open_access
Refine
Year of publication
- 2022 (28) (remove)
Document Type
- Article (16)
- Bachelor Thesis (5)
- Master's Thesis (4)
- Conference Proceeding (3)
Language
- English (18)
- German (9)
- Multiple languages (1)
Keywords
- E-Learning (2)
- Informationskompetenz (2)
- SME (2)
- 3D-Druck (1)
- AI-based security applications (1)
- Additive Fertigung (1)
- Amputation (1)
- Analyse (1)
- Anwendungssoftware (1)
- Augmented Realiy (1)
In this study we have examined the potential of excess wind use in Germany. Excess wind constitutes roughly 40% of unused capacities of installed wind power in Germany. Using LP modelling and representative annual load profiles on an hourly resolution, we investigate the impact of the price level for wind peak power supply of residential quarters with heat, cold and electricity in Germany in combination with different power ratios of wind supply and demand. As we show, an application of wind peak tariff is technically and economically feasible and allows using green leftover energy without going in competition with e.g., green fuels or green H2 production.
Glass-ceramic composites consisting of potassium-iron-silicate glass and barium titanate mixed in various proportions were successfully synthesized by low-temperature sintering. The crystal structure of the obtained composite samples, the porosity and the microhardness were studied by the X-ray diffraction, the electron microscopy, the weight method, and the Vickers method. Electrical characteristics (dielectric permittivity, tunability and losses) of as-prepared and annealed in oxygen medium samples were investigated at microwaves. According to structural analysis, the synthesized samples are a mixture of KFeSi glass, ferroelectric BaTiO3, and dielectric barium polytitanates; the ratio of the latter determines the electrical properties of the composites. Depending on the content of barium titanate, the studied composite samples show a permittivity from 50 to 270 with a dielectric loss level of 0,1–0,02 in frequency range from 3 to 10 GHz. Annealing of composite samples in an oxygen-containing environment leads to an increase in their dielectric permittivity and tunability by 10–25% and a twofold decrease in dielectric loss.
IK als Schlüsselkonzept in der Hochschulbildung beinhaltet neben anderen Fähigkeiten auch den Bereich der Quellenkompetenz. Diese beschreibt die Fähigkeit, Quellen hinsichtlich ihrer Qualität und ihrer Funktion kritisch zu
bewerten. Um diese Fähigkeit zu verbessern, wurde das HUMAN-Modell von Baldarelli et al. entwickelt. Ziel dieser Arbeit ist es, dieses HUMAN-Modell in E-Learning-Modulen zur Informationskompetenzvermittlung digital umzusetzen und die Auswirkungen des neuen Ansatzes zu evaluieren. Zu diesem
Zweck werden zunächst neue Lernmodule nach dem Human-Centered Design Ansatz entworfen und implementiert. Anschließend erfolgt die Evaluation des Moduls in einer Mixed-Methods-Untersuchung in zwei Bachelorseminargruppen zweier aufeinanderfolgender Jahrgänge, die abgesehen von
den neuen Lernmodule ein vergleichbares Treatment erhalten. Basierend auf Pre- und Post-Tests, Leistungsnachweisen und der Moodle-Aktivität beider Gruppen soll gemessen werden, inwiefern sich die Leistung und die Performance durch den Einsatz des neuen Lernmoduls verändert haben. Die Ergebnisse zeigen, dass der Leistungszuwachs zwischen Pre- und Post-Test in der HUMAN-Gruppe leicht höher ist als in der Vergleichsgruppe, insbesondere in Bezug auf den Bereich Quellenbeurteilung. Weiterhin zeigt die Analyse des schriftlichen Leistungsnachweises, dass die wissenschaftliche Qualität der zitierten Quellen in der Literaturliste bei der HUMAN-Gruppe größer ist, auch wenn die Gesamtperformanz der Studierenden sich nicht verbessert hat. Zur weiteren Analyse wäre es sinnvoll, die Quellen-
zusammensetzung der Studierenden in der Bachelorarbeit zu untersuchen, um auch langfristige Auswirkungen zu evaluieren.
