TY - JOUR A1 - Richter, Maximilian A1 - Schwarz, Klaus A1 - Creutzburg, Reiner T1 - Conception and Implementation of Professional Laboratory Exercises in the field of ICS/SCADA Security Part II: Red Teaming and Blue Teaming JF - Electronic Imaging KW - Blue Team KW - Censys KW - Maltego KW - OSINT KW - Red Team KW - Shodan KW - cybersecurity KW - open source intelligence Y1 - 2021 U6 - https://doi.org/10.2352/ISSN.2470-1173.2021.3.MOBMU-074 SN - 2470-1173 SP - 74-1 EP - 74-13 PB - Society for Imaging Science and Technology CY - Springfield, VA ER - TY - JOUR A1 - Hasche, Eberhard A1 - Karaschewski, Oliver A1 - Creutzburg, Reiner T1 - Using ACES Look Modification Transforms (LMTs) in VFX Environments – Part 2: Gamut Mapping JF - Electronic Imaging KW - 3ARRI footage KW - ACES KW - VFX KW - color gamut KW - color management KW - color spaces KW - tone mapping Y1 - 2021 U6 - https://doi.org/10.2352/ISSN.2470-1173.2021.3.MOBMU-108 SN - 2470-1173 SP - 108-1 EP - 108-14 PB - Society for Imaging Science and Technology CY - Springfield, VA ER - TY - JOUR A1 - John, Stefanie A1 - Weizel, David A1 - Heumann, Anna Sophie A1 - Fischer, Anja A1 - Orlowski, Katja A1 - Mrkor, Kai-Uwe A1 - Edelmann-Nusser, Jürgen A1 - Witte, Kerstin T1 - Persisting inter‐limb differences in patients following total hip arthroplasty four to five years after surgery? A preliminary cross‐sectional study JF - BMC Musculoskelet Disorders KW - Gait KW - Inter-limb difference KW - Muscle strength KW - Range of motion KW - Balance KW - Total hip arthroplasty Y1 - 2021 U6 - https://doi.org/10.1186/s12891-021-04099-7 SN - 1471-2474 VL - 22 PB - BioMed Central ER - TY - JOUR A1 - Mukhin, Nikolay A1 - Konoplev, Georgii A1 - Oseev, Aleksandr A1 - Schmidt, Marc-Peter A1 - Stepanova, Oksana A1 - Kozyrev, Andrey A1 - Dmitriev, Alexander A1 - Hirsch, Soeren T1 - Label-Free Protein Detection by Micro-Acoustic Biosensor Coupled with Electrical Field Sorting. Theoretical Study in Urine Models JF - Sensors KW - acoustic liquid sensor KW - shear bulk acoustic resonator KW - biosensor KW - structured sensor interface KW - electrical field manipulation KW - urine proteins characterisation Y1 - 2021 U6 - https://doi.org/10.3390/s21072555 VL - 21 IS - 7 SP - 2555 PB - MDPI ER - TY - JOUR A1 - Grunwald, Guido A1 - Schwill, Jürgen A1 - Sassenberg, Anne-Marie T1 - Sustainability project partnerships in times of crisis: conceptual framework and implications for stakeholder integration JF - Journal of Entrepreneurship and Public Policy KW - Sustainability project partnership KW - Stakeholder integration KW - Sustainability crisis KW - Corporate social responsibility KW - Relationship management KW - Stakeholder management KW - Sustainability marketing Y1 - 2021 U6 - https://doi.org/10.1108/JEPP-04-2021-0044 SN - 2045-2101 VL - 10 IS - 3 SP - 352 EP - 378 PB - Emerald ER - TY - JOUR A1 - Rojek, Lukasz A1 - Islam, Saiful A1 - Hartmann, Michael A1 - Creutzburg, Reiner T1 - IoT-Based Real-Time Monitoring System for a Smart Energy House JF - Electronic Imaging KW - AI KW - Raspberry Pi KW - low cost sensors KW - monitoring KW - networking KW - real-time KW - smart energy house KW - smart home Y1 - 2021 U6 - https://doi.org/10.2352/ISSN.2470-1173.2021.3.MOBMU-038 SN - 2470-1173 SP - 38-1 EP - 38-10 PB - Society for Imaging Science and Technology CY - Springfield, VA ER - TY - JOUR A1 - Rizun, Nina A1 - Revina, Aleksandra A1 - Meister, Vera G. T1 - Assessing business process complexity based on textual data: Evidence from ITIL IT ticket processing JF - Business Process Management Journal KW - Business process management KW - Business process complexity KW - Natural language processing KW - Situation awareness KW - Decision support KW - ITIL IT ticket Y1 - 2021 U6 - https://doi.org/10.1108/BPMJ-04-2021-0217 SN - 1758-4116 VL - 27 IS - 7 SP - 1966 EP - 1998 PB - Emerald ER - TY - JOUR A1 - Revina, Aleksandra A1 - Aksu, Ünal A1 - Meister, Vera G. T1 - Method to Address Complexity in Organizations Based on a Comprehensive Overview JF - Information 2021 KW - organizational complexity KW - technological complexity KW - textual complexity KW - morphological box KW - goal question metric Y1 - 2021 U6 - https://doi.org/10.3390/info12100423 VL - 12 IS - 10 SP - 423 PB - MDPI ER - TY - JOUR A1 - Kramann, Guido T1 - Composing by Laypeople: A Broader Perspective Provided by Arithmetic Operation Grammar JF - Computer Music Journal Y1 - 2021 U6 - https://doi.org/10.1162/comj_a_00550 VL - 44 IS - 1 SP - 17 EP - 34 PB - MIT Press ER - TY - JOUR A1 - Vollmer, Michael T1 - Gefrierende Gewässer JF - Physik in unserer Zeit KW - Gefrieren von Seen KW - Eiswachstumsmodell KW - Konvektion KW - Strahlung KW - Stefan-Boltzmann-Gesetz KW - Wärmeleitfähigkeit KW - optische Eisdickenmessung Y1 - 2021 U6 - https://doi.org/10.1002/piuz.202001589 VL - 52 IS - 1 SP - 19 EP - 25 PB - Wiley-Blackwell ER - TY - JOUR A1 - Kant, Daniel A1 - Johannsen, Andreas A1 - Creutzburg, Reiner T1 - Analysis of IoT Security Risks based on the exposure of the MQTT Protocol JF - Electronic Imaging KW - Internet of Things KW - Industrial Internet of Thing KW - IoT KW - IIoT KW - MQTT KW - IoT protocol KW - IIoT protocol KW - IoT security KW - IIoT security KW - MQTT vulnerability Y1 - 2021 UR - https://itwirtschaft.de/wp-content/uploads/2021/02/2021_Electronic-Imaging_IoT_Security-BASIC-1.pdf U6 - https://doi.org/10.2352/ISSN.2470-1173.2021.3.MOBMU-096 N1 - Paper was created within the German program "Mittelstand (SME) 4.0 - Competence Center for IT Economy" of the Ministry for Economic Affairs and Energy VL - 33 SP - 096-1 EP - 096-8 PB - Society for Imaging Science and Technology ER - TY - CHAP A1 - Levina, Olga T1 - Towards Implementation of Ethical Issues into the Recommender Systems Design T2 - ICCGI 2021, The Sixteenth International Multi-Conference on Computing in the Global Information Technology, held in Nice, France during July 18 - 22, 2021 KW - socio-technical systems KW - information systems design KW - machine learning based systems KW - ethical analysis Y1 - 2021 UR - https://www.researchgate.net/profile/Olga-Levina-2/publication/353175785 PB - IARIA ER - TY - JOUR A1 - Das, Atanu A1 - Goecke, Sven-Frithjof A1 - De, Amitava T1 - Joining of aluminium alloy and galvanized steel sheets multimaterial assembly using a gas metal arc based process JF - Tecnologia em Matalurgia, Materiais e Mineração Y1 - 2021 U6 - https://doi.org/10.4322/2176-1523.20212464 SN - 2176-1515 (PRINT) 2176-1523 (ONLINE) N1 - Band: 18 PB - ABM - Associação Brasileira de Metalurgia, Materiais e Mineração ER - TY - JOUR A1 - Koldeweij, Robin B. J. A1 - Kant, Pallav A1 - Harth, Kirsten A1 - Ruiter, Rielle de A1 - Gelderblom, Hanneke A1 - Snoeijer, Jacco H. A1 - Lohse, Detlef A1 - Limbeek, Michiel A. J. van T1 - Initial solidification dynamics of spreading droplets JF - Physical Review Fluids N2 - When a droplet is brought in contact with an undercooled surface, it wets the substrate and solidifies at the same time. The interplay between the phase transition effects and the contact-line motion, leading to its arrest, remains poorly understood. Here we reveal the early solidification patterns and dynamics of spreading hexadecane droplets. Total internal reflection imaging is employed to temporally and spatially resolve the early solidification behavior. With this, we determine the conditions leading to the contact-line arrest. We quantify the overall nucleation behavior, i.e., the nucleation rate and the crystal growth speed and show its sensitivity to the applied undercooling of the substrate. We also show that for strong enough undercooling it is the rapid growth of the crystals which determines the eventual arrest of the spreading contact line. By combining the Johnson-Mehl-Avrami-Kolmogorov nucleation theory and scaling relations for the spreading, we calculate the temporal evolution of the solid area fraction, which is in good agreement with our observations. Y1 - 2021 UR - https://link.aps.org/doi/10.1103/PhysRevFluids.6.L121601 U6 - https://doi.org/10.1103/PhysRevFluids.6.L121601 SN - 2469-990X N1 - Band: 6 IS - 12 PB - American Physical Society ER - TY - CHAP A1 - Oertel, Christian T1 - Virtual Tires: Requirements, Fields of Application and Ways of Implementation T2 - Konferenz: 40th Annual Meeting and Conference on Tire Science & Technology: Conference Theme: The Virtual Tire, online, 2021 Y1 - 2021 SP - 1 EP - 18 PB - Tire Society CY - Online ER - TY - CHAP ED - Wilms, Andreas ED - Hirsch, Sören T1 - 22. Nachwuchswissenschaftler*innenkonferenz (NWK) BT - 11. –13. Mai 2022, Brandenburg an der Havel T2 - Open Conference Proceedings (OCP) N2 - Unter dem Motto “Forschen – Vernetzen – Gestalten“ bietet die NWK Masterstudierenden, Promovierenden, sowie wissenschaftlichen Mitarbeiter:innen eine Plattform, ihre Projekte der angewandten Forschung und Entwicklung einem interessierten Fachpublikum zu präsentieren und in die Diskussion zu treten. Klimaschutz – digitale Transformation – Strukturwandel: Wir möchten gemeinsam mit Ihnen zentrale Herausforderungen unserer Zeit in den Fokus nehmen. Die Forschung an den Hochschulen leistet dabei wichtige praktische Arbeit. Wie tragen Ihre Forschungsergebnisse zur Lösung aktueller Probleme im Sinne einer nachhaltigen Entwicklung bei? Darum soll es beim interdisziplinären Austausch der 22. NWK gehen. Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus4-28755 SN - 2749-5841 PB - TIB Open Publishing CY - Hannover ET - 1 ER - TY - THES A1 - Treffer, Angelika T1 - Design digitaler Lernmedien zur Quellenkompetenzvermittlung N2 - IK als Schlüsselkonzept in der Hochschulbildung beinhaltet neben anderen Fähigkeiten auch den Bereich der Quellenkompetenz. Diese beschreibt die Fähigkeit, Quellen hinsichtlich ihrer Qualität und ihrer Funktion kritisch zu bewerten. Um diese Fähigkeit zu verbessern, wurde das HUMAN-Modell von Baldarelli et al. entwickelt. Ziel dieser Arbeit ist es, dieses HUMAN-Modell in E-Learning-Modulen zur Informationskompetenzvermittlung digital umzusetzen und die Auswirkungen des neuen Ansatzes zu evaluieren. Zu diesem Zweck werden zunächst neue Lernmodule nach dem Human-Centered Design Ansatz entworfen und implementiert. Anschließend erfolgt die Evaluation des Moduls in einer Mixed-Methods-Untersuchung in zwei Bachelorseminargruppen zweier aufeinanderfolgender Jahrgänge, die abgesehen von den neuen Lernmodule ein vergleichbares Treatment erhalten. Basierend auf Pre- und Post-Tests, Leistungsnachweisen und der Moodle-Aktivität beider Gruppen soll gemessen werden, inwiefern sich die Leistung und die Performance durch den Einsatz des neuen Lernmoduls verändert haben. Die Ergebnisse zeigen, dass der Leistungszuwachs zwischen Pre- und Post-Test in der HUMAN-Gruppe leicht höher ist als in der Vergleichsgruppe, insbesondere in Bezug auf den Bereich Quellenbeurteilung. Weiterhin zeigt die Analyse des schriftlichen Leistungsnachweises, dass die wissenschaftliche Qualität der zitierten Quellen in der Literaturliste bei der HUMAN-Gruppe größer ist, auch wenn die Gesamtperformanz der Studierenden sich nicht verbessert hat. Zur weiteren Analyse wäre es sinnvoll, die Quellen- zusammensetzung der Studierenden in der Bachelorarbeit zu untersuchen, um auch langfristige Auswirkungen zu evaluieren. KW - Quellenkompetenzvermittlung KW - Lernmedien-Design KW - Informationskompetenz KW - Mediendesign KW - E-Learning Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus4-28961 ER - TY - JOUR A1 - Goschin, Tobias A1 - Vogel, Mathias A1 - Flassig, Robert T1 - Energy Technologies For Decarbonizing The Steel Processing Industry – A Numerical Study JF - IFAC-PapersOnLine N2 - This study analyzes approaches to decarbonize the energy supply of the secondary steel processing industry. Therefore, real data from a secondary steel production company is used in combination with state-of-the art low carbon energy supply technologies. Also, the use of waste heat from a pusher furnace for process integration is considered. The developed temporal process model allows holistic optimizing and expanding the steel making process system regarding techno-economic criteria. As we show, implementing the annual heat demand of a municipality shows that a nearly 100 % self-sufficient heat supply is possible. Y1 - 2022 UR - https://linkinghub.elsevier.com/retrieve/pii/S240589632200386X VL - 55 IS - 9 SP - 1 EP - 5 PB - Elsevier ER - TY - JOUR A1 - Vogel, Mathias A1 - Goschin, Tobias A1 - Flassig, Robert T1 - Techno-economic analysis of excess wind energy utilitzation in the energy supply of residential quarters JF - IFAC-PapersOnLine N2 - In this study we have examined the potential of excess wind use in Germany. Excess wind constitutes roughly 40% of unused capacities of installed wind power in Germany. Using LP modelling and representative annual load profiles on an hourly resolution, we investigate the impact of the price level for wind peak power supply of residential quarters with heat, cold and electricity in Germany in combination with different power ratios of wind supply and demand. As we show, an application of wind peak tariff is technically and economically feasible and allows using green leftover energy without going in competition with e.g., green fuels or green H2 production. Y1 - 2022 UR - https://linkinghub.elsevier.com/retrieve/pii/S2405896322004529 U6 - https://doi.org/10.1016/j.ifacol.2022.07.067 SN - 24058963 VL - 55 IS - 9 SP - 384 EP - 388 PB - Elsevier ER - TY - THES A1 - Becker, Josephine T1 - Konzeption und prototypische Entwicklung einer hybriden Augmented und Virtual Reality-Anwendung auf mobilen Endgeräten am Beispiel eines EXIT-Puzzles N2 - Gegenstand der vorliegenden Masterarbeit ist die Realisierung eines EXIT-Puzzles mit integrierten AR- und VR-Elementen. Im Kontext der Wissensvermittlung im Fachgebiet Mathematik angewandt, wirken sowohl die Verwendung des Gesellschaftsspiels als auch der Gebrauch moderner Techniken motivierend auf die Schülerinnen und Schüler. Auf die theoretischen Erkenntnisse, welche mit Hilfe einer umfangreichen Literaturrecherche gesammelt wurden, baut die Analyse verwandter Arbeiten auf. Anhand von 11 semi-strukturierten Benutzerinterviews, konnten Information über die Zielgruppe, den Nutzungskontext und eventuelle Problempunkte des geplanten Puzzles zusammengetragen werden. Auf Grundlage dieses Wissens wurde ein Katalog der wichtigsten Anforderungen und Schwerpunkte aufgestellt. In der Konzeptionsphase wurde dieser Anforderungskatalog als Basis für die Planung des EXIT-Puzzles verwendet, welche anschließend prototypisch umgesetzt wurde. Dieser Prototyp wurde abschließend einer Evaluation anhand von zehn Benutzertests unterzogen, welche einerseits die Gebrauchstauglichkeit des Puzzles erfassen und andererseits Anregungen zur weiteren Verbesserung festhalten sollten. Diese abschließende Evaluation konnte sowohl die Gebrauchstauglichkeit des Puzzles bestätigen als auch Hinweise darauf liefern, dass die Applikation beim Anwenden und Verstehen des Unterrichtsstoffes unterstützend wirkt und unter gewissen Bedingungen für den Einsatz im Mathematikunterricht geeignet wäre. N2 - The subject of this master thesis is the realization of an exit puzzle with integrated elements of AR and VR. Applied in the context of knowledge transfer in the subject area of mathematics, both the use of a board game and modern techniques have a motivating effect on the student body. The analysis of related work is based on theoretical insights, which were collected by literature research. On the foundation of eleven semi-structured interviews, information about the target group, the context of use, and possible problems of the scheduled puzzle could be gathered. Based on this knowledge, a catalog of the main requirements and priorities was made. In the conception phase, this accumulation used to be the groundwork for the development of the exit puzzle, which was implemented prototypically afterward. Finally, this prototype has undergone an evaluation with ten user trials, which on the one side should capture the usability of the puzzle and on the other side should record suggestions for further improvements. This concluding evaluation could confirm the usability of the puzzle as well as provide indications that the application has a supporting effect on the usage and understanding of the subject matters. Furthermore, the evaluation has shown that the application under certain conditions is suitable for use in mathematics class. KW - EXIT-Puzzle KW - Virtual Reality KW - Lernspiel KW - Rätsel KW - Anwendungssoftware KW - Puzzle KW - Augmented Realiy Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus4-27716 ER - TY - CHAP A1 - Grunwald, Guido A1 - Schwill, Jürgen A1 - Sassenberg, Anne-Marie ED - Ratten, Vanessa T1 - Managing Value Co-creation in Partnerships for Sustainability: Towards a Process model for Stakeholder Integration T2 - Artisan entrepreneurship Y1 - 2022 SN - 978-1-80262-079-5 SN - 978-1-80262-078-8 SP - 99 EP - 126 PB - Emerald Publishing CY - Bingley, UK ER - TY - CHAP A1 - Levina, Olga T1 - Transparency as a Potential Factor for Implementation of Machine Learning-based Systems T2 - AMCIS 2022 Proceedings KW - Machine learning based systems KW - transparency KW - technology acceptance model KW - empirical study KW - ethical implications Y1 - 2022 UR - https://aisel.aisnet.org/amcis2022/sig_dsa/sig_dsa/3 PB - AIS Electronic Library (AISeL) ER - TY - CHAP A1 - Meister, Vera G. ED - Michael, Judith T1 - Modellierung von Geschäftsprozessen mit BPMN im Studiengang Bachelor Wirtschaftsinformatik BT - Ein Inverted-Classroom-Konzept mit offenen, digitalen Medien T2 - Modellierung 2022 Satellite Events KW - Geschäftsprozessmodellierung KW - BPMN 2.0 KW - Camunda Modeler KW - Fehlermuster KW - gute Modellierungspraxis KW - BPMN-Informationsparadigma Y1 - 2022 UR - http://dl.gi.de/handle/20.500.12116/38788 U6 - https://doi.org/10.18420/modellierung2022ws-025 N1 - Conferenztitel: MoHoL - Modellierung in der Hochschullehre, Hamburg, 27.06.