TY - JOUR A1 - Lorenc, Wojciech A1 - Seidl, Günter T1 - Composite dowels for bridges : trends and challenges for new european design rules JF - ce/papers N2 - The introduction of composite dowels (CDs) in Europe at the beginning of the last decade led to the creation of new forms of composite bridges in which a T-profile is used instead of an I-beam. Both the construction and design methods are new [4]. Experiences from the construction of new bridges and discussion between the authors lead to new significant conclusions, which should be included in the new European approval (CEN-TS). The problem of design formulas for concrete dowels is presented. KW - Scherverbindung KW - Verbunddübel KW - Verbundbrücke KW - Hochbau Y1 - 2023 U6 - https://doi.org/10.1002/cepa.1897 SN - 2509-7075 VL - 6 IS - 1 SP - 118 EP - 129 PB - Ernst & Sohn CY - Berlin ER - TY - BOOK ED - Neuroth, Heike ED - Ortgiese, Michael T1 - Umfrage zum Forschungsdatenmanagement an der FH Potsdam BT - Projektbericht N2 - Forschungsdaten sind in der Wissenschaft ein wichtiger Teil von Forschungsergebnissen. Mit dem vermehrten Aufkommen von digitalen Daten in Forschungsprozessen geht auch eine Verantwortung im Umgang mit ihnen einher. Forschungsdatenmanagement (FDM) steht für nachhaltige Prozesse bei der aktiven Dokumentation und dient der Qualitätssicherung wissenschaftlicher Erkenntnisse. Hochschulen sind als wissenschaftliche Einrichtungen mitverantwortlich für die Sicherung und nachhaltige Verfügbarmachung von Forschungsdaten. Die Fachhochschule Potsdam (FHP) hat eine Umfrage zum Umgang mit Forschungsdaten im November 2017 initiiert, u.a. mit der Fragestellung, welche unterstützenden Maßnahmen an der FHP etabliert werden müssen, um den Umgang mit Forschungsdaten zu verbessern. Die Umfrageergebnisse zeichnen sich durch eine hohe Beteiligung (24,7%) aus. Die Ergebnisse bilden eine fundierte Basis für die Handlungsempfehlungen an die Hochschulleitung. Die Rohdaten und alle weiteren Prozessierungsschritte wurden dokumentiert und mittels DOI publiziert. Der vorliegende Bericht beschreibt die Konzeption, Methodik, Auswertung und Interpretation. Eines der wichtigsten Ergebnisse stellt die große Bedeutung von Forschungsdaten für die tägliche Arbeit der Daten-Produzenten dar. Ein hoher Prozentsatz der Befragten ist bereit, die eigenen Daten für die Nachnutzung bereitzustellen. Allerdings wurden auch Bedarfe z.B. bezüglich rechtlicher Aspekte, Forschungsdatenmanagementplänen, technischer Infrastruktur etc. formuliert. KW - Forschungsdaten KW - Datenmanagement KW - Fachhochschule Potsdam KW - Umfrage KW - Forschungsdatenmanagement KW - Forschungsdatenmanagementplan Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:525-20245 SN - 978-3-934329-95-9 PB - Verl. der Fachhochschule Potsdam CY - Potsdam ER - TY - GEN ED - Laue, Steffen ED - Raue, Jan ED - Röder, Jörg ED - Tubbesing, Markus ED - Hock, Lisa ED - Bley, Volker T1 - Documentation Summer School 2022 | Kukaldosh Madrasah Bukhara Uzbekistan BT - Interdisciplinary at the monument - transfer, innovative methods and research learning in practical projects for the preservation of the cultural heritage of Uzbekistan N2 - Diese Version des Dokuments ist nicht mehr verfügbar. Die aktuelle Version des Dokuments finden Sie unter: https://nbn-resolving.org/urn:nbn:de:kobv:525-31524 oder unter der unten angegebenen URL. T2 - Dokumentation Summer School 2022 | Kukaldosh Madrasah Bukhara Uzbekistan. Interdisciplinär am Denkmal - Transfer, Innovative Methoden und forschendes Lernen an praktischen Projekten für den Erhalt des kulturellen Erbes Usbekistans KW - Kulturerhalt KW - Denkmalpflege KW - Kulturerbe KW - Bausubstanz KW - Erhaltung KW - Usbekistan KW - Konservierung KW - Restaurierung KW - Entdeckendes Lernen Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:525-31257 UR - https://opus4.kobv.de/opus4-fhpotsdam/frontdoor/index/index/searchtype/latest/docId/3152/start/0/rows/10 SN - 978-3-947796-11-3 N1 - Das Dokument wurde aufgrund eines inhaltlichen Fehlers entfernt. Die neue Version ist unter https://nbn-resolving.org/urn:nbn:de:kobv:525-31524 einsehbar. CY - Potsdam ER - TY - JOUR A1 - Pimienta, Pierre A1 - McNamee, Robert A1 - Robert, Fabienne A1 - Boström, Lars A1 - Huang, Shan-Shan A1 - Mróz, Katarzyna A1 - Davie, Colin A1 - Mohaine, Siyimane A1 - Cruz Alonso, Maria A1 - Bodnarova, Lenka A1 - Bosnjak, Josipa A1 - Dal Pont, Stefano A1 - Dao, Vinh A1 - Dauti, Dorjan A1 - Dehn, Frank A1 - Felicetti, Roberto A1 - Hager, Izabela A1 - Hela, Rudolf A1 - Hozjan, Tomaz A1 - Juknat, Michael A1 - Jumppanen, Ulla-Maija A1 - Kirnbauer, Johannes A1 - Kolsek, Jerneja A1 - Korzen, Manfred A1 - Lakhani, Hitesh A1 - Lion, Maxime A1 - Lo Monte, Francesco A1 - Maluk, Christian A1 - Meftah, Fekri A1 - Miah, Md Jihad A1 - Millard, Alain A1 - Mindeguia, Jean-Christophe A1 - Moreau, Bérénice A1 - Msaad, Yahia A1 - Ozawa, Mitsuo A1 - Pesavento, Francesco A1 - Pham, Duc Toan A1 - Pistol, Klaus A1 - Rickard, Ieuan A1 - Correia Rodrigues, Joao Paulo A1 - Roosefid, Mohsen A1 - Schneider, Martin A1 - Sharma, Umesh Kumar A1 - Sideris, Kosmas A1 - Stelzner, Ludwig A1 - Weber, Benedikt A1 - Weise, Frank T1 - Recommendation of RILEM TC 256-SPF on fire spalling assessment during standardised fire resistance tests: complementary guidance and requirements JF - Materials and Structures N2 - The recommendation is based on the co-authors’ work organized by the RILEM TC 256-SPF “Spalling of concrete due to fire: testing and modelling”. It aims to provide useful information, guidance and best practices in fire spalling assessment to laboratories that perform large-scale tests based on fire resistance test standards. It provides guidance on the spalling observation techniques during testing, as well as post-test spalling quantification/assessment methods. This document is intended to be used in conjunction with the fire resistance test standards, e.g. EN 1363-1 and ISO 834-1. KW - Beton KW - Feuerfestigkeit Y1 - 2024 U6 - https://doi.org/10.1617/s11527-023-02248-z SN - 1359-5997 SN - 1871-6873 VL - 57 IS - 1 PB - Springer Science + Business Media B.V CY - Dordrecht ER - TY - BOOK A1 - Sass, Enrico T1 - Mitarbeitermotivation, Mitarbeiterbindung : was erwarten Arbeitnehmer? KW - Arbeitsmotivation KW - Anwerbung KW - Führungskraft KW - Unternehmen Y1 - 2019 SN - 978-3-658-24649-5 U6 - https://doi.org/10.1007/978-3-658-24649-5 PB - Springer Gabler CY - Wiesbaden ER - TY - JOUR A1 - Zanon, Riccardo A1 - Seidl, Günter A1 - Rademacher, Dennis T1 - New ideas for steel-concrete composite bridges overpassing highways : VFT-RS technology JF - ce/papers N2 - Roads overpassing highways or speedways are rather a common case, as such bridges occur in average every 2 km of highways in densely populated areas. Due to the high number and similar boundary conditions, the design and realization tends to be standardized and repetitive. The total length ranges mostly between 40 and 55 m, whereas the construction height is a limiting factor since minimumclearance heights must be guaranteed both for safety as well as for driving comfort. Due to these reasons, highway overpasses have been a field of application where steel-framed composite decks have proventheir efficiency for this task. Starting from Germany, the VFT technology (prefabricated composite beam) has spread in several European countries in the last decades as further development of the standard steel-concrete composite solution. Its configuration fits perfectly to integral frame bridges built over existing infrastructure with the scope to minimize the traffic disturbance. In this paper a further step is proposed: the VFT-RS technology. The change consists in using standard rolled sections by adapting them into the integral frame bridge configuration, further enhancing the structural efficiency with the benefits of high-steel strength. The possibility of weathering steel or hot-dip galvanization create the unique offer of a maintenance-free solution. KW - Verbundbrücke KW - Autobahnbrücke KW - Stahlbrücke Y1 - 2021 U6 - https://doi.org/10.1002/cepa.1292 SN - 2509-7075 VL - 4 IS - 2-4 SP - 269 EP - 278 PB - Ernst & Sohn CY - Berlin ER - TY - CHAP A1 - Walther, Andrei A1 - Röder, Jörg T1 - Practice-oriented building analysis as a subject in the course of civil engineering T2 - e-Journal of nondestructive testing N2 - At the University of Applied Sciences Potsdam, students are introduced to working with built structures in the field of practical building analysis in the master's degree in civil engineering. The basis for the existing analysis is the geometry, materials used and the structure. New structural calculations are required for modifications or