TY - JOUR A1 - Hoheisel, W. A1 - Vollmer, Michael A1 - Träger, F. T1 - Desorption of metal atoms with laser light: Mechanistic studies JF - In: Physical Review / B 48 1993) 23, 17463-17476 N2 - Results on laser-induced desorption of metal atoms from small metal particles are presented. Experiments have been performed on sodium, potassium, and silver particles supported on a LiF(100) single-crystal surface under ultrahigh vacuum conditions. Measurements include the determination of the desorption rate as a function of laser wavelength, laser intensity, average particle size, and substrate temperature, the determination of the kinetic energy of the desorbed atoms, the investigation of the optical spectra of the supported metal particles, and the study of the influence of adsorbate molecules on the desorption rate. Furthermore, theoretical extinction and absorption spectra of the metal particles have been calculated with the classical electrodynamical Mie theory as a function of average particle size and excitation wavelength. Also, the radial electric field at the particle surface was computed. The results of the experiments and theoretical calculations are combined to give a consistent picture of the mechanism of metal-atom desorption by electronic excitation with laser light. A realistic surface potential from which the atoms escape and nonlocal optical effects are taken into account. The latter introduce additional absorption channels by the formation of electron-hole pairs in the surface layer of the particle which relax into antibonding states before desorption occurs. Finally, the mechanism is discussed in the light of similar phenomena observed for thin metal films. Possibilities for future work are outlined. © 1993 The American Physical Society Y1 - 1993 U6 - https://doi.org/10.1103/PhysRevB.48.17463 ER - TY - JOUR A1 - Götz, T. A1 - Hoheisel, W. A1 - Träger, F. A1 - Vollmer, Michael T1 - Interplay between collective and single electron excitations in large metal clusters JF - In: Zeitschrift für Physik / D 26 (1993), 267-269 Y1 - 1993 ER - TY - CHAP A1 - Vollmer, Michael A1 - Kreibig, U. T1 - Collective excitations of large metal clusters T2 - In: Nuclear physics concepts in the study of atomic cluster physics : proceedings of the 88th W.-E.-Heraeus-Seminar, held at Bad Honnef, FRG, 26 - 29 November 1991 / R. Schmidt ... (ed.). - Berlin [u.a.] : Springer, 1992. - (Lecture notes in physics ; Vol. 404). - ISBN 3-540-55625-7 ; 0-387-55625-7. - S. 266-276 N2 - Studies of the evolution of the optical properties of metal clusters as a function of size have gained considerable attention in the last few years. One theoretical approach starts from large metal clusters, which can be described by classical electrodynamics, provided the dielectric functions of the clusters are known. the resulting resonant features in the absorption spectra are commonly called surface plasmons and are collective excitations of the electron system.The present paper discusses the electrodynamic (Mie) theory for large clusters of different metals, also considering the range of validity of this approach towards smaller cluster sizes. More details can be found in an extended review on this topic which is to be published soon [1]. Y1 - 1992 U6 - https://doi.org/10.1007/3-540-55625-7_30 SP - 266 EP - 276 ER - TY - CHAP A1 - Möllmann, Klaus-Peter A1 - Pinno, Frank A1 - Vollmer, Michael T1 - Microscopic and high-speed thermal imaging: a powerful tool in physics R&D T2 - In: InfraMation proceedings Vol.10 (2009), 303-317 Y1 - 2009 SP - 303 EP - 317 ER - TY - CHAP A1 - Vollmer, Michael A1 - Möllmann, Klaus-Peter A1 - Pinno, Frank T1 - Cheese cubes, light bulbs, soft drinks: An unusual approach to study convection, radiation and size dependent heating and cooling T2 - In: InfraMation proceedings Vol. 9 (2008), p. 477-492 Y1 - 2008 SP - 477 EP - 492 ER - TY - CHAP A1 - Möllmann, Klaus-Peter A1 - Pinno, Frank A1 - Vollmer, Michael T1 - Night sky radiant cooling – influence on outdoor thermal imaging analysis T2 - In: InfraMation proceedings Vol. 9 (2008), 279-295 Y1 - 2008 SP - 279 EP - 295 ER - TY - CHAP A1 - Pinno, Frank A1 - Möllmann, Klaus-Peter A1 - Vollmer, Michael T1 - Thermography of window panes – problems, possibilities and troubleshooting T2 - In: InfraMation proceedings Vol. 9 (2008), 355-362 Y1 - 2008 SP - 355 EP - 362 ER - TY - JOUR A1 - Vollmer, Michael A1 - Gedzelman, Stanley David T1 - Simulating irradiance during lunar eclipses: the spherically Symmetric case JF - In: Applied Optics 47 (2008) 34, H52-61 N2 - Irradiance during total lunar eclipses is simulated using a pinhole model. The Moon is illuminated by direct sunlight that is refracted into the Earth’s shadow as it passes through the atmosphere at the terminator but is depleted by scattering by molecules, extinction by aerosol particles, absorption by ozone, and obstruction by clouds and elevated land. On a spherical, sea-level Earth, and a cloudless, molecular atmosphere with no ozone, the eclipsed Moon appears red and calculated irradiance at the center of the umbra is reduced by a factor of about 2400 from direct moonlight. Selective absorption mainly of light around 600 nm by stratospheric ozone turns the periphery of the umbra pale blue. Typical distributions of aerosol particles, ozone, mountains, and clouds around the terminator reduce irradiance by an additional factor of the order of 100. © 2008 Optical Society of America Y1 - 2008 U6 - https://doi.org/http://dx.doi.org/10.1364/AO.47.000H52 SP - H52 EP - H61 ER - TY - JOUR A1 - Gedzelman, Stanley David A1 - Vollmer, Michael T1 - Simulating irradiance and color during lunar eclipses using satellite data JF - In: Applied Optics 47 (2008) 34, pp. H149-H156 N2 - Irradiance and color during the total lunar eclipses of 2007 and 2008 are simulated using a ray tracing model that includes refraction, scattering by molecules, and observed or climatological distributions of aerosols, ozone, clouds, and topography around the terminator. Central portions of the umbra appear deep red for almost all eclipses due to preferential removal of short wavelengths in the spectrum of sunlight by scattering in the lower troposphere. The fringe of the umbra appears turquoise or blue due to selective removal of wavelengths around 600 nm by the Chappuis absorption bands of ozone in the stratosphere. Asymmetric distributions of clouds and aerosols, particularly for the 2008 eclipse, produce minimum calculated irradiance up to 17  arc min from the umbra center, while high ozone content over the arctic makes the northern edge of the umbra deepest blue. © 2008 Optical Society of America Y1 - 2008 U6 - https://doi.org/http://dx.doi.org/10.1364/AO.47.00H149 SP - H149 EP - H156 ER - TY - JOUR A1 - Hernitschek, Nina A1 - Schmidt, Elmar A1 - Vollmer, Michael T1 - Lunar eclipse photometry: absolute luminance measurements and modeling JF - In: Applied optics 47 (2008) 34, pp. H62-H71 N2 - The Moon’s time-dependent luminance was determined during the 9 February 1990 and 3 March 2007 total lunar eclipses by using calibrated, industry standard photometers. After the results were corrected to unit air mass and to standard distances for both Moon and Sun, an absolute calibration was accomplished by using the Sun’s known luminance and a pre-eclipse lunar albedo of approximately 13.5%. The measured minimum level of brightness in the total phase of both eclipses was relatively high, namely −3.32 mvis and −1.7 mvis , which hints at the absence of pronounced stratospheric aerosol. The light curves were modeled in such a way as to let the Moon move through an artificial Earth shadow composed of a multitude of disk and ring zones, containing a relative luminance data set from an atmospheric radiative transfer calculation. © 2008 Optical Society of America Y1 - 2008 U6 - https://doi.org/10.1364/AO.47.000H62 SP - H62 EP - H71 ER - TY - CHAP A1 - Möllmann, Klaus-Peter A1 - Pinno, Frank A1 - Vollmer, Michael T1 - Influence of wind effects on thermal imaging results – Is the wind chill effect relevant ? T2 - In: InfraMation proceedings Vol. 8 (2007), 21-31 Y1 - 2007 SP - 21 EP - 31 ER - TY - JOUR A1 - Gedzelman, Stanley David A1 - Vollmer, Michael T1 - Atmospheric Optical Phenomena and Radiative Transfer JF - In: Bulletin of the American Meteorological Society. 