TY - JOUR A1 - Herrmann, Volker A1 - Heinrich, A. T1 - Influence of the modification of ground truck tyres as an additive on the properties of a truck tread compound JF - International Polymer Science and Technology N2 - Commercially available ground tyre rubber (GTR) made exclusively from post-consumer truck tyres was mixed into a typical truck tyre tread compound. As already shown in a previous study, this leads to a distinct deterioration in properties. The goal of the present investigation was to minimise these property losses through modification of the GTR in terms of processing methods. Modification methods already documented in the literature were used, e.g. application of sulphur and crosslinking agents to the GTR and the use of trans-polyoctenamer as well as liquid polymers, which in principle provide the potential for crosslinking of the GTR and polymer matrix through the availability of double bonds. For some methods of modification, small improvements are observed in comparison with the unmodified GTR. However, none of the GTR modifications reaches the level of the reference compound without GTR. An economic estimate for the modification with the highest potential for technical success shows that, in practice, considerable costs must be expected. Y1 - 2017 U6 - https://doi.org/10.1177/0307174X1704400501 VL - 44 IS - 5 SP - T/1 EP - T/9 ER - TY - JOUR A1 - Herrmann, Volker A1 - Schulz, A. T1 - Der Einfluss von Lkw-Reifenmehl als Additiv auf die Eigenschaften einer Lkw-Laufflächenmischung JF - Gummi Fasern Kunststoffe GAK N2 - Commercially available ground tire rubber (GRT) was mixed into a typical truck tire tread compound. The GRT originated from postconsumer truck tires and differed in the manufacturing process (cryogenic and warm grinding, resp.) as well as the ageing state. Regardless of the grinding process type, the vulcanizates containing GRT became softer, mechanical properties and the abrasion resistance worse and the Payne effect decreased. Additional artificial ageing of the GRT showed no further effects regarding property changes when adding GRT. Based on the vulcameter curves it could be seen, that the curing behaviour of the compounds changed and the crosslink density of the matrix obviously decreased by adding GRT. Additional ¡jXRF images and measurements for dynamic local indentation indicated increased sulphur content inside the GRT particles. Y1 - 2016 VL - 69 SP - 698 EP - 705 ER - TY - JOUR A1 - Herrmann, Volker A1 - Naß, Felix A1 - Lemmich, Sebastian A1 - Wachter, Florian T1 - Einfluss des EFE-Spritzsystems auf Heizzeitreduzierung und Eigenschaften der gespritzten Bauteile - Teil 1: „Betrachtung der Heizzeitreduzierung über reaktionskinetische Berechnung und begleitende Untersuchungen zu Bauteil- und Vernetzungsdichte mittels NMR-Bildgebung“ JF - Gummi Fasern Kunststoffe GAK Y1 - 2013 UR - http://permalink.bibkatalog.de/BV002585962 VL - 66 SP - 37 EP - 42 ER - TY - JOUR A1 - Herrmann, Volker A1 - Naß, Felix A1 - Lemmich, Sebastian A1 - Wachter, Florian T1 - Einfluss des EFE-Spritzsystems auf Heizzeitreduzierung und Eigenschaften der gespritzten Bauteile - Teil 3: „Abschätzung der Scherenergie und Einfluss der Drossel auf ausgewählte Eigenschaften der gespritzten Bauteile“ BT - Teil 3: „Abschätzung der Scherenergie und Einfluss der Drossel auf ausgewählte Eigenschaften der gespritzten Bauteile“ JF - Gummi Fasern Kunststoffe GAK Y1 - 2013 UR - http://permalink.bibkatalog.de/BV002585962 VL - 66 SP - 180 EP - 184 ER - TY - JOUR A1 - Herrmann, Volker A1 - Naß, Felix A1 - Lemmich, Sebastian A1 - Wachter, Florian T1 - Einfluss des EFE-Spritzsystems auf Heizzeitreduzierung und Eigenschaften der gespritzten Bauteile - Teil 2: „Einfluss der Verfahrensparameter des Spritzgießprozesses auf die Heizzeitreduzierung“ JF - Gummi Fasern Kunststoffe GAK Y1 - 2013 UR - http://permalink.bibkatalog.de/BV002585962 VL - 66 SP - 108 EP - 112 ER - TY - JOUR A1 - Herrmann, Volker A1 - Heinrich, A. T1 - Einfluss der Modifikation von LKW-Reifenmehl als Additiv auf die Eigenschaften einer LKW-Laufflächenmischung JF - Gummi Fasern Kunststoffe GAK Y1 - 2017 VL - 70 SP - 88 EP - 95 ER - TY - JOUR A1 - Herrmann, Volker A1 - Speyer, Y. A1 - Leiber, J. T1 - Herstellung und Verarbeitung von sortenreinem Gummimehl im Labormaßstab JF - Gummi Fasern Kunststoffe GAK Y1 - 2017 VL - 70 SP - 240 EP - 247 ER - TY - JOUR A1 - Herrmann, Volker A1 - Schulz, A. T1 - Influence of ground truck tires as an additive on the properties of a truck tread compound JF - Rubber Fibres Plastics RFP Y1 - 2018 VL - 13 SP - 24 EP - 30 ER -