@incollection{CerdasGerbersAndrewetal., author = {Cerdas, Felipe and Gerbers, Roman and Andrew, Stefan and Schmitt, Jan and Dietrich, Franz and Thiede, Sebastian and Dr{\"o}der, Klaus and Herrmann, Christoph}, title = {Disassembly planning and assessment of automation potentials for lithium-ion batteries}, series = {Recycling of Lithium-Ion Batteries: The LithoRec Way}, booktitle = {Recycling of Lithium-Ion Batteries: The LithoRec Way}, pages = {83 -- 97}, language = {en} } @phdthesis{Schmitt, author = {Schmitt, Jan}, title = {Untersuchungen zum Herstellungsprozess des Elektrode-Separator-Verbunds f{\"u}r Lithium-Ionen Batteriezellen}, language = {en} } @article{KieflFischerSchmitt, author = {Kiefl, Sophia and Fischer, Sophie and Schmitt, Jan}, title = {Self-employed and stressed out? The impact of stress and stress management on entrepreneurs' mental health and performance}, series = {Frontiers in Psychology}, volume = {15}, journal = {Frontiers in Psychology}, publisher = {Frontiers Media SA}, issn = {1664-1078}, doi = {https://doi.org/10.3389/fpsyg.2024.1365489}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:863-opus-55955}, abstract = {Introduction: Entrepreneurs play a central role in economic and social stability, yet the start-up rate in Germany has declined in recent years, possibly due to the stress associated with entrepreneurial endeavors. Stressors such as financial uncertainty and time pressure are prevalent among entrepreneurs and negatively affect their psychological well-being. However, research on stress management strategies among self-employed individuals remains limited. Methods: This pilot study conducted a quantitative analysis with 117 self-employed participants in Germany. The study focused on typical entrepreneurial work demands and selected stress coping mechanisms. Results: The analysis revealed a significant correlation between quantitative demands and mental exhaustion. Furthermore, a high positive correlation between presenteeism and workload suggests that presenteeism may partially explain the variance in workload. These findings underscore how high job demands can lead to self-endangering behaviors that are detrimental to mental health. Discussion: Although no significant moderating effect of proactive coping on the relationship between job demands and mental exhaustion was observed, significant negative correlations between proactive coping and both job demands and mental exhaustion suggest a potential protective role of proactive coping against work-related stress. This study highlights the importance of understanding stress coping strategies among self-employed individuals and their impact on entrepreneurial success and mental well-being. Further research in this area is warranted to develop effective interventions to support the well-being and productivity of self-employed individuals in Germany.}, language = {en} } @article{KieflFischerSchmitt, author = {Kiefl, Sophia and Fischer, Sophie and Schmitt, Jan}, title = {Self-employed and stressed out? The impact of stress and stress management on entrepreneurs' mental health and performance}, series = {Frontiers in Psychology}, volume = {15}, journal = {Frontiers in Psychology}, publisher = {Frontiers}, doi = {10.3389/fpsyg.2024.1365489}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:863-opus-56040}, pages = {15}, language = {en} } @article{OchsWehnertHartmannetal., author = {Ochs, Dennis and Wehnert, Kira-Kristin and Hartmann, J{\"u}rgen and Schiffler, Andreas and Schmitt, Jan}, title = {Sustainable Aspects of a Metal Printing Process Chain with Laser Powder Bed Fusion (LPBF)}, series = {Procedia CIRP}, volume = {98}, journal = {Procedia CIRP}, publisher = {Elsevir}, pages = {613 -- 618}, abstract = {Production companies are getting more and more aware of the relevancy of energy costs and the environmental impact of their manufactured products. Hence, the knowledge about the energy intensity of new process technologies as metal printing becomes increasingly crucial. Therefore, data about the energy intensity of entire process chains allow a detailed assessment of the life cycle costs and environmental impact of metal printed parts. As metal printing with Laser Powder Bed Fusion (LPBF) is applied from rapid prototyping to serial manufacturing processes more and more, sustainability data are useful to support a valid scale-up