TY - GEN A1 - Löwe, Katharina A1 - Dalijono, Taufan T1 - Practical Tool for Human Factor Analysis Y1 - 2012 ER - TY - JOUR A1 - Goecke, Sven-Frithjof A1 - Syed, Arshad Alam A1 - Ebert-Spiegel, Michael A1 - De, Amitava T1 - Probing current, voltage and metal transfer characteristics in pulsed arc and in conventional and a novel low energy input short arc GMAW JF - Quarterly Journal of the Japan Welding Society Y1 - 2013 U6 - https://doi.org/10.2207/qjjws.31.26s VL - 31 IS - 4 SP - 26s EP - 30s ER - TY - JOUR A1 - Goecke, Sven-Frithjof A1 - Makwana, Pinaac A1 - Shome, Mahadev A1 - De, Amitava T1 - Probing joint strength and distortion in gas metal arc lap joining of aluminum and steel sheets JF - Welding in the World Y1 - 2019 U6 - https://doi.org/10.1007/s40194-018-0653-z VL - 63 IS - 2 SP - 229 EP - 236 PB - Springer ER - TY - CHAP A1 - Knobloch, Florian A1 - Slomczyk, Sebastian T1 - Pulsfrequenzmodulierte Visible Light Communication für vernetzte LED Beleuchtung T2 - 4. Elektronik lighting congress 2014, München, 27. Mai 2014, N2 - Für individualisierte Beleuchtungen, bedarf es einer Kommunikation zwischen den Leuchten. Hierfür kann LED-Licht genutzt werden. Für die optische kabellose Kommunikation im sichtbaren Lichtbereich (bzw. Visible Light Communication – VLC) kann eine diskrete Pulsfrequenzmodulation (PFM) für den Einsatz mit indirektem Licht genutzt werden. Ein Konzept zur Pulsfrequenzmodu-lation (PFM) wird vorgestellt und experimentell analysiert. Aufbau und Funktionsweise der PFM werden anhand einer Simulation des Empfängers vorgestellt. Daran anschließend wird in der Sicherungsschicht das Listen Before Talk Verfahren zum koordinierten Kanalzugriff erläutert. KW - VLC, Visible Light Communication, Optical wireless Network, Light Energy saving, Pulsfrequenzmodulation, PFM, pulse frequency modulation Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus4-8534 ER - TY - JOUR A1 - Makwana, Pinaac A1 - Goecke, Sven-Frithjof A1 - De, Amitava T1 - Real-time heat input monitoring towards robust GMA brazing JF - Science and Technology of Welding & Joining Y1 - 2019 U6 - https://doi.org/10.1080/13621718.2018.1470290 VL - 24 IS - 1 SP - 1 EP - 11 PB - Taylor & Francis ER - TY - THES A1 - Schmidt, Norman T1 - Rückgewinnung der Frequenzinformation aus PWM-modulierten Licht zur Anwendung für die Visible Light Communication (VLC) N2 - Gegenstand dieser Arbeit, ist die Rückgewinnung von Frequenzinformationen aus pulsweitenmoduliertem Licht. Einleitend wird auf das zu bearbeitende Thema eingegangen. Anschließend werden die Grundlagen erläutert, welche für das Verständnis der Arbeit notwendig sind. Dem folgt ein Entwurf mit mehreren Möglichkeiten zur Herleitung eines Satzes von PWM-Frequenzen. Danach wird auf Grundlage der PWM-Frequenzen, eine Simulation für die Frequenzrückgewinnung durchgeführt. Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus4-8590 ER - TY - GEN A1 - Kraska, Martin A1 - Mckeprang, Jürgen T1 - Seilgeführter Auftriebskörper BT - Patent Y1 - 2003 ER - TY - JOUR A1 - Lübcke, Andrea A1 - Braenzel, Julia A1 - Dehlinger, Aurelie A1 - Schnürer, Matthias A1 - Stiel, Holger A1 - Guttmann, Peter A1 - Rehbein, Stefan A1 - Schneider, Gerd A1 - Werner, Stephan A1 - Kemmler, Roman A1 - Ritter, Sebastian A1 - Raugust, Marc A1 - Wende, Torsten A1 - Behrendt, Marcel A1 - Regehly, Martin T1 - Soft X-ray nanoscale imaging using a sub-pixel resolution charge coupled device (CCD) camera JF - Review of Scientific Instruments Y1 - 2019 U6 - https://doi.org/10.1063/1.5053593 VL - 90 IS - 4 PB - American Institute of Physics ER - TY - CHAP A1 - Thiers, Angelina A1 - Schrader, Thomas A1 - Orlowski, Katja ED - Honekamp, Wilfried T1 - Sportanalyse mittels Shimmer™-Sensoren T2 - 13. Nachwuchswissenschaftlerkonferenz mitteldeutscher Fachhochschulen, Hochschule Zittau/Görlitz, in Görlitz am 19. April 2012, Tagungsband