In recent years, the messaging application has been Indonesia’s most widely used mobile app. The number of users of these instant messaging (IM) applications has also been increasing constantly. Unfortunately, research has mentioned that older users often face challenges in using them. Although some papers have created guidelines for designing interfaces for the elderly, these applications are still focused on developing according to the need of young people. In addition, the aging of adults increases their chances of facing some difficulties. Therefore, this thesis aims to give a better understanding of the interface of the mobile instant messaging (MIM) application preferred by its users, specifically Indonesian users. By distributing an online-based survey to 150 Indonesian users of the MIM application, the preferences of several features in the message list and messaging interface of this application are collected. Then, the statistical analysis of the results found that the preferences of both users’ age groups differ. Among them are the button or icon each age group finds more suitable, the bottom bar in the messaging interface, and the placement of action options to be performed to the message they prefer most. Thus, this research also presents design recommendations that both younger and older users prefer.
In dieser Arbeit werden Achsdrehmomente und Motorlast eines Industrieroboters der
Firma FANUC analysiert, um diese über eine Logging-Software zu optimieren. Das
Ziel ist es, über die Aufzeichnung der Motordaten, mechanische Belastungen an den
Motoren der Robotergelenke zu reduzieren. Durch diesen Ansatz können Bewegungen
des Roboters optimiert und Traglasten maximiert werden.
Die zur Zeit angebotene Robotersteuerung des Herstellers bietet nur wenig zeitlich aufgelöste Diagnoseoptionen.
Die vorgestellte Lösung unterscheidet sich von anderen Lösungen darin, dass keine
Verkabelung von zusätzlicher Hardware notwendig ist. Auch muss keine zusätzliche,
kostenpflichtige Software installiert werden.
Der in dieser Arbeit verfolgte Ansatz implementiert eine webbasierte Logging-Software für einen Client-PC und ein KAREL
Programm für einen FANUC Roboter, welches als Schnittstelle dient.
Die Parameter Drehmoment(Disturbance Torque, Torque Monitor) und Motorstrom
(OVC Monitor) konnten periodisch alle 50ms von der Robotersteuerung aufgezeichnet
und anschließend zeitlich aufgelöst dargestellt werden. Es wurden Experimente mit
verschiedenen Geschwindigkeiten, Achsstellungen und Traglasten durchgeführt.
Ein signifikantes Ergebnis konnte bei der Reduzierung der Motorlast unter Verwendung von
Beschleunigungsrampen festgestellt werden. Auch wurde der negative Einfluss einer
inkorrekt eingestellten Traglast bei der Ansteuerung der Motoren nachvollzogen und
aufgezeichnet. In einem Kundenprojekt konnte die Software erfolgreich zur Machbarkeitsanalyse eingesetzt werden.
Single dielectric microspheres can manipulate light focusing and collection to enhance optical interaction with surfaces. To demonstrate this principle, we experimentally investigate the enhancement of the Raman signal collected by a single dielectric microsphere, with a radius much larger than the exciting laser spot size, residing on the sample surface. The absolute microsphere-assisted Raman signal from a single graphene layer measured in air is more than a factor of two higher than that obtained with a high numerical aperture objective. Results from Mie’s theory are used to benchmark numerical simulations and an analytical model to describe the isolated microsphere focusing properties. The analytical model and the numerical simulations justify the Raman signal enhancement measured in the microsphere-assisted Raman spectroscopy experiments.
Diese Arbeit gibt einen Einblick sowie eine Einschätzung eines Code-basierten
Werkzeuges zur Datenvisualierung, der d3js bibliothek für JavaScript. Es
werden nicht nur das Potential, sondern auch die Vor- und Nachteile evaluiert.
