@incollection{BraeutigamSawatzki, author = {Br{\"a}utigam, Volker and Sawatzki, Christina}, title = {Schritte einer Kanbaneinf{\"u}hrung}, series = {Fallstudien in der Logistik}, booktitle = {Fallstudien in der Logistik}, editor = {Hartel, Dirk H.}, publisher = {DVV}, address = {Hamburg}, isbn = {978-3-87154-472-9}, language = {de} } @article{BraeutigamHofmannWaschik, author = {Br{\"a}utigam, Volker and Hofmann, Jan and Waschik, Monika}, title = {Aufbau und Etablierung eines Lehrformates zur praxisnahen Vermittlung von Methoden und Kompetenzen zur Gesch{\"a}ftsmodellentwicklung und zur Sensibilisierung der Gr{\"u}ndungskultur}, series = {FHWS Science Journal}, volume = {5}, journal = {FHWS Science Journal}, number = {1}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:863-opus-19251}, pages = {82 -- 90}, abstract = {Nach Schulte ist in vielen akademischen Ausbildungen die transzendentale Integration von {\"o}konomischen Querfunktionen, insbesondere das heranwachsende »Gr{\"u}ndertum-Gen« ausbauf{\"a}hig. Ein Studium zum Intra- oder Entrepreneurship bildet zun{\"a}chst die Grundlage. Dar{\"u}ber hinaus muss zus{\"a}tzlich ebenfalls praktisch ausprobiert und erlebt werden. Dieses Erfahrungslernen gilt auch in der heutigen Zeit der digitalen Transformation...}, language = {de} } @article{HofmannWaschikBraeutigam, author = {Hofmann, Jan and Waschik, Monika and Br{\"a}utigam, Volker}, title = {Erfahrungslernen und Selbstdisziplin mit der Campus Startup Night zur Steigerung der Praxisfitness}, series = {FHWS Science Journal}, volume = {5}, journal = {FHWS Science Journal}, number = {1}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:863-opus-19261}, pages = {91 -- 96}, abstract = {Aufgrund der kontr{\"a}ren Situation zwischen Wirtschaftskraft und Gr{\"u}ndungszahlen in Mainfranken gilt es, ein regional wirkendes Format zu schaffen. Das Ziel ist es, die FHWS-initiierten Gr{\"u}ndungsaktivit{\"a}ten zu unterst{\"u}tzen und zuk{\"u}nftig aufrecht zu erhalten...}, language = {de} } @article{SaueressigBauerLoebmannetal., author = {Saueressig, Gabriele and Bauer, C. and L{\"o}bmann, Rebecca and Wunderlich, C. and Wilke, W. and Br{\"a}utigam, Volker and Arnholdt, J.}, title = {Zweite F{\"o}rderphase BEST-FIT: Maßnahmen zur Verbesserung von Bestehensquoten und Praxisfitness der Absolvierenden}, series = {Didaktik-Nachrichten}, volume = {12}, journal = {Didaktik-Nachrichten}, pages = {18 -- 26}, language = {de} } @inproceedings{RosiliusWilhelmSeitzetal., author = {Rosilius, Maximilian and Wilhelm, Markus and Seitz, Philipp and Von Eitzen, Ingo and Wirsing, Benedikt and Rabenstein, Markus and Decker, Steffen and Br{\"a}utigam, Volker}, title = {Equalization of the Visibility Loss between AR and Real Stimuli Sizes}, series = {2022 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct)}, booktitle = {2022 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct)}, publisher = {IEEE}, doi = {https://doi.org/10.1109/ISMAR-Adjunct57072.2022.00178}, pages = {821 -- 826}, abstract = {The results of the empirical study based on an AR Landolt C vision were examined to compare real and virtual visibility as a function of stimulus size on an HMD (e.g. MS HoloLens 2). A counterbalanced within-subject-design study with n = 32 probands was conducted. The results show on one hand a visibility loss between real and immersive systems by the same size of representation. On the other hand, a transfer function can be derived to ensure comparable visibility between the systems. This transfer function can be used to compensate for the visibility loss as a design guideline for immersive applications. In approximation, the Weber-Fechner's relation can be applied on AR visibility versus size of stimuli.