TY - CHAP A1 - Kasten, Henning A1 - Redemann, Christian T1 - Influence on unbalanced magnetic pull T2 - Proceedings of the 14th International Symposium on Magnetic Bearings (ISMB14) N2 - This article describes the effects of the unbalanced magnetic pull and the opportunities to suppress asymmetries of the air gap field. Y1 - 2014 SP - 758 EP - 761 ER - TY - CHAP A1 - Messager, Gael A1 - Che, Guoyi A1 - Kasten, Henning A1 - Redemann, Christian T1 - Optimization of axial magnetic bearing for application of vibration assisted drilling T2 - IKMT 2022; 13. GMM/ETG-Symposium, Linz, Austria N2 - Thrust magnetic bearing characteristics are frequency dependent due to the eddy-currents inducted inside magnetic parts that oppose any change of magnetic flux in the inner parts. When used as linear actuator for vibration assisted drilling in industrial production, eddy-currents limit the maximum achievable stroke and vibration frequency with active thrust bearing. This reduces tool-feed rate or shortens tool average useful life. After introducing the problem, material properties and shape optimization are evaluated and compared in the frequency range of interest for vibration assisted drilling. While material properties are determinant, mechanical constraints often limit the selection to materials with significant electrical conductivity. Eddy-current effect can only be partially mitigated with shape optimization. Y1 - 2022 UR - https://ieeexplore.ieee.org/document/10025986 SN - 978-3-8007-5938-5 SP - 1 EP - 6 PB - VDE ER - TY - GEN A1 - Kasten, Henning A1 - Redemann, Christian A1 - Wolff, Nikolai T1 - Vorrichtung zur Messung physikalischer Größen eines Messmotors und diesbezügliches Messverfahren (Patent, DE 10 2016 121 085 B3) N2 - Die Erfindung betrifft eine Messvorrichtung (10) zur Messung physikalischer Größen eines Messmotors (12), umfassend einen zu messenden Messmotor (12) mit einem Messstator (14) und einem Messrotor (16) und einen Belastungsmotor (18) mit einem Belastungsstator (20) und einem Belastungsrotor (20). Der Messmotor (12) kann ein elektrischer Antriebsmotor oder ein elektrischer Generator sein und kann als Außen- oder Innenläufer konzipiert sein. Es wird vorgeschlagen, dass der Messrotor (16) und der Belastungsrotor (20) zu Ausbildung einer Rotoreinheit (32) mit einem Messrotorabschnitt (34) und einem Belastungsrotorabschnitt (36) drehfest miteinander gekoppelt sind, und die Rotoreinheit (32) einseitig im Messmotor (12) oder im Belastungsmotor (18) gelagert ist, so dass die Rotoreinheit (32) im verbleibenden Motor ungelagert drehbar ist. In einem nebengeordneten Aspekt schlägt die Erfindung ein Messverfahren zur indirekten Bestimmung elektromechanischer Größen eines Messmotors (12) unter Verwendung der Messvorrichtung (10) vor. Durch die Messvorrichtung wird eine exakte messtechnische Bestimmung elektromechanischer Betriebsgrößen bei Höchstdrehzahlmotoren wie z.B. Turbomolekularpumpen ermöglicht. Y1 - 2017 UR - https://patents.google.com/patent/DE102016121085B3/de ER -