TY - CHAP A1 - Machin, Graham A1 - Hartmann, Jürgen A1 - Anhalt, Klaus A1 - Beyon, G. A1 - Edler, F. A1 - Fourez, S. A1 - Jimeno-Largo, p. A1 - Lowe, D. A1 - Morice, R. A1 - Sadli, M. A1 - Villamanan, M. T1 - Future perspectives for high-temperature metrology from the FP5 HIMERT project BT - Metrologie 2005 Y1 - 2005 CY - Lyon (Frankreich) ER - TY - CHAP A1 - Hartmann, Jürgen A1 - Machin, Graham A1 - Beynon, G. A1 - Fourrez, S. A1 - Lowe, D. A1 - Morice, R. A1 - Sadli, M. A1 - Villamanan, M. T1 - HIMERT: A pan-European project for development of metal-carbon eutectics as temperature standards BT - Temperature 2002 Y1 - 2002 CY - Chicago (USA) ER - TY - CHAP A1 - Hartmann, Jürgen A1 - Sadli, M. A1 - Machin, G. A1 - Morice, R. ED - Fellmuth, B. ED - Seidel, J. ED - Scholze, G. T1 - Realisation and comparison of metal-carbon eutectic points for radiation thermometry applications and W-Re thermocouple calibration T2 - Proc. 8th Int. Symp. on Temperature and Thermal Measurements in Industry and Science - Proceedings of Tempmeko 2001 N2 - For the sake of ensuring improved accuracy and traceability for temperature measurements above the copper point (1084 OC), four laboratories are joining their efforts in developing high-temperature fixed points based on eutectic transitions of metal-carbon mixtures [1]. These phase transitions, on the basis of radiation thermometry results presented thus far [2, 3], encouraged the participants to work towards two eventual applications: hightemperature fixed—point calibration sources for radiation thermometry, and fixed points for the calibration of contact thermometers, including Pt/Pd, Pt/Rh and W/Re thermocouples. Here will be given the up-to—date works accomplished within or in relation with this project in the participating laboratories. The perspectives of this work are wide and should allow the usage of such fixed points at temperatures ranging from 1150 C to 2700 C. The remaining uncertainty concerns the … Y1 - 2002 UR - https://www.researchgate.net/profile/Graham_Machin/publication/259712992_Realisation_and_comparison_of_metal-carbon_eutectic_points_for_radiation_thermometry_applications_and_W-Re_thermocouple_calibration/links/02e7e52d6c8d4c143c000000.pdf SP - 507 EP - 512 PB - VDI Verlag CY - Berlin ER - TY - CHAP A1 - Hartmann, Jürgen A1 - Machin, G A1 - Beynon, G A1 - Edler, F A1 - Fourrez, S A1 - Lowe, D A1 - Morice, R A1 - Sadli, M A1 - Villamanan, M T1 - HIMERT BT - A pan‐European project for the development of metal‐carbon eutectics as temperature standards T2 - AIP Conference Proceedings N2 - Metal‐carbon eutectic mixtures show much promise for high‐temperature standards applications. A research project, Novel, High temperature, Metal‐carbon Eutectic fixed points for Radiation Thermometry, Radiometry and Thermocouples (HIMERT) was accepted by the European Union (submitted under the Framework 5 Growth Programme) with a view to developing a unified European approach to these standards. The objectives of the project are to develop fixed‐point cells both for radiation thermometry/radiometry and contact thermometry calibration applications. In total three sets of cells will be developed, two for radiation thermometry (by BNM‐INM and NPL) and one for contact sensors (by BNM‐LNE) and comparisons performed of the differing crucible designs. The cells developed for radiation thermometry will be calibrated according to the ITS‐90 and measured radiometrically by a third participant (PTB … Y1 - 2003 SN - 0-7354-0153-5 SP - 285 EP - 290 PB - American Institute of Physics ER -