}, language = {en} } @inproceedings{RosiliusWilhelmvonEitzenetal., author = {Rosilius, Maximilian and Wilhelm, Markus and von Eitzen, Ingo and Decker, Steffen and Damek, Sebastian and Br{\"a}utigam, Volker}, title = {Sustainable Solutions by the Use of Immersive Technologies for Repurposing Buildings}, series = {Global Conference on Sustainable Manufacturing}, booktitle = {Global Conference on Sustainable Manufacturing}, publisher = {Springer}, doi = {10.1007/978-3-031-28839-5_62}, pages = {551 -- 558}, abstract = {In the context of urban production and sustainable reuse of existing buildings, a detailed planning of the later usage is indispensable. One approach is to enable large-scale AR simulation on site with a sufficient Level of Detail (LoD) and stability. To determine performance metrics, a technology-stack is created and presented that enables a realistic field experiment in an industrial environment (area of 1,314 m2) using Microsoft HoloLens 2. For the experiment, a 3D model was instantiated as often as possible up to the limit of system stability and in different LoDs (100\% down to 10\%). The result shows that it is feasible to represent 2.63 million polygons (equivalent to about 1,909 m3 of augmented space) on LOD-35\%; LoD-100\% is equivalent to 327.38 m3 and 1,284 million polygons. Polygonal density [polygons/m3] is introduced as new indicator for better comparability when using 3D models. Thus, it is possible to immersively visualize urban production planning processes in large-scale scenarios. This expands the functional planning space of Urban Production and overcomes previous technical limitations.}, language = {en} } @inproceedings{FischerHofmannWaschiketal., author = {Fischer, Sophie and Hofmann, Jan and Waschik, Monika and Br{\"a}utigam, Volker}, title = {Agile Lehre f{\"u}r eine interaktive Gr{\"u}ndungskultur}, series = {Kompetenzen f{\"u}r die digitale Transformation 2020: Digitalisierung der Arbeit-Kompetenzen-Nachhaltigkeit 1. Digitalkompetenz-Tagung}, booktitle = {Kompetenzen f{\"u}r die digitale Transformation 2020: Digitalisierung der Arbeit-Kompetenzen-Nachhaltigkeit 1. Digitalkompetenz-Tagung}, publisher = {Springer}, address = {Berlin, Heidelberg}, doi = {10.1007/978-3-662-62866-9_20}, pages = {289 -- 304}, abstract = {In der Region Mainfranken ist ein R{\"u}ckgang der Gr{\"u}ndungszahlen zu beobachten. Ein Ansatz, um dieser Entwicklung idealerweise entgegenzuwirken, sind die thematische Sensibilisierung und Erh{\"o}hung von Innovationspotenzialen bei Studierenden sowie der Ausbau von hochschul{\"u}bergreifenden Netzwerkstrukturen. Daf{\"u}r wurden in dem vom Bundesministerium f{\"u}r Bildung und Forschung (BMBF) gef{\"o}rderten Projekt „PIONIER" (F{\"o}rderkennzeichen 01PL17019) kompetenzbasierte Lehrmodule entwickelt, bei denen Studierende zielgerichtet bei ihrer Kompetenzentwicklung und Formung der Gr{\"u}nderpers{\"o}nlichkeit unterst{\"u}tzt werden. Das Kompetenzprofil von Lehmann \& Wilke (2019) wurde erg{\"a}nzt und diente als Grundlage f{\"u}r die neu entwickelten agilen Lehrformate. Aus dem Projekt resultieren das GR{\"U}NDUNGS:portfolio, das die erbrachten Leistungen und durchlaufenen Module zug{\"a}nglich macht, sowie der interaktive GR{\"U}NDUNGS:leitfaden als Unterst{\"u}tzungswerkzeug. Die Maßnahmen werden von Expertinnen und Experten aus hochschulinternen Abteilungen, St{\"a}dten und Kommunen sowie Start-ups und Unternehmenspartnerinnen und Unternehmenspartnern begleitet, um den Studierenden entsprechende Unterst{\"u}tzungsstrukturen mittels Beratung, Coaching und Erfahrungsaustausch zukommen zu lassen. Ziel dieses ganzheitlichen Ansatzes ist einerseits, das Thema Gr{\"u}ndertum bekannter, attraktiver und nahbarer zu machen, andererseits nachhaltige Angebote f{\"u}r Studierende zu schaffen, um der regional r{\"u}ckl{\"a}ufigen Gr{\"u}nderquote entgegenzuwirken. Gleichzeitig verfolgt das Vorhaben eine Erh{\"o}hung des Praxisbezugs von Forschung und Lehre sowie die Erh{\"o}hung der Innovationsf{\"a}higkeit von Studierenden. Somit werden die Studierenden zum Gr{\"u}nden animiert und auch f{\"u}r den schnelllebigen und anspruchsvollen Arbeitsmarkt qualifiziert.