-1.07.2022 SP - 183 EP - 189 PB - Gesellschaft für Informatik e.V. CY - Bonn ER - TY - THES A1 - Seeland, Jan Philipp T1 - Entwicklung einer Logging-Software zur Überwachung und Analyse der Achsdrehmomente von Industrierobotern N2 - In dieser Arbeit werden Achsdrehmomente und Motorlast eines Industrieroboters der Firma FANUC analysiert, um diese über eine Logging-Software zu optimieren. Das Ziel ist es, über die Aufzeichnung der Motordaten, mechanische Belastungen an den Motoren der Robotergelenke zu reduzieren. Durch diesen Ansatz können Bewegungen des Roboters optimiert und Traglasten maximiert werden. Die zur Zeit angebotene Robotersteuerung des Herstellers bietet nur wenig zeitlich aufgelöste Diagnoseoptionen. Die vorgestellte Lösung unterscheidet sich von anderen Lösungen darin, dass keine Verkabelung von zusätzlicher Hardware notwendig ist. Auch muss keine zusätzliche, kostenpflichtige Software installiert werden. Der in dieser Arbeit verfolgte Ansatz implementiert eine webbasierte Logging-Software für einen Client-PC und ein KAREL Programm für einen FANUC Roboter, welches als Schnittstelle dient. Die Parameter Drehmoment(Disturbance Torque, Torque Monitor) und Motorstrom (OVC Monitor) konnten periodisch alle 50ms von der Robotersteuerung aufgezeichnet und anschließend zeitlich aufgelöst dargestellt werden. Es wurden Experimente mit verschiedenen Geschwindigkeiten, Achsstellungen und Traglasten durchgeführt. Ein signifikantes Ergebnis konnte bei der Reduzierung der Motorlast unter Verwendung von Beschleunigungsrampen festgestellt werden. Auch wurde der negative Einfluss einer inkorrekt eingestellten Traglast bei der Ansteuerung der Motoren nachvollzogen und aufgezeichnet. In einem Kundenprojekt konnte die Software erfolgreich zur Machbarkeitsanalyse eingesetzt werden. KW - FANUC KW - Industrieroboter KW - Motordrehmoment KW - Logging KW - Analyse KW - KAREL KW - Software Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus4-28294 ER - TY - THES A1 - Henker, Maik T1 - Anwendung der IT-Grundschutz-Methodik auf die IT-gestützte Personal- und Gebäudeverwaltung einer Landesbehörde N2 - Eine Landesbehörde in Sachsen ist zum Schutz vor Cyberangriffen gesetzlich verpflichtet ein Informationssicherheitsmanagementsystem zu errichten. Die dafür nötigen Voraussetzungen wie die Einbindung der Leitungsebene und die Erstellung eines Sicherheitskonzeptes liegen bisher nicht vor. Für den Einstieg in die Informationssicherheit veranschaulicht diese Bachelorarbeit die Anwendung der IT-Grundschutz-Methodik des BSI. Zur Komplexitätsreduzierung wurde methodisch die Kernabsicherung nach BSI 200-2 zunächst für die Personalverwaltung und die Gebäudeverwaltung durchgeführt. Im Anschluss wurden Teile der unterstützenden IT-Systeme analysiert. Als Ergebnis der Strukturanalyse, Schutzbedarfsfeststellung, Risikoanalyse und des interviewgestützten Soll-Ist-Vergleiches entstand ein Sicherheitskonzept. Aus dessen Umsetzungstand wurde ein Umsetzungsplan entwickelt. N2 - A state authority in saxony is obligated by law to establish a Management Systems for Information Security to protect them against cyber-attacks. The necessary pre-conditions like accepting the responsibility by the top management and drawing up a security concept are not present yet. To initiate information security these bachelor thesis shows the usage of IT-Grundschutz Methodology. Cause for reducing complexity the core protection from BSI 200-2 was proceeded for personnel administration and for building management for the moment. Afterward parts of the supporting IT systems have been analysed. In result of structure analysis, protection needs, risk analysis and interview-based gap analysis a security concept was developed. On its state an implementation order has been developed. KW - IT-Grundschutz KW - BSI-Standard 200 KW - Informationssicherheit KW - Informationssicherheitskonzept KW - Öffentliche Verwaltung KW - IT-Grundschutz KW - BSI Standards 200 KW - information security KW - security concept KW - public administration Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus4-28381 ER - TY - THES A1 - Selent, Paulina T1 - Deepfakes im Marketing: Eine Analyse von Deepfake-Marketing mit exemplarischer Ausarbeitung eines eigenen Deepfake-Modells zur Überprüfung von Effekten bei Rezipienten N2 - In dieser Masterarbeit wird der Einsatz von Deepfakes im Marketing untersucht. Es geht darum, Deepfake-Marketing zu analysieren und vier eigene Deepfakes zu erstellen, um mögliche Effekte bei Rezipienten zu erkennen. Dazu wird die folgende Forschungsfrage „Welche Effekte lösen hyperpersonalisierte Werbebotschaften durch Deepfakes bei Probanden aus?“ aufgestellt. Für die Beantwortung der Forschungsfrage wird zunächst die Personalisierung von Werbung, sowie Deepfakes im Allgemeinen thematisiert. Im Anschluss daran wurden die Vor- und Nachteile der Hyperpersonalisierung durch die Integration von Deepfakes in die Werbung analysiert und vier eigene Deepfakes auf Basis realer Video-Werbungen generiert. Zur Überprüfung der möglichen Effekte bei Rezipienten wurde eine Online-Umfrage erarbeitet, bei der 22 Probanden die vier selbst produzierten Deepfakes sahen und Fragen zu ihrer persönlichen Einstellung zur Personalisierung durch Deepfakes mitteilten. Die Ergebnisse der nicht repräsentativen Umfrage zeigen, dass sich die Auswirkungen bei hyperpersonalisierten Werbebotschaften durch Deepfakes primär in zwei Kategorien einordnen lassen: positive Überraschung und Misstrauen. Im Detail können die Probanden Deepfakes nicht eindeutig erkennen und wünschen sich eine offene Deklarierung von Deepfake- Inhalten in der Werbung. Bereits 4 von 10 Teilnehmern würden sogar ihre Daten für die Produktion von Deepfake-Werbung zur Verfügung stellen. Doch auch die Angst vor dem Missbrauch persönlicher Daten und möglichen Gefahren, welche von Deepfakes ausgehen könnten, belasten die Teilnehmer. Für zukünftige Forschung bietet sich an, zur Produktvermarktung mit Deepfake-Werbung weiterzuforschen. Dafür bedarf es in erster Linie eine umfangreichere Datenerhebung. KW - Deepfake KW - Marketing KW - Hyperpersonalisierung KW - künstliche Intelligenz Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus4-28395 ER - TY - CHAP A1 - Weingrill, Jörg A1 - Granzer, Thomas A1 - Weber, Michael A1 - Bittner, Wilbert A1 - Seehaus, Carlo A1 - Mettke, Jan T1 - New electronic brains for Halfmann telescopes T2 - Software and Cyberinfrastructure for Astronomy VII T3 - Proceedings of SPIE - 12189 KW - Telescopes KW - Calibration KW - Computer programming KW - Servomechanisms