scenario and energetic improvements of the 3D-printing machinery as well as peripheral aggregates used in the process chain. The contribution aims to increase the transparency of the LPBF process chain in terms of its energy consumption. Therefore a generalized model to assess sustainability aspects of metal printed parts is derived. For this purpose, the LPBF process chain with the essential pre-, main- and post-processes is evaluated regarding its energy intensity. Here, the sub-processes, for example wet and dry cleaning of the printer, sieving of the metal powder or sand-blasting of the part are analyzed as well as the main printing process. Based on the derived experimental data from an installed, industry-like process chain, a model is created, which tends to generalize the experimental findings to evaluate other metal printed parts and process chain variants in terms of their energy intensity.}, language = {en} } @inproceedings{ChenBremerSchmittetal., author = {Chen, Mei-Hui and Bremer, Peik and Schmitt, Jan and Tsai, Kune-muh}, title = {Reentrant Flow Shop Production Control with the Theory of Constraints for Wafer Fabrication Having Parallel Machines}, series = {Proceedings of the 28th International Symposium on Logistics (ISL 2024) Building Sustainable Connectivity through Logistics and Supply Chains}, booktitle = {Proceedings of the 28th International Symposium on Logistics (ISL 2024) Building Sustainable Connectivity through Logistics and Supply Chains}, isbn = {978-0-85358-354-7}, pages = {131-132}, abstract = {Purpose of this paper: In a production line with capacity constraint resources (CCR) or bottleneck stations, the production control and the throughput rate are determined by the CCR station. In this study, we consider a production system with parallel machines and there are many rounds of reentrants during the production processes, and can be regarded as a reentrant flow shop process (RFS). In most RFS systems, the release of jobs is a push type without considering the WIP in each layer of reentrance. To resolve the excessive WIP in an RFS system, we consider the theory of constraints (TOC) and implement the DBR (drum, bottleneck and rope) to model RFS scheduling and to define appropriate buffer sizes at the CCR stations of diverse reentrant layers. Design/methodology/approach STS: We obtain production data of a type of semiconductor chip where the photolithography process is the most frequent reentrant. We designed nine scenarios based on the current RFS of the case company by applying the TOC and considering the time differences in parallel machines. A simulation model for the photolithography process was established using AutoMod simulation. Thirty simulation runs were performed for the mean and standard deviation. The goal is to identify the best scenario among the nine proposed ones. Findings: The simulation results demonstrated that Scenario 9, which involves dynamic buffers and assigning higher priority to products with more processing reentrance layers, achieved the highest throughput of finished products. The throughput of finished products in Scenario 9 is 22\% higher than in the base scenario. It also shows improvements in maximum product stack-up and input-output ratio compared to the base scenario. Value: The paper studies dispatching rules for reentrant flow lines having parallel machines with data from the semiconductor industry, and this type of production system is common for producing a wide range of electronic devices. With limited buffer sizes on the shop floor, the number of WIPs is significant, especially for reentrant flow shops, to avoid being clogged with too many WIPs. Implementing DBR modeling from TOC, the nine scenarios demonstrate the effects of controlling buffer sizes on system performances. Research limitations/implications: The nine scenarios are designed based on the case company situations and may not be readily implemented in other industries. Moreover, the DBR modeling of the buffer sizes and CCR station schedule control should also be adjusted when employed in other applications.