}, language = {en} } @article{BraeutigamKoernerSingeretal., author = {Br{\"a}utigam, Volker and K{\"o}rner, Carolin and Singer, Robert F and Kaltenbacher, Manfred and Meiler, Martin and Lerch, Reinhard}, title = {Smart structural components by integration of sensor/actuator modules in die castings}, series = {Industrial and Commercial Applications of Smart Structures Technologies 2007}, volume = {6527}, journal = {Industrial and Commercial Applications of Smart Structures Technologies 2007}, pages = {222 -- 233}, abstract = {The integration of piezoceramic based sensors and actuators offers a possibility to produce multifunctional materials with enhanced properties. Die casting is an innovative approach for the fabrication of metal matrix smart structural components where the functional module is totally integrated in the interior of the cast part. A technique to support and protect the sensitive sensor/actuator-modules in the die during the highly dynamic die filling process is presented. Demonstration parts were produced which are fully capable to be activated to vibrate. An approach to characterize in detail the behavior of the sensor/actuator-module after the integration in the cast matrix is presented. Both FE computation and electric impedance measurements are used to quantify how the casting process affects the performance of the integrated sensor/actuator-modules.}, language = {en} } @article{EyererElsnerHirthetal., author = {Eyerer, Peter and Elsner, Peter and Hirth, Thomas and Eyerer, Peter and Klein, Sabine and Kaiser, Mathias and Br{\"a}utigam, Volker}, title = {Oberfl{\"a}chentechnologien f{\"u}r Kunststoffbauteile}, series = {Polymer Engineering: Technologien und Praxis}, journal = {Polymer Engineering: Technologien und Praxis}, pages = {436 -- 465}, abstract = {Ein wesentlicher Aspekt der modernen Produktion von Gebrauchsg{\"u}tern ist die Konzentration der gew{\"u}nschten Eigenschaften weg vom Volumen hin zur Oberfl{\"a}che. W{\"a}hrend das Volumen statische Eigenschaften und die Formgebung vorgibt, bestimmt die Oberfl{\"a}che Haptik, Farbe, Glanz, Abnutzungsverhalten, Barrierewirkung, elektrische Leitf{\"a}higkeit, Benetzung und viele andere Eigenschaften, die den Charakter der Gebrauchsg{\"u}ter nach außen pr{\"a}gen. In einigen F{\"a}llen werden die Eigenschaften durch immer d{\"u}nnere Schichtsysteme mit hoher Funktionalit{\"a}t erreicht. Typische Beispiele dieser Entwicklung sind lackierte Kunststoffteile im Fahrzeugbau, kratzfeste reflexionsarme und pflegeleichte Kunststoffoptiken, hartstoffverg{\"u}tete Werkzeuge und Bauteile oder Barriereschichten in der Lebensmittelverpackung.}, language = {de} } @article{Braeutigam, author = {Br{\"a}utigam, Volker}, title = {Autonome Schwarmsteuerung in der Beschichtung Logistik 4.0: Wie mittelst{\"a}ndische Zulieferer der Automobilindustrie ihre Fl{\"a}cheneffizienz um bis zu 30\% steigern}, series = {LogReal online Journal}, journal = {LogReal online Journal}, language = {de} } @article{HarschBraeutigamSchueller, author = {Harsch, Matthias and Br{\"a}utigam, Volker and Sch{\"u}ller, Peter}, title = {Mikrowellentrocknung von Wasserlacken: Hat die Methode ein Anwendungspotenzial?}, series = {Metalloberfl{\"a}che}, volume = {56}, journal = {Metalloberfl{\"a}che}, number = {3}, pages = {42 -- 47}, language = {en} } @incollection{BraeutigamSawatzki, author = {Br{\"a}utigam, Volker and Sawatzki, Christina}, title = {Schritte einer Kanbaneinf{\"u}hrung: Ist Kanban ein Allheilmittel? BVL Schriftenreihe Wirtschaft \& Logistik}, series = {Fallstudien in der Logistik}, booktitle = {Fallstudien in der Logistik}, language = {en} } @book{Braeutigam, author = {Br{\"a}utigam, Volker}, title = {Mikrowellentrocknung und -vernetzung von Wasserlacken: Verfahren, Qualit{\"a}t, Kosten und Umweltrelevanz}, isbn = {978-3-8322-0676-5}, pages = {154}, language = {en} } @incollection{WaschikBraeutigam, author = {Waschik, Monika and Br{\"a}utigam, Volker}, title = {Storytelling mit den H{\"a}nden: Unternehmerisches Denken und Handeln mit LEGO® Serious Play® greifbar machen}, series = {Kompetenzen f{\"u}r die digitale Transformation 2020: Digitalisierung der Arbeit-Kompetenzen-Nachhaltigkeit 1. Digitalkompetenz-Tagung}, booktitle = {Kompetenzen f{\"u}r die digitale Transformation 2020: Digitalisierung der Arbeit-Kompetenzen-Nachhaltigkeit 1. Digitalkompetenz-Tagung}, doi = {10.1007/978-3-662-62866-9_27}, pages = {397 -- 411}, abstract = {Unternehmen sind im digitalen Wandel rapiden Ver{\"a}nderungen ausgesetzt. Teams ben{\"o}tigen in dieser Komplexit{\"a}t vielf{\"a}ltige Kompetenzen, die sie durch „Hands-on"- Erfahrungen der LEGO® Serious Play®-Methode (LSP®) zum gegenseitigen Nutzen einsetzen k{\"o}nnen. F{\"u}r das Team des Moduls PIONIER (BMBF-F{\"o}rderkennzeichen 01PL17019) war