@inproceedings{HartmannManaraStarketal., author = {Hartmann, J{\"u}rgen and Manara, Jochen and Stark, Thomas and Arduini, Mariacarla and Ebert, Hans-Peter and Knopp, Kevin and Shandy, Amir}, title = {Non-contact detection of the adhesive properties of ceramic coatings for high temperature applications using infrared thermography; Transactions}, publisher = {SMiRT-26}, address = {Berlin/Potsdam}, language = {en} } @article{HoefflinSauerSchiffleretal., author = {H{\"o}fflin, Dennis and Sauer, Christian and Schiffler, Andreas and Hartmann, J{\"u}rgen}, title = {Process Monitoring Using Synchronized Path Infrared Thermography in PBF-LB/M}, series = {Sensors}, volume = {22}, journal = {Sensors}, number = {16}, publisher = {MDPI}, doi = {10.3390/s22165943}, pages = {5943}, abstract = {Additive manufacturing processes, particularly Laser-Based Powder Bed Fusion of Metals (PBF-LB/M), enable the development of new application possibilities due to their manufacturing-specific freedom of design. These new fields of application require a high degree of component quality, especially in safety-relevant areas. This is currently ensured primarily via a considerable amount of downstream quality control. Suitable process monitoring systems promise to reduce this effort drastically. This paper introduces a novel monitoring method in order to gain process-specific thermal information during the manufacturing process. The Synchronized Path Infrared Thermography (SPIT) method is based on two synchronized galvanometer scanners allowing high-speed and high-resolution observations of the melt pool in the SWIR range. One scanner is used to steer the laser over the building platform, while the second scanner guides the field of view of an IR camera. With this setup, the melting process is observed at different laser powers, scan speeds and at different locations with respect to the laser position, in order to demonstrate the positioning accuracy of the system and to initially gain thermal process data of the melt pool and the heat-affected zone. Therefore, the SPIT system shows a speed independent overall accuracy of ±2 Pixel within the evaluated range. The system further allows detailed thermal observation of the melt pool and the surrounding heat-affected zone.}, language = {en} } @article{KnoppShandyManaraetal., author = {Knopp, Kevin and Shandy, Amir and Manara, Jochen and Vidi, Stephan and Hartmann, J{\"u}rgen}, title = {Metrologische Apparaturen zur Messung thermophysikalischer Materialeigenschaften bei sehr hohen Temperaturen im EU-Projekt Hi-TRACE}, series = {FHWS Science Journal}, volume = {5}, journal = {FHWS Science Journal}, number = {2}, issn = {2196-6095}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:863-opus-20046}, pages = {83 -- 92}, abstract = {Industriezweige wie die Glas-Industrie, die Kraftwerkstechnik sowie die Luft- und Raumfahrttechnik m{\"u}ssen kontinuierlich neue Methoden entwickeln, sowie bestehende Verfahren optimieren, um in ihren Bereichen wettbewerbsf{\"a}hig zu sein bzw. neue Anforderungen an Umwelt- und Klimaschutz zu erf{\"u}llen. Dies beinhaltet oft die Entwicklung neuer Materialien, die leichter zu fabrizieren sind und sowohl mechanisch als auch thermisch h{\"o}heren Belastungen standhalten. F{\"u}r die genannten Industriezweige sind Prozesse mit hohen Betriebstemperaturen bis zu 3.000 °C kennzeichnend und damit ist die Kenntnis von Materialeigenschaften bei diesen extremen Temperaturen von großer Bedeutung. Auch wenn es bereits einige Messapparaturen f{\"u}r die Bestimmung von thermophysikalischen Materialdaten bei hohen Temperaturen gibt, muss die R{\"u}ckf{\"u}hrung dieser auf die SI Basiseinheiten gew{\"a}hrleistet werden, um die Zuverl{\"a}ssigkeit der gemessenen Daten f{\"u}r die Anforderung der genannten Branchen sicherzustellen. Diese Aufgabe ist das Ziel des EMPIR-(European Metrology Programme for Innovation and Research) Projektes Hi-TRACE [1]. Hi-TRACE zielt darauf ab, Referenzapparaturen und neue Methoden f{\"u}r die Messung von thermophysikalischen Materialeigenschaften, (thermische Diffusivit{\"a}t, spezifische W{\"a}rme, Emissionsgrad und Schmelztemperatur) sowie der Haftung von Schichten {\"u}ber 1.000 °C zu bestimmen.