}, language = {en} } @inproceedings{RosiliusWirsingvonEitzenetal., author = {Rosilius, Maximilian and Wirsing, Benedikt and von Eitzen, Ingo and Wilhelm, Markus and Schmitt, Jan and Engelmann, Bastian and Br{\"a}utigam, Volker}, title = {Evaluation of Visual Requirements and Software-Design for Immersive Visibility in Industrial Applications}, series = {2021 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct)}, booktitle = {2021 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct)}, pages = {234 -- 239}, abstract = {Currently, many sources predict increasing use of AR technology in the industrial environment. The task of immersive productive assistance systems is to provide information contextually to the industrial user. Therefore, it is essential to explore the factors and effects that influence the visibility and the corresponding quality of this information. Caused by the technical limitations of additive display technology and application conditions, this new approach has evaluated the immersive visibility of Landolt Rings in various greyscales against ambient illuminance levels on different industrial-like surfaces, coupled with and without a white virtual background. For this purpose, an empirical study in a within-subjects-design with full factorial experimental design (n=23) was conducted on Microsoft HoloLens 2 hardware. The mean values of the main effects indicate that visibility is significantly affected by ambient illuminance (best results at lower level), greyscale (best results at middle level) and virtual background (best results with background). In contrast, the choice of surface is shown to have no statistically significant effect on visibility, however it affects the response time. Additionally, cross-interactions of variables were analyzed and lead to a design recommendation for immersive industrial applications.}, language = {en} } @article{FischerRosiliusSchmittetal., author = {Fischer, Sophie and Rosilius, Maximilian and Schmitt, Jan and Br{\"a}utigam, Volker}, title = {A brief review of our agile teaching formats in entrepreneurship education}, series = {Sustainability}, volume = {14}, journal = {Sustainability}, number = {1}, doi = {https://doi.org/10.3390/su14010251}, pages = {251 -- 251}, abstract = {Companies are confronted with increasingly demanding environments, including globalization, technologization, intergenerationality, and crises such as the coronavirus pandemic. To accept uncertainties as a challenge and to recognize opportunities for development, well-educated and resilient founders are needed who can foster innovation and sustainable development within society and the economy. The majority of today's entrepreneurs have an academic background. Hence, institutions for higher education need to provide comprehensive educational offerings and support initiatives to train and sensitize future entrepreneurs. Therefore, since 2013, agile teaching formats have been developed in our project at a Bavarian university of applied sciences. In two stages, we founded a limited company for hands-on experimentation with entrepreneurship and also conceptualized an elective course and an annual founders' night. Based on a theoretical model and continuous teaching evaluations, we adjusted the individual modules to suit the target group. The objective is to promote the acquisition of key competencies and exert a positive influence on the startup quotient in the region. There are six startups by students who can be traced back to our project. This indicates that a target-group-oriented educational program encourages motivation and awareness of entrepreneurial thinking and action among students.}, language = {en} } @inproceedings{MeyerPechtlBremeretal., author = {Meyer, Maximilian and Pechtl, Lin and Bremer, Peik and Schmitt, Jan}, title = {Towards position-based technologies for digitized process management on the shop floor}, series = {Proceedings of the 24th International Symposium on Logistics - Supply Chain Networks vs Platforms: Innovations, Challenges and Opportunities, W{\"u}rzburg}, booktitle = {Proceedings of the 24th International Symposium on Logistics - Supply Chain Networks vs Platforms: Innovations, Challenges and Opportunities, W{\"u}rzburg}, pages = {232 -- 241}, abstract = {Position-based technologies, e.g Ultrawideband (UWB), WiFi or Bluetooth, for indoor localisation purposes are already commercially available. With the highly increasing digitalization of industrial processes, the potential of these technologies comes into focus of process management research. This paper aims to structure position-based technologies according to their potential to support shop-floor process management. For this purpose, a framework with the following dimensions is developed: technical performance properties of the IPS, economical aspects, relevant use-case requirements, and appropriate data aggregation strategies. Following this, two representable use-cases show the implementation of an indoor-positioning-system and the data aggregation in order to derive relevant process data from position data.