die variable und niederschwellige Anwendbarkeit von LSP Anlass, w{\"a}hrend verschiedenster Veranstaltungen und Lehrformate eine zielorientierte Verkettung einzelner Methoden vorzunehmen. So konnten mit der Adaption von LEGO® Serious Play®, Storytelling und Pretotyping, angepasst an die jeweilige Zielgruppe und Zweck der Formate, erlebbare Maßnahmen durchgef{\"u}hrt werden, die von allen Teilnehmenden als sehr positiv bewertet wurden. Da w{\"a}hrend des verbalen und nonverbalen Kommunikationsprozesses nicht nur die auditive und visuelle , sondern auch die kin{\"a}sthetische Wahrnehmung der Teilnehmenden stimuliert wurden, erzeugte dies eine nachhaltige Wirkung auf das Teambuilding, die {\"u}ber den Rahmen der Veranstaltungen hinaus sichtbar wurde.}, language = {de} } @article{KoernerHirschmannBraeutigametal., author = {K{\"o}rner, C and Hirschmann, M and Br{\"a}utigam, Volker and Singer, R. F.}, title = {Endogenous particle stabilization during magnesium integral foam production}, series = {Advanced Engineering Materials}, volume = {6}, journal = {Advanced Engineering Materials}, number = {6}, doi = {10.1002/adem.200405147}, pages = {385 -- 390}, abstract = {The production of magnesium integral foam components with a dense shell and a porous core is investigated. High pressure casting methods are used where liquid magnesium mixed with a blowing agent is injected into a permanent steel mould. A compact shell develops due to fast cooling at the walls. Larger cooling times in the core allow the decomposition of the blowing agent and the evolution of a foam structure. The resulting integral foams show a high weight-specific stiffness combined with high energy absorption capability. For the first time, foam stabilizing without additives is realized. Stabilization is by foaming during solidification with the primary α-phase particles acting as obstacles slowing down cell wall thinning.}, language = {en} } @article{WilhelmManghisiUvaetal., author = {Wilhelm, Markus and Manghisi, Vito Modesto and Uva, Antonello and Fiorentino, Michele and Br{\"a}utigam, Volker and Engelmann, Bastian and Schmitt, Jan}, title = {ErgoTakt: A novel approach of human-centered balancing of manual assembly lines}, series = {Procedia CIRP}, volume = {97}, journal = {Procedia CIRP}, doi = {https://doi.org/10.1016/j.procir.2020.05.250}, pages = {354 -- 360}, abstract = {Although the increasing use of automation in industry, manual assembly stations are still common and, in some situations, even inevitable. Current practice in manual assembly lines is to balance them using the takt-time of each workstation and harmonize it. However, this approach mostly does not include ergonomic aspects and thus it may lead to workforce musculoskeletal disorders, extended leaves, and demotivation. This paper presents a holistic human-centric optimization method for line balancing using a novel indicator ̶ the ErgoTakt. ErgoTakt improves the legacy takt-time and helps to find an optimum between the ergonomic evaluation of an assembly station and its balance in time. The authors used a custom version of the ErgoSentinel Software and a Microsoft Kinect depth camera to perform online and real-time ergonomic assessment. An optimization algorithm is developed to find the best-fitting solution by minimizing a function of the ergonomic RULA-value and the cycle time of each assembly workstation with respect to the worker's ability. The paper presents the concept, the system-setup and preliminary evaluation of an assembly scenario. The results demonstrate that the new approach is feasible and able to optimize an entire manual assembly process chain in terms of both, economic aspects of a well-balanced production line as well as the ergonomic issue of long term human healthy work.