KW - Switches KW - Control systems Y1 - 2022 U6 - https://doi.org/10.1117/12.2629327 N1 - Event: SPIE Astronomical Telescopes + Instrumentation, 17-23 July 2022, Montréal, Québec, Canada SP - 176 EP - 186 PB - SPIE CY - Bellingham, Washington, USA ER - TY - CHAP A1 - Vogel, Mathias A1 - Goschin, Tobias A1 - Flassig, Robert T1 - Techno-economic analysis of excess wind energy utilitzation in the enegy supply of residential quarters T2 - IFAC PapersOnLine KW - excess wind energy KW - power-to-heat KW - sector coupling KW - energy-system modeling KW - dual-tariff Y1 - 2022 U6 - https://doi.org/10.1016/j.ifacol.2022.07.067 N1 - 11th IFAC Symposium on Control of Power and Energy Systems CPES 2022 Held online, 21–23 June 2022 VL - 55 IS - 9 SP - 384 EP - 388 ER - TY - CHAP A1 - Goschin, Tobias A1 - Vogel, Mathias A1 - Flassig, Robert T1 - Energy technologies for decarbonizing the steel processing industry - a numerical study T2 - IFAC-PapersOnLine KW - decarbonization KW - sector coupling KW - secondary steel industry KW - heat integration KW - techno-economic optimization Y1 - 2022 U6 - https://doi.org/10.1016/j.ifacol.2022.07.001 N1 - 11th IFAC Symposium on Control of Power and Energy Systems CPES 2022 Held online, 21–23 June 2022 VL - 55 IS - 9 SP - 1 EP - 5 ER - TY - CHAP A1 - Neubert, Tom A1 - Caballero Morcillo, Antonio José A1 - Vielhauer, Claus T1 - Improving Performance of Machine Learning based Detection of Network Steganography in Industrial Control Systems T2 - ARES 2022: The 17th International Conference on Availability, Reliability and Security Vienna Austria August 23 - 26, 2022 KW - machine learning KW - forensic detection KW - steganography KW - information/data hiding KW - advanced persistent threats Y1 - 2022 U6 - https://doi.org/10.1145/3538969.3544427 SP - 1 EP - 8 PB - Association for Computing Machinery CY - New York, NY ER - TY - CHAP A1 - Heidenreich, Michael A1 - Franczyk, Bogdan A1 - Johannsen, Andreas T1 - Evaluation study of an IT security measurement method for micro-enterprises T2 - Proc. of the International Conference on Electrical, Computer and Energy Technologies (ICECET 2022) 20-22 July 2022, Prague-Czech Republic KW - SME KW - IT security KW - Information security KW - Study Y1 - 2022 U6 - https://doi.org/10.1109/ICECET55527.2022.9873487 PB - IEEE ER - TY - CHAP A1 - Braubach, Lars A1 - Jander, Kai A1 - Pokahr, Alexander ED - Camacho, D. T1 - Macro Architecture for Microservices: Improving Internal Quality of Microservice Systems T2 - Intelligent Distributed Computing XIV. IDC 2021 Y1 - 2022 SN - 978-3-030-96626-3 (Print) U6 - https://doi.org/10.1007/978-3-030-96627-0_10 ER - TY - CHAP A1 - Kevin, Lamshöft A1 - Hildebrandt, Mario A1 - Altschaffel, Robert A1 - Keil, Oliver A1 - Hempel, Ivo A1 - Dittmann, Jana A1 - Neubert, Tom A1 - Vielhauer, Claus T1 - Resilience against and detection of information hiding in nuclear instrumentation and control systems within the scope of NSS 17-T T2 - Kerntechnik 2022, Leipzig, 21. - 22. Juni 2022 Y1 - 2022 UR - https://www.kerntechnik.com PB - INFORUM Verlags- und Verwaltungsgesellschaft mbH CY - Berlin ER - TY - CHAP A1 - Schnitzer, Julia A1 - Kodalle, Micha T1 - Brain computer interface (BCI)–UX-design for visual and non-visual interaction by mental commands in the context of technical possibilities T2 - Proc. IS&T Int’l. Symp. on Electronic Imaging: Mobile Devices and Multimedia: Enabling Technologies, Algorithms, and Applications Y1 - 2022 U6 - https://doi.org/10.2352/EI.2022.34.3.MOBMU-402 SP - 402-1 EP - 402-88 PB - Society for Imaging Sciences and Technology CY - Springfield, VA ER - TY - CHAP A1 - Kant, Daniel A1 - Johannsen, Andreas T1 - Evaluation of AI-based use cases for enhancing the cyber secu- rity defense of small and medium-sized companies (SMEs) T2 - Proc. IS & T International Symposium on Electronic Imaging: Mobile Devices and Multimedia: Enabling Technologies, Algorithms, and Applications KW - Cyber defense KW - cyber security KW - artificial intelligence KW - defensive AI KW - cyber security applications KW - cyber security use cases KW - security use cases KW - AI-based security applications KW - SME Y1 - 2022 U6 - https://doi.org/10.2352/EI.2022.34.3.MOBMU-387 SP - 387-1 EP - 387-8 CY - Springfield, VA ER - TY - CHAP A1 - Revina, Aleksandra A1 - Aksu, Ünal T1 - Towards a Business Process Complexity Analysis Framework Based on Textual Data and Event Logs T2 - 17th International Conference on Wirtschaftsinformatik, February 2022, Nürnberg, Germany KW - Business process analysis KW - complexity KW - event log KW - textual data Y1 - 2022 UR - https://aisel.aisnet.org/wi2022/bpm/bpm/4 ER - TY - THES A1 - Ney, Audrey T1 - E-Learning an der Technischen Hochschule Brandenburg – Bereitstellung eines hochschulweiten Weiterbildungsangebotes zu Themen der Informationskompetenz N2 - Die vorliegende Arbeit beschäftigt sich mit der Frage, wie ein E-Learning-Angebot an der Technischen Hochschule Brandenburg das Interesse am Thema der Informationskompetenz steigern sowie diese Kompetenzen entsprechend vermitteln kann. Der Fokus liegt dabei auf zwei quantitativen Umfragen, der Erstellung eines Kurses in Moodle sowie eine Handlungsempfehlung, um die Digitale Lehre an der THB und der Hochschulbibliothek weiter zu etablieren. KW - Digitale Lehre KW - E-Learning KW - Informationskompetenz KW - Hochschulbibliothek KW - Moodle Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus4-28711 ER - TY - THES A1 - Ghulam Zada, Taj Mohammad T1 - Machine-Learning-basiertes Forecasting des Elektromobilitätshochlaufs in Deutschland N2 - Forecasting is an important decision-making tool for businesses, organizations, and governments because it saves a lot of resources. The forecast of the market share of new BEV car registrations in Germany can help efficiently evaluate strategic and future-oriented decisions, e.g., the climate targets set by the federal government. Machine learning methods were used to implement forecasting. Two machine learning models were used to forecast of the market share of new BEV car registrations in Germany: SARIMA(X) and DeepAR model. Due to variety in input