TY - THES A1 - Seeland, Jan Philipp T1 - Entwicklung einer Logging-Software zur Überwachung und Analyse der Achsdrehmomente von Industrierobotern N2 - In dieser Arbeit werden Achsdrehmomente und Motorlast eines Industrieroboters der Firma FANUC analysiert, um diese über eine Logging-Software zu optimieren. Das Ziel ist es, über die Aufzeichnung der Motordaten, mechanische Belastungen an den Motoren der Robotergelenke zu reduzieren. Durch diesen Ansatz können Bewegungen des Roboters optimiert und Traglasten maximiert werden. Die zur Zeit angebotene Robotersteuerung des Herstellers bietet nur wenig zeitlich aufgelöste Diagnoseoptionen. Die vorgestellte Lösung unterscheidet sich von anderen Lösungen darin, dass keine Verkabelung von zusätzlicher Hardware notwendig ist. Auch muss keine zusätzliche, kostenpflichtige Software installiert werden. Der in dieser Arbeit verfolgte Ansatz implementiert eine webbasierte Logging-Software für einen Client-PC und ein KAREL Programm für einen FANUC Roboter, welches als Schnittstelle dient. Die Parameter Drehmoment(Disturbance Torque, Torque Monitor) und Motorstrom (OVC Monitor) konnten periodisch alle 50ms von der Robotersteuerung aufgezeichnet und anschließend zeitlich aufgelöst dargestellt werden. Es wurden Experimente mit verschiedenen Geschwindigkeiten, Achsstellungen und Traglasten durchgeführt. Ein signifikantes Ergebnis konnte bei der Reduzierung der Motorlast unter Verwendung von Beschleunigungsrampen festgestellt werden. Auch wurde der negative Einfluss einer inkorrekt eingestellten Traglast bei der Ansteuerung der Motoren nachvollzogen und aufgezeichnet. In einem Kundenprojekt konnte die Software erfolgreich zur Machbarkeitsanalyse eingesetzt werden. KW - FANUC KW - Industrieroboter KW - Motordrehmoment KW - Logging KW - Analyse KW - KAREL KW - Software Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus4-28294 ER - TY - THES A1 - Henker, Maik T1 - Anwendung der IT-Grundschutz-Methodik auf die IT-gestützte Personal- und Gebäudeverwaltung einer Landesbehörde N2 - Eine Landesbehörde in Sachsen ist zum Schutz vor Cyberangriffen gesetzlich verpflichtet ein Informationssicherheitsmanagementsystem zu errichten. Die dafür nötigen Voraussetzungen wie die Einbindung der Leitungsebene und die Erstellung eines Sicherheitskonzeptes liegen bisher nicht vor. Für den Einstieg in die Informationssicherheit veranschaulicht diese Bachelorarbeit die Anwendung der IT-Grundschutz-Methodik des BSI. Zur Komplexitätsreduzierung wurde methodisch die Kernabsicherung nach BSI 200-2 zunächst für die Personalverwaltung und die Gebäudeverwaltung durchgeführt. Im Anschluss wurden Teile der unterstützenden IT-Systeme analysiert. Als Ergebnis der Strukturanalyse, Schutzbedarfsfeststellung, Risikoanalyse und des interviewgestützten Soll-Ist-Vergleiches entstand ein Sicherheitskonzept. Aus dessen Umsetzungstand wurde ein Umsetzungsplan entwickelt. N2 - A state authority in saxony is obligated by law to establish a Management Systems for Information Security to protect them against cyber-attacks. The necessary pre-conditions like accepting the responsibility by the top management and drawing up a security concept are not present yet. To initiate information security these bachelor thesis shows the usage of IT-Grundschutz Methodology. Cause for reducing complexity the core protection from BSI 200-2 was proceeded for personnel administration and for building management for the moment. Afterward parts of the supporting IT systems have been analysed. In result of structure analysis, protection needs, risk analysis and interview-based gap analysis a security concept was developed. On its state an implementation order has been developed. KW - IT-Grundschutz KW - BSI-Standard 200 KW - Informationssicherheit KW - Informationssicherheitskonzept KW - Öffentliche Verwaltung KW - IT-Grundschutz KW - BSI Standards 200 KW - information security KW - security concept KW - public administration Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus4-28381 ER - TY - THES A1 - Selent, Paulina T1 - Deepfakes im Marketing: Eine Analyse von Deepfake-Marketing mit exemplarischer Ausarbeitung eines eigenen Deepfake-Modells zur Überprüfung von Effekten bei Rezipienten N2 - In dieser Masterarbeit wird der Einsatz von Deepfakes im Marketing untersucht. Es geht darum, Deepfake-Marketing zu analysieren und vier eigene Deepfakes zu erstellen, um mögliche Effekte bei Rezipienten zu erkennen. Dazu wird die folgende Forschungsfrage „Welche Effekte lösen hyperpersonalisierte Werbebotschaften durch Deepfakes bei Probanden aus?“ aufgestellt. Für die Beantwortung der Forschungsfrage wird zunächst die Personalisierung von Werbung, sowie Deepfakes im Allgemeinen thematisiert. Im Anschluss daran wurden die Vor- und Nachteile der Hyperpersonalisierung durch die Integration von Deepfakes in die Werbung analysiert und vier eigene Deepfakes auf Basis realer Video-Werbungen generiert. Zur Überprüfung der möglichen Effekte bei Rezipienten wurde eine Online-Umfrage erarbeitet, bei der 22 Probanden die vier selbst produzierten Deepfakes sahen und Fragen zu ihrer persönlichen Einstellung zur Personalisierung durch Deepfakes mitteilten. Die Ergebnisse der nicht repräsentativen Umfrage zeigen, dass sich die Auswirkungen bei hyperpersonalisierten Werbebotschaften durch Deepfakes primär in zwei Kategorien einordnen lassen: positive Überraschung und Misstrauen. Im Detail können die Probanden Deepfakes nicht eindeutig erkennen und wünschen sich eine offene Deklarierung von Deepfake- Inhalten in der Werbung. Bereits 4 von 10 Teilnehmern würden sogar ihre Daten für die Produktion von Deepfake-Werbung zur Verfügung stellen. Doch auch die Angst vor dem Missbrauch persönlicher Daten und möglichen Gefahren, welche von Deepfakes ausgehen könnten, belasten die Teilnehmer. Für zukünftige Forschung bietet sich an, zur Produktvermarktung mit Deepfake-Werbung weiterzuforschen. Dafür bedarf es in erster Linie eine umfangreichere Datenerhebung. KW - Deepfake KW - Marketing KW - Hyperpersonalisierung KW - künstliche Intelligenz Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus4-28395 ER - TY - JOUR A1 - Weimer, Katja A1 - Buschhart, Cliff A1 - Broelz, Ellen K. A1 - Enck, Paul A1 - Horing, Björn T1 - Bibliometric Properties of Placebo Literature From the JIPS Database: A Descriptive Study JF - Frontiers in Psychiatry Y1 - 2022 U6 - https://doi.org/10.3389/fpsyt.2022.853953 SN - 1664-0640 VL - 13 PB - Frontiers Research Foundation ER - TY - JOUR A1 - Vollmer, Michael