89 (2008) 4, 471-485 N2 - We present simple radiative transfer models for the radiance and color of atmospheric optical phenomena. Skylight, halos, and rainbows are treated as singly scattered sunlight that is depleted by scattering as it passes through a plane-parallel atmosphere and a vertical rain shaft or a geometrically thin cloud layer. Skylight in a molecular atmosphere grades from deep blue at the zenith to pale blue near the horizon whenever the solar zenith angle sun ≤ 80°. Skylight near the horizon is orange resulting from wavelength-dependent scattering by air molecules and aerosol particles through a long oblique path through the atmosphere when the sun is low in the sky (sun ≥ 85°). Halos (and coronas) seen through clouds facing the sun are brightest for cloud optical depth τcld ≈ cos(sun), and fade to obscurity for τcld ≥ 5. Rainbows (and glories), seen by light that is backscattered from clouds, also appear most dramatic when 0.2 ≤ τcld ≤ 1, but remain visible even in the thickest clouds. Y1 - 2008 U6 - https://doi.org/10.1175/BAMS-89-4-471 SP - 471 EP - 485 ER - TY - JOUR A1 - Vollmer, Michael T1 - Effects of absorbing particles on coronas and glories JF - In: Applied optics 44 (2005) 27, 5658-5666 N2 - Light scattering from small particles changes if the particles are absorbing. Whereas the effect is small for coronas and Bishop's ring, glories show pronounced attenuation with increasing absorption. Results indicate suitable wavelength regions for studies of glory scattering from cloud tops. The behavior of core-shell particles could have applications for studying the atmosphere of Venus; in addition it provides more insight into the simple ray-path model of the glory. © 2005 Optical Society of America Y1 - 2005 U6 - https://doi.org/10.1364/AO.44.005658 SP - 5658 EP - 5666 ER - TY - CHAP A1 - Christmann, S. A1 - Vollmer, Michael T1 - Jahrgangsübergreifendes Projekt zum Wetter für die Grundschule T2 - In: Didaktik der Physik : Beiträge zur Frühjahrstagung Düsseldorf 2004 ; CD zur Frühjahrstagung des Fachverbandes Didaktik der Physik in der Deutschen Physikalischen Gesellschaft / V. Nordmeier ... (Hrsg.). - Berlin : Lehmanns Media, 2004. - 1 CD-ROM. - ISBN 3-86541-066-9 Y1 - 2004 ER - TY - JOUR A1 - Gedzelman, Stanley David A1 - Vollmer, Michael T1 - Crepuscular rays: laboratory experiments and simulations JF - In: Applied Optics Vol. 50 (2011) 28, pp. F142-F151 N2 - Model simulations of laboratory-generated and natural crepuscular rays are presented. Rays are created in the laboratory with parallel light beams that pass through artificial fogs and milk–water solutions. Light scattered by 90° in a dilute mixture of whole milk first increases in intensity with distance from the source to a maximum as a result of multiple scattering by mainly small angles before decreasing exponentially due to extinction as distance continues to increase. Crepuscular rays are simulated for three cloud configurations. In case 1, the Sun at the zenith is blocked by a cloud with an overhanging anvil. The rays appear white against blue sky and are brightest when atmospheric turbidity, β≈11 . Shading by the anvil separates maximum brightness from apparent cloud edge. In case 2, a ray passes through a rectangular gap in a cloud layer. The ray is faint blue in a molecular atmosphere but turns pale yellow as β and solar zenith angle, ϕsun , increase. At ϕsun=60° it appears most striking when the cloud is optically thick, β≈5 , and the beam width Δx≈1000 m . In these cases, increasing aerosol radius, raer , to about 1000 nm brightens, narrows, and shortens rays. In case 3, the twilight Sun is shaded by a towering cloud or mountain. The shaded rays are deeper blue than the sunlit sky because the light originates higher in the atmosphere, where short waves have suffered less depletion from scattering. The long optical path taken by sunlight at twilight makes color and lighting contrasts of the rays greatest when the air is quite clean, i.e., for β−1≪1 . In all cases, the brightest rays occur when sunlight passes through an optical thickness of atmosphere, τ≈O(1) . © 2011 Optical Society of America Y1 - 2011 U6 - https://doi.org/http://dx.doi.org/10.1364/AO.50.00F142 ER - TY - JOUR A1 - Vollmer, Michael A1 - Möllmann, Klaus-Peter T1 - Rainbows, water droplets, and seeing—slow motion analysis of experiments in atmospheric optics JF - In: Applied optics Vol. 50 (2011) 28, pp. F21–F28 N2 - Many physics processes underlying phenomena in atmospheric optics happen on a rather short time scale such that neither the human eye nor video cameras are able to analyze the details. We report applications of high-speed imaging of laboratory experiments in atmospheric optics with subsequent slow motion analysis. The potential to study respective transient effects is investigated in general and for a few phenomena in detail, in particular for rainbow scattering due to single oscillating droplets during free fall, and for light propagation effects through atmospheric paths with turbulences, leading, e.g., to scintillation of stars or shimmering of mirage images. © 2011 Optical Society of America Y1 - 2011 U6 - https://doi.org/http://dx.doi.org/10.1364/AO.50.000F21 SP - F21 EP - F28 ER - TY - CHAP A1 - Vollmer, Michael A1 - Pinno, Frank A1 - Möllmann, Klaus-Peter T1 - Measurements of sun and moon with IR cameras: effects of air mass T2 - In: InfraMation proceedings. - Vol. 11 ( 2010) , 57-74 Y1 - 2010 SP - 74 ER - TY - CHAP A1 - Möllmann, Klaus-Peter A1 - Pinno, Frank A1 - Vollmer, Michael T1 - Two-color or ratio thermal imaging - potentials and limits T2 - In: InfraMation proceedings. - Vol. 11 (2010), pp.41-56 Y1 - 2010 SP - 41 EP - 56 ER - TY - CHAP A1 - Pinno, Frank A1 - Vollmer, Michael A1 - Möllmann, Klaus-Peter T1 - Improved sensitivity for blower door thermography using image subtraction T2 - In: InfraMation proceedings. - Vol. 11 (2010), p. 29-40 Y1 - 2010 SP - 29 EP - 40 ER - TY - CHAP A1 - Vollmer, Michael A1 - Möllmann, Klaus-Peter T1 - New book on IR imaging: the ultimate resource for all users T2 - In: InfraMation proceedings. - Vol. 11 (2010), pp 75-80 Y1 - 2010 SP - 75 EP - 80 ER - TY - CHAP A1 - Vollmer, Michael A1 - Möllmann, Klaus-Peter T1 - IR imaging of gases: potential applications for CO2 cameras T2 - In: InfraMation proceedings. - Vol. 10 (2009), p.113-124 Y1 - 2009 SP - 113 EP - 124 ER - TY - CHAP A1 - Vollmer, Michael A1 - Möllmann, Klaus-Peter T1 - IR imaging of gases: quantitative analysis T2 - In: InfraMation proceedings. - Vol. 10 (2009), p. 99-112 Y1 - 2009 SP - 99 EP - 112 ER - TY - CHAP A1 - Vollmer, Michael A1 - Vujković, M. A1 - Trellu, Y. A1 - Möllmann, Klaus-Peter T1 - IR feedback loops to spotlights: thermography and contemporary dancing T2 - In: InfraMation proceedings.