TY - GEN A1 - Krüger, Hardy T1 - Robotik und Ethik T1 - Robotics and ethics N2 - Das Ziel der Diplomarbeit ist es, die Entwicklung der Robotik aufzuzeigen, ausgehend von der Gegenwart, die Probleme mit den ethischen Grundsätzen herauszustellen und einen möglichen Umgang mit dieser Problematik in der Zukunft vorwegzunehmen. KW - Robotik KW - Künstliche Intelligenz KW - Bewertung KW - Ethik KW - Militär KW - Medizin KW - Pflege KW - Diplom Bibliothekswesen Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:525-opus-1349 ER - TY - CHAP A1 - Kattenbeck, Markus A1 - Brockelmann, Martin A1 - Hammwöhner, Rainer A1 - Jackermeier, Robert A1 - Ludwig, Bernd T1 - Vermessungsdaten: OpenStreetMap : In-situ-Experimente T2 - Informationswissenschaft zwischen virtueller Infrastruktur und materiellen Lebenswelten : Proceedings des 13. Internationalen Symposiums für Informationswissenschaft (ISI 2013), Potsdam, 19. bis 22. März 2013 / hrsg. von Hans-Christoph Hobohm. - Glückstadt: Hülsbusch, 2013. - 502 S. ISBN 978-3-86488-035-3 N2 - Fußgängernavigationssysteme benutzen für die Zielführung idealerweise auffällige Objekte (Landmarken). Die Nachteile bisheriger Verfahren zur Gewinnung dieser Objekte können durch die Erfassung in alltäglichen Navigationssituationen mithilfe einer Smartphone-Applikation umgangen werden. Im Folgenden werden nötige Vorarbeiten zur Umsetzung einer solchen Anwendung beschrieben: Zunächst müssen verschiedene Datenbestände auf ihre Eignung hin geprüft werden. Anschließend müssen diese Daten integriert und deren Heterogenität auf verschiedenen Ebenen überwunden werden. KW - Landmarke KW - Navigationssystem KW - Software KW - Anwendung KW - mobile Telekommunikation Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:525-4241 ER - TY - CHAP A1 - Vielhaber, Johannes ED - Kalleja, Hartmut T1 - Verstärken von Stahlbetonbauteilen mit geklebten Kohlefaserlamellen T2 - Spannweite der Gedanken : Festschrift zum 60. Geburtstag von Professor Dr.-Ing. Manfred Specht KW - Verstärkungswerkstoff KW - Faserverstärkung KW - Faserverbundwerkstoff KW - Kohlenstofffaserverstärkter Kohlenstoffwerkstoff KW - Stahlbeton Y1 - 1998 SN - 978-3-642-71964-6 U6 - https://doi.org/10.1007/978-3-642-71963-9_15 SP - 289 EP - 304 PB - Springer CY - Berlin ER - TY - GEN A1 - Landwehrs, Klaus T1 - Schutz und Instandsetzung von Betonbauteilen : Stand der Technik und der Regelwerke KW - Beton KW - Bauteil KW - Richtlinie Y1 - 1997 N1 - 2. Potsdamer Bauseminar - Bauwerkserhaltung : Potsdam, 20/21.11.1997 ER - TY - CHAP A1 - Kahlow, Andreas ED - Fachhochschule Potsdam, ED - Stiftung Preußische Schlösser und Gärten Berlin-Brandenburg, T1 - Von Belidor bis Gilly : Ingenieure zwischen Theorie und Praxis T2 - Vom Schönen und Nützlichen : David Gilly (1748-1808) KW - Gilly, David KW - Belidor, Bernard Forest de KW - Ingenieurleistung KW - Springbrunnen KW - Wasserbau KW - Kunst KW - Kanalbau Y1 - 1998 SP - 27 EP - 30 CY - Potsdam ER - TY - CHAP A1 - Kahlow, Andreas ED - Fachhochschule Potsdam, ED - Stiftung Preußische Schlösser und Gärten Berlin-Brandenburg, T1 - Industrie und Natur T2 - Vom Schönen und Nützlichen : David Gilly (1748-1808) KW - Eisenbrücke KW - Eisenarchitektur KW - Industrieanlage KW - Eisengießerei Y1 - 1998 SP - 46 EP - 47 CY - Potsdam ER - TY - JOUR T1 - Was bewegt Jörg Freitag? JF - Restauro: Zeitschrift für Restaurierung, Denkmalpflege und Museumstechnik N2 - Portät KW - Metall KW - Restaurierung KW - Ausbildung KW - Fachhochschule Potsdam Y1 - 2014 SN - 0933-4017 IS - 6 SP - 66 PB - Callwey CY - München ER - TY - CHAP A1 - Müller, Ulf T1 - Untersuchungen am historischen Eisenbaustoff Schweißstahl T2 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen KW - Baustoff KW - Eisen KW - Schweißstahl KW - Technologie KW - Tradition KW - Baukonstruktion Y1 - 1994 SN - 0509-9773 N1 - IBAUSIL : Weimar, 22. - 24. September 1994 / 12. Internationale Baustofftagung. Hochschule für Architektur und Bauwesen Weimar VL - 40 IS - 5/7 SP - 84 EP - 102 PB - HAB CY - Weimar ER - TY - GEN A1 - Wesner, Lilly T1 - Die Karteikarten des Archivs der AEG-Turbinenfabrik 1914 - 1918 : Die Erschließung des Bestandes und ihre Bedeutung für die Forschung T1 - The index cards of archives of the AEG Turbinenfabrik 1914 - 1918 N2 - Das Ziel der Arbeit war die Analyse der inhaltlichen sowie formalen Aspekte des Karteikartenbestandes der Turbinenfabrik mit Hilfe einer repräsentativen Stichprobenziehung. Daraus sollte geschlussfolgert werden, inwieweit der Bestand für die Forschung von Belang ist. Nachdem nachgewiesen werden konnte, dass die Karteikarten nicht vollständig archiviert wurden, wurde auch das Vorhaben einer repräsentativen Auswahl hinfällig. Die Lösung zur Problematik der Repräsentativität fand sich in der Anwendung der deskriptiven Stichprobe, die eine Beschreibung der Stichprobe, aber nicht ihre Bezugnahme auf die Gesamtheit umfasste. Die Auswertung hat gezeigt, dass sich mit dieser Stichprobe zutreffende Tendenzen in den Belegschaftsveränderungen im Ersten Weltkrieg aufzeigen lassen, wie der hohe Frauenanteil oder die umfangreichen Heereseinziehungen beim männlichen Personal in der Turbinenfabrik. In diesen Punkten könnten sich Übereinstimmungen zwischen der Stichprobe und der Grundgesamtheit finden lassen. KW - Betrieb KW - Maschinenbau KW - Geschichte KW - Archiv KW - Archivalien KW - Kartei KW - Mitarbeiter KW - Katalogisierung KW - Inhaltsanalyse KW - Bewertung KW - Diplom Archiv Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:525-opus-1920 