}, language = {en} } @article{FischerSchmitt, author = {Fischer, Sophie and Schmitt, Jan}, title = {Regionalstudie Auswirkungen des globalen Klimawandels in Mainfranken}, doi = {10.57714/fpkt-vt47}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:863-opus-19959}, pages = {176}, abstract = {Mainfr{\"a}nkische Unternehmen und Handwerksbetriebe stehen aufgrund expandierender Wertsch{\"o}pfungsketten in einem starken Abh{\"a}ngigkeitsverh{\"a}ltnis zu ihren global verteilten Zulieferern. Dadurch ist die Wertsch{\"o}pfungskette anf{\"a}llig f{\"u}r externe St{\"o}rungen, die unter anderem durch den Klimawandel ausgel{\"o}st werden. Zugleich sind die Erw{\"a}rmungsraten in der bayerischen Region derzeit deutlich h{\"o}her als im bundesweiten Durchschnitt. Die Entwicklung von strategischen Maßnahmen zur Klimaanpassung ist demnach unerl{\"a}sslich, um die unternehmensspezifischen Risiken des Klimawandels zu antizipieren und zu minimieren. Die Klimaanpassung ist in vielen kommunalen, wirtschaftlichen und gesellschaftlichen Bereichen eine der gr{\"o}ßten Herausforderungen der Gegenwart. Die vorliegende Regionalstudie beabsichtigt daher eine Abgrenzung der Verh{\"a}ltnisse und Wechselwirkungen des globalen Klimawandels, der Auswirkungen in der bayerischen Region Mainfranken sowie der aufkommenden Ver{\"a}nderungsbedarfe f{\"u}r gesellschaftliche, politische und wirtschaftliche Akteure. Ein umfassender grundlagentheoretischer {\"U}berblick dient zun{\"a}chst der Einordnung wichtiger Ansatzpunkte aus politischer Perspektive und stellt Angebote f{\"u}r Wirtschaftsakteure dar. Ferner werden die wirtschaftlichen Auspr{\"a}gungen nach Handwerksbetrieben und Unternehmen differenziert, sowie deren Rolle f{\"u}r Wachstum und Innovation in der Region, als auch in Bezug auf den Klimawandel und die erforderliche Anpassung aufgezeigt. Die Ergebnisse einer quantitativen Erhebung veranschaulichen, dass neben der Wirtschaftlichkeit und physischen Ressourcen, menschliche Faktoren zur Erh{\"o}hung der organisationalen Klimaresilienz beitragen. Um als wirtschaftliche Organisationen einen ad{\"a}quaten Umgang mit dem Klimawandel zu finden, sind bspw. zun{\"a}chst F{\"u}hrungskr{\"a}fte aufgefordert einen systemischen Ansatz mit umfangreichen Maßnahmen zu Klimaschutz und Klimaanpassung zu entwickeln, auf ihre Wirksamkeit zu erproben und ganzheitlich zu integrieren. Mit der vorliegenden Regionalstudie wird deutlich, dass neben dem Klimaschutz, der Reduzierung klimasch{\"a}dlicher Treibhausgasemissionen, die Klimaanpassung ein unverzichtbarer Aspekt ist, um die wirtschaftliche Effizienz zu erhalten und sogar zu erh{\"o}hen, indem die ver{\"a}nderten Anforderungen als Entwicklungschancen wahrgenommen werden.}, language = {de} } @misc{Schmitt, author = {Schmitt, Jan}, title = {MainWarmUp}, doi = {10.57714/hc8b-y119}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:863-opus-20756}, abstract = {Das Spiel MainWarmUp bietet einen schnellen und guten Einstieg in die Thematik „Klimawissen f{\"u}r produzierende Unternehmen". Mit zehn verschiedenen Aufgaben werden den Spielenden zahlreiche Maßnahmen rund um den Klimawandel vorgestellt, die Unternehmen zum Klimaschutz oder zur -anpassung anwenden k{\"o}nnten. Finden Sie sinnvolle Kombinationen, ordnen Sie die Karten verschiedenen Kategorien zu oder bereiten einen Klimapitch vor.