Y1 - 2012 SN - 978-3-86870-436-5 SP - 275 EP - 280 PB - Re Di Roma-Verlag CY - Remscheid ER - TY - JOUR A1 - Rudenko, Maryia A1 - Gaponenko, Nikolai A1 - Litvinov, Vladimir A1 - Ermachikhin, Alexander A1 - Chubenko, Eugene A1 - Borisenko, Victor A1 - Mukhin, Nikolay A1 - Radyush, Yuriy A1 - Tumarkin, Andrey A1 - Gagarin, Alexander T1 - Structural Dependent Eu3+ Luminescence, Photoelectric and Hysteresis Effects in Porous Strontium Titanate JF - Materials KW - europium luminescence KW - poporous film KW - strontium titanate KW - resistive switching hysteresis KW - photocurrent Y1 - 2020 U6 - https://doi.org/10.3390/ma13245767 VL - 13 IS - 24 PB - MDPI ER - TY - JOUR A1 - Oertel, Christian A1 - Liu, Zhe A1 - Zhou, Fuqiang A1 - Wei, Yintao T1 - Three-dimensional vibration of a ring with a noncircular cross-section on an elastic foundation JF - Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science KW - Vibration of rings KW - modal analysis KW - three-dimensional ring model KW - elastic foundation KW - radial tires Y1 - 2018 U6 - https://doi.org/10.1177/0954406217720823 VL - 232 IS - 13 SP - 2381 EP - 2393 ER - TY - JOUR A1 - Oertel, Christian A1 - Hempel, J. T1 - Tire Model Toolbox. University Focus JF - Tire technology international Y1 - 2014 SN - 1462-4729 SP - 62 EP - 65 ER - TY - CHAP A1 - Steinfurth, Maximilian A1 - Wundrich, Ingo A1 - Kindsmüller, Martin Christof ED - Prinz, Wolfgang T1 - TouchEEG: Eine MultitouchAnwendung für die EEG-Auswertung T2 - Mensch und Computer 2016 - Tagungsband, 4. - 7. September, Aachen KW - EEG KW - Biosignalverarbeitung KW - Multitouch Y1 - 2016 U6 - https://doi.org/10.18420/muc2016-mci-0115 PB - Gesellschaft für Informatik e.V. CY - Aachen ER - TY - CHAP A1 - Goecke, Sven-Frithjof A1 - Ebert-Spiegel, Michael T1 - Towards a More Robust Automated MAG Welding T2 - 2015 IEEE International Conference on Automation Science and Engineering (CASE) : 24 - 28 Aug. 2015, Gothenburg, Sweden Y1 - 2015 U6 - https://doi.org/10.1109/coase.2015.7294114 SP - 417 EP - 418 PB - IEEE CY - Piscataway, NJ ER - TY - CHAP A1 - Wikarski, Dietmar A1 - Aurah, Catherine A1 - Ebinga Osore, Emmanuel A1 - Mengich, Gladys A1 - Mutua, Gershom A1 - Ndiema, Alice A1 - Nkangi, Felister Nyaera A1 - Ogemah, Vitalis A1 - Okoth, Patrick A1 - Ondulo, Jasper A1 - Orata Omoto, Francis A1 - Wambui Mwangi, Mary A1 - Namayi, Vivian A1 - Flassig, Peter A1 - Loose, Harald A1 - Malessa, Reiner A1 - Piorr, Hans-Peter A1 - Schrader, Thomas A1 - Weber, Christian-Toralf ED - Wikarski, Dietmar T1 - Towards Practice-oriented Higher Education for Sustainable Rural Development in Western Kenya BT - Proceedings of the final workshop of the DAAD funded project ProUniEdu-WeK Brandenburg an der Havel, August 10-12th, 2021 N2 - The workshop proceedings contain the written versions of the presentations of the Kenyan participants of the final workshop of the DAAD-funded cooperation project "Practice-oriented Higher Education in Western Kenya" (ProUniEdu-WeK) in August 2021 at the Brandenburg University of Applied Sciences (THB). The contributions give an impression of what has been achieved in the last years on the way to practice-oriented higher education in the participating departments of the Masinde Muliro University of Science and Technology (MMUST) in cooperation with its partners from the THB and what is planned to be done in the years to come. KW - Manufacturing KW - 3D Printing KW - Additive Manufacturing KW - Bio-slurry KW - Biodigester KW - Biogas KW - CAD/CAM KW - Certification KW - CFD KW - Chronic illnesses KW - Collaboration KW - Communication Strategies KW - Competence KW - Computational Algorithms KW - COVID-19 KW - Cross-Flow Turbine KW - Diagnostic Toolkit KW - Digital Economy KW - Digitalisation KW - E-Health KW - Efficiency KW - Finite Element Method KW - Food Security KW - Health Communication