@article{LorencSeidl, author = {Lorenc, Wojciech and Seidl, G{\"u}nter}, title = {Composite dowels for bridges : trends and challenges for new european design rules}, series = {ce/papers}, volume = {6}, journal = {ce/papers}, number = {1}, publisher = {Ernst \& Sohn}, address = {Berlin}, issn = {2509-7075}, doi = {10.1002/cepa.1897}, pages = {118 -- 129}, abstract = {The introduction of composite dowels (CDs) in Europe at the beginning of the last decade led to the creation of new forms of composite bridges in which a T-profile is used instead of an I-beam. Both the construction and design methods are new [4]. Experiences from the construction of new bridges and discussion between the authors lead to new significant conclusions, which should be included in the new European approval (CEN-TS). The problem of design formulas for concrete dowels is presented.}, subject = {Verbundd{\"u}bel}, language = {en} } @book{OPUS4-2024, title = {Umfrage zum Forschungsdatenmanagement an der FH Potsdam}, editor = {Neuroth, Heike and Ortgiese, Michael}, publisher = {Verl. der Fachhochschule Potsdam}, address = {Potsdam}, isbn = {978-3-934329-95-9}, doi = {10.5281/zenodo.1161792}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:525-20245}, publisher = {Verlag der Fachhochschule Potsdam}, pages = {192}, abstract = {Forschungsdaten sind in der Wissenschaft ein wichtiger Teil von Forschungsergebnissen. Mit dem vermehrten Aufkommen von digitalen Daten in Forschungsprozessen geht auch eine Verantwortung im Umgang mit ihnen einher. Forschungsdatenmanagement (FDM) steht f{\"u}r nachhaltige Prozesse bei der aktiven Dokumentation und dient der Qualit{\"a}tssicherung wissenschaftlicher Erkenntnisse. Hochschulen sind als wissenschaftliche Einrichtungen mitverantwortlich f{\"u}r die Sicherung und nachhaltige Verf{\"u}gbarmachung von Forschungsdaten. Die Fachhochschule Potsdam (FHP) hat eine Umfrage zum Umgang mit Forschungsdaten im November 2017 initiiert, u.a. mit der Fragestellung, welche unterst{\"u}tzenden Maßnahmen an der FHP etabliert werden m{\"u}ssen, um den Umgang mit Forschungsdaten zu verbessern. Die Umfrageergebnisse zeichnen sich durch eine hohe Beteiligung (24,7\%) aus. Die Ergebnisse bilden eine fundierte Basis f{\"u}r die Handlungsempfehlungen an die Hochschulleitung. Die Rohdaten und alle weiteren Prozessierungsschritte wurden dokumentiert und mittels DOI publiziert. Der vorliegende Bericht beschreibt die Konzeption, Methodik, Auswertung und Interpretation. Eines der wichtigsten Ergebnisse stellt die große Bedeutung von Forschungsdaten f{\"u}r die t{\"a}gliche Arbeit der Daten-Produzenten dar. Ein hoher Prozentsatz der Befragten ist bereit, die eigenen Daten f{\"u}r die Nachnutzung bereitzustellen. Allerdings wurden auch Bedarfe z.B. bez{\"u}glich rechtlicher Aspekte, Forschungsdatenmanagementpl{\"a}nen, technischer Infrastruktur etc. formuliert.}, subject = {Forschungsdaten}, language = {de} } @misc{OPUS4-3125, title = {Documentation Summer School 2022 | Kukaldosh Madrasah Bukhara Uzbekistan}, editor = {Laue, Steffen and Raue, Jan and R{\"o}der, J{\"o}rg and Tubbesing, Markus and Hock, Lisa and Bley, Volker}, address = {Potsdam}, isbn = {978-3-947796-11-3}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:525-31257}, pages = {280}, abstract = {Diese Version des Dokuments ist nicht mehr verf{\"u}gbar. Die aktuelle Version des Dokuments finden Sie unter: https://nbn-resolving.org/urn:nbn:de:kobv:525-31524 oder unter der unten angegebenen URL.}, subject = {Denkmalpflege}, language = {en} } @article{PimientaMcNameeRobertetal., author = {Pimienta, Pierre and McNamee, Robert and Robert, Fabienne and Bostr{\"o}m, Lars and Huang, Shan-Shan and Mr{\´o}z, Katarzyna and Davie, Colin and Mohaine, Siyimane and Cruz Alonso, Maria and Bodnarova, Lenka and Bosnjak, Josipa and Dal Pont, Stefano and Dao, Vinh and Dauti, Dorjan and Dehn, Frank and Felicetti, Roberto and Hager, Izabela and Hela, Rudolf and Hozjan, Tomaz and Juknat, Michael and Jumppanen, Ulla-Maija and Kirnbauer, Johannes and Kolsek, Jerneja and Korzen, Manfred and Lakhani, Hitesh and Lion, Maxime and Lo Monte, Francesco and