ER - TY - RPRT A1 - Kahlow, Andreas T1 - Interdisziplinär am Denkmal Lübecker Speicher in Demmin BT - Dokumentation, Schadensanalyse und Nutzungskonzepte des Lübecker Speichers N2 - INTERFLEX-PROJEKT Projektwoche in Demmin 13.07. - 20.07.2014 Architektur & Städtebau, Bauingenieurwesen, Restaurierung KW - Lübecker Speicher Demmin KW - Baudenkmal KW - Interdisziplinarität KW - Demmin KW - Speicher KW - Lübeck KW - Interdisziplinär KW - Denkmal KW - Schadensanalyse KW - Bauaufnahme KW - Befragung KW - Nutzung KW - Gestaltung KW - Altstadt KW - Projekt Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:525-13678 SN - 978-3-934329-75-1 ER - TY - RPRT A1 - Kahlow, Andreas A1 - Kurrer, Karl-Eugen T1 - Zeichnung, Graphik, Bild in Technikwissenschaften und Architektur T2 - Bautechnik : Zeitschrift für den gesamten Ingenieurbau N2 - Bericht über das 2. Kolloquium des Arbeitskreises "Geschichte der Technikwissenschaften" der Gesellschaft für Technikgeschichte an der Fachhochschule Potsdam vom 4.- 5. 12.1993. KW - Ingenieurwissenschaften KW - Architektur KW - Wahrnehmung Y1 - 1994 SN - 0932-8351 VL - 71 IS - 5 SP - 303 EP - 304 PB - Ernst u. Sohn CY - Berlin ER - TY - JOUR A1 - Kahlow, Andreas A1 - Brown, Allison T1 - Section, strain and stress BT - the anatomy of construction from Leonardo to modern times JF - ICON : the journal of the International Committee for the History of Technology KW - Geschichte KW - Konstruktionslehre Y1 - 1998 SN - 1361-8113 VL - 4 SP - 157 EP - 180 PB - Cass CY - London ER - TY - JOUR A1 - Kahlow, Andreas T1 - Leonard Euler und die Projekte einer weitgespannten Newa-Brücke in St. Petersburg JF - Dresdener Beiträge zur Geschichte der Technikwissenschaften KW - Brückenbau KW - Sankt Petersburg KW - Euler, Leonhard KW - Newa KW - Elastizitätstheorie KW - José de Ribas KW - Bauweise Y1 - 1993 IS - 21 SP - 37 EP - 45 PB - Technische Universität Dresden CY - Dresden ER - TY - CHAP A1 - Kahlow, Andreas A1 - Kurrer, Karl-Eugen T1 - Arch and vault from 1800 to 1864 T2 - Arch bridges : history, analysis, assessment, maintenance and repair KW - Brückenbau KW - Elastizitätstheorie KW - Bogenbrücke KW - Geschichte Y1 - 1998 SN - 90-5809-012-4 N1 - International Arch Bridge Conference 2, Venice, Italy, 6 - 9 October 1998 SP - 37 EP - 42 PB - Balkema CY - Rotterdam ER - TY - JOUR A1 - Nivala, Jaime A1 - van Afferden, Manfred A1 - Hasselbach, Ralf A1 - Langergraber, Guenter A1 - Molle, Pascal A1 - Rustige, Heribert A1 - Nowak, Jens T1 - The new German standard on constructed wetland systems for treatment of domestic and municipal wastewater JF - Water Science and Technology N2 - The German Association for Water, Wastewater and Waste e.V. (DWA) has published a new standard for the dimensioning, construction, and operation of constructed wetlands for treatment of domestic and municipal wastewater. The changes to the standard are based on a wide range of experience gained in recent years in Germany and Europe. For the first time ever, the standard has been officially translated and published in English. This paper summarizes the new standard for secondary treatment of domestic wastewater with classical one-stage unsaturated vertical flow (VF) wetlands, VF wetlands with lava sand for treatment of wastewater from combined sewer systems, and actively aerated VF and horizontal flow (HF) flow wetlands. Two-stage unsaturated VF wetlands treating raw wastewater (French VF wetlands), are also included in the new standard. HF wetlands are no longer described in the standard for secondary treatment of domestic wastewater. This does not exclude their application. Existing HF wetland systems in Germany may continue to be operated so long as effluent parameters are met and proper operations and maintenance is ensured. This paper gives an overview of the new design standard, including key information on wastewater type and loading, as well as primary attributes of each wetland design. KW - Feuchtgebiet KW - Abwasserreinigung KW - Deutschland KW - Frankreich Y1 - 2018 U6 - https://doi.org/10.2166/wst.2018.530 SN - 0273-1223 VL - 78 IS - 11 SP - 2414 EP - 2426 PB - IWA Publishing CY - London ER - TY - CHAP A1 - Meier, Sebastian T1 - Enhancing Location Recommendation Through Proximity Indicators, Areal Descriptors, and Similarity Clusters T2 - Progress in Location-Based Services 2016 N2 - Location recommendation (LR) or rather location-based recommender systems (LBRS) are an integral part of modern location-based services (LBS). Most LR algorithms only focus on location-specific attributes when calculating recommendations, while completely ignoring the urban structure surrounding the locations. (In this paper we refer to a geographic coordinate (latitude and longitude) as position. Locations and places in contrast refer to physical entities e.g. a restaurant, a bus stop or a lake). This paper demonstrates how the urban structure can be modelled in LR calculations by using data from OpenStreetMap (OSM) and the location data itself. Based on these datasets, we present two approaches to extend the LR process by (1) including the urban structure in direct proximity of the location (Proximity Indicators and Areal Descriptors) and by (2) not only looking for individual locations but location clusters (Similarity Clusters). Thereby we acknowledge the complexity of a location, which can not be perceived as a detached entity. A location is part of a given urban structure and we need to include the parameters of this structure in our