@incollection{HartmannManaraZipfetal., author = {Hartmann, J{\"u}rgen and Manara, Jochen and Zipf, Matthias and Stark, Thomas and Knopp, Kevin and Z{\"a}nglein, Marc and Schreiber, Ekkehard and Schmidt, Franz and Brunner, Martin and M{\"u}ller, Michael}, title = {Experimental set-up for dynamic material investigation at high temperatures}, series = {Sensors and Measuring Systems; 19th ITG/GMA-Symposium}, booktitle = {Sensors and Measuring Systems; 19th ITG/GMA-Symposium}, publisher = {VDE Verlag}, isbn = {978-3-8007-4683-5}, publisher = {Hochschule f{\"u}r Angewandte Wissenschaften W{\"u}rzburg-Schweinfurt}, pages = {516 -- 519}, abstract = {Energy efficiency and operation safety in energy conversion, process technology, and aerospace engineering requires advanced material investigation, in particular at high temperatures to characterize the materials and components. Additionally, modern additive manufacturing methods, in particular the 3D metal laser printer requires a detailed control of the melting temperature. Many applications are based on a layered structures, e.g. thermal barrier coatings in gas turbines. Also components manufactured by additive manufacturing pose a layered structure. In these structures the mechanical contact between the layers and to the substrate is of high interest. Besides, the complete characterisation of the additive manufactured component is important for its later application. To cope with these new demands, the University of Applied Sciences Wuerzburg - Schweinfurt (FHWS) and the Bavarian Center for Applied …}, language = {en} } @article{HartmannZipfManaraetal., author = {Hartmann, J{\"u}rgen and Zipf, Matthias and Manara, Jochen and Stark, Thomas and Arduini, Mariacarla and Ebert, Hans-Peter}, title = {Infrared-optical characterization of emitting and absorbing gases at high temperatures and high pressures}, series = {High Temperatures - High Pressures}, volume = {47}, journal = {High Temperatures - High Pressures}, number = {1}, pages = {3 -- 21}, abstract = {In the context of the optimization of stationary gas turbines, the surface temperatures of the turbine blades have to be measured by a non-contact technique using radiation thermometers during operation of the turbine. Nowadays turbine blades are protected by thermal barrier coatings. The infrared-optical properties of these coatings require the usage of the MIR or LWIR region for non-contact measurement of the surface temperatures. For performing such measurements and for properly analyzing the derived data, the transmission and absorption spectra of the combustion gas mixture within the turbine were determined at the local conditions during operation of the turbine. Therefore, subject of this work is the measurement of the transmission spectra of carbon dioxide and water vapor at high temperatures and high pressures to identify a wavelength range, which is almost free of absorption and emission effects. In …}, language = {en} } @misc{HartmannKnoppZaengleinetal., author = {Hartmann, J{\"u}rgen and Knopp, Kevin and Z{\"a}nglein, Marc and Manara, Jochen and Stark, Thomas and Zipf, Matthias and Schreiber, Ekkehard and Kr{\"u}ger, U. and Brunner, Martin and M{\"u}ller, Michael}, title = {Messsystem f{\"u}r dynamische Materialuntersuchung bei hohen Temperaturen}, address = {N{\"u}rnberg}, language = {de} } @inproceedings{HartmannKnoppLenskietal., author = {Hartmann, J{\"u}rgen and Knopp, Kevin and Lenski, Philipp and Z{\"a}nglein, Marc and Manara, Jochen and Stark, Thomas and Zipf, Matthias and Arduini, Mariacarla and Schreiber, Ekkehard and Kr{\"u}ger, U. and Schmidt, Franz and Brunner, Martin}, title = {Sensor systems for additive manufacturing}, publisher = {Key Note Lecture MSE 2018}, address = {Darmstadt}, language = {en} } @inproceedings{HartmannManaraZipfetal., author = {Hartmann, J{\"u}rgen and Manara, Jochen and Zipf, Mathias and Stark, Thomas and Knopp, Kevin and Z{\"a}nglein, Marc and Lenski, Philipp and Schreiber, Ekkehard and Schmidt, Franz and Brunner, Martin and M{\"u}ller, Michael}, title = {Thermophysical property measurements at high-temperatures for power engineering and additive manufacturing processes}, address = {Berlin}, isbn = {978-3-940283-94-8}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:863-opus-17678}, pages = {6}, abstract = {To address the needs for increasing efficiency in power conversion, stratified structures like thermal barrier coatings, are used to increase operation temperature. Also advanced material processing like 3D laser printing of metals and ceramics are based on a layer-to-layer process at high temperatures, resulting in non-homogeneous components. Both systems require more and more detailed investigation methods to characterise the material properties of the resulting structures and to optimize the relevant processes. To address the required needs in advanced material characterisation recently an attempt was started to develop a unique measurement set-up for advanced material characterisation. This method is based on the well know laser flash principle, which was improved by adding supplementary heating sources and additional detection channels. Combining different heating mechanism and heating times with the two-dimensional measuring of the thermal flow across the sample enables the determination of different opto-thermal parameters and other material properties, e.g. mechanical contact, electrical conductivity or optical data, which also depend on or affect the flow of heat. In this paper we describe the implementation of the different optical methods to measure the thermal heat flow by point-like and two-dimensional temperature measurement and present first results on several samples.}, language = {en} }