- Vol. 10 (2009), p. 89-97 Y1 - 2009 SP - 89 EP - 97 ER - TY - CHAP A1 - Pinno, Frank A1 - Möllmann, Klaus-Peter A1 - Vollmer, Michael T1 - Solar load and reflection effects and respective time constants in outdoor building inspections T2 - In: Inframation proceedings Vol. 10 (2009), 319-330 Y1 - 2009 SP - 319 EP - 330 ER - TY - JOUR A1 - Oertel, Christian A1 - Fandre, A. T1 - Tire Model RMOD-K 7 and Misuse Load Cases JF - In: SAE technical papers 2009-01-0582 N2 - Among load cases concerning vehicle suspension strength and durability, the misuse case is very special because of large obstacles. In this paper, an extension of the flexible belt model RMOD-K 7 concerning misuse situations is discussed. In normal rolling conditions, contact occurs between tire and road surface. To handle misuse deformations, the contact between the inner surface of the tire and the rim has to be dealt with. Results of the validation process are shown, leading to normal forces up to 70 [kN]. The model can be used together with mbs full vehicle models. One example is the determination of the critical test velocity, which generates the maximum of suspension stresses and can be found using RMOD-K 7. Y1 - 2009 ER - TY - JOUR A1 - Oertel, Christian A1 - Wei, Yintao T1 - Tyre rolling kinematics and prediction of tyre forces and moments: part I - theory and method JF - In: Vehicle system dynamics 50 (2012) 11, 1673-1687 N2 - A new method to describe tyre rolling kinematics and how to calculate tyre forces and moments is presented. The Lagrange–Euler method is used to calculate the velocity and contact deformation of a tyre structure under large deformation. The calculation of structure deformation is based on the Lagrange method, while the Euler method is used to analyse the deformation and forces in the contact area. The method to predict tyre forces and moments is built using kinematic theory and nonlinear finite element analysis. A detailed analysis of the tyre tangential contact velocity and the relationships between contact forces, contact areas, lateral forces, and yaw and camber angles has been performed for specific tyres. Research on the parametric sensitivity of tyre lateral forces and self-aligning torque on tread stiffness and friction coefficients is carried out in the second part of this paper. Y1 - 2012 U6 - https://doi.org/10.1080/00423114.2012.694452 SP - 1673 EP - 1687 ER - TY - JOUR A1 - Wei, Yintao A1 - Oertel, Christian A1 - Shena, Xiaoliang T1 - Tyre rolling kinematics and prediction of tyre forces and moments: part II - simulation and experiment JF - In: Vehicle system dynamics 50 (2012) 11, 1689-1706 N2 - There are two aims for the second part of this paper: verifying the theory presented in the first part through parameter variation and comparison between simulation and experiment, and to study the effect of the belt structure on the cornering properties of radial tyres. Research has been carried out with a passenger car radial tyre and two different kinds of truck or bus radial tyres using both simulation and experiment. This second part of the paper shows that belt structure plays an important role in the generation of tyre forces and moments in addition to the effects of the tread stiffness and friction coefficients. The theory and method presented in this paper opens a new robust way to predict the tyre forces and moments from the tyre design and provides a reliable model for a generation mechanism. Y1 - 2012 U6 - https://doi.org/10.1080/00423114.2012.694453 SP - 1689 EP - 1706 ER - TY - RPRT A1 - Oertel, Christian T1 - Tyre models in vehicle dynamics: theory and application, part 1: vehicle dynamics tyre model Y1 - 2008 ER - TY - RPRT A1 - Oertel, Christian T1 - Tyre models in vehicle dynamics: theory and application, part 2: tyre structure dynamics tyre model Y1 - 2008 ER - TY - RPRT A1 - Oertel, Christian T1 - Reifenmodelle als Komponenten in der Gesamtfahrzeugmodellierung Y1 - 2007 ER - TY - RPRT A1 - Oertel, Christian T1 - RMOD-K V 7.09 Y1 - 2007 ER - TY - RPRT A1 - Oertel, Christian A1 - Friedemann, D. A1 - Deter, T. A1 - Quaissa, A. T1 - Methodenentwicklung Hindernisüberfahrt Y1 - 2005 ER - TY - RPRT A1 - Oertel, Christian T1 - High frequency related tyre modelling Y1 - 2004 ER - TY - JOUR A1 - Oertel, Christian T1 - Eigensystem of tangential contact in tyre models JF - In : Vehicle System Dynamics 38 (2002) 4, 245-260 N2 - Summary In this paper, a simplified model of tangential contact between tyre and rigid surface is investigated. By linearization the eigensystem of the contact equations is obtained and parameter variations are carried out. It is shown, that some vehicle model parameters have great influence on the eigensystem of tangential contact and can determine the highest eigenfrequency of the system vehicle and tyre. Root loci are used to investigate the influence of parameters like vehicle velocity and gridwidth of the discretization. Based on the eigensystem, stability areas of numerical methods in solving the partial differential equations of tangential contact are calculated. Numerical solutions using stiff and nonstiff integrators are compared with respect to the stability areas, computational effort and accuracy. The results are discussed with a view to further development. Y1 - 2002 U6 - https://doi.org/10.1076/vesd.38.4.245.8284 SP - 245 EP - 260 ER - TY - CHAP A1 - Platt, Ulrich A1 - Vollmer, Michael A1 - Pfeilsticker, Klaus T1 - Optical Phenomena in the Atmosphere T2 - In: Springer handbook of lasers and optics : with 163 tables / Träger (ed.). - 2. ed. - Berlin : Springer, 2012. - ISBN 978-3-642-19408-5 Y1 - 2012 SP - 1493 EP - 1517 ER - TY - CHAP A1 - Platt, Ulrich A1 - Pfeilsticker, Klaus A1 - Vollmer, Michael T1 - Radiation and Optics in the Atmosphere T2 - In: Springer handbook of lasers and optics / Träger (ed.). - New York : Springer, 2007 ISBN 978-0-387-95579-7 Y1 - 2007 SP - 1165 EP - 1203 ER - TY - CHAP A1 - Vollmer, Michael T1 - Optical Spectroscopy of Metal Clusters T2 - In: Atomic physics methods in modern research : selection of papers dedicated to Gisbert zu Putlitz on the occasion of his 65th birthday / K. Jungmann ... (ed.). - Berlin [u.a.] : Springer, 1997. - (Lecture notes in physics ; 499) ISBN 3-540-63716-8 Y1 - 1997 SP - 311 EP - 334 ER - TY - JOUR A1 - Hoheisel, W. A1 - Vollmer, Michael A1 - Träger, F. T1 - Laserdesorption von Metallatomen JF - In: Physikalische Blätter 49 (1993) 9, 795 - 799 N2 - Beleuchtet man die Oberfläche eines Festkörpers mit Laserlicht, können darauf adsorbierte Atome oder Moleküle abgelöst werden. Solche Desorptionsprozesse sind in jüngster Zeit in zahlreichen Experimenten untersucht worden, wobei sich das Interesse sowohl auf die Erforschung der zugrundeliegenden Mechanismen als auch auf mögliche Anwendungen dieser Reaktionen, zum Beispiel zur gezielten Modifizierung von Oberflächen, konzentriert. Besonders interessant ist das laserinduzierte Aufbrechen von Bindungen zur Oberfläche dann, wenn es nicht einfach als thermischer Prozeß durch eine Temperaturerhöhung hervorgerufen wird, sondern direkt auf einer elektronischen Anregung beruht. Solche nichtthermischen Prozesse werden selbst für Metalle beobachtet, obwohl die Kopplung der elektronischen Anregung an das Substrat hier besonders schnell abläuft. Der zugrundeliegende Mechanismus beruht auf dem Zusammenspiel einer kollektiven Elektronenoszillation und einer lokalisierten Einzelelektronenanregung, wobei auch nichtlokale optische Effekte in der Metalloberfläche eine wichtige Rolle spielen. Y1 - 1993 U6 - https://doi.org/10.1002/phbl.19930490909 ER - TY - CHAP A1 - Pinno, Frank A1 - Möllmann, Klaus-Peter A1 - Vollmer, Michael T1 - Dark colors of building walls – thermal problems due to solar load T2 - In: InfraMation proceedings. - Vol. 13 (2012) Y1 - 2012 ER - TY - CHAP A1 - Möllmann, Klaus-Peter A1 - Vollmer, Michael T1 - Thermal effects due to focused light from glass fronts T2 - InfraMation proceedings. - Vol. 13 (2012) Y1 - 2012 ER - TY - CHAP A1 - Vollmer, Michael A1 - Möllmann, Klaus-Peter A1 - Wood, S. T1 - Surprising warm edges associated with moisture on surfaces T2 - In: InfraMation proceeding. - Vol. 13 (2012) Y1 - 2012 ER - TY - JOUR A1 - Vollmer, Michael A1 - Möllmann, Klaus-Peter T1 - CO2 Detektion mit IR Kameras: Grundlagen, Experimente und Anwendungen JF - Technisches Messen : tm 79 (2012) 1, 65-72 N2 - Gasdetektion mit Infrarotkameras ist eine relativ neue Anwendung. Aufgrund der industriellen Bedeutung einiger Gase