extensions. The students are taught which non-destructive testing methods can be used to determine the material properties of the building fabric. In addition, it is presented how the teaching is structured and using examples that show that teaching can be designed to be very practice-relevant. KW - Zerstörungsfreie Werkstoffprüfung KW - Gebäudeanalyse KW - Ultraschallmesstechnik Y1 - 2022 U6 - https://doi.org/10.58286/27196 SN - 1435-4934 VL - 27 IS - 9 SP - 1 EP - 7 PB - NDT.net CY - Kirchwald ER - TY - GEN ED - Steffen, Laue ED - Raue, Jan ED - Röder, Jörg ED - Tubbesing, Markus ED - Hock, Lisa ED - Bley, Volker T1 - Documentation Summer School 2022 | Kukaldosh Madrasah Bukhara Uzbekistan BT - Interdisciplinary at the monument - transfer, innovative methods and research learning in practical projects for the preservation of the cultural heritage of Uzbekistan N2 - The focus of the summer school was on interdisciplinary cooperation. Students and lecturers from the Potsdam University of the three building studies (Architecture and Urban planning, Civil Engineering and Conservation and Restoration) as well as from the Uzbek side from the fields of Architecture, Civil Engineering and Applied Arts devoted themselves to the building with different tasks. A key project goal was to enable students to perceive, recognize and examine a building through long-term study on the spot under professional guidance from various disciplines. They got to know different approaches to a monument together, to practice different investigation and measurement methods and to discuss and interpret the results obtained. T2 - Dokumentation Summer School 2022 | Kukaldosh Madrasah Bukhara Uzbekistan. Interdisciplinär am Denkmal - Transfer, Innovative Methoden und forschendes Lernen an praktischen Projekten für den Erhalt des kulturellen Erbes Usbekistans KW - Kulturerhalt KW - Denkmalpflege KW - Kulturerbe KW - Bausubstanz KW - Erhaltung KW - Usbekistan KW - Konservierung KW - Restaurierung KW - Entdeckendes Lernen Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:525-31524 SN - 978-3-947796-11-3 N1 - Dies ist eine korrigierte Version. CY - Potsdam ER - TY - JOUR A1 - Schmitt, Victor A1 - Braun, Anton A1 - Lechner, Thomas A1 - Seidl, Günter T1 - Entwicklung von Bauweisen im Brückenbau JF - Brückenbau : Construction & Engineering N2 - In vielen Ländern mit hochbelasteten Verkehrsinfrastrukturen ist Bauen mit vorgefertigten Modulen anerkannter Stand der Technik und wird stetig eingesetzt. In der Regel sind es Überbauten mit einem einzelligen Stahlbetonhohlkasten, die, in Segmente aufgeteiltm vor Ort meist im Freivorbau zusammengefügt und mit externen Spanngliedern zusammengespannt werden. Modulbauweisen im Verbundbau sind die Ausnahme, bieten aber gegenüber dem Spannbeton in der Herstellung, beim Transport und der Montage erhebliche Vorteile, da die Fahrbahnsegmente auf die Längsträger einfach aufgelegt werden können. Mit der vorstellten VSM-Bauweise können robuste Überbauten vin Ein- und Mehrfeldbauwerken in kürzester Bauzeit mit geringster Verkehrbehinderung wirtschaftlich realisiert werden. KW - Bauweise KW - Brückenbau KW - Deutschland Y1 - 2019 UR - https://issuu.com/verlagsgruppewiederspahn/docs/brueckenbau_2019_1-2 SN - 1867-643X IS - 1-2 SP - 6 EP - 15 PB - Wiederspahn CY - Wiesbaden ER - TY - JOUR A1 - Seidl, Günter A1 - Rademacher, Dennis A1 - Zanon, Riccardo A1 - Yu, Chao T1 - Weitgespannte Rahmenbrücken mit Walzträgern in Verbundbauweise JF - Brückenbau : Construction & Engineering N2 - Rahmenbrücken in Verbundbauweise werden mit Spannweiten von über 60 m ausgeführt. Bisher wurde der Spannweitenbereich über 40 m aus VFT-Trägern mit geschweißten Trägern realisiert. Walzträger der Güte S460M sind in diesem Spannweitenbereich eine gestalterisch gute Alternative, bergen ein großes Einsparpotenzial im Konstruktionsstahl und bieten eine hohe Flexibilität in Hinblick auf die Schlankheit. Durch die großen Steg- und Flanschdicken sind dei VFT-Träger sehr robust. Der Aufsatz beschreibt die Konstruktion und beleuchtet wirtschaftliche und gestalterische Aspekte von VFT-Trägern aus Walzträgern. KW - Rahmenbrücke KW - Walzträger-in-Beton KW - Verbundbauweise Y1 - 2021 UR - https://issuu.com/verlagsgruppewiederspahn/docs/brueckenbau_2021_1-2 SN - 1867-643X IS - 1-2 SP - 126 EP - 135 PB - Wiederspahn CY - Wiesbaden ER -