KW - Higher Education KW - IoT KW - Learning Tool KW - Milling KW - Multi-disciplinarity KW - Organic Agriculture KW - Organic Farming KW - Organic Products KW - Pedagogy KW - Programming KW - Prosthetics KW - Prototyping KW - Robotics KW - Rural Areas KW - Rural Community KW - Rural Populations KW - Statistical Analysis KW - Telemedicine Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus4-27420 PB - Technische Hochschule Brandenburg CY - Brandenburg an der Havel ET - 1st edition ER - TY - CHAP A1 - Kraska, Martin T1 - Transferangebote zum Leichtbau aus Forschung und Lehre an der Fachhochschule Brandenburg T2 - Metalldialog Ostbrandenburg in Eisenhüttenstadt – "Metall trifft Leichtbau“, 17.09.2015 Y1 - 2015 ER - TY - JOUR A1 - Oertel, Christian A1 - Wei, Yintao T1 - Tyre rolling kinematics and prediction of tyre forces and moments: part I - theory and method JF - In: Vehicle system dynamics 50 (2012) 11, 1673-1687 N2 - A new method to describe tyre rolling kinematics and how to calculate tyre forces and moments is presented. The Lagrange–Euler method is used to calculate the velocity and contact deformation of a tyre structure under large deformation. The calculation of structure deformation is based on the Lagrange method, while the Euler method is used to analyse the deformation and forces in the contact area. The method to predict tyre forces and moments is built using kinematic theory and nonlinear finite element analysis. A detailed analysis of the tyre tangential contact velocity and the relationships between contact forces, contact areas, lateral forces, and yaw and camber angles has been performed for specific tyres. Research on the parametric sensitivity of tyre lateral forces and self-aligning torque on tread stiffness and friction coefficients is carried out in the second part of this paper. Y1 - 2012 U6 - https://doi.org/10.1080/00423114.2012.694452 SP - 1673 EP - 1687 ER - TY - JOUR A1 - Wei, Yintao A1 - Oertel, Christian A1 - Shena, Xiaoliang T1 - Tyre rolling kinematics and prediction of tyre forces and moments: part II - simulation and experiment JF - In: Vehicle system dynamics 50 (2012) 11, 1689-1706 N2 - There are two aims for the second part of this paper: verifying the theory presented in the first part through parameter variation and comparison between simulation and experiment, and to study the effect of the belt structure on the cornering properties of radial tyres. Research has been carried out with a passenger car radial tyre and two different kinds of truck or bus radial tyres using both simulation and experiment. This second part of the paper shows that belt structure plays an important role in the generation of tyre forces and moments in addition to the effects of the tread stiffness and friction coefficients. The theory and method presented in this paper opens a new robust way to predict the tyre forces and moments from the tyre design and provides a reliable model for a generation mechanism. Y1 - 2012 U6 - https://doi.org/10.1080/00423114.2012.694453 SP - 1689 EP - 1706 ER - TY - CHAP A1 - Wieneke-Toutaoui, Burghilde A1 - Schmütz, Jörg A1 - Fritz, Alfred Herbert T1 - Urformen T2 - Fertigungstechnik KW - Fertigungstechnik Y1 - 2018 SN - 978-3-662-56534-6 SN - 978-3-662-56535-3 U6 - https://doi.org/10.1007/978-3-662-56535-3_2 SP - 7 EP - 132 PB - Springer Vieweg CY - Berlin / Heidelberg ET - 12 ER - TY - GEN A1 - Kraska, Martin A1 - Hönl, Fabian A1 - Rathmann, Jan T1 - Verfahren und Anordnung zum zerstörungsfreien Prüfen von Fügeverbindungen und Materialdefekten in Bauteilen mittels Induktions-Thermografie T2 - Method for non-destructive thermographic testing of resistance point welding connections and cracks of components, involves detecting radiated temperature profile of heating zone by camera through recess, and subsequently evaluating profile Y1 - 2014 ER -