A1 - Shaw, Joseph A. T1 - Seeing better in nature: contrast enhancement by near infrared imaging JF - European Journal of Physics Y1 - 2022 U6 - https://doi.org/10.1088/1361-6404/ac578d VL - 43 IS - 3 PB - Institute of Physics Publishing ER - TY - JOUR A1 - Regehly, Martin A1 - Hecht, Stefan T1 - Auf dem Weg zum Replikator BT - volumetrischer 3D-Druck JF - Physik in unserer Zeit KW - Xolographie KW - 3D-Druck KW - Additive Fertigung KW - volumetrisch KW - Photoschalter KW - Lichtschnitt Y1 - 2022 U6 - https://doi.org/10.1002/piuz.202201637 SN - 1521-3943 SN - 1521-3943 (eISSN) VL - 53 IS - 3 SP - 125 EP - 131 PB - Wiley-VCH GmbH ER - TY - CHAP A1 - Schnitzer, Julia A1 - Kodalle, Micha T1 - Brain computer interface (BCI)–UX-design for visual and non-visual interaction by mental commands in the context of technical possibilities T2 - Proc. IS&T Int’l. Symp. on Electronic Imaging: Mobile Devices and Multimedia: Enabling Technologies, Algorithms, and Applications Y1 - 2022 U6 - https://doi.org/10.2352/EI.2022.34.3.MOBMU-402 SP - 402-1 EP - 402-88 PB - Society for Imaging Sciences and Technology CY - Springfield, VA ER - TY - CHAP A1 - van Santen, Esther T1 - Cookie Monsters on Media Websites - Dark Patterns in Cookie Consent Notices T2 - Konferenz: IARIA ICCGI 2022. The Seventeenth International Multi-Conference on Computing in the Global Information Technology ; May 22, 2022 to May 26, 2022 - Venice, Italy KW - cooki consent notice KW - dark pattern KW - ethical design KW - media websites Y1 - 2022 SP - 1 EP - 4 PB - IARIA ER - TY - CHAP A1 - Revina, Aleksandra A1 - Aksu, Ünal T1 - Towards a Business Process Complexity Analysis Framework Based on Textual Data and Event Logs T2 - 17th International Conference on Wirtschaftsinformatik, February 2022, Nürnberg, Germany KW - Business process analysis KW - complexity KW - event log KW - textual data Y1 - 2022 UR - https://aisel.aisnet.org/wi2022/bpm/bpm/4 ER - TY - THES A1 - Surjanto, Jennifer T1 - Analysis of the Preferences of Younger and Older Indonesian Users Towards the User Interface of Mobile Instant Messaging Applications N2 - In recent years, the messaging application has been Indonesia’s most widely used mobile app. The number of users of these instant messaging (IM) applications has also been increasing constantly. Unfortunately, research has mentioned that older users often face challenges in using them. Although some papers have created guidelines for designing interfaces for the elderly, these applications are still focused on developing according to the need of young people. In addition, the aging of adults increases their chances of facing some difficulties. Therefore, this thesis aims to give a better understanding of the interface of the mobile instant messaging (MIM) application preferred by its users, specifically Indonesian users. By distributing an online-based survey to 150 Indonesian users of the MIM application, the preferences of several features in the message list and messaging interface of this application are collected. Then, the statistical analysis of the results found that the preferences of both users’ age groups differ. Among them are the button or icon each age group finds more suitable, the bottom bar in the messaging interface, and the placement of action options to be performed to the message they prefer most. Thus, this research also presents design recommendations that both younger and older users prefer. KW - Preference KW - Mobile Instant Messaging KW - User Interface KW - Indonesian user KW - Younger user KW - Older user Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus4-28675 ER - TY - THES A1 - Ney, Audrey T1 - E-Learning an der Technischen Hochschule Brandenburg – Bereitstellung eines hochschulweiten Weiterbildungsangebotes zu Themen der Informationskompetenz N2 - Die vorliegende Arbeit beschäftigt sich mit der Frage, wie ein E-Learning-Angebot an der Technischen Hochschule Brandenburg das Interesse am Thema der Informationskompetenz steigern sowie diese Kompetenzen entsprechend vermitteln kann. Der Fokus liegt dabei auf zwei quantitativen Umfragen, der Erstellung eines Kurses in Moodle sowie eine Handlungsempfehlung, um die Digitale Lehre an der THB und der Hochschulbibliothek weiter zu etablieren. KW - Digitale Lehre KW - E-Learning KW - Informationskompetenz KW - Hochschulbibliothek KW - Moodle Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus4-28711 ER - TY - CHAP ED - Wilms, Andreas ED - Hirsch, Sören T1 - 22. Nachwuchswissenschaftler*innenkonferenz (NWK) BT - 11. –13. Mai 2022, Brandenburg an der Havel T2 - Open Conference Proceedings (OCP) N2 - Unter dem Motto “Forschen – Vernetzen – Gestalten“ bietet die NWK Masterstudierenden, Promovierenden, sowie wissenschaftlichen Mitarbeiter:innen eine Plattform, ihre Projekte der angewandten Forschung und Entwicklung einem interessierten Fachpublikum zu präsentieren und in die Diskussion zu treten. Klimaschutz – digitale Transformation – Strukturwandel: Wir möchten gemeinsam mit Ihnen zentrale Herausforderungen unserer Zeit in den Fokus nehmen. Die Forschung an den Hochschulen leistet dabei wichtige praktische Arbeit. Wie tragen Ihre Forschungsergebnisse zur Lösung aktueller Probleme im Sinne einer nachhaltigen Entwicklung bei? Darum soll es beim interdisziplinären Austausch der 22. NWK gehen. Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus4-28755 SN - 2749-5841 PB - TIB Open Publishing CY - Hannover ET - 1 ER - TY - THES A1 - Ghulam Zada, Taj Mohammad T1 - Machine-Learning-basiertes Forecasting des Elektromobilitätshochlaufs in Deutschland N2 - Forecasting is an important decision-making tool for businesses, organizations, and governments because it saves a lot of resources. The forecast of the market share of new BEV car registrations in Germany can help efficiently evaluate strategic and future-oriented decisions, e.g., the climate targets set by the federal government. Machine learning methods were used to implement forecasting. Two machine learning models were used to forecast of the market share of new BEV car registrations in Germany: SARIMA(X) and DeepAR model. Due to variety in input datasets, four univariate and multivariate time series analysis models were trained. Afterwards, all four trained models were compared with each other using the RMSE metric. The last six months of the dataset were used to evaluate the model quality. The result of model comparison shows that SARIMAX model needs the exogenous variables to create a forecast of the