algorithms. A prototypical implementation compares locations from four major German cities: Berlin, Hamburg, Munich and Cologne and thereby highlights the applicability of the underlying data structures derived from OSM and the location data itself. We conclude by outlining the potential of the presented approaches in the context of LR as well as their relevancy for urban planning and neighboring disciplines. KW - Empfehlungssystem KW - Standortbezogener Dienst KW - Datenerhebung KW - Freiwilligkeit KW - OpenStreetMap Y1 - 2016 SN - 978-3-319-47289-8 U6 - https://doi.org/10.1007/978-3-319-47289-8_14 SN - 1863-2351 SP - 273 EP - 291 PB - Springer CY - Cham ER - TY - JOUR A1 - Pak, Daniel A1 - Seidl, Günter T1 - Eine kurze Geschichte der Rahmenbrücken in Deutschland BT - Vom stählernen Rahmen zur integralen Verbundbrücke JF - Stahlbau N2 - Stählerne Rahmenbrücken kommen in Deutschland bereits seit Anfang des letzten Jahrhunderts zum Einsatz. Wurden die ersten stählernen Rahmen noch genietet, konnten Anfang der 1940er-Jahre mit geschweißten, vollwandigen Zweigelenkrahmenbrücken bereits Spannweiten bis 50 m realisiert werden. Mit ihrer Schlankheit kamen sie u. a. dann zum Einsatz, wenn gestiegene Anforderungen an die Verkehrslasten einen Ersatzneubau erforderten. Waren die Lagerungsbedingungen von den zunächst errichteten Zweigelenkrahmenbrücken noch klar definiert, so erforderte der Bau von Brücken mit integralen Widerlagern die Entwicklung neuer Ansätze zur Berücksichtigung der Boden-Bauwerk-Interaktion. Heute sind Rahmenbrücken wegen der großen realisierbaren Spannweite, welche den Mittelpfeiler bei Autobahnüberführungen überflüssig macht, sowie ihrer geringen Lebenszykluskosten zu einer wirtschaftlichen Alternative geworden. Die hier vorgestellte kurze Geschichte der Rahmenbrücken erhebt keinen Anspruch auf Vollständigkeit, soll jedoch an ausgewählten Beispielen die Entwicklung in den letzten 100 Jahren anschaulich nachzeichnen. KW - Rahmenbrücke KW - Wiederlager Y1 - 2020 U6 - https://doi.org/10.1002/stab.201900110 SN - 1437-1049 VL - 89 IS - 3 SP - 240 EP - 249 PB - Wiley-Blackwell CY - Weinheim ER - TY - JOUR A1 - Seidl, Günter A1 - Mariacher, Wolfgang A1 - Schmidt, Jürgen A1 - Daßler, Mathias T1 - Brücke über die Salzach bei Kaprun JF - Stahlbau N2 - Im Zuge der Hochwasserschutzmaßnahmen entlang der Salzach wird zur Überführung der Straße von Zell am See nach Kaprun in Österreich eine neue Brücke mit größerer Stützweite notwendig. Der Ersatzneubau der Brücke über die Salzach bei Mayereinöd ist ein Trogbauwerk in Verbundbauweise, dessen Form funktional entworfen wurde. In Querrichtung werden vorgefertigte π-Platten mit externer Bewehrung gewählt, um eine große Schlankheit und eine schnelle Bauzeit zu ermöglichen. Die externe Bewehrung wird feuerverzinkt ausgeführt. KW - Brücke KW - Trogbrücke KW - Verbunddübel KW - Verbundbrücke KW - Fahrbahnplatte KW - Feuerverzinken Y1 - 2019 U6 - https://doi.org/10.1002/stab.201900021 SN - 1437-1049 VL - 88 IS - 5 SP - 488 EP - 498 PB - Wiley-Blackwell CY - Weinheim ER - TY - CHAP A1 - Seidl, Günter A1 - Schmitt, Victor A1 - Lorenc, Wojciech T1 - Brücken mit Verbunddübelleisten BT - Entwurf, Bemessung und Ausführungsbeispiele T2 - Tagungsband 31. Dresdner Brückenbausymposium KW - Brücke KW - Verbundbrücke KW - Verbunddübel KW - Stahlbetonbrücke Y1 - 2022 UR - https://tu-dresden.de/bu/bauingenieurwesen/imb/das-institut/veranstaltungen/DBBS/30.-31.-dbbs SN - 978-3-86780-709-8 SN - 1613-1169 SP - 27 EP - 40 CY - Dresden ER - TY - CHAP A1 - Zimmermann, Raphael A1 - Wettach, Reto T1 - First Step into Visceral Interaction with Autonomous Vehicles T2 - AutomotiveUI '17: Proceedings of the 9th International Conference on Automotive User Interfaces and Interactive Vehicular Applications N2 - Autonomous vehicles (AVs) seem to be the next big step into the future of mobility solutions. Various research institutions in the automobile industry and academic sectors are striving to come out with the most futuristic concept. This paper focuses on the interaction between AVs and pedestrians. Furthermore, the paper aims to explore if complex communication needs can be signaled to pedestrians through motion behavior of the vehicle. In order to learn how other road users feel surrounded by self-driving cars, participants were confronted with different drivability of a self-programmed vehicle during our evaluation. As the results show, the vehicle's motion behavior is able to evoke certain emotions, which in turn lead to rational decisions within the participants. This can be seen as a form of mutual communication. KW - Autonomes Fahrzeug KW - Mobilität 4.0 KW - Fußgänger Y1 - 2017 SN - 978-1-4503-5150-8 U6 - https://doi.org/10.1145/3122986.3122988 SP - 58 EP - 64 PB - Association for Computing Machinery CY - New York ER - TY - JOUR A1 - Lorenz, Werner A1 - Kaiser, Christiane T1 - Strukturfindungsprozesse der Spätrenaissance BT - Planung und Bau der Fleischbrücke Nürnberg (1596–1598) JF - Bautechnik : Zeitschrift für den gesamten Ingenieurbau N2 - Die Ende des 16. Jahrhunderts errichtete Nürnberger Fleischbrücke gilt als die bedeutendste Brücke der Spätrenaissance in Deutschland. Nach der Zerstörung des zweibogigen Vorgängerbaus durch ein Hochwasser im Frühjahr 1595 sollte die neue Brücke ohne Mittelpfeiler errichtet werden; wegen der angrenzenden Bebauung durfte sie jedoch nur sehr flach gewölbt sein, zudem stand zur Aufnahme des Bogenschubs nur ein wenig verlässlicher Baugrund zur Verfügung. Als