}, language = {de} } @inproceedings{HartmannDzemkoEngelmannetal., author = {Hartmann, J{\"u}rgen and Dzemko, Mikita and Engelmann, Bastian and Schmitt, Jan}, title = {Toward Shifted Production Strategies Through Additive Manufacturing: A Technology and Market Review for Changing Value Chains}, series = {7th CIRP Global Web Conference (86)}, volume = {86}, booktitle = {7th CIRP Global Web Conference (86)}, doi = {10.1016/j.procir.2020.01.029}, pages = {228 -- 233}, abstract = {In the last decade many different additive manufacturing (AM) technologies for metal, plastic or ceramic processing raise from research to commercialization. As a result, AM grows into different business areas and transforms structures and processes. Hence, the contribution tends to show the change in added values though the availability of different additive manufacturing technologies based on a technology screening and market research. Regarding the named purpose, a broad market research of 83 companies and 339 printer models has been conducted to find patterns of AM technology market share and regions to structure indicators such as accuracy by processed material classes with a specified AM method. Printing materials as metal, plastic, ceramic and carbon have been considered. The categorization is done by the AM principles: power bed fusion, material extrusion, vat photopolymerization and …}, language = {en} } @article{SchmittEngelmannManghisietal., author = {Schmitt, Jan and Engelmann, Bastian and Manghisi, Vito Modesto and Wilhelm, Markus and Uva, Antonello and Fiorentino, Michele}, title = {Towards gestured-based technologies for human-centred smart factories}, series = {International Journal of Computer Integrated Manufacturing}, volume = {36}, journal = {International Journal of Computer Integrated Manufacturing}, number = {1}, issn = {1362-3052}, pages = {110 -- 127}, abstract = {Despite the increasing degree of automation in industry, manual or semi-automated are commonly and inevitable for complex assembly tasks. The transformation to smart processes in manufacturing leads to a higher deployment of data-driven approaches to support the worker. Upcoming technologies in this context are oftentimes based on the gesture-recognition, - monitoring or - control. This contribution systematically reviews gesture or motion capturing technologies and the utilization of gesture data in the ergonomic assessment, gesture-based robot control strategies as well as the identification of COVID-19 symptoms. Subsequently, two applications are presented in detail. First, a holistic human-centric optimization method for line-balancing using a novel indicator - ErgoTakt - derived by motion capturing. ErgoTakt improves the legacy takt-time and helps to find an optimum between the ergonomic evaluation of an assembly station and the takt-time balancing. An optimization algorithm is developed to find the best-fitting solution by minimizing a function of the ergonomic RULA-score and the cycle time of each assembly workstation with respect to the workers' ability. The second application is gesture-based robot-control. A cloud-based approach utilizing a generally accessible hand-tracking model embedded in a low-code IoT programming environment is shown.}, language = {en} } @article{SchmittSeitzScherdeletal., author = {Schmitt, Jan and Seitz, Philipp and Scherdel, Christian and Reichenauer, Gudrun}, title = {Machine Learning in the development of Si-based anodes using Small-Angle X-ray Scattering for structural property analysis}, series = {Computational Materials Science}, volume = {218}, journal = {Computational Materials Science}, issn = {1879-0801}, abstract = {Material development processes are highly iterative and driven by the experience and intuition of the researcher. This can lead to time consuming procedures. Data-driven approaches such as Machine Learning can support decision processes with trained and validated models to predict certain output parameter. In a multifaceted process chain of material synthesis of electrochemical materials and their characterization, Machine Learning has a huge potential to shorten development processes. Based on this, the contribution presents a novel approach to utilize data derived from Small-Angle X-ray Scattering (SAXS) of SiO_2 matrix materials for battery anodes with Neural Networks. Here, we use SAXS as an intermediate, high-throughput method to characterize sol-gel based porous materials. A multi-step-method is presented where a Feed Forward Net is connected to a pretrained autoencoder to reliably map parameters of the material synthesis to the SAXS curve of the resulting material. In addition, a direct comparison shows that the prediction error of Neural Networks can be greatly reduced by training each output variable with a separate independent Neural Network.