@inproceedings{HartmannMachinBeynonetal., author = {Hartmann, J{\"u}rgen and Machin, Graham and Beynon, G. and Fourrez, S. and Lowe, D. and Morice, R. and Sadli, M. and Villamanan, M.}, title = {HIMERT: A pan-European project for development of metal-carbon eutectics as temperature standards}, address = {Chicago (USA)}, language = {en} } @inproceedings{HartmannTaubertHollandtetal., author = {Hartmann, J{\"u}rgen and Taubert, D. and Hollandt, J{\"o}rg and Fischer, J.}, title = {Investigation of the accuracy of the ITS-90 with reference to thermodynamic temperature in the range from 400 °C to 600 °C}, address = {Chicago (USA)}, language = {en} } @inproceedings{HartmannMcEvoyMachinetal., author = {Hartmann, J{\"u}rgen and McEvoy, H.C. and Machin, Graham and Friedrich, R. and Hollandt, J{\"o}rg}, title = {Comparison of the new NPL primary standard Ag fixed-point blackbody source with the primary standard fixed-point of PTB}, address = {Chicago (USA)}, language = {en} } @inproceedings{HartmannBloembergenSasajimaetal., author = {Hartmann, J{\"u}rgen and Bloembergen, P. and Sasajima, N. and Yamada, Y.}, title = {Comparing alternative schemes for realizing the high-temperature part of a future ITS-20XX with the aid of metal-carbon eutectic fixed points}, address = {Chicago (USA)}, language = {en} } @misc{HartmannTaubertFriedrichetal., author = {Hartmann, J{\"u}rgen and Taubert, Dieter Richard and Friedrich, R. and Hollandt, J{\"o}rg}, title = {Improved calibration of the spectral responsivity of interference filter radiometers in the visible and near infrared spectral range at PTB}, address = {Gaithersburg (USA)}, language = {en} } @misc{HartmannFischerSeidel, author = {Hartmann, J{\"u}rgen and Fischer, J. and Seidel, J.}, title = {Improved accuracy in measurement of radiometric apertures with a non-contact technique}, address = {Madrid (Spanien)}, language = {en} } @inproceedings{HartmannAnhaltTaubertetal., author = {Hartmann, J{\"u}rgen and Anhalt, Klaus and Taubert, Dieter Richard and Hollandt, J{\"o}rg}, title = {Absolute radiometry for the MeP-K}, series = {Tempmeko 2010}, booktitle = {Tempmeko 2010}, address = {Portoroz (Slowenien)}, language = {en} } @inproceedings{HartmannKrenekAnhaltetal., author = {Hartmann, J{\"u}rgen and Krenek, S. and Anhalt, Klaus and Lindemann, A. and Hollandt, J{\"o}rg}, title = {A dynamic method to measure emissivity at high-temperatures}, address = {Portoroz (Slowenien)}, language = {en} } @inproceedings{HartmannKeawprasertAnhaltetal., author = {Hartmann, J{\"u}rgen and Keawprasert, T. and Anhalt, Klaus and Taubert, Dieter Richard and Abd ElMageed, A. and Sperling, A.}, title = {Monochromator based absolute calibration of radiation thermometers}, address = {Portoroz (Slowenien)}, language = {en} } @inproceedings{HartmannAnhaltSchindleretal., author = {Hartmann, J{\"u}rgen and Anhalt, Klaus and Schindler, A. and Moriya, Y. and Sarge, S. and Pagel, R. and Denner, T.}, title = {Metal(carbide)-carbon eutectic high-temperature fixed-points for dynamic differential scanning calorimetry}, address = {Portoroz (Slowenien)}, language = {en} } @misc{HartmannAnhaltBuengeretal., author = {Hartmann, J{\"u}rgen and Anhalt, Klaus and B{\"u}nger, L. and Schreiber, Ekkehard}, title = {Practical high-temperature furnace for the application on thermometry and radiometry}, address = {Portoroz (Slowenien)}, language = {en} } @misc{HartmannAnhaltMachinetal., author = {Hartmann, J{\"u}rgen and Anhalt, Klaus and Machin, Graham and Woolliams, E. and Dury, M. and Yoon, H.}, title = {Absolute radiometry of metal-carbon eutectic fixed-points for a new temperature scale}, address = {Portoroz (Slowenien)}, language = {en} } @inproceedings{HartmannVoelker, author = {Hartmann, J{\"u}rgen and V{\"o}lker, S.}, title = {Thermisches Management von Lichtquellen}, address = {N{\"u}rnberg}, language = {de} } @inproceedings{HartmannVoelker, author = {Hartmann, J{\"u}rgen and V{\"o}lker, S.}, title = {Thermal Management an Lichtquellen}, address = {Berlin}, language = {de} } @inproceedings{HartmannTaubertMonteetal., author = {Hartmann, J{\"u}rgen and Taubert, Dieter Richard and Monte, C. and Baltruschat, C. and Gutschwager, B. and Hollandt, J{\"o}rg and Kochems, D. and K{\"u}chel, C. and te Plate, M.}, title = {Radiometric calibration of the NIRSpec instrument on the James Webb Space Telescope in the wavelength range from 0.7 µm to 5.0 µm}, address = {N{\"u}rnberg}, language = {en} } @inproceedings{HartmannAnhaltSchindleretal., author = {Hartmann, J{\"u}rgen and Anhalt, Klaus and Schindler, A. and Denner, T. and Sarge, S. and Pagel, R.}, title = {Eurtektische Hochtemperatur Fixpunkte f{\"u}r die dynamische Differenzkalorimetrie}, address = {N{\"u}rnberg}, language = {de} } @inproceedings{HartmannTaubertMonteetal., author = {Hartmann, J{\"u}rgen and Taubert, Dieter Richard and Monte, C. and Gutschwager, B. and Baltruschat, C. and Hollandt, J{\"o}rg and Kochems, D. and K{\"u}chel, C.}, title = {The Spectral Photon Flux of the Radiometric Calibration Spectral Source for the NIRSpec Instrument of the James Webb Space Telescope}, series = {Proceedings of NEWRAD}, booktitle = {Proceedings of NEWRAD}, pages = {79 -- 80}, language = {en} } @inproceedings{HartmannMonteAnhaltetal., author = {Hartmann, J{\"u}rgen and Monte, C. and Anhalt, Klaus and Gutschwager, B. and Taubert, Dieter Richard and Hollandt, J{\"o}rg}, title = {Calibration of Radiation Thermometers and Measurement of Spectral Emissivity Traceable non-contact temperature measurements in industrial and scientific applications}, series = {Proceedings Sensoren und Messsysteme 2008}, booktitle = {Proceedings Sensoren und Messsysteme 2008}, pages = {249 -- 261}, language = {en} } @inproceedings{HartmannAnhalt, author = {Hartmann, J{\"u}rgen and Anhalt, Klaus}, title = {Neuartige Hochtemperaturfixpunkte f{\"u}r die Photometrie, die Radiometrie und die Thermometrie}, address = {Bern (Schweiz)}, language = {de} } @inproceedings{HartmannAnhalt, author = {Hartmann, J{\"u}rgen and Anhalt, Klaus}, title = {Neuartige Metall-Kohlenstoff-Fixpunkte f{\"u}r die Anwendung in der Strahlungsthermometrie und der Radiometrie}, series = {Temperatur 2006}, booktitle = {Temperatur 2006}, pages = {135 -- 141}, language = {de} } @inproceedings{HartmannAnhalt, author = {Hartmann, J{\"u}rgen and Anhalt, Klaus}, title = {Novel High-temperature fixed-points for radiation thermometry, radiometry and photometry}, series = {Proceedings of Sensoren and Messsysteme 2006}, booktitle = {Proceedings of Sensoren and Messsysteme 2006}, isbn = {978-3-8007-2939-5}, pages = {145 -- 148}, language = {en} } @inproceedings{HartmannEdlerAnhaltetal., author = {Hartmann, J{\"u}rgen and Edler, F. and Anhalt, Klaus and Schiller, S.