multivariate data sets. However, the DeepAR model does not require any exogenous variables to generate forecast. Furthermore, if the input dataset contains at least 300 observations, then the implementation of DeepAR model is much more advantageous than SARIMA(X) model. DeepAR model not only supports the univariate and multivariate datasets, but also creates a global model that generates a forecast per variable. This is a great advantage over the SARIMA(X) model, which is not capable of this. N2 - Forecasting ist eine wichtige Methode zur Entscheidungsfindung für Unternehmen, Organisationen und Regierungen, da so der Ressourcenverbrauch reduziert werden kann. Der Forecast des prozentualen Marktanteils der neuen BEV-PKW-Zulassungen in Deutschland kann helfen, um strategische und zukunftsorientierte Entscheidungen, z.B. die vom Bund gesetzten Klimaziele, besser steuern zu können. Zur Durchführung des Forecastings wurde der Einsatz unterschiedlicher Machine-Learning-Methoden ausgenutzt. Es wurden zwei Machine-Learning-Modelle für das Forecasting des prozentualen Marktanteils der BEV-PKW-Neuzulassungen in Deutschland verwendet: Die SARIMA(X)- und DeepAR-Modelle. Aufgrund der Unterschiede in den Eingabedatensätzen wurden vier Modelle der Univariate- und Multivariate- Zeitreihenanalyse trainiert. Mit Hilfe der RMSE-Fehlermetrik wurden die vier trainierten Modelle miteinander verglichen. Die letzten sechs Monate der Eingabedatensätze wurden zur Evaluierung der Modellqualität genutzt. Die Ergebnisse dieser Masterarbeit zeigen, dass das SARIMAX-Modell zur Erstellung einer Prognose der multivariaten Datensätze die exogenen Variablen benötigt. Allerdings braucht das DeepAR-Modell keine exogenen Variablen, um eine Prognose generieren zu können. Wenn der Eingabedatensatz mindestens 300 Zeitreihen beträgt, eignet sich das DeepAR-Modell besser als das SARIMA(X)-Modell. Das DeepAR-Modell unterstützt nicht nur die univariaten- und multivariaten Datensätze, sondern generiert auch ein globales Modell, wodurch eine Prognose je Variable erstellt wird. Das ist ein großer Vorteil gegenüber dem SARIMA(X)-Modell, welches dazu nicht in der Lage ist. KW - Forecasting KW - Time Series Analysis KW - SARIMA(X) KW - DeepAR KW - Hyperparameter Optimization KW - Battery Electric Vehicles (BEV), Elektromobilität Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus4-28784 ER - TY - THES A1 - Treffer, Angelika T1 - Design digitaler Lernmedien zur Quellenkompetenzvermittlung N2 - IK als Schlüsselkonzept in der Hochschulbildung beinhaltet neben anderen Fähigkeiten auch den Bereich der Quellenkompetenz. Diese beschreibt die Fähigkeit, Quellen hinsichtlich ihrer Qualität und ihrer Funktion kritisch zu bewerten. Um diese Fähigkeit zu verbessern, wurde das HUMAN-Modell von Baldarelli et al. entwickelt. Ziel dieser Arbeit ist es, dieses HUMAN-Modell in E-Learning-Modulen zur Informationskompetenzvermittlung digital umzusetzen und die Auswirkungen des neuen Ansatzes zu evaluieren. Zu diesem Zweck werden zunächst neue Lernmodule nach dem Human-Centered Design Ansatz entworfen und implementiert. Anschließend erfolgt die Evaluation des Moduls in einer Mixed-Methods-Untersuchung in zwei Bachelorseminargruppen zweier aufeinanderfolgender Jahrgänge, die abgesehen von den neuen Lernmodule ein vergleichbares Treatment erhalten. Basierend auf Pre- und Post-Tests, Leistungsnachweisen und der Moodle-Aktivität beider Gruppen soll gemessen werden, inwiefern sich die Leistung und die Performance durch den Einsatz des neuen Lernmoduls verändert haben. Die Ergebnisse zeigen, dass der Leistungszuwachs zwischen Pre- und Post-Test in der HUMAN-Gruppe leicht höher ist als in der Vergleichsgruppe, insbesondere in Bezug auf den Bereich Quellenbeurteilung. Weiterhin zeigt die Analyse des schriftlichen Leistungsnachweises, dass die wissenschaftliche Qualität der zitierten Quellen in der Literaturliste bei der HUMAN-Gruppe größer ist, auch wenn die Gesamtperformanz der Studierenden sich nicht verbessert hat. Zur weiteren Analyse wäre es sinnvoll, die Quellen- zusammensetzung der Studierenden in der Bachelorarbeit zu untersuchen, um auch langfristige Auswirkungen zu evaluieren. KW - Quellenkompetenzvermittlung KW - Lernmedien-Design KW - Informationskompetenz KW - Mediendesign KW - E-Learning Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus4-28961 ER - TY - JOUR A1 - Blasek, Katrin T1 - Haftung für KI – Zum Vorschlag der EU-Kommission JF - Datenschutz-Berater N2 - Zur Umsetzung ihres "digitalen Kompass 2030" hat die Kommission zwei weitere Rechtsakte vorgeschlagen. Die mehr als 30 Jahre alte Produkthaftungsrichtlinie soll revidiert und eine neue Richtlinie über die Haftung für künstliche Intelligenz erlassen werden. Damit soll die politisch gewünschte Etablierung von KI in der EU für Wirtschaft und Gesellschaft auch haftungsrechtlich abgesichert werden. Der Beitrag analysiert die Richtlinie über die Haftung für künstliche Intelligenz in ihrem Verhältnis zum Gesetz über künstliche Intelligenz und zur Produkthaftungsrichtlinie. KW - Datenschutz KW - Künstliche Intelligenz Y1 - 2022 SN - 0170-7256 IS - 11 SP - 299 EP - 302 PB - Deutscher Fachverlag ER - TY - CHAP A1 - Weingrill, Jörg A1 - Granzer, Thomas A1 - Weber, Michael A1 - Bittner, Wilbert A1 - Seehaus, Carlo A1 - Mettke, Jan T1 - New electronic brains for Halfmann telescopes T2 - Software and Cyberinfrastructure for Astronomy VII T3 - Proceedings of SPIE - 12189 KW - Telescopes KW - Calibration KW - Computer programming KW - Servomechanisms KW - Switches KW - Control systems Y1 - 2022 U6 - https://doi.org/10.1117/12.2629327 N1 - Event: SPIE Astronomical Telescopes + Instrumentation, 17-23 July 2022, Montréal, Québec, Canada SP - 176 EP - 186 PB - SPIE CY - Bellingham, Washington, USA ER - TY - CHAP A1 - Braubach, Lars A1 - Jander, Kai A1 - Pokahr, Alexander ED - Camacho, D. T1 - Macro Architecture for Microservices: Improving Internal Quality of Microservice Systems T2 - Intelligent Distributed Computing XIV. IDC 2021 Y1 - 2022 SN - 978-3-030-96626-3 (Print) U6 - https://doi.org/10.1007/978-3-030-96627-0_10 ER - TY - THES A1 - Rothenhäusler, Luis T1 - d3.js and its potential in data visualization N2 - Diese Arbeit gibt einen Einblick sowie eine Einschätzung eines Code-basierten Werkzeuges zur Datenvisualierung, der d3js bibliothek für JavaScript. Es werden nicht nur das Potential, sondern auch die Vor- und Nachteile evaluiert. Weiterhin wird eine Einschätzung gegeben, wann der Einsatz dieses Werkzeuges sinnvoll ist. Um