wurden sensitive Kameras mit Schmalbandfiltern entwickelt. Heute gibt es kommerzielle Systeme für die Detektion flüchtiger Kohlenwasserstoffe, Schwefelhexafluorid und Kohlenmonoxid. In dieser Arbeit werden Laborergebnisse der Detektion von CO2 vorgestellt und potenzielle Anwendungen diskutiert. Y1 - 2012 U6 - https://doi.org/10.1524/teme.2012.0189 ER - TY - CHAP A1 - Möllmann, Klaus-Peter A1 - Vollmer, Michael A1 - Winburn, M. T1 - Optics of glass fronts of buildings: the science of skyscraper “death rays” T2 - InfraMation proceedings. - 12 (2011), S. 79-92 Y1 - 2011 SP - 79 EP - 92 ER - TY - CHAP A1 - Vollmer, Michael T1 - Über die Farben der Sonne und des Himmels: Rayleigh- und Miestreuung in Demonstrationsexperimenten T2 - In: CD zur Frühjahrstagung des Fachverbandes Didaktik der Physik in der Deutschen Physikalischen Gesellschaft : Leipzig, 2002 / Red.: V. Nordmeier. - Berlin : Lehmann, [2002]. - 1 CD-ROM. - ISBN 3-936427-11-9 Y1 - 2002 ER - TY - CHAP A1 - Vollmer, Michael T1 - Freihandspektroskopieexperimente im Unterricht und als Hausaufgabe T2 - In: CD zur Frühjahrstagung des Fachverbandes Didaktik der Physik in der Deutschen Physikalischen Gesellschaft : Leipzig, 2002 / Red.: V. Nordmeier. - Berlin : Lehmann, [2002]. - 1 CD-ROM. - ISBN 3-936427-11-9 Y1 - 2002 ER - TY - JOUR A1 - Vollmer, Michael T1 - Finsternisse, Transits, Kometen und Meteore: ein Blick in die Zukunft JF - In: CD zur Frühjahrstagung des Fachverbandes Didaktik der Physik in der Deutschen Physikalischen Gesellschaft, Dresden 2000 ; weiterhin enthalten: Beiträge zu den Lehrertagen und Exponate der Kunstausstellung Grenzflächen bei der Frühjahrstagung Regensburg 2000 / Red.: V. Nordmeier . - Berlin : Lehmann, 2000. - 1 CD-ROM. - ISBN 3-931253-71-6 Y1 - 2000 ER - TY - CHAP A1 - Möllmann, Klaus-Peter A1 - Vollmer, Michael A1 - Karstädt, Detlef T1 - Tieftemperaturexperimente in der Experimentalphysikausbildung an Hochschulen: Experimente mit flüssigem Stickstoff in der Hochschullehre T2 - In: Frühjahrstagung des Fachverbands Didaktik der Physik in der Deutschen Physikalischen Gesellschaft, Ludwigsburg 1999 ; zusätzlich mit den Beiträgen des Lehrertages und der Kunstausstellung bei der Frühjahrstagung 1999 des Arbeitskreises Festkörperphysik in Münster. - Berlin : Lehmann, 1999. - 1 CD-ROM. - ISBN 3-931253-41-4 Y1 - 1999 ER - TY - CHAP A1 - Vollmer, Michael A1 - Möllmann, Klaus-Peter A1 - Shaw, J. A. A1 - Nugent, P. W. T1 - Measurements of the surface temperature of the moon from earth with IR cameras T2 - In: Temperatur 2013 : Fachtagung ; PTB Institut Berlin, 5./6. Juni 2013 ; [Verfahren und Geräte in der Temperatur- und Feuchtemesstechnik ; Tagungsband] / [Hrsg.: Physikalisch-Technische Bundesanstalt, Braunschweig und Berlin]. Fachl. Mitträger: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), Fachgebiet 2.50: Temperatur und Feuchte. - Braunschweig [u.a.] : Physikalisch-Techn. Bundesanst., 2013. - ISBN 3-9810021-8-0 Y1 - 2013 SP - 149 EP - 154 ER - TY - CHAP A1 - Möllmann, Klaus-Peter A1 - Vollmer, Michael T1 - Einfache Charakterisierung der zeitlichen und räumlichen Auflösung von Wärmebildkameras T2 - In: Temperatur 2013 : Fachtagung ; PTB Institut Berlin, 5./6. Juni 2013 ; [Verfahren und Geräte in der Temperatur- und Feuchtemesstechnik ; Tagungsband] / [Hrsg.: Physikalisch-Technische Bundesanstalt, Braunschweig und Berlin]. Fachl. Mitträger: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), Fachgebiet 2.50: Temperatur und Feuchte. - Braunschweig [u.a.] : Physikalisch-Techn. Bundesanst., 2013. - ISBN 3-9810021-8-0 Y1 - 2013 SP - 137 EP - 142 ER - TY - CHAP A1 - Vollmer, Michael A1 - Möllmann, Klaus-Peter T1 - Perspectives of IR imaging for industrial detection and monitoring of CO2 T2 - In: Temperatur 2009 : Fachtagung PTB Institut Berlin, 24./25. Juni 2009 ; [Verfahren und Geräte in der Temperatur- und Feuchtemesstechnik ; Tagungsband] / [Hrsg.: Physikalisch-Technische Bundesanstalt, Braunschweig und Berlin]. Fachl. Mitträger: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), Fachgebiet 2.50: Temperatur und Feuchte. - Braunschweig [u.a.] : Physikalisch-Techn. Bundesanst., 2009. - ISBN 3-9810021-9-9 Y1 - 2009 SP - 27 EP - 36 ER - TY - RPRT A1 - Oertel, Christian A1 - Hempel, J. T1 - Finite Elemente für die Reifenmodellierung Y1 - 2010 ER - TY - JOUR A1 - Oertel, Christian T1 - Misuse load cases and MBS simulation JF - In: Tire technology international 2009, 62-64 Y1 - 2009 SP - 62 EP - 64 ER - TY - CHAP A1 - Wilden, J. A1 - Bergmann, J. P. A1 - Dolles, M. A1 - Reich, S. A1 - Fernandet, S. A1 - Goecke, Sven-Frithjof T1 - Low temperature brazing of zinc coated steel and steel/aluminium joints by setting ZnAl-alloys as brazing material T2 - In: Brazing and soldering : proceedings of the 3rd International Brazing and Soldering Conference, April 24 - 26, 2006, Crowne Plaza Riverwalk Hotel, San Antonio, Texas, USA / sponsored by ASM International, the Materials Information Society; AWS, [American Welding Society]. Ed. by John J. Stephens ... - Materials Park, Ohio: ASM Internat., 2006. - ISBN 0-87170-838-8 Y1 - 2006 SP - 32 EP - 39 ER - TY - CHAP A1 - Goecke, Sven-Frithjof A1 - Dorn, L. T1 - MAG-ChopArc-Schweißen für Feinblech größer gleich 0,2 mm T2 - In: Schweißen und Schneiden 2000 : Vorträge der gleichnamigen Großen Schweißtechnischen Tagung in Nürnberg vom 27. bis 29. September 2000 / Veranst.: DVS, Deutscher Verband für Schweißen und Verwandte Verfahren e.V.. - Als Ms. gedr. - Düsseldorf : Verl. für Schweißen und Verwandte Verfahren, DVS-Verl., 2000. - (DVS-Berichte ; 209). - ISBN 3-87155-667-X Y1 - 2000 SP - 163 EP - 168 ER - TY - CHAP A1 - Dorn, L. A1 - Goecke, Sven-Frithjof T1 - Influence of least active gas additions on pulsed current MIG-welding of aluminium T2 - In: Proceedings of the International Conference on the Joining of Materials JOM-8 : May 12 - 14, 1997, Helsingør, Denmark ; [optimization of joining technology for the industrial application, case study and repair welding, advanced welding technologies and developments] / ed. by the European Institute for the Joining of Materials. - Helsingør : JOM-Inst., 1997. - ISBN 87-89582-04-7 Y1 - 1997 SP - 100 EP - 105 ER - TY - JOUR A1 - Rose, Sascha A1 - Zähr, Julia A1 - Schnick, Michael A1 - Füssel, Uwe A1 - Goecke, Sven-Frithjof A1 - Hübner, Mark T1 - Arc attachments on aluminium during tungsten electrode positive polarity in TIG welding of aluminium JF - In: Welding in the World 55 (2011) 9-10, pp 91-99 N2 - In modem AC power sources, both balance and current of EP (tungsten electrode positive) and EN (tungsten electrode negative) can be readily adjusted. According to conventional assumptions the surface of aluminium workpieces is cleaned during EP but the tungsten electrode is more heated due to electron work function. During EN the tungsten electrode cools down and the workpiece is melted. Therefore, optimal settings of the power source mostly aim for maximal penetration and minimal electrode wear. This paper presents a study of arc attachments in TIG welding on aluminium. Two different arc attachments to the cathodic workpiece could be attested with only one of them actually cleaning the surface. The first one is a spot mode (highly dynamic) that attaches to the edges of oxide layers and cracks them. The second one is also a spot mode, but it attaches to weld pools. It does not clean the surface but heats the base material intensively. Both arc attachment modes compete against each other. As a result, the cleaning area narrows with wider weld pools due to an increasing attachment to the weld pool during EP. The influences on the arc attachment to the aluminium cathode as well as the contradictions in present literature are discussed. Possible adjustments of the AC balance for optimized processes are proposed. Y1 - 2011 U6 - https://doi.org/10.1007/bf03321325 SN - 1878-6669 VL - 55 IS - 9-10 SP - 