}, language = {en} } @article{FischerKeuppPaethetal., author = {Fischer, Sophie and Keupp, Luzia and Paeth, Heiko and G{\"o}hlich, Michael and Schmitt, Jan}, title = {Climate adaptation as organizational learning: a grounded theory study on manufacturing companies in a Bavarian Region}, series = {Education Sciences}, volume = {12}, journal = {Education Sciences}, number = {1}, pages = {22 -- 22}, language = {en} } @article{FischerGoehlichSchmitt, author = {Fischer, Sophie and G{\"o}hlich, Michael and Schmitt, Jan}, title = {Interrelationships of climate adaptation and organizational learning: Development of a measurement model}, series = {Journal of Pedagogical Research}, volume = {6}, journal = {Journal of Pedagogical Research}, number = {5}, pages = {130 -- 152}, language = {en} } @incollection{Schmitt, author = {Schmitt, Jan}, title = {Ein integriertes Vorgehensmodell zur Implementierung eines nachhaltigen Wertstoffmanagements}, series = {CSR in S{\"u}ddeutschland: Unternehmerischer Erfolg und Nachhaltigkeit im Einklang}, booktitle = {CSR in S{\"u}ddeutschland: Unternehmerischer Erfolg und Nachhaltigkeit im Einklang}, pages = {93 -- 105}, language = {de} } @incollection{EngelmannSchmitt, author = {Engelmann, Bastian and Schmitt, Jan}, title = {Industrie 4.0 f{\"u}r Studierende des Wirtschaftsingenieurwesens}, series = {Kompetenzen f{\"u}r die digitale Transformation 2020: Digitalisierung der Arbeit-Kompetenzen-Nachhaltigkeit 1. Digitalkompetenz-Tagung}, booktitle = {Kompetenzen f{\"u}r die digitale Transformation 2020: Digitalisierung der Arbeit-Kompetenzen-Nachhaltigkeit 1. Digitalkompetenz-Tagung}, pages = {265 -- 273}, language = {de} } @article{SchirmerKranzRoseetal., author = {Schirmer, Fabian and Kranz, Philipp and Rose, Chad G. and Schmitt, Jan and Kaupp, Tobias}, title = {Towards Dynamic Human-Robot Collaboration: A Holistic Framework for Assembly Planning}, series = {Electronics}, volume = {14}, journal = {Electronics}, number = {1}, publisher = {MDPI}, issn = {2079-9292}, doi = {10.3390/electronics14010190}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:863-opus-57825}, abstract = {The combination of human cognitive skills and dexterity with the endurance and repeatability of robots is a promising approach to modern assembly. However, efficiently allocating tasks and planning an assembly sequence between humans and robots is a manual, complex, and time-consuming activity. This work presents a framework named "Extract-Enrich-Assess-Plan-Review" that facilitates holistic planning of human-robot assembly processes. The framework automatically Extracts data from heterogeneous sources, Assesses the suitability of each assembly step to be performed by the human or robot, and Plans multiple assembly sequence plans (ASP) according to boundary conditions. Those sequences allow for a dynamic adaptation at runtime and incorporate different human-robot interaction modalities that are Synchronized, Cooperative, or Collaborative. An expert remains in the loop to Enrich the extracted data, and Review the results of the Assess and Plan steps with options to modify the process. To experimentally validate this framework, we compare the achieved degree of automation using three different CAD formats. We also demonstrate and analyze multiple assembly sequence plans that are generated by our system according to process time and the interaction modalities used.}, language = {en} } @article{WilhelmManghisiUvaetal., author = {Wilhelm, Markus and Manghisi, Vito Modesto and Uva, Antonello and Fiorentino, Michele and Br{\"a}utigam, Volker and Engelmann, Bastian and Schmitt, Jan}, title = {ErgoTakt: A novel approach of human-centered balancing of manual assembly lines}, series = {Procedia CIRP}, volume = {97}, journal = {Procedia CIRP}, doi = {https://doi.org/10.1016/j.procir.2020.05.250}, pages = {354 -- 360}, abstract = {Although the increasing use of automation in industry, manual assembly stations are still common and, in some situations, even inevitable. Current practice in manual assembly lines is to balance them using the takt-time of each workstation and harmonize it. However, this approach mostly does not include ergonomic aspects and thus it may lead to workforce musculoskeletal disorders, extended leaves, and demotivation. This paper presents a holistic human-centric optimization method for line balancing using a novel indicator ̶ the ErgoTakt. ErgoTakt improves the legacy takt-time and helps to find an optimum between the ergonomic evaluation of an assembly station and