TY - CHAP A1 - Strobel, Norbert A1 - Meissner, Oliver A1 - Boese, Jan A1 - Brunner, Thomas A1 - Heigl, Benno A1 - Hoheisel, Martin A1 - Lauritsch, Günter A1 - Nagel, Markus A1 - Pfister, Marcus A1 - Rührnschopf, Ernst-Peter A1 - Scholz, Bernhard A1 - Schreiber, Bernd A1 - Spahn, Martin A1 - Zellerhoff, Michael A1 - Klingenbeck-Regn, Klaus T1 - 3D Imaging with Flat-Detector C-Arm Systems T2 - Multislice CT - Medical Radiology N2 - Three-dimensional (3D) C-arm computed tomography is a new and innovative imaging technique. It uses two-dimensional (2D) X-ray projections acquired with a flat-panel detector C-arm angiography system to generate CT-like images. To this end, the C-arm system performs a sweep around the patient, acquiring up to several hundred 2D views. They serve as input for 3D cone-beam reconstruction. Resulting voxel data sets can be visualized either as cross-sectional images or as 3D data sets using different volume rendering techniques. Initially targeted at 3D high-contrast neurovascular applications, 3D C-arm imaging has been continuously improved over the years and is now capable of providing CT-like soft-tissue image quality. In combination with 2D fluoroscopic or radiographic imaging, information provided by 3D C-arm imaging can be valuable for therapy planning, guidance, and outcome assessment all in the interventional suite. Y1 - 2009 SN - 978-3-540-33125-4 SN - 978-3-540-33124-7 U6 - https://doi.org/10.1007/978-3-540-33125-4_3 SP - 33 EP - 51 PB - Springer CY - Berlin, Heidelberg ET - 3. ER - TY - CHAP A1 - Hartmann, Jürgen A1 - Knopp, Kevin A1 - Lenski, Philipp A1 - Zänglein, Marc A1 - Manara, Jochen A1 - Stark, Thomas A1 - Zipf, Matthias A1 - Arduini, Mariacarla A1 - Schreiber, Ekkehard A1 - Krüger, U. A1 - Brunner, Martin T1 - Optische Sensorik für die additive Fertigung T2 - 4SMARTS 2019 Y1 - 2019 SN - 978-3-8440-6425-4 SP - 105 EP - 116 ER - TY - CHAP A1 - Hartmann, Jürgen A1 - Knopp, Kevin A1 - Lenski, Philipp A1 - Ochs, Dennis A1 - Zänglein, Marc A1 - Manara, Jochen A1 - Stark, Thomas A1 - Zipf, Matthias A1 - Arduini, Mariacarla A1 - Schreiber, Ekkehard A1 - Krüger, U. A1 - Schmidt, Franz A1 - Brunner, Martin T1 - Optische Sensorik für die additive Fertigung T2 - Sensoren und Messsysteme 2019 Y1 - 2019 CY - Nürnberg ER - TY - CHAP A1 - Hartmann, Jürgen A1 - Manara, Jochen A1 - Zipf, Matthias A1 - Stark, Thomas A1 - Knopp, Kevin A1 - Zänglein, Marc A1 - Schreiber, Ekkehard A1 - Schmidt, Franz A1 - Brunner, Martin A1 - Müller, Michael T1 - Experimental set-up for dynamic material investigation at high temperatures T2 - Sensors and Measuring Systems; 19th ITG/GMA-Symposium N2 - Energy efficiency and operation safety in energy conversion, process technology, and aerospace engineering requires advanced material investigation, in particular at high temperatures to characterize the materials and components. Additionally, modern additive manufacturing methods, in particular the 3D metal laser printer requires a detailed control of the melting temperature. Many applications are based on a layered structures, e.g. thermal barrier coatings in gas turbines. Also components manufactured by additive manufacturing pose a layered structure. In these structures the mechanical contact between the layers and to the substrate is of high interest. Besides, the complete characterisation of the additive manufactured component is important for its later application. To cope with these new demands, the University of Applied Sciences Wuerzburg - Schweinfurt (FHWS) and the Bavarian Center for Applied … Y1 - 2018 UR - https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8436229 SN - 978-3-8007-4683-5 SP - 516 EP - 519 PB - VDE Verlag ER - TY - GEN A1 - Hartmann, Jürgen A1 - Knopp, Kevin A1 - Zänglein, Marc A1 - Manara, Jochen A1 - Stark, Thomas A1 - Zipf, Matthias A1 - Schreiber, Ekkehard A1 - Krüger, U. A1 - Brunner, Martin A1 - Müller, Michael T1 - Messsystem für dynamische Materialuntersuchung bei hohen Temperaturen BT - Sensoren und Messsysteme 2018 (Poster) Y1 - 2018 CY - Nürnberg ER - TY - CHAP A1 - Hartmann, Jürgen A1 - Knopp, Kevin A1 - Lenski, Philipp A1 - Zänglein, Marc A1 - Manara, Jochen A1 - Stark, Thomas A1 - Zipf, Matthias A1 - Arduini, Mariacarla A1 - Schreiber, Ekkehard A1 - Krüger, U. A1 - Schmidt, Franz A1 - Brunner, Martin T1 - Optical Sensor systems for additive manufacturing BT - Tempmeko 2019 Y1 - 2019 CY - Chengdu (China) ER - TY - CHAP A1 - Hartmann, Jürgen A1 - Knopp, Kevin A1 - Lenski, Philipp A1 - Zänglein, Marc A1 - Manara, Jochen A1 - Stark, Thomas A1 - Zipf, Matthias A1 - Arduini, Mariacarla A1 - Schreiber, Ekkehard A1 - Krüger, U. A1 - Schmidt, Franz A1 - Brunner, Martin T1 - Sensor systems for additive manufacturing Y1 - 2018 PB - Key Note Lecture MSE 2018 CY - Darmstadt ER - TY - CHAP A1 - Hartmann, Jürgen A1 - Manara, Jochen A1 - Zipf, Mathias A1 - Stark, Thomas A1 - Knopp, Kevin A1 - Zänglein, Marc A1 - Lenski, Philipp A1 - Schreiber, Ekkehard A1 - Schmidt, Franz A1 - Brunner, Martin A1 - Müller, Michael T1 - Thermophysical property measurements at high-temperatures for power engineering and additive manufacturing processes BT - QIRT 2018, 25 - 29 June 2018, Berlin, Germany N2 - To address the needs for increasing efficiency in power conversion, stratified structures like thermal barrier coatings, are used to increase operation temperature. Also advanced material processing like 3D laser printing of metals and ceramics are based on a layer-to-layer process at high temperatures, resulting in non-homogeneous components. Both systems require more and more detailed investigation methods to characterise the material properties of the resulting structures and to optimize the relevant processes. To address the required needs in advanced material characterisation recently an attempt was started to develop a unique measurement set-up for advanced material characterisation. This method is based on the well know laser flash principle, which was improved by adding supplementary heating sources and additional detection channels. Combining different heating mechanism and heating times with the two-dimensional measuring of the thermal flow across the sample enables the determination of different opto-thermal parameters and other material properties, e.g. mechanical contact, electrical conductivity or optical data, which also depend on or affect the flow of heat. In this paper we describe the implementation of the different optical methods to measure the thermal heat flow by point-like and two-dimensional temperature measurement and present first results on several samples. KW - thermophysical property measurement KW - additive manufacturing process Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:863-opus-17678 SN - 978-3-940283-94-8 CY - Berlin ER -