}, language = {de} } @article{OchsWehnertKnoppetal., author = {Ochs, Dennis and Wehnert, Kira-Kristin and Knopp, Kevin and Hartmann, J{\"u}rgen and Versch, Alexander and Schiffler, Andreas}, title = {Untersuchungen zur Temperaturleitf{\"a}higkeit additiv gefertigter Stahlproben in Abh{\"a}ngigkeit der relativen Dichte}, series = {FHWS Science Journal}, volume = {5}, journal = {FHWS Science Journal}, number = {2}, issn = {2196-6095}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:863-opus-19986}, pages = {75 -- 82}, abstract = {Das direkte Metall-Laser-Schmelzen (DMLS) aus der Familie der Additiven Fertigungsverfahren (AM) erm{\"o}glicht die schichtweise Erzeugung komplexer dreidimensionaler Geometrien mit hoher relativer Dichte unter Verwendung von Metallpulver als Ausgangsmaterial [1]. Die Technologie wird zunehmend eingesetzt, um innovative Bauteile material- und gewichtssparend herzustellen oder komplexe Produkte ohne zus{\"a}tzliche Werkzeuge oder Spannvorrichtungen zu fertigen. Dar{\"u}ber hinaus sind Funktionsintegrationen, zum Beispiel Gussformen mit eingepr{\"a}gten K{\"u}hlkan{\"a}len, m{\"o}glich. Da einzelne Metallpulverschichten auf vorhergehende Schichten aufgeschmolzen werden, entstehen w{\"a}hrend der Herstellung des Bauteils komplexe, zeitabh{\"a}ngige Temperaturprofile [2]. Durch den Einsatz hoher Laserintensit{\"a}ten und Scangeschwindigkeiten, bei denen die Belichtungszeit der Laserbestrahlung im Bereich von Millisekunden liegt, werden zudem extrem hohe Aufheiz- und Abk{\"u}hlraten induziert, die zu einzigartigen Mikrostrukturen und Materialeigenschaften f{\"u}hren [3]. Diese extremen Prozessbedingungen k{\"o}nnen sich jedoch auch negativ auf den Fertigungsprozess auswirken. Bei komplexen Bauteilen bleibt die Prozessstabilit{\"a}t und Qualit{\"a}tssicherung Umfragen zufolge weiterhin die wichtigste technologische Barriere f{\"u}r den Einsatz additiv gefertigter Bauteile in hochbelasteten oder sicherheitsrelevanten Bereichen [4]. Daher verspricht der Zusammenhang zwischen Temperaturprofil w{\"a}hrend der Fertigung, relativer Dichte der Bauteile, sowie thermophysikalischer Eigenschaften additiv gefertigter Proben wichtige Erkenntnisse, insbesondere im Hinblick auf eine zerst{\"o}rungsfreie Qualit{\"a}tssicherung, sowie neue Anwendungsm{\"o}glichkeiten.}, language = {de} } @article{HoefflinHartmannRosiliusetal., author = {H{\"o}fflin, Dennis and Hartmann, J{\"u}rgen and Rosilius, Maximilian and Seitz, Philipp and Schiffler, Andreas}, title = {Opto-Thermal Investigation of Additively Manufactured Steel Samples as a Function of the Hatch Distance}, series = {Sensors}, volume = {22}, journal = {Sensors}, number = {1}, publisher = {MDPI}, issn = {1424-8220}, doi = {10.3390/s22010046}, pages = {46}, abstract = {Nowadays, additive manufacturing processes are becoming more and more appealing due to their production-oriented design guidelines, especially with regard to topology optimisation and minimal downstream production depth in contrast to conventional technologies. However, a scientific path in the areas of quality assurance, material and microstructural properties, intrinsic thermal permeability and dependent stress parameters inhibits enthusiasm for the potential degrees of freedom of the direct metal laser melting process (DMLS). Especially in quality assurance, post-processing destructive measuring methods are still predominantly necessary in order to evaluate the components adequately. The overall objective of these investigations is to gain process knowledge make reliable in situ statements about component quality and material properties based on the process parameters used and emission values measured. The knowledge will then be used to develop non-destructive tools for the quality management of additively manufactured components. To assess the effectiveness of the research design in relation to the objectives for further investigations, this pre-study evaluates the dependencies between the process parameters, process emission during manufacturing and resulting thermal diffusivity and the relative density of samples fabricated by DMLS. Therefore, the approach deals with additively built metal samples made on an EOS M290 apparatus with varying hatch distances while simultaneously detecting the process emission. Afterwards, the relative density of the samples is determined optically, and thermal diffusivity is measured using the laser flash method. As a result of this pre-study, all interactions of the within factors are presented. The process variable hatch distance indicates a strong influence on the resulting material properties, as an increase in the hatch distance from 0.11 mm to 1 mm leads to a drop in relative density of 57.4\%. The associated thermal diffusivity also reveals a sharp decrease from 5.3 mm2/s to 1.3 mm2/s with growing hatch distances. The variability of the material properties can also be observed in the measured process emissions. However, as various factors overlap in the thermal radiation signal, no clear assignment is possible within the scope of this work.}, language = {en} }