}, title = {Novel temperature standards for high-temperature calibration above 1100 °C}, series = {Proceedings of Sensor 2005}, booktitle = {Proceedings of Sensor 2005}, language = {en} } @inproceedings{HartmannGutschwagerHollandt, author = {Hartmann, J{\"u}rgen and Gutschwager, B. and Hollandt, J{\"o}rg}, title = {A novel lens-free high-accuracy InGaAs radiation thermometer for radiation temperatures above 300 °C}, series = {VDI-Bericht 1784}, booktitle = {VDI-Bericht 1784}, pages = {155 -- 162}, language = {en} } @inproceedings{HartmannSakumaMa, author = {Hartmann, J{\"u}rgen and Sakuma, F. and Ma, L.}, title = {Intercomparison of radiation temperatures scales between PTB and NMIJ from 1000 °C and 2500 °C}, series = {Proceedings of SICE 2002}, booktitle = {Proceedings of SICE 2002}, pages = {111 -- 115}, language = {en} } @inproceedings{HartmannGutschwagerFischeretal., author = {Hartmann, J{\"u}rgen and Gutschwager, B. and Fischer, Joachim and Hollandt, J{\"o}rg}, title = {Calibration of thermal cameras for temperature measurements using blackbody radiation in the temperature range -60°C up to 3000 °C}, series = {Proceedings of the International Conference Infrared Sensors \& Systems}, booktitle = {Proceedings of the International Conference Infrared Sensors \& Systems}, pages = {119 -- 124}, language = {en} } @inproceedings{HartmannGutschwagerFischeretal., author = {Hartmann, J{\"u}rgen and Gutschwager, B. and Fischer, Joachim and Hollandt, J{\"o}rg}, title = {Calibration of thermal cameras for temperature measurements using blackbody radiation in the temperature range -60 °C up to 3000 °C}, series = {IRS² 2002}, booktitle = {IRS² 2002}, address = {Erfurt}, language = {en} } @inproceedings{HartmannTaubertMonteetal., author = {Hartmann, J{\"u}rgen and Taubert, Dieter Richard and Monte, C. and Gutschwager, B. and Hollandt, J{\"o}rg}, title = {Traceable Calibration of Radiation Sources from the Visible to the Far Infrared for Space Borne Applications at PTB}, address = {Berlin}, language = {en} } @inproceedings{HartmannKrenekAnhaltetal., author = {Hartmann, J{\"u}rgen and Krenek, S. and Anhalt, Klaus and Lindemann, A. and Monte, C. and Hollandt, J{\"o}rg}, title = {A study on the feasibility of measuring the emissivity with the laser-flash method}, address = {Boulder (USA)}, language = {en} } @inproceedings{HartmannWerner, author = {Hartmann, J{\"u}rgen and Werner, L.}, title = {Calibration and interpolation of the spectral responsivity of silicon photodiode based detectors}, address = {Dresden}, language = {en} } @misc{HartmannEdler, author = {Hartmann, J{\"u}rgen and Edler, F.}, title = {Simultaneous contact and non-contact measurements of the melting temperature of a N-C fixed-point cell}, address = {Banf (Kanada)}, language = {en} } @inproceedings{HartmannWerner, author = {Hartmann, J{\"u}rgen and Werner, L.}, title = {Radiation thermometry towards the triple point of water?}, address = {Banf (Kanada)}, language = {en} } @misc{HartmannAnhaltZelenjuketal., author = {Hartmann, J{\"u}rgen and Anhalt, Klaus and Zelenjuk, A. and Taubert, Dieter Richard}, title = {New PTB Set-up for the absolute calibration of the spectral responsivity of radiation thermometers}, address = {Banf (Kanada)}, language = {en} } @inproceedings{HartmannMachinBloembergenetal., author = {Hartmann, J{\"u}rgen and Machin, Graham and Bloembergen, P. and Sadli, M. and Yamada, Y.}, title = {A concerted international project to establish hig-temperature fixed-points for primary thermometry}, address = {Banf (Kanada)}, language = {en} } @misc{HartmannSadliAnhaltetal., author = {Hartmann, J{\"u}rgen and Sadli, M. and Anhalt, Klaus and Schiller, S.}, title = {Thermal effects in the bb3200pg on m-c eutectic implementation}, address = {Banf (Kanada)}, language = {en} } @inproceedings{HartmannAnhaltWangetal., author = {Hartmann, J{\"u}rgen and Anhalt, Klaus and Wang, Y. and Yamada, Y.}, title = {Large and small aperture Fixed-point cells of Cu, Pt-C, and Re-c}, address = {Banf (Kanada)}, language = {en} } @inproceedings{HartmannAnhaltLoweetal., author = {Hartmann, J{\"u}rgen and Anhalt, Klaus and Lowe, D. and Machin, G. and Sadli, M. and Yamada, Y.}, title = {Thermodynamic Temperature determination of Co-C, Pd-C, Pt-C, and Ru-C eutectic fixed point cells}, address = {Davos (Schweiz)}, language = {en} } @inproceedings{BlotevogelEgermannGoldlueckeetal., author = {Blotevogel, Thomas and Egermann, Jan and Goldl{\"u}cke, J{\"u}rgen and Leipertz, Alfred and Hartmann, Matthias and Schenk, Martin and Berckm{\"u}ller, Martin}, title = {Untersuchungen zur Gemsichbildung in Wasserstoffmotoren}, editor = {Leipertz, Alfred}, publisher = {Esytec}, address = {Erlangen}, isbn = {3-931901-27-0}, pages = {12}, abstract = {Mittels der planaren laserinduzierten Fluoreszenz (PLIF) k{\"o}nnen im Brennraum eines Transparentmotors Messungen durchgef{\"u}hrt werden, die den Gemischbildungsprozess beim Wasserstoffmotor zweidimensional qualitativ darstellen. Auch quantitative Messungen und damit Aussagen {\"u}ber das Kraftstoff-Luft-Verh{\"a}ltnis im Brennraum sind m{\"o}glich. F{\"u}r diese Messungen wird ein Gasgemisch ans Helium und einer Tracersubstanz verwendet, und der Motor wird geschleppt. Bei Betrieb des Motors in der Teillast sind auch Messungen im gefeuerten Betrieb, d.h. mit Wasserstoff und zugesetzter Tracersubstanz, m{\"o}glich. Durch direkte Messung des Kraftstoff-Luft-Verh{\"a}ltnisses und der Wasserstoffkonzentration am befeuerten Aggregat mit Hilfe der Raman-Spektroskopie konnte nachgewiesen werden, daß mittels PLIF der Einstr{\"o}mvorgang qualitativ und das Kraftstoff-Luft-Verh{\"a}ltnis quantitativ grunds{\"a}tzlich richtig erfaßt werden. Qualitative und quantitative PLIF-Messungen sind prinzipiell nicht nur bei Wasserstoffmotoren, sondern auch bei Gasmotoren mit anderen Brenngasen denkbar. Allerdings sind noch weitere Arbeiten erforderlich, um den Quantifizierungsfehler deutlich abzusenken. Zuk{\"u}nftiges Verbesserungspotential f{\"u}r diese Meßtechnik besteht in verschiedenen Punkten. Dazu geh{\"o}rt die Optimierung und Anpassung der Mischstrecke zur Erzeugung des Gas-Luft-Gemisches mit definiertem Kraftstoff-Luft-Verh{\"a}ltnis an die jeweiligen Meßaufgaben, um den relativen Fehler des Lambda-Wertes noch weiter zu reduzieren. Eine Verringerung der Tracerkonzentration erscheint problemlos m{\"o}glich. Um das Problem der Hintergrundfluoreszenz zu l{\"o}sen, sind verschiedene M{\"o}glichkeiten denkbar, die noch genauer zu untersuchen sind.