Biofiltern zur Abwasserreinigung - DWA-Arbeitsbericht JF - Korrespondenz Abwasser Y1 - 2014 SN - 0341-1540 VL - 61 IS - 9 SP - 769 EP - 769 CY - Hennef ER - TY - JOUR A1 - Löhr, Armin T1 - Schubsicherung mit oben offenen Bügeln JF - Beton-und Stahlbetonbau Y1 - 1985 UR - http://permalink.bibkatalog.de/BV019538598 ER - TY - CHAP A1 - Löhr, Armin A1 - Rehm, G. A1 - Eligehausen, R. T1 - Schubsicherung mit oben offenen Bügeln T2 - Bericht des Instituts für Werkstoffe im Bauwesen der Universität Stuttgart Y1 - 1984 ER - TY - CHAP A1 - Löhr, Armin A1 - Sawade, G. ED - Eligehausen, R. T1 - Holografische Interferometrie BT - Anwendung in der Bautechnik T2 - Werkstoffe und Konstruktion Y1 - 1989 ER - TY - CHAP A1 - Löhr, Armin ED - Eligehausen, R. T1 - Schnelle Standfestigkeit von fließfähigen Vergußbetonen T2 - Werkstoffe und Konstruktion Y1 - 1999 ER - TY - CHAP A1 - Löhr, Armin ED - Eligehausen, R. T1 - Schubsicherung durch oben offene Bügel T2 - Werkstoffe und Konstruktion Y1 - 1984 ER - TY - CHAP A1 - Löhr, Armin A1 - Nürnberg, U. T1 - Korrosion von Stahl in Beton T2 - Deutscher Ausschuss für Stahlbeton Y1 - 1988 IS - 393 CY - Nürnberg ER - TY - JOUR A1 - Volz, Michael T1 - Fatigue strength of repair-welded headed studs JF - ce/papers: 11th International Symposium on Steel Bridges 2024 N2 - Welded connections of headed studs are highly stressed details in bridge structures in steel-concrete composite construction and are largely responsible for the functionality of the supporting structures. At the same time, this detail requires a lot of resources due to the high welding effort and therefore has a major influence on the economic success. An important criterion for the economic and ecological balance of the structure is the durability of the welded joint, which is quantified by the fatigue strength. The welding of headed studs for composite bridges is usually carried out using fully mechanised drawn arc stud welding in accordance with EN ISO 14555. Due to the process, stud welds that do not fulfil the standard requirements for flawless condition may occur in individual cases. The design rules for stud load-bearing capacity in accordance with EN 1994-2 are based on tests and only apply to connections produced using drawn arc stud welding. In the past, there were practicable and tacitly accepted solutions for repairing such sporadically occurring faulty welds, but these were never systematically investigated. Particularly against the background of fatigue loading, repair-welded stud connections are now to be systematically investigated in a project funded by the AIF. The article provides an overview of the execution of stud welded joints and presents the tests planned in the project in order to achieve a practicable recommendation for the repair welding of headed studs. Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:863-opus-57566 VL - 7 IS - 3-4 PB - Ernst & Sohn ER - TY - CHAP A1 - Langner, Normen A1 - Brunn, Ansgar A1 - Voellner, David T1 - Drone-based Optimization And Validation Of Numerical Simulations Of Urban Heat Islands T2 - SimBuild 2024 - Eleventh National Conference of IBPSA-USA, Denver, 2024 N2 - In this ongoing research project, advanced drone technology is employed in conjunction with simula-tion models to assess the impacts of urban climate, with a specific focus on Urban Heat Islands (UHI). The novel methodology was tested in the historical downtown areas of two German cities. Through the creation of high-resolution 3D-models of urban structures and the analysis of material properties, the research project aims to accurately predict the cli-mate impacts of urban planning decisions.The results of the project provide planners with pre-cise insights for evaluating adaptation measures and mitigating the adverse effects of climate change in cities, ultimately improving living conditions there-in. The research undertaking also pioneers the use of high-temporal-resolution drone data for analyzing temperature patterns and considers various contribu-tions to the