Weiterhin wird eine Einschätzung gegeben, wann der Einsatz dieses Werkzeuges
sinnvoll ist. Um diese Einschätzungen treffen zu können, werden einige Di-
agramme, bezüglich der aktuellen Flüchtlichgssituation, die aufgrund des
bewaffneten Ukrainekonfilktes besteht, erstellt. Dafür werden zunächst die
nötigen Grundlagen erklärt. Dies umfasst sowohl Daten und Datentypen,
als auch Diagramme und deren Aufbau. Abschließend werden die erstellten
Diagramme, sowie d3js im Diskussionsteil ausgewertet.
Da d3js in reinem JavaScript implementiert ist, lässt es sich problem-
los mit anderen Frameworks kombinieren. Der Fokus von d3js liegt auf der
schnellen und einfachen Manipulation von Elementen im Document Object
Model. d3js ist jedoch kein Werkzeug, mit dem in wenigen Zeilen Quell-
code ganze Diagramme erstellt werden können. Vielmehr müssen sowohl die
einzelnen Elemente eines Diagrammes, wie auch deren Position und Ausse-
hen händisch definiert werden. Das ermöglicht ein Höchstmaß an Kontrolle
über das Aussehen und Verhalten der Diagramme. Es ist jedoch auch zeitin-
tensiv und führt eventuell zur Implementation unübersichtlicher Diagramme.
Gepaart mit der hohen initialen Lernkurve kann die Nutzung von d3js nur
in speziellen Fällen, welche die volle Kontrolle über Aussehen und Verhalten
von Diagrammen benötigen, empfohlen werden.
Auf dem Weg zum Replikator
(2022)
Die vorliegende Arbeit beschäftigt sich mit der Frage, wie ein E-Learning-Angebot an der Technischen Hochschule Brandenburg das Interesse am Thema der Informationskompetenz steigern sowie diese Kompetenzen entsprechend vermitteln kann. Der Fokus liegt dabei auf zwei quantitativen Umfragen, der Erstellung eines Kurses in Moodle sowie eine Handlungsempfehlung, um die Digitale Lehre an der THB und der Hochschulbibliothek weiter zu etablieren.
Gemeinsame Digitalisierung durch die Entwicklung von IT-Governance-Strukturen auf Landesebene
(2022)
Making and interpretation of drawings and schematics is an important skill to be developed in engineering education. The question type STACK in the Moodle learning management system combined with the interactive graphics library JSXGraph has a great potential for implementation of e-learning resources addressing these skills in formative and summative settings. The authoring process of such materials is complex due to multiple markup and programming languages like HTML, LaTeX, Maxima and JavaScript (JS) being involved. The Meclib concept mitigates this complexity and allows for efficient bulk production of material with consistent appearance and user experience. The core of Meclib is a set of pre-defined JSXGraph-based objects with an interface to Maxima, such that no problem specific JS code is required at all. The present paper outlines the basic ideas of the implementation and demonstrates the approach for some typical examples of different complexity. The focus is on applications in engineering mechanics, starting from static illustrations up to an editor for free body diagrams, with rich adaptive formative feedback.
Biomass gasification is recognized as a viable avenue to accelerate the sustainable production of hydrogen. In this work, a numerical simulation model of air gasification of rice husks is developed using the Aspen Plus to investigate the feasibility of producing hydrogen-rich syngas. The model is experimentally validated with rice husk gasification results and other published studies. The influence of temperature and equivalence ratio on the syngas composition, H2 yield, LHVSyngas, H2/CO ratio, CGE, and PCG was studied. Furthermore, the synchronized effects of temperature and ER are studied using RSM to determine the operational point of maximizing H2 yield and PCG. The RSM analysis results show optimum performance at temperatures between 820 °C and 1090 °C and ER in the range of 0.06–0.10. The findings show that optimal operating conditions of the gasification system can be achieved at a more refined precision through simulations coupled with advanced optimization techniques.