}, language = {de} } @article{HartmannMachinBloembergenetal., author = {Hartmann, J{\"u}rgen and Machin, Graham and Bloembergen, P. and Anhalt, Klaus and Sadli, M. and Saunders, P. and Woolliams, E. and Yamada, Y. and Yoon, H.}, title = {Practical implementation of the mise-en-pratique for the definition of the Kelvin above the silver point}, series = {International Journal of Thermophysics}, journal = {International Journal of Thermophysics}, number = {31}, pages = {1779 -- 1788}, language = {en} } @article{HartmannKhlevnoyRougieetal., author = {Hartmann, J{\"u}rgen and Khlevnoy, B. and Rougie, B. and Gibson, C. and Yoon, H. and Gaertner, A. and Taubert, Dieter Richard}, title = {CCPR-S1 Supplementary Comparison for Spectral Radiance in the range of 220 nm to 2500 nm}, series = {Metrologia}, journal = {Metrologia}, number = {46}, pages = {174 -- 180}, language = {en} } @article{HartmannKrenekAnhaltetal., author = {Hartmann, J{\"u}rgen and Krenek, S. and Anhalt, Klaus and Lindemann, A. and Hollandt, J{\"o}rg}, title = {A study on the feasibility of measuring the emissivity with the laser-flash method}, series = {International Journal of Thermophysics}, journal = {International Journal of Thermophysics}, number = {31}, pages = {998 -- 1010}, language = {en} } @article{HartmannAnhaltLindneretal., author = {Hartmann, J{\"u}rgen and Anhalt, Klaus and Lindner, D. and Kr{\"u}ger, U.}, title = {Camera based investigation of high-temperature fixed-points for radiometric application}, series = {Metrologia}, journal = {Metrologia}, number = {46}, pages = {260 -- 265}, language = {en} } @article{HartmannOjanenAnhaltetal., author = {Hartmann, J{\"u}rgen and Ojanen, M. and Anhalt, Klaus and Schiller, S. and Weckstr{\"o}m, T. and K{\"a}rh{\"a}, P. and Heinonen, M. and Ikonen, E.}, title = {Comparison of the radiation temperature scales between MIKES and PTB}, series = {Measurement}, journal = {Measurement}, number = {43}, pages = {183 -- 189}, language = {en} } @article{HoefflinSauerSchiffleretal., author = {H{\"o}fflin, Dennis and Sauer, Christian and Schiffler, Andreas and Hartmann, J{\"u}rgen}, title = {Process Monitoring Using Synchronized Path Infrared Thermography in PBF-LB/M}, series = {Sensors}, volume = {22}, journal = {Sensors}, number = {16}, publisher = {MDPI}, doi = {10.3390/s22165943}, pages = {5943}, abstract = {Additive manufacturing processes, particularly Laser-Based Powder Bed Fusion of Metals (PBF-LB/M), enable the development of new application possibilities due to their manufacturing-specific freedom of design. These new fields of application require a high degree of component quality, especially in safety-relevant areas. This is currently ensured primarily via a considerable amount of downstream quality control. Suitable process monitoring systems promise to reduce this effort drastically. This paper introduces a novel monitoring method in order to gain process-specific thermal information during the manufacturing process. The Synchronized Path Infrared Thermography (SPIT) method is based on two synchronized galvanometer scanners allowing high-speed and high-resolution observations of the melt pool in the SWIR range. One scanner is used to steer the laser over the building platform, while the second scanner guides the field of view of an IR camera. With this setup, the melting process is observed at different laser powers, scan speeds and at different locations with respect to the laser position, in order to demonstrate the positioning accuracy of the system and to initially gain thermal process data of the melt pool and the heat-affected zone. Therefore, the SPIT system shows a speed independent overall accuracy of ±2 Pixel within the evaluated range. The system further allows detailed thermal observation of the melt pool and the surrounding heat-affected zone.}, language = {en} } @incollection{HartmannHollandtSakumaetal., author = {Hartmann, J{\"u}rgen and Hollandt, J{\"o}rg and Sakuma, F. and Khlevnoy, B. and Morozova, S.}, title = {Blackbody and other Calibration Sources, in Radiometric Temperature Measurements Part I Fundamentals}, series = {Experimental Methods in the Physical Sciences}, volume = {42}, booktitle = {Experimental Methods in the Physical Sciences}, editor = {Zhang, Z.M. and Tsai, B.K. and Machin, Graham}, publisher = {Elsevier Academic Press}, address = {Amsterdam}, isbn = {978-0-12-374021-2}, pages = {241 -- 295}, language = {en} } @article{HartmannWernerFischeretal., author = {Hartmann, J{\"u}rgen and Werner, L. and Fischer, J. and Johannsen, U.}, title = {Accurate determination of the spectral responsivity of silicon trap detectors between 238 nm and 1015 nm using a laser-based cryogenic radiometer}, series = {Metrologia}, journal = {Metrologia}, number = {37}, pages = {279 -- 284}, language = {en} } @article{HartmannVoigtReichling, author = {Hartmann, J{\"u}rgen and Voigt, P. and Reichling, M.}, title = {Measuring local thermal conductivity in polycrystalline diamond with a high resolution photothermal microscope}, series = {J. Appl. Phys.}, journal = {J. Appl. Phys.}, number = {81}, pages = {2966 -- 2977}, language = {en} } @article{HartmannFischerSeidel, author = {Hartmann, J{\"u}rgen and Fischer, J. and Seidel, J.}, title = {A non-contact technique providing improved accuracy in area measurements of radiometric apertures}, series = {Metrologia}, journal = {Metrologia}, number = {37}, pages = {637 -- 640}, language = {en} } @article{HartmannWerner, author = {Hartmann, J{\"u}rgen and Werner, L.}, title = {Calibration and interpolation of the spectral responsivity of silicon photodiode based detectors}, series = {Sensors \& Actuators A: Physical}, journal = {Sensors \& Actuators A: Physical}, number = {156}, pages = {185 -- 190}, language = {en} } @article{HartmannKlotzbuecherReichling, author = {Hartmann, J{\"u}rgen and Klotzb{\"u}cher, T. and Reichling, M.}, title = {Local variation of room temperature thermal conductivity in high quality polycrystalline diamond}, series = {Appl. Phys. Lett.}, journal = {Appl. Phys. Lett.}, number = {73}, pages = {756 -- 758}, language = {en} } @article{HartmannCostelloReichling, author = {Hartmann, J{\"u}rgen and Costello, M. and Reichling, M.