datasets, four univariate and multivariate time series analysis models were trained. Afterwards, all four trained models were compared with each other using the RMSE metric. The last six months of the dataset were used to evaluate the model quality. The result of model comparison shows that SARIMAX model needs the exogenous variables to create a forecast of the multivariate data sets. However, the DeepAR model does not require any exogenous variables to generate forecast. Furthermore, if the input dataset contains at least 300 observations, then the implementation of DeepAR model is much more advantageous than SARIMA(X) model. DeepAR model not only supports the univariate and multivariate datasets, but also creates a global model that generates a forecast per variable. This is a great advantage over the SARIMA(X) model, which is not capable of this. N2 - Forecasting ist eine wichtige Methode zur Entscheidungsfindung für Unternehmen, Organisationen und Regierungen, da so der Ressourcenverbrauch reduziert werden kann. Der Forecast des prozentualen Marktanteils der neuen BEV-PKW-Zulassungen in Deutschland kann helfen, um strategische und zukunftsorientierte Entscheidungen, z.B. die vom Bund gesetzten Klimaziele, besser steuern zu können. Zur Durchführung des Forecastings wurde der Einsatz unterschiedlicher Machine-Learning-Methoden ausgenutzt. Es wurden zwei Machine-Learning-Modelle für das Forecasting des prozentualen Marktanteils der BEV-PKW-Neuzulassungen in Deutschland verwendet: Die SARIMA(X)- und DeepAR-Modelle. Aufgrund der Unterschiede in den Eingabedatensätzen wurden vier Modelle der Univariate- und Multivariate- Zeitreihenanalyse trainiert. Mit Hilfe der RMSE-Fehlermetrik wurden die vier trainierten Modelle miteinander verglichen. Die letzten sechs Monate der Eingabedatensätze wurden zur Evaluierung der Modellqualität genutzt. Die Ergebnisse dieser Masterarbeit zeigen, dass das SARIMAX-Modell zur Erstellung einer Prognose der multivariaten Datensätze die exogenen Variablen benötigt. Allerdings braucht das DeepAR-Modell keine exogenen Variablen, um eine Prognose generieren zu können. Wenn der Eingabedatensatz mindestens 300 Zeitreihen beträgt, eignet sich das DeepAR-Modell besser als das SARIMA(X)-Modell. Das DeepAR-Modell unterstützt nicht nur die univariaten- und multivariaten Datensätze, sondern generiert auch ein globales Modell, wodurch eine Prognose je Variable erstellt wird. Das ist ein großer Vorteil gegenüber dem SARIMA(X)-Modell, welches dazu nicht in der Lage ist. KW - Forecasting KW - Time Series Analysis KW - SARIMA(X) KW - DeepAR KW - Hyperparameter Optimization KW - Battery Electric Vehicles (BEV), Elektromobilität Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus4-28784 ER - TY - THES A1 - Rothenhäusler, Luis T1 - d3.js and its potential in data visualization N2 - Diese Arbeit gibt einen Einblick sowie eine Einschätzung eines Code-basierten Werkzeuges zur Datenvisualierung, der d3js bibliothek für JavaScript. Es werden nicht nur das Potential, sondern auch die Vor- und Nachteile evaluiert. Weiterhin wird eine Einschätzung gegeben, wann der Einsatz dieses Werkzeuges sinnvoll ist. Um diese Einschätzungen treffen zu können, werden einige Di- agramme, bezüglich der aktuellen Flüchtlichgssituation, die aufgrund des bewaffneten Ukrainekonfilktes besteht, erstellt. Dafür werden zunächst die nötigen Grundlagen erklärt. Dies umfasst sowohl Daten und Datentypen, als auch Diagramme und deren Aufbau. Abschließend werden die erstellten Diagramme, sowie d3js im Diskussionsteil ausgewertet. Da d3js in reinem JavaScript implementiert ist, lässt es sich problem- los mit anderen Frameworks kombinieren. Der Fokus von d3js liegt auf der schnellen und einfachen Manipulation von Elementen im Document Object Model. d3js ist jedoch kein Werkzeug, mit dem in wenigen Zeilen Quell- code ganze Diagramme erstellt werden können. Vielmehr müssen sowohl die einzelnen Elemente eines Diagrammes, wie auch deren Position und Ausse- hen händisch definiert werden. Das ermöglicht ein Höchstmaß an Kontrolle über das Aussehen und Verhalten der Diagramme. Es ist jedoch auch zeitin- tensiv und führt eventuell zur Implementation unübersichtlicher Diagramme. Gepaart mit der hohen initialen Lernkurve kann die Nutzung von d3js nur in speziellen Fällen, welche die volle Kontrolle über Aussehen und Verhalten von Diagrammen benötigen, empfohlen werden. Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus4-28536 ER - TY - THES A1 - Diel, Alexander T1 - Vergleich moderner Frontend-Technologien zur Erstellung von Single-Page-Webanwendungen N2 - In der heutigen Zeit finden Single-Page-Webanwendung immer mehr Verwendung. Entsprechend dieser Entwicklung wurden Technologien, zur Erstellung von Single-Page-Webanwendungen, angefertigt. Um ihre Unterschiede und individuellen Anwendungsmöglichkeiten zu ermitteln, wurde mit den drei populärsten Technologien eine Webanwendung gebaut und eine Evaluation anhand einer Reihe von Kriterien durchgeführt. Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus4-28656 ER - TY - THES A1 - Surjanto, Jennifer T1 - Analysis of the Preferences of Younger and Older Indonesian Users Towards the User Interface of Mobile Instant Messaging Applications N2 - In recent years, the messaging application has been Indonesia’s most widely used mobile app. The number of users of these instant messaging (IM) applications has also been increasing constantly. Unfortunately, research has mentioned that older users often face challenges in using them. Although some papers have created guidelines for designing interfaces for the elderly, these applications are still focused on developing according to the need of young people. In addition, the aging of adults increases their chances of facing some difficulties. Therefore, this thesis aims to give a better understanding of the interface of the mobile instant messaging (MIM) application preferred by its users, specifically Indonesian users. By distributing an online-based survey to 150 Indonesian users of the MIM application, the preferences of several features in the message list and messaging interface of this application