Antwort auf diese Herausforderungen entwickelten die Nürnberger Baumeister ein Ausnahme-Bauwerk, dessen äußerst flacher Bogen die Spannweiten und Pfeilverhältnisse sämtlicher vergleichbarer Bauten im deutschsprachigen Raum weit übertraf, und das sich zudem durch ungewöhnliche Lösungen für den Steinverband und die Pfahlgründung auszeichnete. Im Sommer 1598 konnte es in der Rekordzeit von nur neun Wochen errichtet werden. Entworfen im Zeichen einer noch “unwissenschaftlichen” Bautechnik, hat sich die Fleischbrücke über die Jahrhunderte als Lehrstück robusten und nachhaltigen Konstruierens erwiesen. Planung, konstruktive Durchbildung und Realisierung waren Ausdruck und Resultat einer hoch entwickelten reichsstädtischen Baukultur, Infrastruktur und Logistik. Ein Brückenwettbewerb wurde ausgelobt, in iterativer Optimierung allmählich die endgültige Lösung entwickelt. Ein umfangreicher Fundus bauzeitlicher Archivalien lässt die Strukturfindungsprozesse noch heute recht genau nachvollziehen. Entwurf und Konstruktion der Fleischbrücke gehören zu den bestdokumentierten Planungsprozessen eines Brückenbauwerks der frühen Neuzeit. Der Beitrag geht dem nach, was von den ersten Überlegungen bis zur Vollendung dieses Wahrzeichens der Ingenieurbaukunst gedacht, geplant, verworfen und letztlich realisiert wurde. KW - Renaissance KW - Brückenbau KW - Nürnberg KW - Ingenieurbau Y1 - 2012 U6 - https://doi.org/10.1002/bate.201201537 SN - 1437-0999 VL - 89 IS - 2 SP - 119 EP - 127 PB - Wiley CY - Weinheim ER - TY - JOUR A1 - Wagner, Ulrike A1 - Reuschel, Elke A1 - Schleicher, Wolfram T1 - Das Schwingungsverhalten der Fußgängerbrücke am Stern-Center in Potsdam JF - Stahlbau N2 - Die Fußgängerbrücke am Stern-Center in Potsdam wurde vor sieben Jahren in Betrieb genommen. Seitdem werden sowohl von der Brückenverwaltung als auch von den Nutzern deutlich spürbare Schwingungen beim überqueren der Brücke festgestellt, die Anlaß zu Beunruhigungen geben. Ziel der durchgeführten Untersuchungen war es, das Schwingungsverhalten und die Schwingungsursachen der Schrägseilbrücke anhand von Messungen zu identifizieren und ein geeignetes FE-Rechenmodell zu entwickeln, das die dynamischen Wirkungen hinreichend genau erfaßt. KW - Schwingungsverhalten KW - Fußgängerbrücke KW - Potsdam KW - Schrägseilbrücke KW - Frequenzanalyse Y1 - 2006 U6 - https://doi.org/10.1002/stab.200590062 SN - 1437-1049 VL - 74 IS - 5 SP - 331 EP - 338 PB - Wiley-Blackwell CY - Berlin ER - TY - CHAP A1 - Kahlow, Andreas T1 - Johann August Röbling (1806-1869) — Early Projects in Context T2 - John A. Roebling : A Bicentennial Celebration of His Birth 1806-2006 N2 - Roebling became acquainted with Navier's theory at the Berlin Bauakademie in 1824/25. During his road planning work in Westphalia, he developed several suspension bridge projects in 1828. Roebling's travels along the Rhein and Ruhr in the winter of 1828 were connected with these projects. Roebling supplemented his notes on Dietlein's bridge-building lectures at the Berlin Bauakademie with excerpts from newer literature on suspension bridges. Under the title "Remarks on Bridge Construction" he discussed the results of his studies. Four known bridge projects can be distinguished. Two are only elaborated as an idea, in one case the project is only known by official letters. Only in the case of the Freienohl Bridge is there an exact description of the project. None of them have been brought to realization. Security considerations of the Berlin Oberbaudeputation probably led to the decision not to execute Roebling's Finnentrop project. This decision ought to be understood within the context of a bridge collapse in Nienburg /Saale in December 1825. When Roebling immigrated to the United States, he used his knowledge in construction methods and experiences with an experimental approach. For this reason, it is interesting to compare the early German projects with his first American bridges. While Roebling's first canal aqueducts combined suspension bridges with trusses, the Niagara Bridge marks a radical step forward to another dimension and to a new approach that emphasized thinking in terms of "systems". Interestingly, he also consistently maintained his construction principle for attaining stability by using rigid, wrapped main cables, inclined stays and wooden trusswork. Although he later used wrought iron profiles, he continued to use wooden constructions in his basic plans for a long time. There is no evidence that he made any contribution to the theories of trusses in a manner comparable with Whipple, Culmann, Gerber or others. Roebling's special talent lay in his constructive gifts. KW - Projektmanagement KW - Infrastrukturplanung KW - Brücke KW - Methodisches Konstruieren KW - Hängebrücke KW - Kabel KW - Querträger KW - USA KW - Deutschland Y1 - 2006 SN - 9780784408995 U6 - https://doi.org/10.1061/40899(244)4 ER - TY - JOUR A1 - Linke, Gunter A1 - Börner, Tommy A1 - Rug, Wolfgang T1 - Untersuchungen zum Verschiebungsmodul verzahnter Balken JF - Bauingenieur N2 - Vor der industriellen Produktion von Stahlträgern und Brettschichtholz boten Zahnbalken eine Möglichkeit große Auflagerabstände im Hoch- und Brückenbau zu überspannen. Verzahnte Balken sind aus heutiger Sicht als nachgiebig zusammengesetzte Biegeträger zu betrachten. Dabei wirken die handwerklich hergestellten Zahnverbindungen in gleicher Weise wie zum Beispiel Dübel besonderer Bauart. Der zur statischen Nachweisführung benötigte Verschiebungsmodul ist in der aktuell