91 EP - 99 ER - TY - JOUR A1 - Wilden, J. A1 - Jahn, S. A1 - Melahin, N. A1 - Rehfeldt, L. A1 - Luhn, T. A1 - Goecke, Sven-Frithjof A1 - Schmid, E. A1 - Berger, U. T1 - Brazing as the key to resource-efficient and energy-efficient joining in the product life cycle JF - In: Welding and cutting (2010) 5, 301-312 Y1 - 2010 SN - 1612-3433 SP - 301 EP - 312 ER - TY - JOUR A1 - Wilden, J. A1 - Jahn, S. A1 - Milahin, N. A1 - Luhn, T. A1 - Rehfeldt, L. A1 - Goecke, Sven-Frithjof A1 - Schmid, E. A1 - Berger, U. T1 - Perspektiven und Visionen zum Schweissen moderner Stahlwerkstoffe JF - In: Stahl und Eisen 130 (2010) 10, S. 71-75 Y1 - 2010 SN - 0340-4803 SP - 71 EP - 75 ER - TY - JOUR A1 - Ghosh, P. K. A1 - Dorn, L. A1 - Goecke, Sven-Frithjof T1 - Universality of correlationships among pulse parameters for different MIG Welding Power Sources JF - In: The international journal for the joining of materials : JOM 13 (2001), 40-47 Y1 - 2001 SN - 0905-6866 SP - 40 EP - 47 ER - TY - JOUR A1 - Bergmann, J. P. A1 - Wilden, J. A1 - Reich, S. A1 - Goecke, Sven-Frithjof T1 - Methods and solutions for joining plates made from different metals using voltaic arc welding JF - In: Welding International 23 (2009) 12, pp 895-903 N2 - For some years now, the light engineering sector has been in search of welding and/or joining technologies allowing high-speed processing at low temperatures. This way, damage to galvanized coating, for example in the case of steels, could be avoided or significantly reduced. Damage to the galvanized coating represents an outwardly visible phenomenon that can have a negative impact on the component's corrosion resistance. On the other hand, from the metallurgical viewpoint, controlling heat input represents an important way to solve the problems associated with heat joining of metals with incomplete solid-state solubility. The formation of fragile intermetallic phases during cooling, for example, occurs with aluminium/steel or aluminium/titanium. The process and the correct choice of filler materials are key points for the success of the joining method. In the case of the combination of aluminium and steel, zinc represents a suitable filler material, for example for brazing. The melting temperature is around 420°C and the wettability, with regard to galvanized steel, is favoured by the zinc layer, while on the aluminium part, it is possible to avoid the use of flux, thanks to the activating action of the voltaic arc. However, the low melting and vaporization temperatures of zinc make even ‘short arc’ processing rather difficult. Only new developments in electrical sources for welding, and in particular new processes, offer the possibility of reducing the heat input by modifying the ‘short arc’ process. The difficulties described are also valid for the combination of titanium and aluminium, and are associated with the formation of phases such as Ti x A1 y . Again in this case, this paper will present a strategy for joining sheets less than 2 mm thick. In the past years, an increasing number of strategies to join zinc-coated steels can be observed. Brazing represents a profitable way to join zinc-coated steels at low temperatures, reducing or avoiding zinc evaporation. In order to completely avoid damaging zinc coating, the set of ZnAl-fìllers was already investigated for laser brazing of zinc-coated steels as well as for joining steel with aluminium. Furthermore, thanks to new developments in arc wire technology, ZnAl-electrodes can be used for MIG-brazing as well. In this case, the conventional short arc, which normally does not allow brazing with zinc wires as eruption-like evaporation occurs, is modified and controlled. The drop formation on the wire tip, the metal transfer, and the heat input can be controlled and modified very precisely, so that processing of filler material can be performed easily for thin sheets (till 0.8–1.5 mm) and at low-processing speed, below 0.3–0.4 m/min. The control of the heat input occurs due to abruptly reducing the current after short arc. The disadvantages connected with a lower heat input in the base material are a restricted wetting behaviour of the zinc pool on the base material and the low-brazing speed due to a very high cooling rate. The focus of the presented investigation is the development of strategies, in order to enhance process conditions for brazing sheets of zinc-coated steels and aluminium. Y1 - 2009 U6 - https://doi.org/10.1080/09507110902843289 SN - 0950-7116 SP - 895 EP - 903 ER - TY - CHAP A1 - Goecke, Sven-Frithjof A1 - Wilden, J. A1 - Jahn, S. A1 - Reich, S. A1 - Fedtke, A. A1 - Vollertsen, F. A1 - Thomy, C. T1 - Technologiekette zum Produzieren, Reparieren und Recyceln von Produkten in Material-Mix-Bauweise - PROREMIX T2 - In: Die Verbindungs-Spezialisten 2008 : Vorträge und Posterbeiträge der Veranstaltung in Dresden vom 17. bis 19. September 2008 / Veranst.: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V., Düsseldorf. - Düsseldorf : Verl. für Schweißen und Verwandte Verfahren, DVS-Verl., 2008. - (DVS-Berichte ; 250). - ISBN 978-3-87155-256-4 Y1 - 2008 SP - 375 EP - 378 ER - TY - CHAP A1 - Wilden, J. A1 - Bergmann, J. P. A1 - Reich, S. A1 - Neuwöhner, P. A1 - Goecke, Sven-Frithjof T1 - Grundlegende Untersuchungen zum flussmittelfreien Löten von Leichtmetall-Material-Mix Konstruktionen T1 - Basic investigations about the flux-free soldering of multi-material-mix lightweight constructions T2 - In: Hart- und Hochtemperaturlöten und Diffusionsschweißen : Vorträge und Posterbeiträge des 8. internationalen Kolloquiums in Aachen vom 19. bis 21. Juni 2007. - Düsseldorf : DVS-Verl., 2007. - (DVS-Berichte ; 243). - ISBN 978-3-87155-799-6 Y1 - 2007 SP - 176 EP - 182 ER - TY - BOOK T1 - ChopArc : MSG-Lichtbogenschweißen für den Ultraleichtbau / Sven-Frithjof Goecke ... Hrsg.: Fügetechnik und Beschichtungstechnik (FBT) im Institut für Werkzeugmaschinen und Fabrikbetrieb (IWF) der Technischen Universität Berlin KW - Leichtbau KW - Feinblech KW - MAG-Schweißen KW - Kurzlichtbogen KW - Prozessinnovation Y1 - 2005 SN - 3-8167-6766-4 PB - Fraunhofer IRB-Verl. CY - Stuttgart ER - TY - THES A1 - Goecke, Sven-Frithjof T1 - Auswirkungen von Aktivgaszumischungen im vpm-Bereich zu Argon auf das MIG-Impulsschweißen von Aluminium T1 - Effects of active gas admixtures in the vpm range to argon on pulsed MIG welding of aluminium N2 - Die Auswirkungen von Stickstoff, Sauerstoff und Wasserstoffzumischungen im vpm-Bereich zu Argon auf das MIG-Impulsschweißen von Aluminium werden mittels mechanisch-technologischer Untersuchungen, der Hochgeschwindigkeitskinematografie und der Emissions-Spektroskopie ermittelt. Stickstoff- und Sauerstoffzumischungen bewirken bereits unter 0,1 % eine erhebliche Erhöhung des Einbrands und eine Verringerung der Mikroporosität gegenüber Reinargon, während durch Wasserstoffzumischung bis etwa 0,1 % die Mikroporosität kaum beeinflusst wird. Aufgrund einer Erhöhung der Lichtbogenstabilität verbessert sich die Prozesssicherheit durch geringe molekulare Aktivgaszumischungen im Al-Dünnblechbereich. Metalldampf im Kernbereich des MSG-Lichtbogens führt mit einer ausgeprägten Strömung in Richtung Schmelzbad zu einer Kühlung des Plasmas. Dabei erhöht Stickstoff- und Sauerstoffzumischung den Metalldampfpartialdruck im Lichtbogenplasma und kontrahiert den Metalldampfstrahl. Verstärkte Elektronenemission an der Kathodenoberfläche durch hocherhitzte Metalloxide bzw. –nitride verbessert die elektrische Leitfähigkeit begleitet von einer Erhöhung des Plasma-Ionisierungsgrads. N2 - Effects of nitrogen, oxygen and hydrogen admixtures in the vpm range to argon on pulsed MIG welding of aluminium are studied by mechanical-technological investigations, high speed film and emission spectroscopy. Nitrogen and oxygen admixtures of even below 0.1 % cause an considerable increase of penetration and decrease