@inproceedings{HartmannManaraStarketal., author = {Hartmann, J{\"u}rgen and Manara, Jochen and Stark, Thomas and Zipf, Matthias and Arduini, Mariacarla and Ebert, Hans-Peter}, title = {High temperature test-rig for emissvity and non-contact temperature measurements}, address = {Graz ({\"O}sterreich)}, language = {en} } @inproceedings{HartmannManaraZipfetal., author = {Hartmann, J{\"u}rgen and Manara, Jochen and Zipf, Matthias and Stark, Thomas and Arduini, Mariacarla and Ebert, Hans-Peter and Tutschke, Andreas and Hallam, Andrew and Hanspal, Jagdevinder and Langley, Mark and Hodge, D.}, title = {Development of Long Wavelength Infrared Radiation Thermometry for Measurements in Gas Turbines}, address = {Darmstadt}, language = {en} } @inproceedings{HartmannKnoppLenskietal., author = {Hartmann, J{\"u}rgen and Knopp, Kevin and Lenski, Philipp and Z{\"a}nglein, Marc and Manara, Jochen and Stark, Thomas and Zipf, Matthias and Arduini, Mariacarla and Schreiber, Ekkehard and Kr{\"u}ger, U. and Schmidt, Franz and Brunner, Martin}, title = {Sensor systems for additive manufacturing}, publisher = {Key Note Lecture MSE 2018}, address = {Darmstadt}, language = {en} } @inproceedings{HartmannManaraZipfetal., author = {Hartmann, J{\"u}rgen and Manara, Jochen and Zipf, Mathias and Stark, Thomas and Knopp, Kevin and Z{\"a}nglein, Marc and Lenski, Philipp and Schreiber, Ekkehard and Schmidt, Franz and Brunner, Martin and M{\"u}ller, Michael}, title = {Thermophysical property measurements at high-temperatures for power engineering and additive manufacturing processes}, address = {Berlin}, isbn = {978-3-940283-94-8}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:863-opus-17678}, pages = {6}, abstract = {To address the needs for increasing efficiency in power conversion, stratified structures like thermal barrier coatings, are used to increase operation temperature. Also advanced material processing like 3D laser printing of metals and ceramics are based on a layer-to-layer process at high temperatures, resulting in non-homogeneous components. Both systems require more and more detailed investigation methods to characterise the material properties of the resulting structures and to optimize the relevant processes. To address the required needs in advanced material characterisation recently an attempt was started to develop a unique measurement set-up for advanced material characterisation. This method is based on the well know laser flash principle, which was improved by adding supplementary heating sources and additional detection channels. Combining different heating mechanism and heating times with the two-dimensional measuring of the thermal flow across the sample enables the determination of different opto-thermal parameters and other material properties, e.g. mechanical contact, electrical conductivity or optical data, which also depend on or affect the flow of heat. In this paper we describe the implementation of the different optical methods to measure the thermal heat flow by point-like and two-dimensional temperature measurement and present first results on several samples.}, language = {en} } @article{JuergenArduiniManaraetal., author = {J{\"u}rgen, Hartmann and Arduini, Mariacarla and Manara, Jochen and Stark, Thomas and Ebert, Hans-Peter}, title = {Development and Evaluation of an Improved Apparatus for Measuring the Emissivity at High Temperatures}, series = {Sensors}, volume = {21}, journal = {Sensors}, number = {18}, issn = {1424-8220}, doi = {10.3390/s21186252}, abstract = {An improved apparatus for measuring the spectral directional emissivity in the wavelength range between 1 µm and 20 µm at temperatures up to 2400 K is presented in this paper. As a heating unit an inductor is used to warm up the specimen, as well as the blackbody reference to the specified temperatures. The heating unit is placed in a double-walled vacuum vessel. A defined temperature, as well as a homogenous temperature distribution of the whole surrounding is ensured by a heat transfer fluid flowing through the gap of the double-walled vessel. Additionally, the surrounding is coated with a high-emitting paint and serves as blackbody-like surrounding to ensure defined boundary conditions. For measuring the spectral directional emissivity at different emission angles, a movable mirror is installed in front of the specimen, which can be adjusted by a rotatable arrangement guiding the emitted radiation into the attached FTIR-spectrometer. The setup of the emissivity measurement apparatus (EMMA) and the measurement procedure are introduced, and the derived measurement results are presented. For evaluating the apparatus, measurements were performed on different materials. The determined emissivities agree well with values published in literature within the derived relative uncertainties below 4\% for most wavelengths.}, language = {en} }