gültigen Holzbau-Bemessungsnorm DIN EN 1995–1–1:2010 nicht ausgewiesen. Somit ist es zurzeit nur durch eine versuchstechnische Ermittlung des Verschiebungsmoduls für die jeweilige Zahngeometrie möglich, statische Nachweise durchzuführen. T2 - Experimental studies of slip module for composite beams KW - Balken KW - Verzahnung KW - Biegeträger Y1 - 2022 U6 - https://doi.org/10.37544/0005-6650-2022-06-46 SN - 0005-6650 VL - 97 IS - 6 SP - 186 EP - 191 PB - VDI Fachmedien CY - Düsseldorf ER - TY - JOUR A1 - Lorenc, Wojciech A1 - Kurz, Wolfgang A1 - Seidl, Günter T1 - Hybrid steel-concrete sections for bridges : definition and basis for design JF - Engineering Structures N2 - This paper introduces (both formally and technically) a new concept: a hybrid steel–concrete cross section. The definition is based on the shear force transmission mechanism and it assumes the existence of a new type of shear connections, i.e. composite dowels. The hybrid cross-section is a generalization of composite steel-and-reinforced concrete cross sections and it is defined by a new way of dimensioning for vertical shear. The hybrid cross section concept is based on a specific approach to the lever arm of internal forces and an assumption that the local shear transfer mechanism of composite dowels is different than in the case of classic welded studs. The concept makes it possible to show by design calculations that the shear force is transferred through jointly the concrete part and the steel part. It is worth emphasizing that the proposed concept is a response to the new opportunities provided to engineers by composite dowels and to the fact that the bridge structures designed nowadays are different from the ones designed previously. The concept enables the design of completely new types of composite steel–concrete beams. The presented theoretical analyses verified by means of FEM show how the change of the shear connection level influences the division of the shear force in the cross section. This is included in the design concept through the internal lever arm of the hybrid section. The proposed concept has been shown to be internally consistent and complete. KW - Verbundbrücke KW - Stahlbetonbrücke KW - Verbunddübel Y1 - 2022 U6 - https://doi.org/10.1016/j.engstruct.2022.114902 SN - 1873-7323 VL - 270 PB - Elsevier CY - Amsterdam ER - TY - CHAP A1 - Zanon, Riccardo A1 - Rademacher, Dennis A1 - Seidl, Günter A1 - Pak, Daniel T1 - Integral VFT-RS composite bridges : efficient standard highway overpasses T2 - IABSE Symposium Prague 2022 : Challenges for Existing and Oncoming Structures N2 - Starting from Germany, the VFT® bridge girder technology (prefabricated composite beam) has spread in several European countries in the last decades as further development of the standard steel-concrete composite solution. Its configuration fits perfectly to integral frame bridges built over existing infrastructure with the scope to minimize the traffic disturbance. In this paper a further development with the focus on cost efficiency in span ranges of 40-55 m is proposed: the VFT-RS technology. The change consists in using standard rolled sections by adapting them into the integral frame bridge configuration, further enhancing the structural efficiency with the benefits of high- steel strength. The constructive details to achieve the polygonal form have been studied to allow easy fabrication and a maximal clearance height over highway traffic lanes. The VFT-RS solution is conceived as the economic option of standard highway overpasses, with the aim of an overall construction cost reduction of 5%. KW - Verbundbrücke KW - Überführung KW - Autobahnbrücke Y1 - 2022 SN - 978-3-85748-183-3 U6 - https://doi.org/10.2749/prague.2022.1013 SP - 1013 EP - 1020 CY - Zürich ER - TY - JOUR A1 - Lorenc, Wojciech A1 - Seidl, Günter A1 - Berthellemy, Jacques T1 - The evolution of the shape of composite dowels JF - Studia geotechnica et mechanica N2 - Composite dowels have opened new possibilities for engineers designing composite structures. The fundamental and most important characteristic of composite dowels is the shape of the cutting line. It is important to understand why only one particular shape of the cutting line is used in bridge engineering, while so many different shapes have been investigated by many researchers. The essential part of the process of developing composite dowels – the development of the shape of the cutting line – is presented in this paper. The influence of the steel web thickness is presented, and technological problems of steel fabrication are highlighted. The role of empirical experience from the first bridges, push-out tests, and finite element simulations is presented. Assumptions for numerical procedures are given. The distinction between the steel failure and concrete failure modes is introduced for composite dowels. The paper presents how the concept of “shape” was divided into “shape,” “ratio,” and finally “size,” and how, because of the fatigue problems in bridges, all the three factors have emerged to result in the form of shapes that can satisfy the requirements for bridges. Research leading to the invention of the first version of the clothoidal shape is presented. KW - Verbunddübel KW - Verbundbrücke KW - Materialermüdung KW - Finite-Elemente-Methode Y1 - 2022 U6 - https://doi.org/10.2478/sgem-2022-0021 SN - 2083-831X VL - 44 IS - 4 SP - 296 EP - 316 CY - Wrocław ER - TY - JOUR A1 - Linke, Gunter A1 - Lübken, Vera A1 - Pfriem, Alexander