}, language = {en} } @inproceedings{RosiliusWirsingvonEitzenetal., author = {Rosilius, Maximilian and Wirsing, Benedikt and von Eitzen, Ingo and Wilhelm, Markus and Schmitt, Jan and Engelmann, Bastian and Br{\"a}utigam, Volker}, title = {Evaluation of Visual Requirements and Software-Design for Immersive Visibility in Industrial Applications}, series = {2021 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct)}, booktitle = {2021 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct)}, pages = {234 -- 239}, abstract = {Currently, many sources predict increasing use of AR technology in the industrial environment. The task of immersive productive assistance systems is to provide information contextually to the industrial user. Therefore, it is essential to explore the factors and effects that influence the visibility and the corresponding quality of this information. Caused by the technical limitations of additive display technology and application conditions, this new approach has evaluated the immersive visibility of Landolt Rings in various greyscales against ambient illuminance levels on different industrial-like surfaces, coupled with and without a white virtual background. For this purpose, an empirical study in a within-subjects-design with full factorial experimental design (n=23) was conducted on Microsoft HoloLens 2 hardware. The mean values of the main effects indicate that visibility is significantly affected by ambient illuminance (best results at lower level), greyscale (best results at middle level) and virtual background (best results with background). In contrast, the choice of surface is shown to have no statistically significant effect on visibility, however it affects the response time. Additionally, cross-interactions of variables were analyzed and lead to a design recommendation for immersive industrial applications.}, language = {en} } @article{FischerRosiliusSchmittetal., author = {Fischer, Sophie and Rosilius, Maximilian and Schmitt, Jan and Br{\"a}utigam, Volker}, title = {A brief review of our agile teaching formats in entrepreneurship education}, series = {Sustainability}, volume = {14}, journal = {Sustainability}, number = {1}, doi = {https://doi.org/10.3390/su14010251}, pages = {251 -- 251}, abstract = {Companies are confronted with increasingly demanding environments, including globalization, technologization, intergenerationality, and crises such as the coronavirus pandemic. To accept uncertainties as a challenge and to recognize opportunities for development, well-educated and resilient founders are needed who can foster innovation and sustainable development within society and the economy. The majority of today's entrepreneurs have an academic background. Hence, institutions for higher education need to provide comprehensive educational offerings and support initiatives to train and sensitize future entrepreneurs. Therefore, since 2013, agile teaching formats have been developed in our project at a Bavarian university of applied sciences. In two stages, we founded a limited company for hands-on experimentation with entrepreneurship and also conceptualized an elective course and an annual founders' night. Based on a theoretical model and continuous teaching evaluations, we adjusted the individual modules to suit the target group. The objective is to promote the acquisition of key competencies and exert a positive influence on the startup quotient in the region. There are six startups by students who can be traced back to our project. This indicates that a target-group-oriented educational program encourages motivation and awareness of entrepreneurial thinking and action among students.}, language = {en} } @article{EngelmannSchmittMilleretal., author = {Engelmann, Bastian and Schmitt, Simon and Miller, Eddi and Br{\"a}utigam, Volker and Schmitt, Jan}, title = {Advances in machine learning detecting changeover processes in cyber physical production systems}, series = {Journal of Manufacturing and Materials Processing}, volume = {4}, journal = {Journal of Manufacturing and Materials Processing}, number = {4}, pages = {108 -- 108}, abstract = {The performance indicator, Overall Equipment Effectiveness (OEE), is one of the most important ones for production control, as it merges information of equipment usage, process yield, and product quality. The determination of the OEE is oftentimes not transparent in companies, due to the heterogeneous data sources and manual interference. Furthermore, there is a difference in present guidelines to calculate the OEE. Due to a big amount of sensor data in Cyber Physical Production Systems, Machine Learning methods can be used in order to