diese Einschätzungen treffen zu können, werden einige Di- agramme, bezüglich der aktuellen Flüchtlichgssituation, die aufgrund des bewaffneten Ukrainekonfilktes besteht, erstellt. Dafür werden zunächst die nötigen Grundlagen erklärt. Dies umfasst sowohl Daten und Datentypen, als auch Diagramme und deren Aufbau. Abschließend werden die erstellten Diagramme, sowie d3js im Diskussionsteil ausgewertet. Da d3js in reinem JavaScript implementiert ist, lässt es sich problem- los mit anderen Frameworks kombinieren. Der Fokus von d3js liegt auf der schnellen und einfachen Manipulation von Elementen im Document Object Model. d3js ist jedoch kein Werkzeug, mit dem in wenigen Zeilen Quell- code ganze Diagramme erstellt werden können. Vielmehr müssen sowohl die einzelnen Elemente eines Diagrammes, wie auch deren Position und Ausse- hen händisch definiert werden. Das ermöglicht ein Höchstmaß an Kontrolle über das Aussehen und Verhalten der Diagramme. Es ist jedoch auch zeitin- tensiv und führt eventuell zur Implementation unübersichtlicher Diagramme. Gepaart mit der hohen initialen Lernkurve kann die Nutzung von d3js nur in speziellen Fällen, welche die volle Kontrolle über Aussehen und Verhalten von Diagrammen benötigen, empfohlen werden. Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus4-28536 ER - TY - THES A1 - Diel, Alexander T1 - Vergleich moderner Frontend-Technologien zur Erstellung von Single-Page-Webanwendungen N2 - In der heutigen Zeit finden Single-Page-Webanwendung immer mehr Verwendung. Entsprechend dieser Entwicklung wurden Technologien, zur Erstellung von Single-Page-Webanwendungen, angefertigt. Um ihre Unterschiede und individuellen Anwendungsmöglichkeiten zu ermitteln, wurde mit den drei populärsten Technologien eine Webanwendung gebaut und eine Evaluation anhand einer Reihe von Kriterien durchgeführt. Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus4-28656 ER - TY - JOUR A1 - Kraska, Martin T1 - Meclib: Dynamic and Interactive Figures in STACK Questions Made Easy JF - International Journal of Emerging Technologies in Learning (iJET) N2 - Making and interpretation of drawings and schematics is an important skill to be developed in engineering education. The question type STACK in the Moodle learning management system combined with the interactive graphics library JSXGraph has a great potential for implementation of e-learning resources addressing these skills in formative and summative settings. The authoring process of such materials is complex due to multiple markup and programming languages like HTML, LaTeX, Maxima and JavaScript (JS) being involved. The Meclib concept mitigates this complexity and allows for efficient bulk production of material with consistent appearance and user experience. The core of Meclib is a set of pre-defined JSXGraph-based objects with an interface to Maxima, such that no problem specific JS code is required at all. The present paper outlines the basic ideas of the implementation and demonstrates the approach for some typical examples of different complexity. The focus is on applications in engineering mechanics, starting from static illustrations up to an editor for free body diagrams, with rich adaptive formative feedback. Y1 - 2022 UR - https://online-journals.org/index.php/i-jet/article/view/36501 U6 - https://doi.org/10.3991/ijet.v17i23.36501 SN - 1863-0383 VL - 17 IS - 23 SP - 15 EP - 27 PB - International Association of Online Engineering ER - TY - JOUR A1 - Schnitzer, Julia A1 - Kodalle, Micha T1 - Brain computer interface (BCI) - UX-design for visual and non-visual interaction by mental commands in the context of technical possibilities JF - Electronic imaging JF - IS&T International Symposium on Electronic Imaging : Mobile Devices and Multimedia: Enabling Technologies, Algorithms, and Applications, 2022 N2 - How do we interact with the digital world in the future by only using our thoughts to interact? To interact with the digital world, we use gestures (most common: swipe gestures), voice, facial expressions and mental commands. The latter has become more important by recent press releases about scientific achievements, for example, from Neuralink [1] using invasive technology to control a computer game by thoughts only [2]. Another study says an application can display text on a screen by just thinking about a word [3]. Currently, BCIs are mainly developed for neurotechnology and healthcare. However, it is a question of time when these services will be available for commercial products for everyday life. (Until then, manufacturers have to minimize health risks and face privacy and safety regulations.) The thesis is that in the future, you will be able to interact with your digital devices just by using your thoughts and you’ll do much faster. This makes sense in many situations where you f. e. do not have a free hand (manufacturing, sports) or cannot speak (underwater). But for such services, you cannot rely on conventional visual design guidelines or interaction patterns, frameworks or libraries. Navigation interacting with a digital service by mental command has a lot of advantages, the human brain comes naturally with some specific features that force us to find a radically new way to interact with digital interfaces. The following study introduces you first into working conditions with mental commands, comparing invasive and non-invasive technologies, and later on comparing several possibilities of interaction patterns for a BCI of everyday usage. [1] Neuralink is a US neurotechnology company founded in July 2016 by Elon Musk and eight other persons. Neuralink’s goal is to develop a device for communication between human brain and computers, a so-called brain-computer-interface(BCI). [2] The Guardian, Fr. 9th April 2021 “Elon Musk startup shows monkey with brain chip implants playing video game”. https://www.theguardian.com/technology/2021/apr/09/elon-musk- neuralink-monkey-video-game . [3] Scientific American, 15th July 2021, Neuroscience, author Emily Willingham: “New Brain Implant Transmits Full Words from Neural Signals”. Y1 - 2022 UR - https://library.imaging.org/ei/articles/34/3/MOBMU-402 SN - 2470-1173 VL - 34 IS - 3 SP - 402-1 EP - 402-8 PB - Society for Imaging Science and Technology ER - TY - JOUR A1 - Tumarkin, Andrey A1 - Tyurnina, Natalya A1 - Mukhin, Nikolay A1 - Tyurnina, Zoya A1 - Sinelshchikova, Olga A1 - Gagarin, Alexander A1 - Sapego, Eugeny A1 - Kretser, Yriy T1 - Glass-ceramic ferroelectric composite material BaTiO3/KFeSi