are collected. Then, the statistical analysis of the results found that the preferences of both users’ age groups differ. Among them are the button or icon each age group finds more suitable, the bottom bar in the messaging interface, and the placement of action options to be performed to the message they prefer most. Thus, this research also presents design recommendations that both younger and older users prefer. KW - Preference KW - Mobile Instant Messaging KW - User Interface KW - Indonesian user KW - Younger user KW - Older user Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus4-28675 ER - TY - JOUR A1 - Schnitzer, Julia A1 - Kodalle, Micha T1 - Brain computer interface (BCI) - UX-design for visual and non-visual interaction by mental commands in the context of technical possibilities JF - Electronic imaging JF - IS&T International Symposium on Electronic Imaging : Mobile Devices and Multimedia: Enabling Technologies, Algorithms, and Applications, 2022 N2 - How do we interact with the digital world in the future by only using our thoughts to interact? To interact with the digital world, we use gestures (most common: swipe gestures), voice, facial expressions and mental commands. The latter has become more important by recent press releases about scientific achievements, for example, from Neuralink [1] using invasive technology to control a computer game by thoughts only [2]. Another study says an application can display text on a screen by just thinking about a word [3]. Currently, BCIs are mainly developed for neurotechnology and healthcare. However, it is a question of time when these services will be available for commercial products for everyday life. (Until then, manufacturers have to minimize health risks and face privacy and safety regulations.) The thesis is that in the future, you will be able to interact with your digital devices just by using your thoughts and you’ll do much faster. This makes sense in many situations where you f. e. do not have a free hand (manufacturing, sports) or cannot speak (underwater). But for such services, you cannot rely on conventional visual design guidelines or interaction patterns, frameworks or libraries. Navigation interacting with a digital service by mental command has a lot of advantages, the human brain comes naturally with some specific features that force us to find a radically new way to interact with digital interfaces. The following study introduces you first into working conditions with mental commands, comparing invasive and non-invasive technologies, and later on comparing several possibilities of interaction patterns for a BCI of everyday usage. [1] Neuralink is a US neurotechnology company founded in July 2016 by Elon Musk and eight other persons. Neuralink’s goal is to develop a device for communication between human brain and computers, a so-called brain-computer-interface(BCI). [2] The Guardian, Fr. 9th April 2021 “Elon Musk startup shows monkey with brain chip implants playing video game”. https://www.theguardian.com/technology/2021/apr/09/elon-musk- neuralink-monkey-video-game . [3] Scientific American, 15th July 2021, Neuroscience, author Emily Willingham: “New Brain Implant Transmits Full Words from Neural Signals”. Y1 - 2022 UR - https://library.imaging.org/ei/articles/34/3/MOBMU-402 SN - 2470-1173 VL - 34 IS - 3 SP - 402-1 EP - 402-8 PB - Society for Imaging Science and Technology ER - TY - JOUR A1 - Kant, Daniel A1 - Johannsen, Andreas T1 - Evaluation of AI-based use cases for enhancing the cyber security defense of small and medium-sized companies (SMEs) JF - Electronic Imaging JF - IS&T International Symposium on Electronic Imaging : Mobile Devices and Multimedia: Enabling Technologies, Algorithms, and Applications, 2022 N2 - Companies are increasingly facing the challenges of a persistent cyber threat landscape. By means of AI, cyber attacks can be efficiently conducted more successful through offensive AI. As for cyber defense, AI can be also utilized against cyber threats (defensive AI). Due to limited resources, especially in small and medium-sized companies (SMEs), there is a need to deploy more effective defensive cyber security solutions. Precisely, the adaptation of AI-based resilient defenses must be driven forward. Therefore, the aim of this paper is to identify and evaluate AI-related use cases with a high impact potential on the cyber security level, while being applicable to SMEs at the same time. In order to reach the research goal, an extensive literature review of several online catalogs, surveys and online platforms was conducted. In conclusion, seven crucial AI-based security features were outlined that are providing a high impact potential to the security level for SMEs. Afterwards, the results are discussed and set into a broader context. Even though AI-based security solutions are providing a large range of advantages, certain challenges and barriers using AI-related security applications are addressed in the paper as well. A high need for usable state of the art AI based cyber security solution for SMEs was identified. Y1 - 2022 UR - https://library.imaging.org/ei/articles/34/3/MOBMU-387 SN - 2470-1173 VL - 34 IS - 3 SP - 387-1 EP - 387-8 PB - Society for Imaging Science and Technology ER - TY - JOUR A1 - Kombe, Emmanuel Yeri A1 - Lang'at, Nickson A1 - Njogu, Paul A1 - Malessa, Reiner A1 - Weber, Christian-Toralf A1 - Njoka, Francis A1 - Krause, Ulrich T1 - Process modeling and evaluation of optimal operating conditions for production of hydrogen-rich syngas from air gasification of rice husks using aspen plus and response surface methodology JF - Bioresource Technology N2 - Biomass gasification is recognized as a viable avenue to accelerate the sustainable production of hydrogen. In this work, a numerical simulation model of air gasification of rice husks is developed using the Aspen Plus to investigate the feasibility of producing hydrogen-rich syngas. The model is experimentally validated with rice husk gasification results and other published studies. The influence of temperature and equivalence ratio on the syngas composition, H2 yield, LHVSyngas, H2/CO