detect several elements of the OEE by a trained model. Changeover time is one crucial aspect influencing the OEE, as it adds no value to the product. Furthermore, changeover processes are fulfilled manually and vary from worker to worker. They always have their own procedure to conduct a changeover of a machine for a new product or production lot. Hence, the changeover time as well as the process itself vary. Thus, a new Machine Learning based concept for identification and characterization of machine set-up actions is presented. Here, the issue to be dealt with is the necessity of human and machine interaction to fulfill the entire machine set-up process. Because of this, the paper shows the use case in a real production scenario of a small to medium size company (SME), the derived data set, promising Machine Learning algorithms, as well as the results of the implemented Machine Learning model to classify machine set-up actions.}, language = {en} } @article{WilhelmRosiliusBraeutigam, author = {Wilhelm, Markus and Rosilius, Maximilian and Br{\"a}utigam, Volker}, title = {PlanAR - Planen mit Augmented Reality (AR)}, series = {FHWS Science Journal}, volume = {5}, journal = {FHWS Science Journal}, number = {2}, issn = {2196-6095}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:863-opus-20006}, pages = {125 -- 130}, abstract = {Die Weiterentwicklung von Endger{\"a}ten wie z.B. von NReal oder die Microsoft HoloLens 2 im Bereich Augmented Reality (AR) f{\"u}hrt zu einem erweiterten Nutzungsfeld von AR außerhalb klassischer Entwicklungs- und »Gaming«-Umgebungen. Eine der sich intensivierenden Nutzungsoptionen ist der wertorientierte Einsatz im industriellen Umfeld. In diesem Bereich bedarf es noch einer weitreichenden Identifizierung und Evaluierung der Einsatzpotenziale und des -nutzens [1]. Naheliegender Vorteil der Technologie ist die Anwendung in integrativen Planungsprozessen z.B. in der Anlagenplanung. Durch die Visualisierung von virtuellen Inhalten in einer realen Umgebung, k{\"o}nnen zuk{\"u}nftige Ver{\"a}nderungen auf m{\"o}gliche St{\"o}rfaktoren bereits vor Umsetzung detailliert gepr{\"u}ft und optimiert werden. Dies f{\"u}hrt zu Zeit- und Kostenersparnis in Planungsphasen, da nachtr{\"a}gliche {\"A}nderungen signifikant kostenintensiver und komplexer sind. Eine weitere Nutzungsm{\"o}glichkeit ist die Simulation von Fertigungsprozessen und deren Auswirkungen. Die Simulation kann insbesondere bei der Identifikation unternehmensunabh{\"a}ngiger Probleme helfen. Auch kann der zeitliche Faktor, der jedem Prozess zugrunde liegt, eingebettet in einem virtuell erweiterten Realszenario gepr{\"u}ft werden. Als Beispiel kann hier die St{\"o}rungsbeseitigung in industriellen Fertigungsprozessen dienen, welche meistens einer notwendigen engen Taktung unterliegen. St{\"o}rungen sind h{\"a}ufig durch die direkte Umwelt oder Probleme in Arbeitsabl{\"a}ufen begr{\"u}ndet. An diesem Punkt k{\"o}nnen die m{\"o}glichen Optimierungsoptionen unter den gegebenen Bedingungen eine erste Validierung erfahren, ohne direkten Eingriff in laufende Prozesse. Diese Anwendungsm{\"o}glichkeiten gilt es zu untersuchen und in eine gebrauchstaugliche L{\"o}sung f{\"u}r den Einsatz im wertsch{\"o}pfenden Bereichen zu {\"u}berf{\"u}hren. Ziel dabei ist es die noch hypothetischen Potenziale zu bewerten und in einsetzbare Applikationen zu transformieren, die den Anforderungen in einer industriellen Umgebung standhalten. Um eine nutzerorientierte Forschung zu gew{\"a}hrleisten, ist es notwendig den Bedarf der Industrie zu erfassen. An diesem Punkt setzt das Vorhaben PlanAR an und untersucht die interdisziplin{\"a}ren Auswirkungen der Anwendungsm{\"o}glichkeiten und Applikationen bei industrienahen Nutzungsanforderungen.}, language = {de} } @article{MaximilianSpiertzWirsingetal., author = {Maximilian, Rosilius and Spiertz, Martin and Wirsing, Benedikt and Geuen, Manuel and Br{\"a}utigam, Volker and Ludwig, Bernd}, title = {Impact of Industrial Noise on Speech Interaction Performance and User Acceptance when Using the MS HoloLens 2}, series = {Multimodal Technologies and Interaction}, volume = {8}, journal = {Multimodal Technologies and Interaction}, doi = {10.3390/mti8020008}, language = {en} }