for microwave applications JF - Composite Structures N2 - Glass-ceramic composites consisting of potassium-iron-silicate glass and barium titanate mixed in various proportions were successfully synthesized by low-temperature sintering. The crystal structure of the obtained composite samples, the porosity and the microhardness were studied by the X-ray diffraction, the electron microscopy, the weight method, and the Vickers method. Electrical characteristics (dielectric permittivity, tunability and losses) of as-prepared and annealed in oxygen medium samples were investigated at microwaves. According to structural analysis, the synthesized samples are a mixture of KFeSi glass, ferroelectric BaTiO3, and dielectric barium polytitanates; the ratio of the latter determines the electrical properties of the composites. Depending on the content of barium titanate, the studied composite samples show a permittivity from 50 to 270 with a dielectric loss level of 0,1–0,02 in frequency range from 3 to 10 GHz. Annealing of composite samples in an oxygen-containing environment leads to an increase in their dielectric permittivity and tunability by 10–25% and a twofold decrease in dielectric loss. Y1 - 2022 UR - https://linkinghub.elsevier.com/retrieve/pii/S0263822321014161 SN - 0263-8223 VL - 281 SP - 1 EP - 10 PB - Elsevier ER - TY - JOUR A1 - Kombe, Emmanuel Yeri A1 - Lang'at, Nickson A1 - Njogu, Paul A1 - Malessa, Reiner A1 - Weber, Christian-Toralf A1 - Njoka, Francis A1 - Krause, Ulrich T1 - Process modeling and evaluation of optimal operating conditions for production of hydrogen-rich syngas from air gasification of rice husks using aspen plus and response surface methodology JF - Bioresource Technology N2 - Biomass gasification is recognized as a viable avenue to accelerate the sustainable production of hydrogen. In this work, a numerical simulation model of air gasification of rice husks is developed using the Aspen Plus to investigate the feasibility of producing hydrogen-rich syngas. The model is experimentally validated with rice husk gasification results and other published studies. The influence of temperature and equivalence ratio on the syngas composition, H2 yield, LHVSyngas, H2/CO ratio, CGE, and PCG was studied. Furthermore, the synchronized effects of temperature and ER are studied using RSM to determine the operational point of maximizing H2 yield and PCG. The RSM analysis results show optimum performance at temperatures between 820 °C and 1090 °C and ER in the range of 0.06–0.10. The findings show that optimal operating conditions of the gasification system can be achieved at a more refined precision through simulations coupled with advanced optimization techniques. Y1 - 2022 UR - https://linkinghub.elsevier.com/retrieve/pii/S096085242201063X SN - 0960-8524 VL - 361 SP - 1 EP - 11 PB - Elsevier ER - TY - JOUR A1 - Ruzankina, Iuliia A1 - Mukhin, Nikolay A1 - Mermoul, Ali A1 - Parfenov, Vadim A1 - Fron, Eduard A1 - Ferrini, Gabriele T1 - Surface optical sensitivity enhanced by a single dielectric microsphere JF - Optics Express N2 - Single dielectric microspheres can manipulate light focusing and collection to enhance optical interaction with surfaces. To demonstrate this principle, we experimentally investigate the enhancement of the Raman signal collected by a single dielectric microsphere, with a radius much larger than the exciting laser spot size, residing on the sample surface. The absolute microsphere-assisted Raman signal from a single graphene layer measured in air is more than a factor of two higher than that obtained with a high numerical aperture objective. Results from Mie’s theory are used to benchmark numerical simulations and an analytical model to describe the isolated microsphere focusing properties. The analytical model and the numerical simulations justify the Raman signal enhancement measured in the microsphere-assisted Raman spectroscopy experiments. Y1 - 2022 UR - https://doi.org/10.1364/OE.472720 VL - 30 IS - 24 SP - 43021 EP - 43036 PB - Optica ER - TY - JOUR A1 - Hasche, Eberhard A1 - Karaschewski, Oliver A1 - Creutzburg, Reiner ED - Society for Imaging Science and Technology, T1 - RAW images and videos for 30K panoramic projection using the ACES workflow JF - Electronic Imaging Y1 - 2022 UR - https://library.imaging.org/ei/articles/34/3/MOBMU-400 U6 - https://doi.org/10.2352/EI.2022.34.3.MOBMU-400 SN - 2470-1173 IS - 34 SP - 400-1 EP - 400-13 PB - Society for Imaging Science and Technology ER - TY - CHAP A1 - Creutzburg, Reiner A1 - Hagen, Dirk A1 - Hasche, Eberhard ED - Agaian, Sos ED - Jassim, Sabah ED - DelMarco, Stephen ED - Asari, Vijayan K. T1 - Potentials and challenges for mega events: mobile devices usability for virtual reality, augmented reality, and visual effects T2 - Konferenz: Multimodal Image Exploitation and Learning 2022, Orlando, United States, 2022/ Koferenzband: Multimodal Image Exploitation and Learning 2022 Y1 - 2022 UR - https://www.spiedigitallibrary.org/conference-proceedings-of-spie/PC12100/2618822/Potentials-and-challenges-for-mega-events--mobile-devices-usability/10.1117/12.2618822.full SN - 978-1-5106-5617-8 U6 - https://doi.org/10.1117/12.2618822 PB - SPIE - The International Society for Optics and Photonics CY - Orlando, United States ER - TY - JOUR A1 - Creutzburg, Reiner A1 - Hagen, Dirk A1 - Hasche, Eberhard T1 - Application scenarios and usability for modern 360 degree video projection rooms in the MICE industry JF - Electronic Imaging N2 - 360-degree image and movie content has gained popularity over the media and the MICE (Meeting, Incentive, Conventions, and Exhibitions) industry in the last few years. There are three main reasons for this development. First, on the one hand, it is the immersive character of this media form, and, on the other hand, the development of recording and presentation technology has made significant progress in terms of resolution and quality. Third, after a decade of dynamic rising, the MICE Industry focuses on a disruptive change for more digital-based solutions. 