}, title = {The influence of thermal barriers on heat flow in high quality chemical vapour deposited diamond}, series = {Phys. Rev. Lett.}, journal = {Phys. Rev. Lett.}, number = {80}, pages = {117 -- 120}, language = {en} } @incollection{HartmannBernhard, author = {Hartmann, J{\"u}rgen and Bernhard, Frank}, title = {Strahlungsthermometrie}, series = {Technische Temperaturmessung}, booktitle = {Technische Temperaturmessung}, editor = {Bernhard, Frank}, edition = {2}, publisher = {Springer}, isbn = {ISBN 978-3-642-24505-3}, language = {de} } @article{HartmannVerhoevenReichlingetal., author = {Hartmann, J{\"u}rgen and Verhoeven, H. and Reichling, M. and M{\"u}ller-Sebert, W. and Zachai, R.}, title = {Structural limitations to local thermal diffusivity of diamond films}, series = {Diamond and Related Materials}, journal = {Diamond and Related Materials}, number = {5}, pages = {1012 -- 1016}, language = {en} } @article{HartmannMaznevReichling, author = {Hartmann, J{\"u}rgen and Maznev, A.A. and Reichling, M.}, title = {Thermal wave propagation in thin films on substrates}, series = {J. Appl. Phys}, journal = {J. Appl. Phys}, number = {78}, pages = {5266 -- 5269}, language = {en} } @article{HartmannLangerReichling, author = {Hartmann, J{\"u}rgen and Langer, G. and Reichling, M.}, title = {Thermal conductivity of thin metallic films measured with the photothermal profile analysis}, series = {Rev. Sci. Instr.}, journal = {Rev. Sci. Instr.}, number = {68}, pages = {1510 -- 1513}, language = {en} } @article{HartmannReichlingVoigt, author = {Hartmann, J{\"u}rgen and Reichling, M. and Voigt, P.}, title = {Quantitative thermal imaging of current densities and heat flow in electronic microstructures}, series = {Prog. in Nat. Sci.}, journal = {Prog. in Nat. Sci.}, number = {6}, pages = {519 -- 523}, language = {en} } @article{HartmannReichlingMatthias, author = {Hartmann, J{\"u}rgen and Reichling, M. and Matthias, E.}, title = {Thermoreflectance measurements of single thermal barriers in CVD-diamond}, series = {Prog. in Nat. Sci.}, journal = {Prog. in Nat. Sci.}, number = {6}, pages = {297 -- 300}, language = {en} } @article{HartmannVoigtReichlingetal., author = {Hartmann, J{\"u}rgen and Voigt, P. and Reichling, M. and Matthias, E.}, title = {Photothermal measurement of thermal anisotropy in pyrolytic graphite}, series = {Appl. Phys. B}, journal = {Appl. Phys. B}, number = {62}, pages = {493 -- 497}, language = {en} } @article{HartmannVoigtReichling, author = {Hartmann, J{\"u}rgen and Voigt, P. and Reichling, M.}, title = {Thermal wave imaging of electrically heated microstructures}, series = {J. Appl. Phys.}, journal = {J. Appl. Phys.}, number = {80}, pages = {2013 -- 2018}, language = {en} } @inproceedings{HartmannManaraZipfetal., author = {Hartmann, J{\"u}rgen and Manara, Jochen and Zipf, Matthias and Stark, Thomas and Arduini, Mariacarla and Ebert, Hans-Peter and Tutschke, Andreas and Hallam, Andrew and Hanspal, Jagdevinder and Langley, Mark and Hodge, D.}, title = {Development of Long Wavelength Infrared Radiation Thermometry for Measurements in Gas Turbines}, address = {Darmstadt}, language = {en} } @inproceedings{HartmannMachinBloembergenetal., author = {Hartmann, J{\"u}rgen and Machin, Graham and Bloembergen, P. and Anhalt, Klaus and Sadli, M. and Saunders, P. and Woolliams, E. and Yamada, Y. and Yoon, H.}, title = {Practical implementation of the mise-en-prtique for the definition of the Kelvin above the silver point}, address = {Portroz (Slowenien)}, language = {en} } @inproceedings{HartmannKnoppLenskietal., author = {Hartmann, J{\"u}rgen and Knopp, Kevin and Lenski, Philipp and Z{\"a}nglein, Marc and Manara, Jochen and Stark, Thomas and Zipf, Matthias and Arduini, Mariacarla and Schreiber, Ekkehard and Kr{\"u}ger, U. and Schmidt, Franz and Brunner, Martin}, title = {Sensor systems for additive manufacturing}, publisher = {Key Note Lecture MSE 2018}, address = {Darmstadt}, language = {en} } @incollection{HartmannReichling, author = {Hartmann, J{\"u}rgen and Reichling, M.}, title = {Thermal characterization of diamond materials}, series = {Properties and growth of diamond}, booktitle = {Properties and growth of diamond}, editor = {Nazar{\´e}, H. and Neves, A.J.}, publisher = {Institution of Electrical Engineers}, address = {London}, language = {en} } @inproceedings{ZinkDotterweichHartmannetal., author = {Zink, Markus H. and Dotterweich, C. and Hartmann, J{\"u}rgen and Harrer, S. and Hemberger, F. and Ebert, Hans-Peter and Schnitzler, Tim}, title = {Phase Change Materials for Use in Thermally and Electrically Stressed Insulation for High Voltage Applications}, series = {IEEE Electrical Insulation Conference}, volume = {2016}, booktitle = {IEEE Electrical Insulation Conference}, pages = {605 -- 608}, language = {en} } @inproceedings{HartmannAnhaltHollandtetal., author = {Hartmann, J{\"u}rgen and Anhalt, Klaus and Hollandt, J{\"o}rg and Taubert, Dieter Richard and Werner, L.}, title = {Optische Hochtemperaturmesstechnik f{\"u}r die Thermometrie, Radiometrie und Photometrie}, address = {N{\"u}rnberg}, language = {en} } @inproceedings{HartmannOchsLenskietal., author = {Hartmann, J{\"u}rgen and Ochs, Dennis and Lenski, Philipp and Schiffler, Andreas and Versch, Alexander and Manara, Jochen}, title = {Thermal process monitoring for additive manufacturing}, address = {Darmstadt}, language = {en} } @article{HartmannNilssonFricke, author = {Hartmann, J{\"u}rgen and Nilsson, O. and Fricke, J.}, title = {Thermal diffusivity measurements on two-layered systems with the laser-flash method}, series = {High Temp. - High Press}, journal = {High Temp. - High Press}, number = {25}, pages = {403 -- 410}, language = {en} } @article{OchsWehnertHartmannetal., author = {Ochs, Dennis and Wehnert, Kira-Kristin and Hartmann, J{\"u}rgen and Schiffler, Andreas and Schmitt, Jan}, title = {Sustainable Aspects of a Metal Printing Process Chain with Laser Powder Bed Fusion (LPBF)}, series = {Procedia CIRP}, volume = {98}, journal = {Procedia CIRP}, publisher = {Elsevir}, pages = {613 -- 618}, abstract = {Production companies are getting more and more aware of the relevancy of energy costs and the environmental impact of their manufactured products. Hence, the knowledge about the energy intensity of new process technologies as metal printing becomes increasingly crucial. Therefore, data about the energy intensity of entire process chains allow a detailed assessment of the life cycle costs and environmental impact of metal printed parts. As metal printing with