ratio, CGE, and PCG was studied. Furthermore, the synchronized effects of temperature and ER are studied using RSM to determine the operational point of maximizing H2 yield and PCG. The RSM analysis results show optimum performance at temperatures between 820 °C and 1090 °C and ER in the range of 0.06–0.10. The findings show that optimal operating conditions of the gasification system can be achieved at a more refined precision through simulations coupled with advanced optimization techniques. Y1 - 2022 UR - https://linkinghub.elsevier.com/retrieve/pii/S096085242201063X SN - 0960-8524 VL - 361 SP - 1 EP - 11 PB - Elsevier ER - TY - JOUR A1 - Ruzankina, Iuliia A1 - Mukhin, Nikolay A1 - Mermoul, Ali A1 - Parfenov, Vadim A1 - Fron, Eduard A1 - Ferrini, Gabriele T1 - Surface optical sensitivity enhanced by a single dielectric microsphere JF - Optics Express N2 - Single dielectric microspheres can manipulate light focusing and collection to enhance optical interaction with surfaces. To demonstrate this principle, we experimentally investigate the enhancement of the Raman signal collected by a single dielectric microsphere, with a radius much larger than the exciting laser spot size, residing on the sample surface. The absolute microsphere-assisted Raman signal from a single graphene layer measured in air is more than a factor of two higher than that obtained with a high numerical aperture objective. Results from Mie’s theory are used to benchmark numerical simulations and an analytical model to describe the isolated microsphere focusing properties. The analytical model and the numerical simulations justify the Raman signal enhancement measured in the microsphere-assisted Raman spectroscopy experiments. Y1 - 2022 UR - https://doi.org/10.1364/OE.472720 VL - 30 IS - 24 SP - 43021 EP - 43036 PB - Optica ER - TY - CHAP A1 - Wrobel, Martin A1 - Hölzner, Heike M. A1 - Nicolai, Alexander T. T1 - The power of images: Metaphors that drive start-up collaborations T2 - G-Forum Tagungsband 2022 Y1 - 2022 UR - https://www.fgf-ev.de/g-forum-2022-in-dresden/ SP - 1 EP - 19 PB - G-Forum 2022 ER - TY - CHAP A1 - Seyerlein-Klug, Annegrit A1 - Deussen, Peter ED - Wahlster, Wolfgang ED - Winterhalter, Christoph T1 - 4.1.: Grundlagen T2 - Deutsche Normungsroadmap Künstliche Intelligenz Y1 - 2022 SP - 57 EP - 102 PB - DKE - Deutsche Kommission Elektrotechnik Elektronik Informationstechnik in DIN und VDE CY - Berlin/Offenbach am Main ET - 2 ER - TY - CHAP A1 - Ezennaya-Gomez, Salatiel A1 - Vielhauer, Claus A1 - Dittmann, Jana ED - Katsikas, Sokratis ED - Lambrinoudakis, Costas ED - Cuppens, Nora ED - Mylopoulos, John ED - Kalloniatis, Christos ED - Meng, Weizhi ED - Furnell, Steven ED - Pallas, Frank ED - Pohle, Jörg ED - Sasse, M. Angela ED - Abie, Habtamu ED - Ranise, Silvio ED - Verderame, Luca ED - Vidal, Jorge Maestre ED - Cambiaso, Enrico ED - Monge, Marco Antonio Sotelo T1 - A Semantic Model for Embracing Privacy as Contextual Integrity in the Internet of Things T2 - European Symposium on Research in Computer Security, Cham, 2022 Konferenzband: Computer Security. ESORICS 2021 International Workshops N2 - Due to the increasing number of complaints alleging privacy violations against companies to data protection authorities, the translation of business goals to system design goals and the subsequent consequences for customers’ privacy poses a challenge for many companies. For this reason, there is a need to bridge the economics of privacy and threats to privacy. To this end, our work relies on the concept of privacy as contextual integrity. This framework defines privacy as appropriate information flows subjected to social norms within particular social contexts or spheres. In this paper, we introduce a preliminary version of a semantic model which aims to relate and provide understanding on how well-established business goals may affect their customers’ privacy by designing IoT devices with permission access, data acquired by sensors, among other factors. Finally, we provide a use case application showing how to use the semantic model. The model aims to be an educational tool for professionals in business informatics during the modeling and designing process of a product which may gather sensitive data or may infer sensitive information, giving an understanding of the interaction of the product and its footprint with diverse actors (humans or machines). In the future, a further complete model of the presented may also target other groups, such as law enforcement bodies, as part of their educational training in such systems. T3 - Lecture notes in computer science - 13106 Y1 - 2022 UR - https://link.springer.com/10.1007/978-3-030-95484-0_24 SN - 978-3-030-95483-3 978-3-030-95484-0 U6 - https://doi.org/10.1007/978-3-030-95484-0_24 IS - 13106 SP - 413 EP - 423 PB - Springer CY - Cham ER - TY - CHAP A1 - Creutzburg, Reiner A1 - Hagen, Dirk A1 - Hasche, Eberhard ED - Agaian, Sos ED - Jassim, Sabah ED - DelMarco, Stephen ED - Asari, Vijayan K. T1 - Potentials and challenges for mega events: mobile devices usability for virtual reality, augmented reality, and visual effects T2 - Konferenz: Multimodal Image Exploitation and Learning 2022, Orlando, United States, 2022/ Koferenzband: Multimodal Image Exploitation and Learning 2022 Y1 - 2022 UR - https://www.spiedigitallibrary.org/conference-proceedings-of-spie/PC12100/2618822/Potentials-and-challenges-for-mega-events--mobile-devices-usability/10.1117/12.2618822.full SN - 978-1-5106-5617-8 U6 - https://doi.org/10.1117/12.2618822 PB - SPIE - The International Society for Optics and Photonics CY - Orlando, United States ER - TY - CHAP A1 - Vogel, Mathias A1 - Goschin, Tobias A1 - Flassig, Robert T1 - Techno-economic analysis of excess wind energy utilization in the energy supply of residential quarters T2 - Konferenz: Symposium on Control of Power and Energy Systems (CPES), 2022/ Konferenzband:11th IFAC Symposium on Control of Power and Energy Systems (CPES 2022) Y1 - 2022 UR - https://www.sciencedirect.com/science/article/pii/S2405896322004529 SN - 978-1-71385-937-6 U6 - https://doi.org/10.32479/ijeep.8067 PB - Elsevier ER -