360-degree panoramas are particularly widespread in VR and AR technology. However, despite the high immersive potential, these forms of presentation have the disadvantage that the users are isolated and have no social contact during the performance. Therefore, efforts have been made to project 360-degree content in specially equipped rooms or planetariums to enable a shared experience for the audience. One application area for 360-degree panoramas and films is conference rooms in hotels, conference centers, and any other venues that create an immersive environment for their clients to stimulate creativity. This work aims to overview the various application scenarios and usability possibilities for such conference rooms. In particular, we consider applications in construction, control, tourism, medicine, art exhibition, architecture, music performance, education, partying, organizing and carrying out events, and video conferencing. These applications and use scenarios were successfully tested, implemented, and evaluated in the 360-degree conference room “Dortmund” in the Hotel Park Soltau in Soltau, Germany. Finally, the advantages, challenges, and limitations of the proposed method are described. Y1 - 2022 UR - https://library.imaging.org/ei/articles/34/3/MOBMU-401 U6 - https://doi.org/10.2352/EI.2022.34.3.MOBMU-401 SN - 2470-1173 N1 - Band:34 IS - 3 SP - 401 - 1 EP - 401 - 9 PB - Society for Imaging Science and Technology (IS&T) ER - TY - CHAP A1 - Wrobel, Martin A1 - Hölzner, Heike M. A1 - Nicolai, Alexander T. T1 - The power of images: Metaphors that drive start-up collaborations T2 - G-Forum Tagungsband 2022 Y1 - 2022 UR - https://www.fgf-ev.de/g-forum-2022-in-dresden/ SP - 1 EP - 19 PB - G-Forum 2022 ER - TY - CHAP A1 - Seyerlein-Klug, Annegrit A1 - Deussen, Peter ED - Wahlster, Wolfgang ED - Winterhalter, Christoph T1 - 4.1.: Grundlagen T2 - Deutsche Normungsroadmap Künstliche Intelligenz Y1 - 2022 SP - 57 EP - 102 PB - DKE - Deutsche Kommission Elektrotechnik Elektronik Informationstechnik in DIN und VDE CY - Berlin/Offenbach am Main ET - 2 ER - TY - CHAP A1 - Grunwald, Guido A1 - Schwill, Jürgen A1 - Sassenberg, Anne-Marie T1 - How to Choose the Fitting Partner in Sustainability Sponsorship? A Decision Model Integrating Multiple Fit Dimensions T2 - Konferenz: 2021 AMS Virtual Annual Conference and World Marketing Congress, 2022/ Band: Celebrating the Past and Future of Marketing and Discovery with Social Impact 2021 AMS Virtual Annual Conference and World Marketing Congress Y1 - 2022 SN - 978-3-030-95345-4 U6 - https://doi.org/10.1007/978-3-030-95346-1_157 SP - 465 EP - 477 PB - Springer Cham ER - TY - CHAP A1 - Creutzburg, Reiner A1 - Hagen, Dirk A1 - Hasche, Eberhard ED - Agaian, Sos ED - Jassim, Sabah ED - DelMarco, Stephen ED - Asari, Vijayan K. T1 - Application scenarios and usability for modern 360 degree video projection rooms in modern meeting, incentive, conventions, and exhibitions (MICE) industry T2 - Konferenz: SPIE Defence and Commercial Sensing Industry, Orlando, United States, 2022/ Band: PROCEEDINGS VOLUME PC12100 SPIE DEFENSE + COMMERCIAL SENSING | 3 APRIL - 13 JUNE 2022 Multimodal Image Exploitation and Learning 2022 Y1 - 2022 UR - https://www.spiedigitallibrary.org/conference-proceedings-of-spie/PC12100/2618848/Application-scenarios-and-usability-for-modern-360-degree-video-projection/10.1117/12.2618848.full SN - 978-1-5106-5617-8 U6 - https://doi.org/10.1117/12.2618848 PB - SPIE - The International Society for Optics and Photonics CY - Orlando, United States ER - TY - JOUR A1 - Blasek, Katrin T1 - Auskunfteiwesen und Kreditscoring in unruhigem Fahrwasser JF - Zeitschrift für Datenschutz Y1 - 2022 UR - https://beck-online.beck.de/Dokument?vpath=bibdata%2Fzeits%2Fzd%2F2022%2Fcont%2Fzd.2022.433.1.htm&pos=1&hlwords=on SN - 2192-5593 IS - 8 SP - 433 EP - 438 PB - C.H.Beck ER - TY - BOOK A1 - Grunwald, Guido A1 - Schwill, Jürgen T1 - Nachhaltigkeitsmarketing BT - Grundlagen - Gestaltungsoptionen - Umsetzung KW - Nachhaltigkeit KW - Marketingmanagement Y1 - 2022 SN - 978-3-7910-4927-4 (eBook) SN - 978-3-7910-4925-0 PB - Schäffer-Poeschel CY - Stuttgart ET - 1. Auflage ER - TY - JOUR A1 - Vollmer, Michael T1 - The evolution of IR imaging: What’s next? JF - Laser Focus World Magazine N2 - The vast majority of all human sensory inputs occur through our eyes. Light from direct sources or scattered light from objects enters our eyes and is focused onto the retina. The resulting signals are interpreted by the brain, which leads to the perception of the image of the observed objects. Although quite efficient for our daily life, many technological applications require sensor properties beyond the characteristics of our eyes. A major limitation regarding microscopic objects is spatial resolution, which is overcome by microscopes. Time resolution can be dealt with using either time-lapse or high-speed cameras. Finally, eyes only detect visible radiation within the wavelength range from about 380 nm to 780 nm. Changing the detected spectral range of electromagnetic radiation can dramatically enhance our vision. Shorter wavelengths such as x-rays are valuable tools for medical imaging, while ultraviolet (UV) imaging is used for forensics. Longer-wavelength thermal radiation used for imaging is often defined within spectral ranges, characterized by the photoelectric detector materials used and the respective atmospheric windows. Y1 - 2022 UR - https://www.laserfocusworld.com/detectors-imaging/article/14233175/the-evolution-of-ir-imaging-whats-next SP - 23 EP - 26 PB - endeavor business media ER - TY - CHAP A1 - Vollmer, Michael ED - Haglund, Jesper ED - Jeppsson, Fredrik ED - Schönborn, Konrad J. T1 - Fundamentals of Thermal Imaging T2 - Thermal Cameras in Science Education N2 - The quantitative explanation of thermal radiation in 1900 by Max Planck started a development, which today has resulted in modern infrared technologies with thermal imaging cameras. The present work briefly describes the fundamentals of infrared imaging, based on the fact, that every object at a temperature T > 0 K emits thermal radiation. Its amount is only governed by temperature and the material quantity emissivity. Factors that define types and properties of commercial IR cameras, such as temperature range in nature and industry, the atmospheric windows for IR radiation as well as available optics and detectors are discussed. A short summary of typical specifications of IR cameras and interpretation of recorded images is given. Y1 - 2022 U6 - https://doi.org/10.1007/978-3-030-85288-7_2 SP - 7 EP - 25 PB - Springer CY - Cham ER - TY - CHAP A1 - Vollmer, Michael ED - Haglund, Jesper ED - Jeppsson, Fredrik ED - Schönborn, Konrad J. T1 - Infrared Cameras as Smartphone Accessory: Qualitative Visualization or Quantitative Measurement? T2 - Thermal Cameras in Science Education N2 - Recently, infrared cameras have become available as smartphone accessories. Being less expensive