Laser Powder Bed Fusion (LPBF) is applied from rapid prototyping to serial manufacturing processes more and more, sustainability data are useful to support a valid scale-up scenario and energetic improvements of the 3D-printing machinery as well as peripheral aggregates used in the process chain. The contribution aims to increase the transparency of the LPBF process chain in terms of its energy consumption. Therefore a generalized model to assess sustainability aspects of metal printed parts is derived. For this purpose, the LPBF process chain with the essential pre-, main- and post-processes is evaluated regarding its energy intensity. Here, the sub-processes, for example wet and dry cleaning of the printer, sieving of the metal powder or sand-blasting of the part are analyzed as well as the main printing process. Based on the derived experimental data from an installed, industry-like process chain, a model is created, which tends to generalize the experimental findings to evaluate other metal printed parts and process chain variants in terms of their energy intensity.}, language = {en} } @inproceedings{HartmannLenskiOchsetal., author = {Hartmann, J{\"u}rgen and Lenski, Philipp and Ochs, Dennis and Shandy, Amir and Winterstein, A. and Versch, Alexander and Schiffler, Andreas}, title = {Thermische Prozess{\"u}berwachung f{\"u}r additive Fertigungsverfahren}, address = {Berlin}, language = {de} } @inproceedings{HartmannDzemkoEngelmannetal., author = {Hartmann, J{\"u}rgen and Dzemko, Mikita and Engelmann, Bastian and Schmitt, Jan}, title = {Toward Shifted Production Strategies Through Additive Manufacturing: A Technology and Market Review for Changing Value Chains}, series = {7th CIRP Global Web Conference (86)}, volume = {86}, booktitle = {7th CIRP Global Web Conference (86)}, doi = {10.1016/j.procir.2020.01.029}, pages = {228 -- 233}, abstract = {In the last decade many different additive manufacturing (AM) technologies for metal, plastic or ceramic processing raise from research to commercialization. As a result, AM grows into different business areas and transforms structures and processes. Hence, the contribution tends to show the change in added values though the availability of different additive manufacturing technologies based on a technology screening and market research. Regarding the named purpose, a broad market research of 83 companies and 339 printer models has been conducted to find patterns of AM technology market share and regions to structure indicators such as accuracy by processed material classes with a specified AM method. Printing materials as metal, plastic, ceramic and carbon have been considered. The categorization is done by the AM principles: power bed fusion, material extrusion, vat photopolymerization and …}, language = {en} } @inproceedings{HartmannManaraZipfetal., author = {Hartmann, J{\"u}rgen and Manara, Jochen and Zipf, Mathias and Stark, Thomas and Knopp, Kevin and Z{\"a}nglein, Marc and Lenski, Philipp and Schreiber, Ekkehard and Schmidt, Franz and Brunner, Martin and M{\"u}ller, Michael}, title = {Thermophysical property measurements at high-temperatures for power engineering and additive manufacturing processes}, address = {Berlin}, isbn = {978-3-940283-94-8}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:863-opus-17678}, pages = {6}, abstract = {To address the needs for increasing efficiency in power conversion, stratified structures like thermal barrier coatings, are used to increase operation temperature. Also advanced material processing like 3D laser printing of metals and ceramics are based on a layer-to-layer process at high temperatures, resulting in non-homogeneous components. Both systems require more and more detailed investigation methods to characterise the material properties of the resulting structures and to optimize the relevant processes. To address the required needs in advanced material characterisation recently an attempt was started to develop a unique measurement set-up for advanced material characterisation. This method is based on the well know laser flash principle, which was improved by adding supplementary heating sources and additional detection channels. Combining different heating mechanism and heating times with the two-dimensional measuring of the thermal flow across the sample enables the determination of different opto-thermal parameters and other material properties, e.g. mechanical contact, electrical conductivity or optical data, which also depend on or affect the flow of heat. In this paper we describe the implementation of the different optical methods to measure the thermal heat flow by point-like and two-dimensional temperature measurement and present first results on several samples.}, language = {en} } @article{KnoppShandyManaraetal., author = {Knopp, Kevin and Shandy, Amir and Manara, Jochen and Vidi, Stephan and Hartmann, J{\"u}rgen}, title = {Metrologische Apparaturen zur Messung thermophysikalischer Materialeigenschaften bei sehr hohen Temperaturen im EU-Projekt Hi-TRACE}, series = {FHWS Science Journal}, volume = {5}, journal = {FHWS Science Journal}, number = {2}, issn = {2196-6095}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:863-opus-20046}, pages = {83 -- 92}, abstract = {Industriezweige wie die Glas-Industrie, die Kraftwerkstechnik sowie die Luft- und Raumfahrttechnik m{\"u}ssen kontinuierlich neue Methoden entwickeln, sowie bestehende Verfahren optimieren, um in ihren Bereichen wettbewerbsf{\"a}hig zu sein bzw. neue Anforderungen an Umwelt- und Klimaschutz zu erf{\"u}llen. Dies beinhaltet oft die Entwicklung neuer Materialien, die leichter zu fabrizieren sind und sowohl mechanisch als auch thermisch h{\"o}heren Belastungen standhalten. F{\"u}r die genannten Industriezweige sind Prozesse mit hohen Betriebstemperaturen bis zu 3.000 °C kennzeichnend und damit ist die Kenntnis von Materialeigenschaften bei diesen extremen Temperaturen von großer Bedeutung. Auch wenn es bereits einige Messapparaturen f{\"u}r die Bestimmung von thermophysikalischen Materialdaten bei hohen Temperaturen gibt, muss die R{\"u}ckf{\"u}hrung dieser auf die SI Basiseinheiten gew{\"a}hrleistet werden, um die Zuverl{\"a}ssigkeit der gemessenen Daten f{\"u}r die Anforderung der genannten Branchen sicherzustellen. Diese Aufgabe ist das Ziel des EMPIR-(European Metrology Programme for Innovation and Research) Projektes Hi-TRACE [1]. Hi-TRACE zielt darauf ab, Referenzapparaturen und neue Methoden f{\"u}r die Messung von thermophysikalischen Materialeigenschaften, (thermische Diffusivit{\"a}t, spezifische W{\"a}rme, Emissionsgrad und Schmelztemperatur) sowie der Haftung von Schichten {\"u}ber 1.000 °C zu bestimmen.