of porosity compared to argon, while hydrogen barely effects porosity up to 0.1 %. In the aluminium thin sheet range the process stability is enhanced by admixing small amounts of molecular active gases due to an arc stability increase. A cooling of the plasma is caused by a metal vapour flow in the centre of the MIG arc column. The partial metal vapour pressure in the arc plasma will be increased by nitrogen and oxygen admixtures and the metal vapour jet contracts. An increased electron emission from the cathode surface improves the electrical conductance followed be an increase of the plasma ionisation rate. KW - MIG; Schweißen; Gas; Aluminium; Magnesium; Spektroskopie; Plasma; Lichtbogen; Metalldampf Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:83-opus-7178 ER - TY - JOUR A1 - Wilden, Johannes A1 - Jahn, Simon A1 - Melahin, Natalie A1 - Rehfeldt, Lars A1 - Luhn, Thomas A1 - Goecke, Sven-Frithjof A1 - Schmid, Eberhard A1 - Berger, Uwe T1 - Löten als Schlüssel zum ressourcen- und energieeffizienten Fügen im Produktlebenszyklus JF - In: Schweissen und Schneiden 62 (2010) 5, 264-277 N2 - Der Einsatz von Lötverfahren zum Fügen reduziert gegenüber der Schweißtechnik die Prozesstemperaturen und ermöglicht sowohl die Realisierung anspruchsvoller Mischverbindungen als auch das Fügen verzinkter Stähle mit minimaler Zinkschichtverletzung. Aktuelle Entwicklungen von Lotwerkstoffen zielen sowohl in Richtung Absenkung der Schmelztemperaturen als auch in Richtung Festigkeitssteigerung, um die Anwendungsmöglichkeiten noch weiter zu vervielfältigen. Dabei unterliegen sowohl Eisenbasislegierungen als auch Systeme auf Kupfer- oder Zinkbasis einer stetigen Weiterentwicklung. Die bereits heute erreichbaren Festigkeiten reichen bis etwa 900 MPa (CuAl8Mn13Ni2Fe2) bei Kupferbasislegierungen und 410 MPa (AnAl7,5Cu2,5 + 180 ppm Mg) bei Zinklegierungen. Neben der Energieeinsparung durch die reduzierten Prozesstemperaturen beim Fügen und der Möglichkeit Hybridstrukturen herzustellen, ergeben sich außerdem Vorteile bei der Reparatur und dem Recycling von Bauteilen. Da der Zusatzwerkstoff unabhängig vom Grundwerkstoff wiederaufgeschmolzen werden kann, sind eine leichtere Reparatur und auch ein Trennen der Bauteile zum Recycling möglich. Dies führt bei Betrachtung des gesamten Produktlebenszyklus zu einer höheren Energieeffizienz und einer Schonung der natürlichen Rohstoffe und Ressourcen. Durch die steigenden Energie- und Werkstoffkosten und den damit verbundenen Kostendruck rückt dieser Aspekt neben der Machbarkeit und Produktivität langsam, aber sicher ins Blickfeld der Unternehmen. Kostenvorteile ergeben sich außerdem durch Betrachtung und Modifikation ganzer Fertigungsketten. Niedrigschmelzende Zusatzwerkstoffe ermöglichen beispielsweise das Fügen verzinkter Halbzeuge ohne Zinkschichtverletzung. Da Halbzeuge in großen Mengen kostengünstiger verzinkt werden können als fertige Konstruktionen, ist das Fügen verzinkter Halbzeuge insgesamt günstiger als das Verzinken geschweißter Stahlkonstruktionen. Y1 - 2010 SP - 264 EP - 277 ER - TY - CHAP A1 - Goecke, Sven-Frithjof T1 - Energiereduziertes Lichtbogen-Fügeverfahren für wärmeempfindliche Werkstoffe T2 - In: Schweißen und Schneiden 2005 : Vorträge der gleichnamigen Großen Schweißtechnischen Tagung in Essen vom 12. bis 14. September 2005 / Veranst.: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V., Düsseldorf . - Düsseldorf : Verl. für Schweißen und Verwandte Verfahren, DVS-Verl., 2005. - (Deutscher Verband für Schweißen und Verwandte Verfahren: DVS-Berichte ; Bd. 237). - ISBN 3-87155-695-5 Y1 - 2005 SP - 44 EP - 48 ER - TY - CHAP A1 - Goecke, Sven-Frithjof A1 - Bergmann, J. P. A1 - Witte, K.-H. T1 - Steigerung der Ressourceneffizienz des MSG-Schweißens T2 - In: DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vorträge der Veranstaltungen in Saarbrücken am 17. und 18. September 2012 / Veranst.: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren. - Düsseldorf : DVS Media, 2012. - (DVS-Berichte / DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V., ISSN 0418-9639 ; 286). - ISBN 3-87155-593-2, 978-3-87155-593-0 Y1 - 2012 SP - 263 EP - 264 ER - TY - CHAP A1 - Goecke, Sven-Frithjof A1 - Hübner, M. A1 - Penning, O. A1 - Höcker, F. A1 - Suchodoll, D. T1 - Steigerung der Ressourceneffizienz des MSG-Schweissens T2 - In: DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vorträge der Veranstaltungen in Saarbrücken am 17. und 18. September 2012 / Veranst.: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren. - Düsseldorf : DVS Media, 2012. - (DVS-Berichte / DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V., ISSN 0418-9639 ; 286). - ISBN 3-87155-593-2, 978-3-87155-593-0 Y1 - 2012 SP - 265 EP - 268 ER - TY - CHAP A1 - Wilden, J. A1 - Jahn, S. A1 - Sabelfeld, N. A1 - Rehfeldt, L. A1 - Luhn, T. A1 - Goecke, Sven-Frithjof A1 - Schmid, E. A1 - Berger, U. T1 - Löten als Schlüssel zum ressourcen - und energieeffizienten Fügen im Produktlebenszyklus T1 - Soldering as a key to resource- and energy-efficient adding in the product life cycle T2 - In: Hart- und Hochtemperaturlöten und Diffusionsschweißen : LÖT 2010; Vorträge und Posterbeiträge des 9. internationalen Kolloquiums in Aachen vom 15. bis 17. Juni 2010 = Brazing, high temperature brazing and diffusion bonding / Gemeinschaftsveranstaltung von DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V., Düsseldorf ... - Düsseldorf : DVS Media, 2010. - (DVS-Berichte ; 263) - ISBN 978-3-87155-589-3 ; 3-87155-589-4 Y1 - 2010 SP - 159 EP - 163 ER - TY - CHAP A1 - Goecke, Sven-Frithjof A1 - Schmaranzer, C. T1 - ColdArc-Schweissen von hoch festen martensitischen Warmbändern für den europäischen Nutzfahrzeugmarkt T2 - In: Die Verbindungs Spezialisten 2009 : Große Schweißtechnische Tagung ; Forschungsforum, Industrieforum, Studentenkongress, Handwerkerforum ; Vorträge der Veranstaltung in Essen vom 14. bis 19. September 2009 / Veranst.: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V. - Düsseldorf : DVS Media, 2009. - (DVS-Berichte / DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V., ISSN 0418-9639 ; 258). - ISBN 978-3-87155-584-8 Y1 - 2009 SP - 129 EP - 132 ER - TY - CHAP A1 - Wilden, Johannes A1 - Jahn, Simon A1 - Reich, Sebastian A1 - Dal-Canton, Sebastian A1 - Goecke, Sven-Frithjof T1 - Controlled short arc technology - A new method for processing heat sensitive materials T2 - In: Future trends in steel development, processing technologies and applications : bringing the automotive, supplier and steel industries together / SCT 2008. Ed. by Bernhard Fuchsbauer und Hans-Joachim Wieland. [Organizer: Steel Institute VDEh, Düsseldorf, Germany]. - Düsseldorf : Verl. Stahleisen, 2008. - ISBN 978-3-514-00755-0 Y1 - 2008 SP - 368 EP - 375 ER - TY - CHAP A1 - Wilden, J. A1 - Bergmann, J. P. A1 - Reich, S. A1 - Neuwöhner, P. A1 - Goecke, Sven-Frithjof T1 - Basic investigations about the flux-free soldering of multi-material-mix lightweight constructions T1 - Grundlegende Untersuchungen zum flussmittelfreien Löten von Leichtmetall-Material-Mix Konstruktionen T2 - In: Hart- und Hochtemperaturlöten und Diffusionsschweißen : Vorträge und Posterbeiträge des 8. Internationalen Kolloquiums in Aachen vom 19. bis 21. Juni 2007. - Als Ms. gedr. - Düsseldorf : DVS-Verl., 2007. - (DVS-Berichte ; 243). - ISBN 978-3-87155-799-6 Y1 - 2007 SP - 176 EP - 182 ER - TY - JOUR A1 - Edel, Karl-Otto A1 - Hintze, Hartmut A1 - Korn, Monika T1 - Analysis of a solid railway wheel breakage JF - In: Rail international Vol. 23 (1992) 1, pp 28-40 Y1 - 1992 SN - 0020-8442 SP - 28 EP - 40 ER - TY - CHAP A1 - Grohmann, H.-D. A1 - Schnitzer, T. A1 - Edel, Karl-Otto T1 - Head checks - and further damages T2 - In: Enhancing safety, environment and economy through research : 6th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Gothenburg, Sweden, June 10 - 13, 2003; CM 2003; proceedings / Chalmers; CHARMEC. [Ed.: Anders Ekberg .