than regular infrared cameras they are readily affordable and widespread use in the future is expected. Available commercial models are compared and examples for meaningful use and interpretation of respective qualitative images is given. The respective arguments also directly apply to other commonly used low-grade IR cameras with similar pixel resolution and frame rates. It is assumed that users know about the typical problems due to, e.g., thermal reflections. Rather than discussing those, focus is on the danger of wrong interpretations, in particular with regard to the low frame rate, the often implemented image processing within the cameras, the imposed restrictions on necessary input parameters, and the extremely limited spatial resolution and respective errors in potential quantitative analyses. Y1 - 2022 U6 - https://doi.org/10.1007/978-3-030-85288-7_9 SP - 129 EP - 145 PB - Springer CY - Cham ER - TY - CHAP A1 - Vollmer, Michael ED - Gómez-López, Vicente M. ED - Bhat, Rajeev T1 - Physics of the Electromagnetic Spectrum T2 - Electromagnetic Technologies in Food Science N2 - Electromagnetic (EM) waves, spanning about 15 orders of magnitude of wavelength (or frequency or energy) from radio waves via microwaves, infrared radiation, visible light, ultraviolet radiation, and X-rays to the highly energetic γ-rays, are utilized in food processing. In order to explain all uses of these waves in the food industry, the chapter begins with a general discussion of properties of waves and their description with wavelength frequency, speed of propagation, and also energy transport. Using visible light as starting point, electromagnetic waves in other wavelength regimes are discussed. The interaction of EM radiation with matter reveals that the wave description alone is insufficient to explain all observed phenomena. Understanding the attenuation of EM radiation in matter requires knowledge of the particle properties of electromagnetic waves, most easily summarized by the concept of photons which carry energy as well as momentum. This wave–particle duality does apply not only to EM waves, i.e. photons, but also to the particles which build up matter, in particular electrons, which also need to be described as waves. This leads to respective quantum mechanical explanations of the microscopic structure of matter in the form of atoms, molecules, and nuclei. Knowledge of their structure is a prerequisite to understand, first, the generation of EM radiation and, second, also its interaction with matter. As a result, it will become obvious that there are mostly three different usages of EM radiation in the food industry: preserving, characterizing, and heating. Y1 - 2022 U6 - https://doi.org/10.1002/9781119759522.ch1 SP - 1 EP - 32 PB - Wiley CY - Chichester, UK ER - TY - CHAP A1 - Andreas, Johannsen A1 - Daniel, Kant ED - Weber, Kristin ED - Reinheimer, Stefan T1 - IT-Governance-, Risiko- und Compliance-Management (IT-GRC) – Ein kompetenzorientierter Ansatz für KMU T2 - Faktor Mensch N2 - Kleine und mittlere Unternehmen aller Branchen versuchen sich nach wie vor angemessen mit den Herausforderungen der Globalisierung und der digitalen Transformation auseinanderzusetzen. Sie bilden in diesem Zusammenhang wachsende Kompetenz in der Produktionsautomatisierung (Industrie 4.0) und in digitalen Geschäfts- und Verwaltungsprozessen aus. In Bezug auf IT-GRC bleiben KMU demgegenüber faktisch oft noch unreif. Bestehende Ansätze des IT-Governance-, Risiko- und Compliance-Managements sind noch zu wenig für KMU ausgestaltet. Das Kapitel stellt vor diesem Hintergrund einen zunächst aus der Literatur abgeleiteten, und dann zusammen mit Feedback von 14 IT-GRC Experten aufgestellten, kompetenzorientierten Ansatz zur Wahrnehmung und Messung des IT-Governance-, Risiko- und Compliance-Managements in KMU vor. Der Ansatz enthält sechs relevante Kompetenzkategorien. Das Kapitel stellt dann zwei abgeleitete, webbasierte Tools zur Messung und Erfassung der Handlungsbedarfe und zur Unterstützung von Management-Maßnahmen vor. Der Ansatz sowie die prototypisch realisierten Tools unterstützen das IT-GRC-Management von KMU gemäß ihrem Reifegrad und bedarfsorientiert. Bei der Unterstützung wird der Fokus darauf gelegt, KMU bei der Umsetzung der ständig wachsenden IT-GRC-Anforderungen schlanke und konkrete Methoden, Werkzeuge und Hilfsmittel an die Hand zu geben und die verschiedenen Stakeholder einzubinden. KW - Klein- und Mittelbetrieb KW - Governance KW - Computersicherheit Y1 - 2022 U6 - https://doi.org/10.1007/978-3-658-34524-2_15 SP - 275 EP - 294 PB - Springer Vieweg CY - Wiesbaden ER - TY - JOUR A1 - Wang, Jing A1 - Harth, Kirsten A1 - Puzyrev, Dmitry A1 - Stannarius, Ralf T1 - The effect of obstacles near a silo outlet on the discharge of soft spheres JF - New Journal of Physics KW - fluid dynamics Y1 - 2022 U6 - https://doi.org/10.1088/1367-2630/ac8bea VL - 24 PB - IOP ER - TY - JOUR A1 - Missaoui, Amine A1 - Harth, Kirsten A1 - Trittel, Torsten A1 - Klopp, Christoph A1 - Stannarius, Ralf A1 - Lacaze, Emanuelle T1 - Shape instabilities of islands in smectic films under lateral compression JF - Soft Matter Y1 - 2022 U6 - https://doi.org/10.1039/D2SM00144F SN - 1744-6848 VL - 16 SP - 3193 EP - 3205 PB - Royal Society of Chemistry ER - TY - JOUR A1 - Klopp, Christoph A1 - Trittel, Torsten A1 - Harth, Kirsten A1 - Stannarius, Ralf T1 - Smectic free-standing films under fast lateral compression JF - Soft Matter N2 - Smectic films in a collapsing catenoid develop spontaneous wrinkling patterns like solid sheets. Smectic freely-suspended films can wrinkle like solid sheets. This has been demonstrated earlier with shape-fluctuating smectic bubbles. Here, we exploit the collapse of smectic catenoid films with a central equatorial film to expose the latter to rapid lateral compression. Wrinkle formation is observed in the planar film and the thickness dependence of the undulation wavelength is measured. In addition to the central film, its border undergoes an undulation instability as well. Y1 - 2022 UR - http://xlink.rsc.org/?DOI=D1SM01207J U6 - https://doi.org/10.1039/D1SM01207J SN - 1744-683X, 1744-6848 SP - 146 EP - 155 PB - Royal Society of Chemistry ER - TY - JOUR A1 - Chaurasia, Prashtan Kumar A1 - Goecke, Sven-Frithjof A1 - De, Amitava T1 - Real-time monitoring of temperature field, metal transfer and cooling rate during gas metal arc-directed energy deposition JF - Science and Technology of Welding and Joining Y1 - 2022 U6 - https://doi.org/10.1080/13621718.2022.2080447 SN - 13621718 IS - 27 SP - 512 EP - 521 PB - Taylor & Francis ER - TY - JOUR A1 - Kuznetsov, Artur A1 - Frorip, Aleksandr A1 - Sünter, Alar A1 - Korsakov, Vadim A1 - Konoplev, Georgii A1 - Stepanova, Oksana A1 - Roschina, Natalia A1 - Ovsyannikov, Nikolay A1 - Lialin, Daniil A1 - Gerasimchuk, Roman A1 - Dmitriev, Alexander A1 - Mukhin, Nikolay A1 - Hirsch, Sören T1 - Optical Chemical Sensor Based on Fast-Protein Liquid Chromatography for Regular Peritoneal Protein Loss Assessment in End-Stage Renal Disease Patients on Continuous Ambulatory Peritoneal Dialysis JF - Chemosensors KW - optical chemical sensor KW - fast-protein liquid chromatography KW - UV LED KW - end-stage renal disease KW - peritoneal dialysis KW - peritoneal protein loss KW - albumin KW - point-of-care diagnostic devices Y1 - 2022 U6 - https://doi.org/10.3390/chemosensors10060232 VL - 10 IS - 6 PB - MDPI ER - TY - JOUR A1 - Konoplev, Georgii A1 - Agafonova, Darina A1 - Bakhchova, Liubov A1 - Mukhin, Nikolay A1 - Kurachkina, Marharyta A1 - Schmidt, Marc-Peter A1 - Verlov, Nikolay A1 - Sidorov, Alexander A1 - Oseev, Aleksandr A1 - Stepanova, Oksana A1 - Kozyrev, Andrey A1 - Dmitriev, Alexander A1 - Hirsch, Sören T1 - Label-Free Physical Techniques and Methodologies for Proteins Detection in Microfluidic Biosensor Structures JF - Biomedicines KW - label-free biosensor KW - microfluidics KW - proteins detection KW - optical biosensors KW - impedance spectroscopy KW - plasmon resonance KW - point-of-care KW - diagnostic devices Y1 - 2022 U6 - https://doi.org/10.3390/biomedicines10020207 SN - 2227-9059 VL - 10 IS - 2 SP - 207 PB - MDPI ER - TY - JOUR A1 - Lamshöft, Kevin A1 - Neubert, Tom A1 - Hielscher, Jonas A1 - Vielhauer, Claus T1 - Knock, knock, log: Threat analysis, detection & mitigation of covert channels in syslog using port scans as cover JF - Forensic Science International: Digital Investigation Y1 - 2022 U6 - https://doi.org/10.1016/j.fsidi.2022.301335 SN - 2666-2817 VL - 40 PB - Elsevier ER - TY - CHAP A1 - Levina, Olga T1 - Transparency as a Potential Factor for Implementation of Machine Learning-based Systems T2 - AMCIS 2022 Proceedings KW - Machine learning based systems KW - transparency KW - technology acceptance model KW - empirical study KW - ethical implications Y1 - 2022 UR - https://aisel.aisnet.org/amcis2022/sig_dsa/sig_dsa/3 PB - AIS Electronic Library (AISeL) ER - TY - CHAP A1 - Kevin, Lamshöft A1 - Hildebrandt, Mario A1 - Altschaffel, Robert A1 - Keil, Oliver A1 - Hempel, Ivo A1 - Dittmann, Jana A1 - Neubert, Tom A1 - Vielhauer, Claus T1 - Resilience against and detection of information hiding in nuclear instrumentation and control systems within the scope of NSS 17-T T2 - Kerntechnik 2022, Leipzig, 21. - 22. Juni 2022 Y1 - 2022 UR - https://www.kerntechnik.com PB - INFORUM Verlags- und Verwaltungsgesellschaft mbH CY - Berlin ER - TY - CHAP A1 - Neubert, Tom A1 - Caballero Morcillo, Antonio José A1 - Vielhauer, Claus T1 - Improving Performance of Machine Learning based Detection of Network Steganography in Industrial Control Systems T2 - ARES 2022: The 17th International Conference on Availability, Reliability and Security Vienna Austria August 23 - 26, 2022 KW - machine learning KW - forensic detection KW - steganography KW - information/data hiding KW - advanced persistent threats Y1 - 2022 U6 - https://doi.org/10.1145/3538969.3544427 SP - 1 EP - 8 PB - Association for Computing Machinery CY - New York, NY ER - TY - CHAP A1 - Kant, Daniel A1 - Johannsen, Andreas T1 - Evaluation of AI-based use cases for enhancing the cyber secu- rity defense of small and medium-sized companies (SMEs) T2 - Proc. IS & T International Symposium on Electronic Imaging: Mobile Devices and Multimedia: Enabling Technologies, Algorithms, and Applications KW - Cyber defense KW - cyber security KW - artificial intelligence KW - defensive AI KW - cyber security applications KW - cyber security use cases KW - security use cases KW - AI-based security applications KW - SME Y1 - 2022 U6 - https://doi.org/10.2352/EI.2022.34.3.MOBMU-387 SP - 387-1 EP - 387-8 CY - Springfield, VA ER - TY - CHAP A1 - Ezennaya-Gomez, Salatiel A1 - Vielhauer, Claus A1 - Dittmann, Jana ED - Katsikas, Sokratis ED - Lambrinoudakis, Costas ED - Cuppens, Nora ED - Mylopoulos, John ED - Kalloniatis, Christos ED - Meng, Weizhi ED - Furnell, Steven ED - Pallas, Frank ED - Pohle, Jörg ED - Sasse, M. Angela ED - Abie, Habtamu ED - Ranise, Silvio ED - Verderame, Luca ED - Vidal, Jorge Maestre ED - Cambiaso, Enrico ED - Monge, Marco Antonio Sotelo T1 - A Semantic Model for Embracing Privacy as Contextual Integrity in the Internet of Things T2 - European Symposium on Research in Computer Security, Cham, 2022 Konferenzband: Computer Security. ESORICS 2021 International Workshops N2 - Due to the increasing number of complaints alleging privacy violations against companies to data protection authorities, the translation of business goals to system design goals and the subsequent consequences for customers’ privacy poses a challenge for many companies. For this reason, there is a need to bridge the economics of privacy and threats to privacy. To this end, our work relies on the concept of privacy as contextual integrity. This framework defines privacy as appropriate information flows subjected to social norms within particular social contexts or spheres. In this paper, we introduce a preliminary version of a semantic model which aims to relate and provide understanding on how well-established business goals may affect their customers’ privacy by designing IoT devices with permission access, data acquired by sensors, among other factors. Finally, we provide a use case application showing how to use the semantic model. The model aims to be an educational tool for professionals in business informatics during the modeling and designing process of a product which may gather sensitive data or may infer sensitive information, giving an understanding of the interaction of the product and its footprint with diverse actors (humans or machines). In the future, a further complete model of the presented may also target other groups, such as law enforcement bodies, as part of their educational training in such systems. T3 - Lecture notes in computer science - 13106 Y1 - 2022 UR - https://link.springer.com/10.1007/978-3-030-95484-0_24 SN - 978-3-030-95483-3 978-3-030-95484-0 U6 - https://doi.org/10.1007/978-3-030-95484-0_24 IS - 13106 SP - 413 EP - 423 PB - Springer CY - Cham ER -