}, language = {de} } @article{OchsWehnertKnoppetal., author = {Ochs, Dennis and Wehnert, Kira-Kristin and Knopp, Kevin and Hartmann, J{\"u}rgen and Versch, Alexander and Schiffler, Andreas}, title = {Untersuchungen zur Temperaturleitf{\"a}higkeit additiv gefertigter Stahlproben in Abh{\"a}ngigkeit der relativen Dichte}, series = {FHWS Science Journal}, volume = {5}, journal = {FHWS Science Journal}, number = {2}, issn = {2196-6095}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:863-opus-19986}, pages = {75 -- 82}, abstract = {Das direkte Metall-Laser-Schmelzen (DMLS) aus der Familie der Additiven Fertigungsverfahren (AM) erm{\"o}glicht die schichtweise Erzeugung komplexer dreidimensionaler Geometrien mit hoher relativer Dichte unter Verwendung von Metallpulver als Ausgangsmaterial [1]. Die Technologie wird zunehmend eingesetzt, um innovative Bauteile material- und gewichtssparend herzustellen oder komplexe Produkte ohne zus{\"a}tzliche Werkzeuge oder Spannvorrichtungen zu fertigen. Dar{\"u}ber hinaus sind Funktionsintegrationen, zum Beispiel Gussformen mit eingepr{\"a}gten K{\"u}hlkan{\"a}len, m{\"o}glich. Da einzelne Metallpulverschichten auf vorhergehende Schichten aufgeschmolzen werden, entstehen w{\"a}hrend der Herstellung des Bauteils komplexe, zeitabh{\"a}ngige Temperaturprofile [2]. Durch den Einsatz hoher Laserintensit{\"a}ten und Scangeschwindigkeiten, bei denen die Belichtungszeit der Laserbestrahlung im Bereich von Millisekunden liegt, werden zudem extrem hohe Aufheiz- und Abk{\"u}hlraten induziert, die zu einzigartigen Mikrostrukturen und Materialeigenschaften f{\"u}hren [3]. Diese extremen Prozessbedingungen k{\"o}nnen sich jedoch auch negativ auf den Fertigungsprozess auswirken. Bei komplexen Bauteilen bleibt die Prozessstabilit{\"a}t und Qualit{\"a}tssicherung Umfragen zufolge weiterhin die wichtigste technologische Barriere f{\"u}r den Einsatz additiv gefertigter Bauteile in hochbelasteten oder sicherheitsrelevanten Bereichen [4]. Daher verspricht der Zusammenhang zwischen Temperaturprofil w{\"a}hrend der Fertigung, relativer Dichte der Bauteile, sowie thermophysikalischer Eigenschaften additiv gefertigter Proben wichtige Erkenntnisse, insbesondere im Hinblick auf eine zerst{\"o}rungsfreie Qualit{\"a}tssicherung, sowie neue Anwendungsm{\"o}glichkeiten.}, language = {de} } @article{JuergenArduiniManaraetal., author = {J{\"u}rgen, Hartmann and Arduini, Mariacarla and Manara, Jochen and Stark, Thomas and Ebert, Hans-Peter}, title = {Development and Evaluation of an Improved Apparatus for Measuring the Emissivity at High Temperatures}, series = {Sensors}, volume = {21}, journal = {Sensors}, number = {18}, issn = {1424-8220}, doi = {10.3390/s21186252}, abstract = {An improved apparatus for measuring the spectral directional emissivity in the wavelength range between 1 µm and 20 µm at temperatures up to 2400 K is presented in this paper. As a heating unit an inductor is used to warm up the specimen, as well as the blackbody reference to the specified temperatures. The heating unit is placed in a double-walled vacuum vessel. A defined temperature, as well as a homogenous temperature distribution of the whole surrounding is ensured by a heat transfer fluid flowing through the gap of the double-walled vessel. Additionally, the surrounding is coated with a high-emitting paint and serves as blackbody-like surrounding to ensure defined boundary conditions. For measuring the spectral directional emissivity at different emission angles, a movable mirror is installed in front of the specimen, which can be adjusted by a rotatable arrangement guiding the emitted radiation into the attached FTIR-spectrometer. The setup of the emissivity measurement apparatus (EMMA) and the measurement procedure are introduced, and the derived measurement results are presented. For evaluating the apparatus, measurements were performed on different materials. The determined emissivities agree well with values published in literature within the derived relative uncertainties below 4\% for most wavelengths.}, language = {en} } @article{HartmannLitorjaFowleretal., author = {Hartmann, J{\"u}rgen and Litorja, M. and Fowler, J. and Fox, N. and Stock, M. and Razet, A. and Khlevnoy, B. and Ikonen, E. and Machacs, M. and Doytchinov, K.}, title = {Final report on the CCPR-S2 supplementary comparison of area measurements of apertures for radiometry}, series = {Metrologia}, volume = {44}, journal = {Metrologia}, number = {02002}, language = {en} } @article{HartmannMoritzRothetal., author = {Hartmann, J{\"u}rgen and Moritz, W. and Roth, U. and Heyde, M. and Rademann, K. and Reichling, M.}, title = {Submicrosecond range surface heating and temperature measurement for efficient sensor reactivation}, series = {Thin Solid Films}, journal = {Thin Solid Films}, number = {391}, pages = {143 -- 148}, language = {en} } @inproceedings{HartmannDobhanEngelmannetal., author = {Hartmann, J{\"u}rgen and Dobhan, Alexander and Engelmann, Bastian and Eberhardt, Lars and Heusinger, Moritz and Raab, C and Schleif, Frank-Michael and T{\"u}rk, M.}, title = {Optimierung von Prozessen und Werkzeugmaschinen durch Bereitstellung, Analyse und Soll-Ist-Vergleich von Produktionsdaten: Digitalkonferenz}, language = {en} } @article{HartmannThuillierFoujolsetal., author = {Hartmann, J{\"u}rgen and Thuillier, G. and Foujols, T. and Bols{\´e}e, D. and Gillotay, D. and Hers{\´e}, M. and Petermanns, W. and Decupyer, W. and Mandel, H. and Sperfeld, P. and Taubert, Dieter Richard}, title = {SOLAR/SOLSPEC}, series = {Solar Physics}, journal = {Solar Physics}, number = {257}, pages = {185 -- 213}, language = {en} } @article{HartmannAnhaltLoweetal., author = {Hartmann, J{\"u}rgen and Anhalt, Klaus and Lowe, D. and Machin, Graham and Sadli, M. and Yamada, Y.}, title = {Thermodynamic temperature determinations of Co-C, Pd-C Pt-C and Ru-C eutectic fixed-points cells}, series = {Metrologia}, volume = {43}, journal = {Metrologia}, number = {2}, pages = {78 -- 83}, language = {en} } @article{HartmannMachinBloembergenetal., author = {Hartmann, J{\"u}rgen and Machin, G. and Bloembergen, P. and Sadli, M. and Yamada, Y.