A1 - Rug, Wolfgang A1 - Weiß, Markus T1 - Bestand statt Austausch - Untersuchungen zum Trag- und Verformungsverhalten von historischen Brettschichtholzbauteilen JF - Bauingenieur N2 - Die Erfindung des Brettschichtholzes durch Otto Hetzer kann zu Recht als Geburtsstunde des Ingenieurholzbaus betrachtet werden. Die Herstellung zusammengesetzter und mittels Leim verbundener Bretter ermöglichte die Herstellung von weitgespannten Holztragwerken bis zu Spannweiten von 40 m. Dadurch wurde der Holzbau wieder konkurrenzfähig gegenüber dem Stahl- und Massivbau. Auch heutzutage existieren noch zahlreiche originalgetreu erhaltene Konstruktionen in Hetzer-Bauweise. Im Sanierungsfall ist eine Einschätzung der Tragfähigkeit erforderlich. Erkenntnisse hierzu können durch Versuche an historischen Bauteilen und Konstruktionen gewonnen werden. Der vorliegende Beitrag beschreibt derartige Untersuchungen zum Trag- und Verformungsverhalten am Beispiel von historischen Brettschichtholzträgern von 1912, die bis 2017 Teil der Dachkonstruktion eines Schulgebäudes waren. Die Ergebnisse zeigen, dass die historischen Brettschichtholzbauteile auch nach mehr als 100 Jahren Standzeit mit modernem Brettschichtholz vergleichbar sind. KW - Material KW - Brettschichtholz KW - Hetzer, Otto Y1 - 2023 U6 - https://doi.org/10.37544/0005-6650-2023-01-02-29 SN - 0005-6650 VL - 98 IS - 1-2 SP - 1 EP - 9 PB - VDI Fachmedien CY - Düsseldorf ER - TY - JOUR A1 - Zanon, Riccardo A1 - Rademacher, Dennis A1 - Seidl, Günter A1 - Pak, Daniel T1 - Integral bridge with RS-Overpass technology : step into the future of standard highway overpasses JF - ce/papers N2 - Starting from Germany, the VFT bridge girder technology (prefabricated composite beam) has spread in several European countries in the last decades as further development of the standard steel-concrete composite solution. Its configuration fits perfectly to integral frame bridges built over existing infrastructure with the scope to minimize the traffic disturbance. In this paper a further development with the focus on cost efficiency in span ranges of 40-55 m is proposed: the RS-Overpass technology. The change consists in using standard rolled sections by adapting them into the integral frame bridge configuration, further enhancing the structural efficiency with the benefits of high-steel strength. The constructive details to achieve the polygonal form have been studied to allow easy fabrication and a maximal clearance height over highway traffic lanes. The RS-Overpass solution is conceived as the economic option of standard highway overpasses, with the aim of a overall construction cost reduction of 5%. The possibility of weathering steel or hot-dip galvanization create the unique offer for a maintenance-free solution. KW - Verwitterungsstahl KW - Verbundbrücke KW - Autobahnbrücke KW - Stahlbrücke Y1 - 2023 U6 - https://doi.org/10.1002/cepa.1928 SN - 2509-7075 VL - 6 IS - 1 SP - 459 EP - 470 PB - Ernst & Sohn CY - Berlin ER - TY - JOUR A1 - Lorenc, Wojciech A1 - Seidl, Günter T1 - Composite dowels for bridges : trends and challenges for new european design rules JF - ce/papers N2 - The introduction of composite dowels (CDs) in Europe at the beginning of the last decade led to the creation of new forms of composite bridges in which a T-profile is used instead of an I-beam. Both the construction and design methods are new [4]. Experiences from the construction of new bridges and discussion between the authors lead to new significant conclusions, which should be included in the new European approval (CEN-TS). The problem of design formulas for concrete dowels is presented. KW - Scherverbindung KW - Verbunddübel KW - Verbundbrücke KW - Hochbau Y1 - 2023 U6 - https://doi.org/10.1002/cepa.1897 SN - 2509-7075 VL - 6 IS - 1 SP - 118 EP - 129 PB - Ernst & Sohn CY - Berlin ER - TY - JOUR A1 - Zanon, Riccardo A1 - Seidl, Günter A1 - Rademacher, Dennis T1 - New ideas for steel-concrete composite bridges overpassing highways : VFT-RS technology JF - ce/papers N2 - Roads overpassing highways or speedways are rather a common case, as such bridges occur in average every 2 km of highways in densely populated areas. Due to the high number and similar boundary conditions, the design and realization tends to be standardized and repetitive. The total length ranges mostly between 40 and 55 m, whereas the construction height is a limiting factor since minimumclearance heights must be guaranteed both for safety as well as for driving comfort. Due to these reasons, highway overpasses have been a field of application where steel-framed composite decks have proventheir efficiency for this task. Starting from Germany, the VFT technology (prefabricated composite beam) has spread in several European countries in the last decades as further development of the standard steel-concrete composite solution. Its configuration fits perfectly to integral frame bridges built over existing infrastructure with the scope to minimize the traffic disturbance. In this paper a further step is proposed: the VFT-RS technology. The change consists in using standard rolled sections by adapting them into the integral frame bridge configuration, further enhancing the structural efficiency with the benefits of high-steel strength. The possibility of weathering steel or hot-dip galvanization create the unique offer of a maintenance-free solution. KW - Verbundbrücke KW - Autobahnbrücke KW - Stahlbrücke Y1 - 2021 U6 - https://doi.org/10.1002/cepa.1292 SN - 2509-7075 VL - 4 IS - 2-4 SP - 269 EP - 278 PB - Ernst & Sohn CY - Berlin ER - TY - CHAP A1 - Walther, Andrei A1 - Röder, Jörg T1 - Practice-oriented building analysis as a subject in the course of civil engineering T2 - e-Journal of nondestructive testing N2 - At the University of Applied Sciences Potsdam, students are introduced to working with built structures in the field of practical building analysis in the master's degree in civil engineering. The basis for the existing analysis is the geometry, materials used and the structure. New structural calculations are required for modifications or extensions. The students are taught which non-destructive testing methods can be used to determine the material properties of the building fabric. In addition, it is presented how the teaching is structured and using examples that show that teaching can be designed to be very practice-relevant. KW - Zerstörungsfreie Werkstoffprüfung KW - Gebäudeanalyse KW - Ultraschallmesstechnik Y1 - 2022 U6 - https://doi.org/10.58286/27196 SN - 1435-4934 VL - 27 IS - 9 SP - 1 EP - 7 PB - NDT.net CY - Kirchwald ER - TY - JOUR A1 - Schmitt, Victor A1 - Braun, Anton A1 - Lechner, Thomas A1 - Seidl, Günter T1 - Entwicklung von Bauweisen im Brückenbau JF - Brückenbau : Construction & Engineering N2 - In vielen Ländern mit hochbelasteten Verkehrsinfrastrukturen ist Bauen mit vorgefertigten Modulen anerkannter Stand der Technik und wird stetig eingesetzt. In der Regel sind es Überbauten mit einem einzelligen Stahlbetonhohlkasten, die, in Segmente aufgeteiltm vor Ort meist im Freivorbau zusammengefügt und mit externen Spanngliedern zusammengespannt werden. Modulbauweisen im Verbundbau sind die Ausnahme, bieten aber gegenüber dem Spannbeton in der Herstellung, beim Transport und der Montage erhebliche Vorteile, da die Fahrbahnsegmente auf die Längsträger einfach aufgelegt werden können. Mit der vorstellten VSM-Bauweise können robuste Überbauten vin Ein- und Mehrfeldbauwerken in kürzester Bauzeit mit geringster Verkehrbehinderung wirtschaftlich realisiert werden. KW - Bauweise KW - Brückenbau KW - Deutschland Y1 - 2019 UR - https://issuu.com/verlagsgruppewiederspahn/docs/brueckenbau_2019_1-2 SN - 1867-643X IS - 1-2 SP - 6 EP - 15 PB - Wiederspahn CY - Wiesbaden ER - TY - JOUR A1 - Seidl, Günter A1 - Rademacher, Dennis A1 - Zanon, Riccardo A1 - Yu, Chao T1 - Weitgespannte Rahmenbrücken mit Walzträgern in Verbundbauweise JF - Brückenbau : Construction & Engineering N2 - Rahmenbrücken in Verbundbauweise werden mit Spannweiten von über 60 m ausgeführt. Bisher wurde der Spannweitenbereich über 40 m aus VFT-Trägern mit geschweißten Trägern realisiert. Walzträger der Güte S460M sind in diesem Spannweitenbereich eine gestalterisch gute Alternative, bergen ein großes Einsparpotenzial im Konstruktionsstahl und bieten eine hohe Flexibilität in Hinblick auf die Schlankheit. Durch die großen Steg- und Flanschdicken sind dei VFT-Träger sehr robust. Der Aufsatz beschreibt die Konstruktion und beleuchtet wirtschaftliche und gestalterische Aspekte von VFT-Trägern aus Walzträgern. KW - Rahmenbrücke KW - Walzträger-in-Beton KW - Verbundbauweise Y1 - 2021 UR - https://issuu.com/verlagsgruppewiederspahn/docs/brueckenbau_2021_1-2 SN - 1867-643X IS - 1-2 SP - 126 EP - 135 PB - Wiederspahn CY - Wiesbaden ER - TY - JOUR A1 - Zimmermann, Theresa A1 - Höregott, Andreas A1 - Seidl, Günter A1 - Ritlewski, Thomas T1 - Pilotversuch - Präzisionsstahlhöcker statt Unterguss BT - Der Einbau von Präzisionsstahlhöckern stellt bei einer Eisenbahnüberführung in Berlin-Charlottenburg mehr als eine adäquate Lösung zur bisherigen Bauweise dar JF - Der Eisenbahningenieur N2 - Aufgrund von starken Belastungen durch den Zugverkehr mussten auf einer Eisenbahnüberführung (EÜ) mit schwierigen betrieblichen und gleisgeometrischen Rahmenbedingungen Schienenstützpunkte (SSP) saniert werden. Die ursprünglich mit dem elastischen Schienenbefestigungssystem ECF (Elastic Clip Fastener) versehenen SSP, welche in den Überhöhungsbereichen mit einem Polymerbeton untergossen sind, wurden durch die Kombination eines von thyssenkrupp speziell entwickelten Präzisionsstahlhöckers (PSH) mit dem Schienenbefestigungssystem ECF ersetzt. In einem Pilotversuch konnten Erkenntnisse über die Wirksamkeit des neuen Systems ermittelt werden. KW - Eisenbahnbau KW - Brückenbau KW - Schiene KW - Präzisionsstahlhöcker Y1 - 2021 SN - 0013-2810 IS - 3 SP - 25 EP - 29 PB - DVV Media Group GmbH CY - Hamburg ER - TY - JOUR A1 - Seidl, Günter A1 - Marlacher, Wolfgang A1 - Schmidt, Jürgen T1 - Brücke über die Salzach bei Kaprun JF - Brückenbau : Construction & Engineering N2 - Im Zuge der Hochwasserschutzmaßnahmen entlang der Salzach wird für die Überführung der Straße von Zell am See nach Kaprun eine neue Brücke mit größerer Stützweite notwendig. Der Ersatzneubau dieser Brücke über die Salzach ist ein Trogbauwerk in Verbundbauweise. In Querrichtung werden π-Platten mit externer Bewehrung gewählt, um eine große Schlankheit und eine schnelle Bauzeit zu ermöglichen. Die externe Bewehrung der Platten wird feuerverzinkt ausgeführt. KW - Trogbrücke KW - Salzach KW - Kaprun KW - Verbunddübel KW - Verbundbrücke KW - Fahrbahnplatte KW - Feuerverzinken Y1 - 2019 UR - https://issuu.com/verlagsgruppewiederspahn/docs/brueckenbau_2019_1-2 SN - 1867-643X IS - 1-2 SP - 144 EP - 153 PB - Wiederspahn CY - Wiesbaden ER - TY - JOUR A1 - Gleich, Philipp A1 - Maurer, Reinhard T1 - Arch Action Model for the structural assessment of existing prestressed