̤] Vol. 1. - Gothenburg, Sweden : CHARMEC, Chalmers University of Technology, 2003. - ISBN 91-631-3928-6 Y1 - 2003 SP - 99 EP - 104 ER - TY - CHAP A1 - Böhm, A. A1 - Schaper, M. A1 - Jaeger, G. A1 - Edel, Karl-Otto T1 - Gefüge und Ermüdungsrissausbreitungsuntersuchungen an der 55 Jahre alten, geschweissten Strelasundbrücke T2 - In: Metallographie : Gefüge und Eigenschaften metallischer und nichtmetallischer Werkstoffe; Berichte der Metallographie-Tagung Aachen, 29. September bis 1. Oktober 1993 / Bearb.: Ludwig Hachtel ... Veranst.: Fachausschuss Metallographie der Deutschen Gesellschaft für Materialkunde ... - München ; Wien : Hanser, 1994. - (Praktische Metallographie / Sonderbände ; 25). - ISBN 3-446-17783-3 Y1 - 1994 SP - 319 EP - 330 ER - TY - JOUR A1 - Cannon, D. F. A1 - Edel, Karl-Otto A1 - Grassie, S. L. A1 - Sawley, K. T1 - Rail defects: an overview JF - In: Fatigue & Fracture of Engineering Materials & Structures Volume 26 (2003) 10, pp 865–886 N2 - For about 150 years, the steel rail has been at the very heart of the world's railway systems. The rail works in a harsh environment and, as part of the track structure, it has little redundancy; thus, its failure may lead to catastrophic derailment of vehicles, the consequences of which can include death, injury, costs and loss of public confidence. These can have devastating and long-lasting effects on the industry. Despite the advances being made in railway permanent way engineering, inspection and rail-making technology, continually increasing service demands have resulted in rail failure continuing to be a substantial economic burden and a threat to the safe operation of virtually every railway in the world. This paper presents an overview of rail defects and their consequences from the earliest days of railways to the present day. Y1 - 2003 U6 - https://doi.org/10.1046/j.1460-2695.2003.00693.x SN - 8756-758X SP - 865 EP - 886 ER - TY - CHAP A1 - Edel, Karl-Otto T1 - Fracture Mechanics Analysis of the Residual Service Life of the Welded Main Girders of the Highway Bridges of Ruedersdorf T2 - In: Fatigue design : papers presented at the International Symposium on Fatigue Design / organized and sponsored by VTT (Technical Research Centre of Finland) and held in Helsinki, Finland. Co-sponsored by the European Structural Integrity Society (ESIS) and the Technology Development Centre of Finland (TEKES). Ed. by J Solin ... - London : Mechanical Engineering Publ., 1993. - (ESIS publication // European Structural Integrity Society, ISSN 1566-1369 ; 16). - ISBN 0-85298-884-2 Y1 - 1993 SP - 109 EP - 120 ER - TY - JOUR A1 - Boudnitski, Grigori A1 - Edel, Karl-Otto T1 - Spannungsintensitätsfaktoren für Risse in Schienen JF - In: Materialprüfung : MP Vol. 47 (2005) 11-12, 674-681 N2 - Eisenbahnschienen können unter Betriebsbedingungen brechen. Mit Hilfe der Bruchmechanik lassen sich das Risswachstums- und Bruchverhalten der Schienen untersuchen. Um dieses Verhalten z.B. im Hinblick auf die zerstörungsfreie Prüfung der Schienen im Gleis analysieren zu können, müssen die folgenden Einzelheiten bekannt sein: Betriebs- und Bruchbedingungen (Schienentyp, Radkräfte, Biegemomente, Temperaturen, Normalkräfte und Eigenspannungen), die bruchmechanischen Eigenschaften des Schienenstahls unter Betriebsbedingungen, die Form der Risse und die entsprechenden Spannungsintensitätsfaktoren. Für Schienen des Typs R65 sind die Spannungsintensitätsfaktoren für Querrisse, die von der Fahrfläche ausgehen, mit dem FEM-Programm ANSYS berechnet worden für die radkraftbedingte Biegung, für Temperatur-Normalkräfte sowie für die Längseigenspannungen. Y1 - 2005 U6 - https://doi.org/10.3139/120.100700 SN - 0025-5300 SP - 674 EP - 681 ER - TY - JOUR A1 - Boudnitski, Grigori A1 - Edel, Karl-Otto A1 - Schumann, Lars T1 - Bewertung der Rissausbreitung an Federstellen in Zungenschienen JF - In: Materialprüfung : MP Vol. 46 (2004) 7-8, 390-396 N2 - Im Bereich des Querschnittsübergangs der Federstelle bilden sich unter ungünstigen Umständen im Fuß von Zungenschienen Ermüdungsrisse, die letztlich den Bruch der Schiene verursachen können. Zur Qualifizierung der Bewertungskriterien, d.h. des Prüfzyklusses der zerstörungsfreien Prüfung der Zungenschienen, wird die bruchmechanische Analyse als Monte-Carlo-Simulation gestaltet. Aus dem ungünstigsten Risswachstumsverhalten wird für die zerstörungsfrei ermittelte Rissgröße der erforderliche Prüfzyklus in Abhängigkeit von der Betriebsbelastung abgeleitet. Y1 - 2004 U6 - https://doi.org/10.3139/120.100604 SN - 0025-5300 SP - 390 EP - 396 ER - TY - CHAP A1 - Boudnitski, Grigori A1 - Edel, Karl-Otto A1 - Schumann, Lars T1 - Die Bewertung der Rissausbreitung an Federstellen in Zungenschienen T2 - In: 35. Tagung des DVM-Arbeitskreises Bruchvorgänge, 18. und 19. Februar 2003 in Freiberg : Themenschwerpunkt: Fortschritte der Bruch- und Schädigungsmechanik, Simulationsmethoden der Bruchmechanik. - Berlin : DVM, 2003. - (Deutscher Verband für Materialforschung und -prüfung: DVM-Bericht ; 235) Y1 - 2003 SP - 151 EP - 160 ER - TY - CHAP A1 - Ogwu, Abraham A1 - Hellwig, Thomas A1 - Doherty, Saul A1 - Haddow, David A1 - Möllmann, Klaus-Peter A1 - Placido, Francis T1 - Electrochemical investigation of the stability and corrosion resistance of boron phosphide films prepared by PECVD T2 - In: Window and dome technologies and materials IX : 28 - 29 March 2005, Orlando, Florida, USA ; [held as part of the SPIE Defense & Security Symposium] / sponsored and publ. by SPIE, the International Society for Optical Engineering. Cooperating organizations: Ball Aerospace & Technologies Corporation (USA) ... Randal W. Tustison, chair/ed. - Bellingham, Wash. : SPIE, 2005. - (Proceedings // SPIE, International Society for Optical Engineering : P, ISSN 0038-7355 ; 5786). - ISBN 0-8194-5771-X Y1 - 2005 SP - 365 EP - 372 ER - TY - CHAP A1 - Keßler, E. A1 - Baier, V. A1 - Dillner, U. A1 - Müller, J. A1 - Berger, A. A1 - Gärtner, R. A1 - Meitzner, S. A1 - Möllmann, Klaus-Peter T1 - High-Temperature Resistant Infrared Sensing Head Sensor T2 - In: Sensor 2005 : proceedings ; 12th international conference, Nürnberg, Germany, 10 - 12 May 2005 ; an event of the AMA Association for Sensor Technology / [Sensor Conference. Publ.: AMA Service GmbH. Chairman R. Werthschützky]. - Wunstorf : AMA Service Ges., 2005. - Vol. 1 Y1 - 2005 SP - 73 EP - 78 ER - TY - RPRT A1 - Möllmann, Klaus-Peter A1 - Vollmer, Michael A1 - Karstädt, Detlef A1 - Lutz, Norbert A1 - Pinno, Frank T1 - Entwicklung und Anwendung von Methoden der Infrarotthermographie T2 - In: Forschungsbericht der Fachhochschule Brandenburg 2001 Y1 - 2001 ER - TY - CHAP A1 - Möllmann, Klaus-Peter A1 - Vollmer, Michael T1 - IR Imaging of Mircosystems: Special Requirements, Experiments and Applications T2 - In: Sensor + Test Conferences 2011 : Nürnberg Exhibition Centre, Germany, 7. - 9.6.2011 ; [including] SENSOR 2011, 15th International Conference on Sensors and Measurement Technology, OPTO 2011, photonic metrology, 10th International Conference on Optical Technologies for Sensing and Measurement, IRS2 2011, 12th International Conference on Infrared Sensors & Systems ; short proceedings / AMA Fachverband für Sensorik e.V. - Wunstorf/Germany : AMA Service GmbH, 2011. - ISBN 978-3-9810993-8-6 Y1 - 2011 SP - 236 ER - TY - CHAP A1 - Vollmer, Michael A1 - Möllmann, Klaus-Peter T1 - IR Imaging of CO~2: Basics, Experiments, and Potential Industrial Applications T2 - In: Sensor + Test Conferences 2011 : Nürnberg Exhibition Centre, Germany, 7. - 9.6.2011 ; [including] SENSOR 2011, 15th International Conference on Sensors and Measurement Technology, OPTO 2011, photonic metrology, 10th International Conference on Optical Technologies for Sensing and Measurement, IRS2 2011, 12th International Conference on Infrared Sensors & Systems ; short proceedings / AMA