}, title = {A concerted international project to establish high-temperature fixed-points for primary thermometry}, series = {International Journal of Thermophysics}, journal = {International Journal of Thermophysics}, number = {28}, pages = {1976 -- 1982}, language = {en} } @incollection{HartmannReichling, author = {Hartmann, J{\"u}rgen and Reichling, M.}, title = {Thermal transport in diamond}, series = {Properties and growth of diamond}, booktitle = {Properties and growth of diamond}, editor = {Nazar{\´e}, H. and Neves, A.J.}, publisher = {Institution of Electrical Engineers}, address = {London}, language = {en} } @article{HartmannSadliAnhaltetal., author = {Hartmann, J{\"u}rgen and Sadli, M. and Anhalt, Klaus and Schiller, S.}, title = {Thermal effects in the BB3200pg on M-C eutectic implementation}, series = {International Journal of Thermophysics}, journal = {International Journal of Thermophysics}, number = {30}, pages = {69 -- 76}, language = {en} } @article{Hartmann, author = {Hartmann, J{\"u}rgen}, title = {New Developments in High-Temperature Measurement Techniques}, series = {International Journal of Electrical and Computer Engineering Systems}, volume = {5}, journal = {International Journal of Electrical and Computer Engineering Systems}, number = {2}, pages = {63 -- 67}, language = {en} } @article{HartmannEngertFellmuthetal., author = {Hartmann, J{\"u}rgen and Engert, J. and Fellmuth, B. and Fischer, Joachim and Hollandt, J{\"o}rg and Tegeler, E. and Seidel, J.}, title = {Die internationale Temperaturskalen}, series = {PTB Mitteilungen}, volume = {117}, journal = {PTB Mitteilungen}, number = {3}, pages = {236 -- 242}, language = {de} } @article{HartmannFischerJohannsenetal., author = {Hartmann, J{\"u}rgen and Fischer, J. and Johannsen, U. and Werner, L.}, title = {Analytical model for the temperature dependence of the spectral responsivity of silicon}, series = {J. Opt. Soc. Am. B}, journal = {J. Opt. Soc. Am. B}, number = {18}, pages = {942 -- 947}, language = {en} } @article{HoefflinSauerSchiffleretal., author = {H{\"o}fflin, Dennis and Sauer, Christian and Schiffler, Andreas and Versch, Alexander and Hartmann, J{\"u}rgen}, title = {Active thermography for in-situ defect detection in laser powder bed fusion of metal}, series = {Journal of Manufacturing Processes}, volume = {131}, journal = {Journal of Manufacturing Processes}, publisher = {Elsevier BV}, issn = {1526-6125}, doi = {10.1016/j.jmapro.2024.09.085}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:863-opus-57601}, pages = {1758 -- 1769}, abstract = {Additive manufacturing (AM) has revolutionized production by offering design flexibility, reducing material waste, and enabling intricate geometries that are often unachievable with traditional methods. As the use of AM for metals continues to expand, it is crucial to ensure the quality and integrity of printed components. Defects can compromise the mechanical properties and performance of the final product. Non-destructive testing (NDT) techniques are necessary to detect and characterize anomalies during or post-manufacturing. Active thermography, a thermal imaging technique that uses an external energy source to induce temperature variations, has emerged as a promising tool in this field. This paper explores the potential of in-situ non-destructive testing using the processing laser of a PBF-LB/M setup as an excitation source for active thermography. With this technological approach, artificially generated internal defects underneath an intact surface can be detected down to a defect size of 350 μm - 450 μm.}, language = {en} } @article{HoefflinSauerSchiffleretal., author = {H{\"o}fflin, Dennis and Sauer, Christian and Schiffler, Andreas and Manara, Jochen and Hartmann, J{\"u}rgen}, title = {Pixelwise high-temperature calibration for in-situ temperature measuring in powder bed fusion of metal with laser beam}, series = {Heliyon}, volume = {10}, journal = {Heliyon}, number = {7}, publisher = {Elsevier BV}, issn = {2405-8440}, doi = {10.1016/j.heliyon.2024.e28989}, abstract = {High-temperature calibration methods in additive manufacturing involve the use of advanced techniques to accurately measure and control the temperature of the build material during the additive manufacturing process. Infrared cameras, blackbody radiation sources and non-linear optimization algorithms are used to correlate the temperature of the material with its emitted thermal radiation. This is essential for ensuring the quality and repeatability of the final product. This paper presents the calibration procedure of an imaging system for in-situ measurement of absolute temperatures and temperature gradients during powder bed fusion of metal with laser beam (PBF-LB/M) in the temperature range of 500 K-1500 K. It describes the design of the optical setup to meet specific requirements in this application area as well as the procedure for accounting the various factors influencing the temperature measurement. These include camera-specific effects such as varying spectral sensitivities of the individual pixels of the sensor as well as influences of the exposure time and the exposed sensor area. Furthermore, influences caused by the complex optical path, such as inhomogeneous transmission properties of the galvanometer scanner as well as angle-dependent transmission properties of the f-theta lens were considered. A two-step fitting algorithm based on Planck's law of radiation was applied to best represent the correlation. With the presented procedure the calibrated thermography system provides the ability to measure absolute temperatures under real process conditions with high accuracy.}, language = {en} } @misc{HoefflinSchifflerHartmannetal., author = {H{\"o}fflin, Dennis and Schiffler, Andreas and Hartmann, J{\"u}rgen and Sauer, Christian}, title = {Dual Scan head approach for in-situ defect detection in laser powder bed fusion of metals - Dataset}, doi = {10.5281/zenodo.15727369}, abstract = {This dataset contains thermographic data from a study on in-situ defect detection in the Laser Powder Bed Fusion of Metals (PBF-LB/M) process. The data was collected using a novel experimental setup named Synchronized Path Infrared Thermography (SPIT), which employs a dual scan head configuration. One scan head directs the processing laser, while the second scan head positions the measurement field of an infrared (IR) camera. This setup allows for the precise analysis of the cooling behavior of the material decoupled from the immediate laser-material interaction zone. The experiments were conducted on pre-fabricated stainless steel (EOS StainlessSteel PH1, DIN 14540) samples with embedded, cylindrical subsurface defects of varying diameters. A single layer of metal powder was applied to these samples and then fused by the laser. The dataset includes a series of measurements where process parameters, specifically the volumetric energy density and the laser scanning speed, were systematically varied to assess their influence on defect detection reliability. The provided data consists of raw thermographic recordings, which capture the surface temperature distribution in the heat-affected zone behind the melt pool. These recordings can be used to identify localized areas of elevated temperature caused by the insulating effect of the subsurface defects, which impede heat transfer into the substrate. This dataset is valuable for researchers working on process monitoring, defect detection algorithms, and the validation of thermal simulations in additive manufacturing.