its balance in time. The authors used a custom version of the ErgoSentinel Software and a Microsoft Kinect depth camera to perform online and real-time ergonomic assessment. An optimization algorithm is developed to find the best-fitting solution by minimizing a function of the ergonomic RULA-value and the cycle time of each assembly workstation with respect to the worker's ability. The paper presents the concept, the system-setup and preliminary evaluation of an assembly scenario. The results demonstrate that the new approach is feasible and able to optimize an entire manual assembly process chain in terms of both, economic aspects of a well-balanced production line as well as the ergonomic issue of long term human healthy work.}, language = {en} } @inproceedings{SchmittHillenbrandKranzetal., author = {Schmitt, Jan and Hillenbrand, Andreas and Kranz, Philipp and Kaupp, Tobias}, title = {Assisted human-robot-interaction for industrial assembly: Application of spatial augmented reality (sar) for collaborative assembly tasks}, series = {Companion of the 2021 ACM/IEEE International Conference on Human-Robot Interaction}, booktitle = {Companion of the 2021 ACM/IEEE International Conference on Human-Robot Interaction}, pages = {52 -- 56}, language = {en} } @inproceedings{SchmittKranzHillenbrandetal., author = {Schmitt, Jan and Kranz, Philipp and Hillenbrand, Andreas and Kaupp, Tobias}, title = {Assisted human-robot-interaction for industrial assembly: Video to assisted human-robot-interaction for industrial assembly}, series = {Companion of the 2021 ACM/IEEE International Conference on Human-Robot Interaction}, booktitle = {Companion of the 2021 ACM/IEEE International Conference on Human-Robot Interaction}, pages = {665 -- 667}, language = {en} } @inproceedings{VoglerKauppSchmittetal., author = {Vogler, N. and Kaupp, Tobias and Schmitt, Jan and Antelmann, H.}, title = {Maturity level models for the evaluation of the digitalization progress of assembly-intensive production processes}, series = {German Assembly Engineering 2019}, booktitle = {German Assembly Engineering 2019}, language = {en} } @inproceedings{KranzKristhofenSchirmeretal., author = {Kranz, Philipp and Kristhofen, Dennis and Schirmer, Fabian and Rose, Chad G. and Schmitt, Jan and Kaupp, Tobias}, title = {Gesture vs. Touch Control for Unforeseen Situations of Human-Robot Collaborative Assembly}, series = {2025 20th ACM/IEEE International Conference on Human-Robot Interaction (HRI)}, booktitle = {2025 20th ACM/IEEE International Conference on Human-Robot Interaction (HRI)}, publisher = {IEEE}, doi = {10.1109/HRI61500.2025.10974148}, pages = {1433 -- 1437}, language = {en} } @inproceedings{SchirmerKranzRoseetal., author = {Schirmer, Fabian and Kranz, Philipp and Rose, Chad G. and Willert, Volker and Schmitt, Jan and Kaupp, Tobias}, title = {Utilizing Eye Gaze for Human-Robot Collaborative Assembly}, series = {2025 20th ACM/IEEE International Conference on Human-Robot Interaction (HRI)}, booktitle = {2025 20th ACM/IEEE International Conference on Human-Robot Interaction (HRI)}, publisher = {IEEE}, doi = {10.1109/HRI61500.2025.10974041}, pages = {1603 -- 1607}, language = {en} } @article{MillerEngelmannKauppetal., author = {Miller, Eddi and Engelmann, Bastian and Kaupp, Tobias and Schmitt, Jan}, title = {Advanced Cascaded Scheduling for Highly Autonomous Production Cells with Material Flow and Tool Lifetime Consideration using AGVs}, series = {Journal of Machine Engineering}, journal = {Journal of Machine Engineering}, issn = {2391-8071}, language = {en} } @inproceedings{SeitzSchmittEngelmann, author = {Seitz, Philipp and Schmitt, Jan and Engelmann, Bastian}, title = {Evaluation of proceedings for SMEs to conduct I4.0 projects}, series = {Procedia Cirp}, volume = {86}, booktitle = {Procedia Cirp}, pages = {257 -- 263}, language = {en} } @inproceedings{SchirmerKranzSchmittetal., author = {Schirmer, Fabian and Kranz, Philipp and Schmitt, Jan and Kaupp, Tobias}, title = {Anomaly Detection for Dynamic Human-Robot Assembly: Application of an LSTM-based autoencoder to interpret uncertain human behavior in HRC}, series = {Companion of the 2023 ACM/IEEE International Conference on Human-Robot Interaction}, booktitle = {Companion of the 2023 ACM/IEEE International Conference on Human-Robot Interaction}, doi = {10.1145/3568294.3580100}, pages = {881 -- 883}, language = {en} }