Maluk, Christian and Meftah, Fekri and Miah, Md Jihad and Millard, Alain and Mindeguia, Jean-Christophe and Moreau, B{\´e}r{\´e}nice and Msaad, Yahia and Ozawa, Mitsuo and Pesavento, Francesco and Pham, Duc Toan and Pistol, Klaus and Rickard, Ieuan and Correia Rodrigues, Joao Paulo and Roosefid, Mohsen and Schneider, Martin and Sharma, Umesh Kumar and Sideris, Kosmas and Stelzner, Ludwig and Weber, Benedikt and Weise, Frank}, title = {Recommendation of RILEM TC 256-SPF on fire spalling assessment during standardised fire resistance tests: complementary guidance and requirements}, series = {Materials and Structures}, volume = {57}, journal = {Materials and Structures}, number = {1}, publisher = {Springer Science + Business Media B.V}, address = {Dordrecht}, issn = {1359-5997}, doi = {10.1617/s11527-023-02248-z}, pages = {12}, abstract = {The recommendation is based on the co-authors' work organized by the RILEM TC 256-SPF "Spalling of concrete due to fire: testing and modelling". It aims to provide useful information, guidance and best practices in fire spalling assessment to laboratories that perform large-scale tests based on fire resistance test standards. It provides guidance on the spalling observation techniques during testing, as well as post-test spalling quantification/assessment methods. This document is intended to be used in conjunction with the fire resistance test standards, e.g. EN 1363-1 and ISO 834-1.}, subject = {Beton}, language = {en} } @book{Sass, author = {Sass, Enrico}, title = {Mitarbeitermotivation, Mitarbeiterbindung : was erwarten Arbeitnehmer?}, publisher = {Springer Gabler}, address = {Wiesbaden}, isbn = {978-3-658-24649-5}, doi = {10.1007/978-3-658-24649-5}, pages = {153}, subject = {Arbeitsmotivation}, language = {de} } @article{ZanonSeidlRademacher, author = {Zanon, Riccardo and Seidl, G{\"u}nter and Rademacher, Dennis}, title = {New ideas for steel-concrete composite bridges overpassing highways : VFT-RS technology}, series = {ce/papers}, volume = {4}, journal = {ce/papers}, number = {2-4}, publisher = {Ernst \& Sohn}, address = {Berlin}, issn = {2509-7075}, doi = {10.1002/cepa.1292}, pages = {269 -- 278}, abstract = {Roads overpassing highways or speedways are rather a common case, as such bridges occur in average every 2 km of highways in densely populated areas. Due to the high number and similar boundary conditions, the design and realization tends to be standardized and repetitive. The total length ranges mostly between 40 and 55 m, whereas the construction height is a limiting factor since minimumclearance heights must be guaranteed both for safety as well as for driving comfort. Due to these reasons, highway overpasses have been a field of application where steel-framed composite decks have proventheir efficiency for this task. Starting from Germany, the VFT technology (prefabricated composite beam) has spread in several European countries in the last decades as further development of the standard steel-concrete composite solution. Its configuration fits perfectly to integral frame bridges built over existing infrastructure with the scope to minimize the traffic disturbance. In this paper a further step is proposed: the VFT-RS technology. The change consists in using standard rolled sections by adapting them into the integral frame bridge configuration, further enhancing the structural efficiency with the benefits of high-steel strength. The possibility of weathering steel or hot-dip galvanization create the unique offer of a maintenance-free solution.}, subject = {Verbundbr{\"u}cke}, language = {en} } @inproceedings{WaltherRoeder, author = {Walther, Andrei and R{\"o}der, J{\"o}rg}, title = {Practice-oriented building analysis as a subject in the course of civil engineering}, series = {e-Journal of nondestructive testing}, volume = {27}, booktitle = {e-Journal of nondestructive testing}, number = {9}, publisher = {NDT.net}, address = {Kirchwald}, issn = {1435-4934}, doi = {10.58286/27196}, pages = {1 -- 7}, abstract = {At the University of Applied Sciences Potsdam, students are introduced to working with built structures in the field of practical building analysis in the master's degree in civil engineering. The basis for the existing analysis is the geometry, materials used and the structure. New structural calculations are required for modifications or extensions. The students are taught which non-destructive testing methods can be used to determine the material properties of the building fabric. In addition, it is presented how the teaching is structured and using examples that show that teaching can be designed to be very practice-relevant.