}, language = {en} } @misc{SauerSchifflerHoefflinetal., author = {Sauer, Christian and Schiffler, Andreas and H{\"o}fflin, Dennis and Hartmann, J{\"u}rgen}, title = {Temporally Gated Active Thermography for Defect Detection in Laser-Based Powder Bed Fusion of Metals - Dataset}, doi = {10.5281/zenodo.17747278}, abstract = {This HDF5-dataset contains in-situ high-speed infrared thermography data acquired during the Laser-Based Powder Bed Fusion (PBF-LB/M) process. The data was collected using a Synchronized Path Infrared Thermography (SPIT) setup, which employs a dual-scanhead configuration to guide both the processing laser and the thermal camera's field of view. The primary feature of this dataset is the application of a temporally gated acquisition strategy. The infrared camera's integration time (800 µs) was synchronized with a modulated processing laser (500 Hz) to capture thermal data exclusively during the laser-off phases. This method effectively isolates the material's thermal emission from high-intensity laser reflections.}, language = {en} } @incollection{HartmannRingAmmeretal., author = {Hartmann, J{\"u}rgen and Ring, E.F.J. and Ammer, K. and Land, D. and Thomas, R. and Hand, J.W.}, title = {Infrared and Microwave Medical Thermometry in Radiometric Temperature Measurements Part II}, series = {Experimental Methods in the Physical Sciences}, volume = {43}, booktitle = {Experimental Methods in the Physical Sciences}, editor = {Zhang, Z.M. and Tsai, B.K. and Machin, G.}, publisher = {Elsevier Academic Press}, address = {Amsterdam}, isbn = {978-0-12-375091-4}, pages = {393 -- 448}, language = {en} } @incollection{HartmannHollandtStrussetal., author = {Hartmann, J{\"u}rgen and Hollandt, J{\"o}rg and Struß, O. and Gaertner, R. and Ishii, J.}, title = {Industrial Applications of Radiation Thermometry, in Radiometric Temperature Measurements Part II}, series = {Experimental Methods in the Physical Sciences, Volume 43}, volume = {43}, booktitle = {Experimental Methods in the Physical Sciences, Volume 43}, editor = {Zhang, Z.M. and Tsai, B.K. and Machin, Graham}, publisher = {Elsevier Academic Press}, address = {Amsterdam}, isbn = {978-0-12-375091-4}, pages = {1 -- 56}, language = {en} } @article{HartmannEdler, author = {Hartmann, J{\"u}rgen and Edler, F.}, title = {Simultaneous contact and non-contact measurements of the melting temperature of a Ni-C fixed-point cell}, series = {International Journal of Thermophysics}, journal = {International Journal of Thermophysics}, number = {28}, pages = {2002 -- 2008}, language = {en} } @article{HartmannHollandtMeindletal., author = {Hartmann, J{\"u}rgen and Hollandt, J{\"o}rg and Meindl, P. and Taubert, Dieter Richard and Werner, L.}, title = {Traceable Radiometric Calibration of Semiconductor Detectors and their Application for Thermodynamic Temperature Measurement}, series = {MAPAN - Journal of Metrology Society of India}, volume = {25}, journal = {MAPAN - Journal of Metrology Society of India}, number = {3-10}, language = {de} } @article{HartmannEdler, author = {Hartmann, J{\"u}rgen and Edler, F.}, title = {Kombi-Fixpunktzelle zur Erzielung kleinster metrologischer Unsicherheiten}, series = {Sensor Magazin}, journal = {Sensor Magazin}, number = {1}, pages = {20 -- 21}, language = {de} } @article{HartmannKeawprasertAnhaltetal., author = {Hartmann, J{\"u}rgen and Keawprasert, T. and Anhalt, Klaus and Taubert, Dieter Richard}, title = {Monochromator-based Absolute Calibration of Radiation Thermometers}, series = {International Journal of Thermophysics}, journal = {International Journal of Thermophysics}, number = {32}, pages = {1697 -- 1706}, language = {en} } @article{HartmannAnhaltTaubertetal., author = {Hartmann, J{\"u}rgen and Anhalt, Klaus and Taubert, Dieter Richard and Hollandt, J{\"o}rg}, title = {Absolute radiometry for the MeP-K}, series = {International Journal of Thermophysics}, journal = {International Journal of Thermophysics}, number = {32}, pages = {1707 -- 1718}, language = {en} } @article{HartmannHollandtFriedrichetal., author = {Hartmann, J{\"u}rgen and Hollandt, J{\"o}rg and Friedrich, R. and Gutschwager, B. and Taubert, Dieter Richard}, title = {High-Accuracy Radiation Thermometry at the National Metrology Institute of Germany}, series = {High Temperatures - High Pressures}, volume = {35/36}, journal = {High Temperatures - High Pressures}, number = {4}, pages = {379 -- 415}, language = {en} } @article{Hartmann, author = {Hartmann, J{\"u}rgen}, title = {High-temperature measurement techniques for the application in photometry radiometry and thermometry}, series = {Physics Reports}, volume = {469}, journal = {Physics Reports}, pages = {205 -- 269}, language = {en} } @article{HartmannVoelker, author = {Hartmann, J{\"u}rgen and V{\"o}lker, S.}, title = {Thermal management of light sources}, series = {International Journal of Thermophysics}, journal = {International Journal of Thermophysics}, number = {32}, pages = {513 -- 522}, language = {en} } @article{HartmannHollandtGutschwageretal., author = {Hartmann, J{\"u}rgen and Hollandt, J{\"o}rg and Gutschwager, B. and Struss, O.}, title = {Strahlungsthermometrie}, series = {Automatisierungstechnische Praxis}, journal = {Automatisierungstechnische Praxis}, number = {6}, pages = {70 -- 81}, language = {de} } @article{HartmannHollandtAnhalt, author = {Hartmann, J{\"u}rgen and Hollandt, J{\"o}rg and Anhalt, Klaus}, title = {Radiation thermometry capabilities of the PTB up to 3200 K}, series = {MEASURE}, journal = {MEASURE}, number = {3}, pages = {26 -- 34}, language = {en} }