heat island effect for comprehensive climate-adaptive urban planning. Y1 - 2024 UR - https://publications.ibpsa.org/conference/paper/?id=simbuild2024_2132 ER - TY - BOOK A1 - Steinmann, Gerald A. T1 - Bemessung von Tropfkörperanlagen, Anlagen mit Rotationstauchkörpern und Anlagen mit getauchten Festbetten - Arbeitsblatt DWA-A 281 (2021-11, Gelbdruck) Y1 - 2021 SN - 978-3-96862-135-7 CY - Hennef ER - TY - JOUR A1 - Steinmann, Gerald A. ED - Disse, M. ED - Kalk, M. ED - Rieger, W. T1 - Wasserrückhalt in der Fläche und "Jahrhunderthochwasser" JF - Mitteilungen Universität der Bundeswehr, Institut für Wasserwesen Y1 - 2008 SN - 0720-1273 IS - 100 SP - 127 EP - 127 PB - Shaker CY - Aachen ER - TY - JOUR A1 - Steinmann, Gerald A. T1 - Neue Erkenntnisse über Anlagen mit getauchtem Festbett - DWA-Arbeitsbericht JF - Korrespondenz Abwasser Y1 - 2002 SN - 0341-1540 VL - 49 IS - 12 SP - 1703 EP - 1703 CY - Hennef ER - TY - JOUR A1 - Steinmann, Gerald A. T1 - Wasserrückhalt in der Fläche und "Jahrhunderthochwasser" JF - Mitgliederrundbrief DWA Landesverband Bayern Y1 - 2009 IS - 1 SP - 4 EP - 4 PB - Deutsche Vereinigung für Wasserwirtschaft, Abwasser und Abfall e.V. (DWA), Landesverband Bayern CY - München ER - TY - CHAP A1 - Medgenberg, Justus A1 - Andreas, Makowski T1 - Entwicklung einer Methodik zur Ableitung von Sanierungsstrategien mit mathematischer Optimierung T2 - Bauphysiktage in Weimar 2024 N2 - Die energetische Bestandssanierung hat für die Dekarbonisierung des Gebäudesektors eine entscheidende Funktion. Um Ressourcen bestmöglich einsetzen, ist die ganzheitliche Betrachtung und Optimierung von Sanierungsentscheidungen sinnvoll. Mathematische Optimierungsverfahren werden im deutschsprachigen Raum für diese Entscheidungs-findung bisher kaum genutzt. Vorgestellt wird eine neue Methodik, die mittels eines Metamodells auf Basis punktueller Simulationsergebnisse die Optimierung variabler Zielfunktionen erlaubt. Die Stärke der Methode liegt in der Anwendbarkeit für eine große Zahl von Sanierungskombinationen bei minimiertem Rechenaufwand. Ergebnisse für reale Sanierungsprojekte werden anhand eines exemplarisch untersuchten Einfamilienhaus vorgestellt. Dabei werden unterschiedliche Zielfunktionen betrachtet und optimierte Sanierungs-strategien abgeleitet. Derzeit ist die Methode für die Bewertung des Heizwärmebedarfs von Wohn-gebäuden anwendbar. Es sind verschiedene Erweiterungen denkbar und geplant. Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:863-opus-61971 ER - TY - JOUR A1 - Medgenberg, Justus T1 - Anwendung von mathematischer Optimierung für eine effiziente energetische Sanierungsplanung N2 - Die energetische Bestandssanierung hat für die Dekarbonisierung des Gebäudesektors eine entscheidende Funktion. Um Ressourcen bestmöglich einzusetzen, ist die ganzheitliche Quantifizierung und Optimierung von Sanierungsentscheidungen sinnvoll. Die Anwendung von mathematischen Optimierungsverfahren bietet Potenzial, das bisher vor allem im deutschsprachigen Raum kaum genutzt wird. Vorgestellt wird eine neue Methodik, die mittels eines mathematischen Ersatzmodells die Optimierung variabler Zielfunktionen erlaubt. Das Modell wird anhand von punktuellen Gebäudesimulationen kalibriert. Die Stärke der vorgestellten Methode liegt in der Analyse einer sehr großen Zahl von Sanierungskombinationen bei minimalem Rechenaufwand. Die Anwendbarkeit auf reale Objekte wird anhand von zwei unterschiedlichen exemplarischen Wohngebäudetypen demonstriert. Resultierende Sanierungsstrategien aus der Analyse werden beispielhaft für drei verschiedene Zielfunktionen mit Investitions- und Betriebskosten sowie CO2-Ausstoß bei unterschiedlichen Restriktionen dargestellt. Derzeit ist die vorgestellte Methode für die Bewertung und Optimierung des Heizwärmebedarfs von Wohngebäuden anwendbar. Es sind verschiedene Erweiterungen der Methodik angedacht. KW - Optimierung KW - mathematische Optimierung KW - energetische Sanierung KW - Sanierungsstrategie Y1 - 2024 U6 - https://doi.org/10.1002/bapi.202400013 VL - 