}, subject = {Zerst{\"o}rungsfreie Werkstoffpr{\"u}fung}, language = {en} } @misc{OPUS4-3152, title = {Documentation Summer School 2022 | Kukaldosh Madrasah Bukhara Uzbekistan}, editor = {Steffen, Laue and Raue, Jan and R{\"o}der, J{\"o}rg and Tubbesing, Markus and Hock, Lisa and Bley, Volker}, address = {Potsdam}, isbn = {978-3-947796-11-3}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:525-31524}, pages = {280}, abstract = {The focus of the summer school was on interdisciplinary cooperation. Students and lecturers from the Potsdam University of the three building studies (Architecture and Urban planning, Civil Engineering and Conservation and Restoration) as well as from the Uzbek side from the fields of Architecture, Civil Engineering and Applied Arts devoted themselves to the building with different tasks. A key project goal was to enable students to perceive, recognize and examine a building through long-term study on the spot under professional guidance from various disciplines. They got to know different approaches to a monument together, to practice different investigation and measurement methods and to discuss and interpret the results obtained.}, subject = {Denkmalpflege}, language = {en} } @article{SchmittBraunLechneretal., author = {Schmitt, Victor and Braun, Anton and Lechner, Thomas and Seidl, G{\"u}nter}, title = {Entwicklung von Bauweisen im Br{\"u}ckenbau}, series = {Br{\"u}ckenbau : Construction \& Engineering}, journal = {Br{\"u}ckenbau : Construction \& Engineering}, number = {1-2}, publisher = {Wiederspahn}, address = {Wiesbaden}, issn = {1867-643X}, pages = {6 -- 15}, abstract = {In vielen L{\"a}ndern mit hochbelasteten Verkehrsinfrastrukturen ist Bauen mit vorgefertigten Modulen anerkannter Stand der Technik und wird stetig eingesetzt. In der Regel sind es {\"U}berbauten mit einem einzelligen Stahlbetonhohlkasten, die, in Segmente aufgeteiltm vor Ort meist im Freivorbau zusammengef{\"u}gt und mit externen Spanngliedern zusammengespannt werden. Modulbauweisen im Verbundbau sind die Ausnahme, bieten aber gegen{\"u}ber dem Spannbeton in der Herstellung, beim Transport und der Montage erhebliche Vorteile, da die Fahrbahnsegmente auf die L{\"a}ngstr{\"a}ger einfach aufgelegt werden k{\"o}nnen. Mit der vorstellten VSM-Bauweise k{\"o}nnen robuste {\"U}berbauten vin Ein- und Mehrfeldbauwerken in k{\"u}rzester Bauzeit mit geringster Verkehrbehinderung wirtschaftlich realisiert werden.}, subject = {Bauweise}, language = {de} } @article{SeidlRademacherZanonetal., author = {Seidl, G{\"u}nter and Rademacher, Dennis and Zanon, Riccardo and Yu, Chao}, title = {Weitgespannte Rahmenbr{\"u}cken mit Walztr{\"a}gern in Verbundbauweise}, series = {Br{\"u}ckenbau : Construction \& Engineering}, journal = {Br{\"u}ckenbau : Construction \& Engineering}, number = {1-2}, publisher = {Wiederspahn}, address = {Wiesbaden}, issn = {1867-643X}, pages = {126 -- 135}, abstract = {Rahmenbr{\"u}cken in Verbundbauweise werden mit Spannweiten von {\"u}ber 60 m ausgef{\"u}hrt. Bisher wurde der Spannweitenbereich {\"u}ber 40 m aus VFT-Tr{\"a}gern mit geschweißten Tr{\"a}gern realisiert. Walztr{\"a}ger der G{\"u}te S460M sind in diesem Spannweitenbereich eine gestalterisch gute Alternative, bergen ein großes Einsparpotenzial im Konstruktionsstahl und bieten eine hohe Flexibilit{\"a}t in Hinblick auf die Schlankheit. Durch die großen Steg- und Flanschdicken sind dei VFT-Tr{\"a}ger sehr robust. Der Aufsatz beschreibt die Konstruktion und beleuchtet wirtschaftliche und gestalterische Aspekte von VFT-Tr{\"a}gern aus Walztr{\"a}gern.}, subject = {Rahmenbr{\"u}cke}, language = {de} }