concrete bridges JF - Structural Concrete N2 - Structural assessments of existing older prestressed concrete bridges according to the currently applicable standards and guidelines in Germany generally reveal significant deficiencies in shear reinforcement. Large-scale tests within the scope of research activities commissioned by the Federal Highway Research Institute (BASt) were carried out at TU Dortmund University to analyze the shear load-bearing behavior of continuous prestressed concrete beams in more detail. The Arch Action Model (AAM) was derived from the Simplified Arch Action Model (SAAM) to provide a possible analysis method for determining shear contribution from concrete. Thus, the shear capacity of prestressed beams can be determined in a more realistic manner than using the truss model underlying the current state of standardization. The paper at hand provides information and explanations about the SAAM and AAM with regard to their application to real-world structures for structural bridge assessments. KW - Arch Action Model KW - Spannbetonbrücke KW - Spannbetonbau Y1 - 2023 U6 - https://doi.org/10.1002/suco.202201008 SN - 1751-7648 VL - 24 IS - 5 SP - 5827 EP - 5838 PB - Wiley CY - Massachusetts ER - TY - JOUR A1 - Sorge, Ronny A1 - Rochlani, Mrinali A1 - Riedl, Steffen T1 - Influence of Multiple Modifications on the Fatigue Behavior of Bitumen and Asphalt Mixtures JF - Journal of Engineering Materials and Technology N2 - The study included six bitumens, one unmodified and five modified, and their corresponding asphalt mixtures. The first bitumen was the base bitumen and further five variants were made by the authors using the same base bitumen and different combinations of modifiers which included styrene-butadiene-styrene (SBS), Fischer–Tropsch wax (FTW), ethylene vinyl acetate (EVA), reactive elastomeric terpolymer (RET), and natural asphalt (NA). The influence on the fatigue life of bitumen and asphalt due to modification, bitumen rheology, preload, water storage, and aging was studied. A new temperature range was developed—the fatigue-relevant temperature range (FRTR) for specifying fatigue test temperatures for bitumen and asphalt. A new methodology that includes preload and water storage was also done to study the active adhesion behavior between bitumen and aggregates and its influence on fatigue life. Overall, modifications showed positive influence on the fatigue behavior of bitumen and asphalt. Variants E (SBS and RET) and F (SBS and NA) showed the greatest positive influence with an increase in the fatigue life by 500% and 210% for bitumen and 200% and 375% for asphalt respectively. With water storage, the fatigue life reduced by 500% for unmodified asphalt and in the range of 333–1350% for modified ones. Due to aging, the fatigue life reduced from 700% for unmodified and between 700% and 2500% for modified asphalt mixtures. KW - Polymermodifiziertes Bitumen KW - Asphalt KW - Materialermüdung Y1 - 2024 U6 - https://doi.org/10.1115/1.4063801 SN - 0094-4289 VL - 146 IS - 2 SP - 1 EP - 12 PB - American Society of Mechanical Egnieers (ASME) CY - New York ER - TY - JOUR A1 - Gleich, Philipp T1 - Die Kunst der Diagnose BT - Technische Schadensbewertung in Massivbauwerken und ihr Einfluss auf die finanzielle Bewertung JF - Immobilien & bewerten KW - Massivbau KW - Diagnose Y1 - 2023 SN - 1866-6582 VL - 2023 IS - 3 PB - Sprengnetter CY - Sinzig ER - TY - JOUR A1 - Lorenz, Richard A1 - Petryna, Y. A1 - Lubitz, C. A1 - Lang, O. A1 - Wegener, V. T1 - Thermal deformation monitoring of a highway bridge BT - Combined analysis of geodetic and satellite-based InSAR measurements with structural simulations JF - Journal of Civil Structural Health Monitoring N2 - Structural Health Monitoring (SHM) of civil engineering structures is experiencing an increasing progress in the last decades. The present work focuses on the static behavior of a highway bridge due to environmental temperature effects. The goal of the present study was to test the applicability of the satellite-based synthetic aperture radar interferometry (InSAR) for deformation monitoring of a large, curved highway bridge and to compare the obtained results with alternative measurement techniques like classical geodesy surveying and with an advanced computer simulation. Such a comparison is quite rare and provides an important insight into the accuracy, efficiency and limitations of the InSAR technique in the context of SHM. Especially interesting was the question whether the InSAR technique is suitable for blind monitoring of a cluster of bridges in the region of interest. The present study shows that a pre-knowledge about each structure can be very important for a reliable interpretation of the InSAR measurement results. The second challenge of the study was to overcome several objective difficulties of combining and comparing quite different monitoring techniques that result from different sampling rates, measurement points and other specific features and sensitivities. Nevertheless, a suitable approach has been developed and implemented in the present study for the InSAR and total station measurements, providing new results and important knowledge about novel SHM techniques. KW - Structural Health Monitoring KW - Autobahnbrücke KW - Radarinterferometrie KW - Totalstation KW - Finite-Elemente-Methode Y1 - 2024 U6 - https://doi.org/10.1007/s13349-024-00779-9 SN - 2190-5452 SN - 2190-5479 SP - 1 EP - 19 PB - Springer CY - Berlin, Heidelberg ER -