46 IS - 3 SP - 142 EP - 153 ER - TY - CHAP A1 - Medgenberg, Justus A1 - Makowski, Andreas T1 - Work in Progress: Methodik zur Ableitung von Sanierungsstrategien für Nichtwohngebäude im Bestand mittels mathematischer Optimierung T2 - BauSIM 2024 in Wien N2 - Die energetische Bestandssanierung hat für die Dekarbonisierung des Gebäudesektors in Europa eine entscheidende Funktion. Mathematische Optimierungsverfahren können für eine ganzheitliche Betrachtung und Optimierung von Sanierungsentscheidungen eingesetzt werden. Sie ermöglichen einen effizienten Einsatz von knappen personellen, finanziellen und materiellen Ressourcen. Die Verbreitung in der Praxis ist allerdings bisher nur sehr gering. Das Autorenteam erkennt hier strukturell bisher nicht genutztes Potenzial und stellt neue Ergebnisse zum Einsatz einer entwickelten Optimierungsmethodik zur Ableitung von Sanierungsstrategien für Bestandsgebäude vor. Die Methodik berücksichtigt in der Zielfunktion wahlweise Kostenaspekte und CO2-Ausstoß und wird hier erstmals auf ein fiktives Nichtwohngebäude mit zwei unterschiedlichen Nutzungstypen angewendet. Die Optimierung erfolgt exemplarisch hinsichtlich der Reduktion des betriebsbedingten CO2-Ausstoßes. Die Ergebnisse zeigen die vielversprechende Anwendbarkeit der Methodik zur Ableitung von Sanierungsstrategien für Bestandsgebäude. Y1 - 2024 ER - TY - CHAP A1 - Steinmann, Gerald A. T1 - Tropfkörper, Tauchkörper und getauchte Festbetten : was bringt das neue DWA-A 281? Nürnberger Wasserwirtschaftstage 2022 Y1 - 2022 ER - TY - CHAP A1 - Bergner, Harald T1 - Tragwerksentwurf und Vorbemessung T2 - Schneider Bautabellen für Architekten Y1 - 2022 SN - 978-3-8462-1315-5 PB - Reguvis Verlag ET - 25. ER - TY - CHAP A1 - Bergner, Harald T1 - Tragwerksentwurf und Vorbemessung T2 - Schneider Bautabellen für Ingenieure Y1 - 2022 SN - 978-3-8462-1316-2 PB - Reguvis Verlag ET - 25. ER - TY - CHAP A1 - Bergner, Harald T1 - Tragwerk und Konstruktion T2 - Praxishandbuch Immobilienwirtschaft Y1 - 2022 SN - 978-3-8462-1096-3 SP - 597 EP - 614 PB - Reguvis Verlag ER - TY - RPRT A1 - Reuther, Iris M. T1 - Die temporäre Senkung der Umsatzsteuersätze - was bedeutet sie für Architekten und ihre Baustellen? N2 - Die zum Juli 2020 und damit sehr kurzfristig anstehende temporäre Senkung der Mehrwert- bzw. Umsatzsteuersätze wirft viele Fragen auf. Vor allem erwartbare Folgen auf die Abwicklung laufender Baustellen werden in diesem Arbeitspapier skizziert. KW - Bauabwicklung KW - Objektüberwachung KW - Abrechnung von Bauleistungen KW - Temporäre Senkung der Umsatzsteuersätze Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:863-opus-18142 ER - TY - BOOK A1 - Dannhäuser, Nikolaj A1 - Schwarz, Benjamin ED - Kaiser, Marcus ED - Leistner, Dieter ED - Niese, Stefan T1 - mikro makro N2 - "Gezeigt werden kleinmaßstäbliche Architekturen und deren dreidimensionaler Kosmos. Diese stehen im Dialog mit großformatigen Photographien, die in die räumliche Tiefe dieser skulpturalen Arbeiten vordringen und neue Perspektiven eröffnen". (Lehmanns Media) KW - Architekturmodell KW - Architekturfotografie KW - Ausstellung KW - Würzburg Y1 - 2017 UR - http://permalink.bibkatalog.de/BV044200869 SN - 978-3-9810428-2-5 PB - edition querfeldein CY - Würzburg ER - TY - CHAP A1 - Bergner, Harald T1 - Beitrag Tragwerksentwurf und Vorbemessung T2 - Bautabellen für Architekten Y1 - 2014 UR - http://permalink.bibkatalog.de/BV041625913 PB - Bundesanzeiger ER - TY - CHAP A1 - Bergner, Harald T1 - Beitrag Tragwerksentwurf und Vorbemessung T2 - Bautabellen für Ingenieure Y1 - 2014 UR - http://permalink.bibkatalog.de/BV041745542 PB - Bundesanzeiger ER - TY - JOUR A1 - Bergner, Harald T1 - Messeturm Frankfurt am Main BT - Bauausführung JF - Beton- und Stahlbetonbau Y1 - 1991 UR - http://permalink.bibkatalog.de/BV019538598 PB - Ernst & Sohn ER - TY - BOOK A1 - Bergner, Harald T1 - Hochfester Beton, Sachstandsbericht Teil 2 BT - Bemessung und Konstruktion; DAfStb Heft 438 Y1 - 1994 UR - http://permalink.bibkatalog.de/BV009469106 PB - Beuth ER -