Fachverband für Sensorik e.V. - Wunstorf/Germany : AMA Service GmbH, 2011. - ISBN 978-3-9810993-8-6 Y1 - 2011 SP - 240 ER - TY - CHAP A1 - Möllmann, Klaus-Peter A1 - Loose, Harald A1 - Lutz, Norbert A1 - Pinno, Frank T1 - Emissionsgradkompensierte Temperaturmessung an hochreflektierenden Leichtmetalloberflachen T2 - In: Temperatur 2003 : [Verfahren und Geräte in der Temperatur- und Feuchtemesstechnik] ; Tagung Berlin, 8. und 9. September 2003 / VDI-VDE-Gesellschaft Mess- und Automatisierungstechnik. - Düsseldorf : VDI-Verl., 2003. - (VDI-Berichte , ISSN 0083-5560 ; 1784). - ISBN 3-18-091784-9 Y1 - 2003 SP - 179 EP - 186 ER - TY - JOUR A1 - Schmidt, V. A1 - Möllmann, Klaus-Peter A1 - Muilwijk, F. A1 - Kalz, S. A1 - Stoppiglia, H. T1 - Radiation thermometry on aluminium JF - In: Aluminium : international journal for industry, research and application 78(2002), 897-901 Y1 - 2002 SN - 0002-6689 SP - 897 EP - 901 ER - TY - CHAP A1 - Schmidt, V. A1 - Möllmann, Klaus-Peter A1 - Muilwijk, F. A1 - Stoppiglia, H. T1 - Radiation thermometry on aluminium T2 - In: Proc. of the ALUMEX Conference, Dubai, December 10 - 12, 2002 Y1 - 2002 ER - TY - JOUR A1 - Herrman, K. H. A1 - Auth, J. A1 - Möllmann, Klaus Peter A1 - Tomm, J. W. A1 - Bottner, H. A1 - Lambrecht, A. A1 - Tacke, M. A1 - Kolesnikov, V. A1 - Yunovich, A. E. A1 - Fedorenko, A. I. A1 - Mironov, O. A. A1 - Sipatov, A. Yu T1 - Band offsets in Eu-containing lead chalcogenides and lead chalcogenide superlattices from spectroscopic data JF - In: Semiconductor Science and Technology Vol. 8 (1993) 1S, pp S176-S179 N2 - The results of an experimental study of the optical and photoelectrical properties of Eu-containing lead chalcogenides and superlattices are presented. From both sets of experiments band offset data for the lead chalcogenide-europium chalcogenide heterojunction are derived. The results are compared with the data obtained from a linear interpolation of the band structures between those of the binaries. Y1 - 1993 U6 - https://doi.org/10.1088/0268-1242/8/1S/040 SN - 1361-6641 SP - S176 EP - S179 ER - TY - BOOK ED - Lüthy, Anja T1 - Social Media und Online-Kommunikation für das Krankenhaus : Konzepte, Methoden, Umsetzung KW - Onlinecommunity KW - Marketinginstrument KW - Krankenhaus Y1 - 2014 SN - 978-3-95466-009-4 PB - MWV Medizinisch Wissenschaftliche Verl.-Ges. CY - Berlin ER - TY - CHAP A1 - Wilden, J. A1 - Jahn, S. A1 - Reich, S. A1 - Goecke, Sven-Frithjof T1 - Technologien zum flussmittelfreien Fügen von Leichtmetall-Material-Mix- Konstruktionen T2 - In: Schweißtechnik und Fügetechnik - Schlüsseltechnologien der Zukunft = Welding and joining - key technologies for the future / 10. Internationales Aachener Schweißtechnik-Kolloquium, 24. - 25.10.2007. Hrsg.: Uwe Reisgen. Red. Bearb.: Konrad Willms ; Nikolaus Wagner. [Veranst. ISF Aachen ...]. - Aachen : Shaker, 2007. - (Aachener Berichte Fügetechnik ; 2007,1). - 3-8322-6644-5, 978-3-8322-6644-8 Y1 - 2007 SP - 491 EP - 500 ER - TY - CHAP A1 - Goecke, Sven-Frithjof A1 - Kruscha, J. T1 - Theorie und Praxis des Elektrodenaufschmelzverhaltens und des Werkstoffübergangs im Kurzlichtbogenbereich T2 - In: Die Verbindungs-Spezialisten : Kurzfassungen und Vorträge der gleichnamigen Tagungen in Basel vom 16. bis 18. September 2007 / Veranst.: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V., Düsseldorf. In Kooperation mit: Institut de Soudure, Villepinte (Frankreich) ... - Düsseldorf : Verl. für Schweißen und Verwandte Verfahren, DVS-Verl., 2007. - (Deutscher Verband für Schweißen und Verwandte Verfahren: DVS-Berichte ; Bd. 244). - ISBN 978-3-87155-250-2 Y1 - 2007 SP - 245 EP - 258 ER - TY - CHAP A1 - Wilden, J. A1 - Bergmann, J. P. A1 - Reich, S. A1 - Veron, F. A1 - Möller, L. A1 - Goecke, Sven-Frithjof T1 - Methoden und Strategien zum flussmittelfreien Fügen von Mischverbindungen durch Kombination der geregelten Lichtbogentechnik und der Lasertechnik T2 - In: Schweißen und Schneiden 2006 : Vorträge der gleichnamigen Großen Schweißtechnischen Tagung in Aachen vom 20. bis 22. September 2006 / Veranst.: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V., Düsseldorf. - Düsseldorf : Verl. für Schweißen und Verwandte Verfahren, DVS-Verl., 2006. - (Deutscher Verband für Schweißen und Verwandte Verfahren: DVS-Berichte ; Bd. 240). - ISBN 3-87155-699-8 ; 978-3-87155-699-9 Y1 - 2006 SP - 120 EP - 125 ER - TY - CHAP A1 - Dorn, L. A1 - Goecke, Sven-Frithjof T1 - Vorteile des wärmearmen ChopArc-Schweißens und -Lötens bei beschichteten und artverschiedenen Blechen für Leichtfahrzeuge T2 - In: Fügetechnik im Automobilbau : Vorträge ; 9. - 11. Mai 2001 in Berlin / Deutscher Verband für Materialforschung u. -prüfung e.V. - Berlin : DVM, 2001. - (Deutscher Verband für Materialforschung und -prüfung: Vorträge ; 2001) (Deutscher Verband für Materialforschung und -prüfung: DVM-Bericht ; 668) Y1 - 2001 SP - 93 EP - 108 ER - TY - CHAP A1 - Dorn, Lutz A1 - Goecke, Sven-Frithjof T1 - Choparc for superior MAG-welding of thin sheets with a thickness of less than 0,2 mm T2 - In: Proceedings of the International Conference on the Joining of Materials JOM-10 : May 11 - 14, 2001, Helsingør - Denmark / ed. by the Institute for the Joining of Materials . - Gilleleje, 2001. - ISBN 87-89582-097-1 Y1 - 2001 SP - 84 EP - 89 ER - TY - CHAP A1 - Dorn, D. A1 - Goecke, Sven-Frithjof T1 - Influence of very low percentage active gas components in argon on pulsed current welding T2 - In: 30th International Symposium on Automotive Technology and Automation, Florence, Italy, 16th - 19th June 1997 ; the largest European automotive forum with international participation ; [proceedings] / [ed. by: Dieter Roller] Teil: Materials for energy-efficient vehicles. Paint and powder coating applications in the automotive industries. - Croydon : Automotive Automation Ltd., 1997. - ISBN 0-947719-94-6 Y1 - 1997 SP - 221 EP - 228 ER - TY - CHAP A1 - Wilden, J. A1 - Jahn, S. A1 - Reich, S. A1 - Goecke, Sven-Frithjof T1 - Technologien zum flussmittelfreien Fügen von Leichtmetall-Material-Mix-Konstruktionen T1 - Methods for the flux-free joining of muiti-material-mix lightweight constructions T2 - In: Schweißtechnik und Fügetechnik - Schlüsseltechnologien der Zukunft = Welding and joining - key technologies for the future / 10. Internationales Aachener Schweißtechnik-Kolloquium, 24. - 25.10.2007. Hrsg.: Uwe Reisgen. Red. Bearb.: Konrad Willms ; Nikolaus Wagner. [Veranst. ISF Aachen ...]. - Aachen : Shaker, 2007. - ISBN 978-3-8322-6644-8 ; 3-8322-6644-5 Y1 - 2007 SP - 491 EP - 502 ER - TY - JOUR A1 - Gärtner, R. A1 - Klatt, P. A1 - Loose, Harald A1 - Lutz, Norbert A1 - Möllmann, Klaus-Peter A1 - Pinno, Frank A1 - Muilwijk, F. A1 - Kalz, S. A1 - Stoppiglia, H. T1 - New Aluminium Radiation Thermometry JF - In: Aluminium : international journal for industry, research and application Vol. 80 (2004), S. 642-647 Y1 - 2004 SN - 0002-6689 SP - 642 EP - 647 ER - TY - CHAP A1 - Ogwu, Abraham A1 - Hellwig, Thomas A1 - Doherty, Saul A1 - Haddow, David A1 - Möllmann, Klaus-Peter A1 - Placido, Frank T1 - Surface characterisation and surface measurements on Boron Phosphide films prepared by PECVD T2 - In: Window and dome technologies and materials IX : 28 - 29 March 2005, Orlando, Florida, USA ; [held as part of the SPIE Defense & Security Symposium] / sponsored and publ. by SPIE, the International Society for Optical Engineering. Cooperating organizations: Ball Aerospace & Technologies Corporation (USA) ... Randal W. Tustison, chair/ed. - Bellingham, Wash. : SPIE, 2005. - (Proceedings // SPIE, International Society for Optical Engineering : P, ISSN 0038-7355 ; 5786). - ISBN 0-8194-5771-X Y1 - 2005 SP - 130 EP - 136 ER - TY - JOUR A1 - Edel, Karl-Otto T1 - Effects of securing temperatures on crack propagation in railway rails JF - In: Rail international Vol. 32 (2001), 36-42 Y1 - 2001 SN - 0020-8442 SP - 36 EP - 42 ER -