open_access
Refine
Year of publication
Document Type
- Article (36)
- Other (7)
- Conference Proceeding (5)
- Book (4)
- Lecture (4)
- Bachelor Thesis (3)
- Contribution to a Periodical (2)
- Diploma Thesis (2)
- Master's Thesis (2)
- Preprint (1)
Keywords
- SMath (4)
- Software (4)
- Bologna-Prozess (3)
- Anleitung (2)
- Bachelor (2)
- Maxima <Programm> (2)
- 3D-Druck (1)
- 4,4-(hexafluoroisopropylidene) dianiline (1)
- 5,5-methylene bis(2-aminophenol) (1)
- Additive Fertigung (1)
Institute
- Fachbereich Technik (67) (remove)
Glass-ceramic composites consisting of potassium-iron-silicate glass and barium titanate mixed in various proportions were successfully synthesized by low-temperature sintering. The crystal structure of the obtained composite samples, the porosity and the microhardness were studied by the X-ray diffraction, the electron microscopy, the weight method, and the Vickers method. Electrical characteristics (dielectric permittivity, tunability and losses) of as-prepared and annealed in oxygen medium samples were investigated at microwaves. According to structural analysis, the synthesized samples are a mixture of KFeSi glass, ferroelectric BaTiO3, and dielectric barium polytitanates; the ratio of the latter determines the electrical properties of the composites. Depending on the content of barium titanate, the studied composite samples show a permittivity from 50 to 270 with a dielectric loss level of 0,1–0,02 in frequency range from 3 to 10 GHz. Annealing of composite samples in an oxygen-containing environment leads to an increase in their dielectric permittivity and tunability by 10–25% and a twofold decrease in dielectric loss.
Gefrierende Gewässer
(2021)
Rolling contact fatigue generates cracks on the running surface of high strength railway rails which grow under a small angle into the rail head. These cracks can cause in its last stage the fracturing of the rail. The crack extension behaviour is – as the origin of these cracks too – influenced by the cold working of the rail steel. The crack growth in the first stage is fracture mechanically analyzed by means of two-dimensional modelling. The simulation results are assessed for the use of rail grinding. A criterion for the change of the crack growth direction could not be derived, but the following stages of the crack growth in the transverse direction and the final fracture and the conditions for secondary fractures are considered. Rolling contact fatigue generates cracks on the running surface of high strength railway rails which grow under a small angle into the rail head. These cracks can cause in its last stage the fracturing of the rail. The crack extension behaviour is – as the origin of these cracks too – influenced by the cold working of the rail steel. The crack growth in the first stage is fracture mechanically analyzed by means of two-dimensional modelling. The simulation results are assessed for the use of rail grinding. A criterion for the change of the crack growth direction could not be derived, but the following stages of the crack growth in the transverse direction and the final fracture and the conditions for secondary fractures are considered.
Fahrflächenschäden
(2004)
In der Fachliteratur wurde mehrfach versucht, die durch Rollkontaktermüdung hervorgerufenen Schienenfehler bruchmechanisch zu analysieren, wobei zufriedenstellende Lösungen offensichtlich nicht gefunden wurden. Die eigenen bruchmechanischen Analysen wurden bei Berücksichtigung der Kaltverformung des Schienenmaterials durchgeführt, wodurch die Materialeigenschaften nicht mehr isotrop, sondern orthotrop und abhängig vom Grad der Kaltverformung sind. Die bruchmechanischen Rißausbreitungsanalysen wurden unter der konservativen Annahme eines geneigten Einzelrisses bei zweidimensionaler Idealisierung durchgeführt. Hinsichtlich der Beanspruchung wurde angenommen, daß die Schiene an der Fahrfläche biege-druck- und kontakt-beansprucht ist. Die bruchmechanischen Analysen wurden als Monte-Carlo-Simulation gestaltet, wobei die bruchmechanischen Rißwachstumseigenschaften in Abhängigkeit der jeweils erreichten Rißtiefe berücksichtigt wurden. Aus dem Streufeld der simulierten Rißausbreitungskurven wurde als repräsentativ diejenige Kurve genommen, der eine Rißwachstumsgeschwindigkeit von 90% zugeschrieben wurden kann. Diese repräsentative Rißwachstumskurve wurde modifiziert, um letztlich eine Kurve zur Bewertung der sich entwickelnden Rollkontaktermüdungsrisse abzuleiten. Die Analysen für die Head Checks und die Squats unterscheiden sich nur durch unterschiedliche Rißneigungswinkel, die für Head Checks im Mittel 16,4°, für Squats im Mittel 10,1° betragen. Um das bruchmechanische Problem der Ausbreitung der Rollkontakt-Ermüdungsrisse umfassend zu betrachten, sind auch Analysen und Bewertungen für Risse vorgenommen worden, die aus der geneigten Richtung in den Querschnitt der Schiene umgeschlagen sind. Der Querriß wird idealisiert mit einer geraden, horizontalen Rißfront, wobei anders als bei den Rollkontakt-Ermüdungsrissen die Temperaturbeanspruchung für das Rißwachstum wesentlich ist. Angesichts des Umstandes, daß Head Checks in großer Zahl hintereinander auftreten, und daß eine dann gebrochene Schiene bei der weiteren Beanspruchung durch die Fahrzeuge weitere Brüche zur Folge hat, ist ebenfalls analysiert worden, wie tief die Risse sein müssen, die zu derartigen Folgebrüchen führen. Die an der Fachhochschule Brandenburg durchgeführten bruchmechanischen Untersuchungen wurden finanziert von der Dr. Hermann und Ellen Klaproth-Stiftung und von der Deutschen Bahn AG betreut. Beiden Institutionen sei an dieser Stelle herzlich gedankt.
This study analyzes approaches to decarbonize the energy supply of the secondary steel processing industry. Therefore, real data from a secondary steel production company is used in combination with state-of-the art low carbon energy supply technologies. Also, the use of waste heat from a pusher furnace for process integration is considered. The developed temporal process model allows holistic optimizing and expanding the steel making process system regarding techno-economic criteria. As we show, implementing the annual heat demand of a municipality shows that a nearly 100 % self-sufficient heat supply is possible.