TY - GEN A1 - Schnitzer, Thomas A1 - Edel, Karl-Otto T1 - Fracture mechanical analysis and assessment of the extension of rolling contact fatigue cracks in railway rails N2 - Rolling contact fatigue generates cracks on the running surface of high strength railway rails which grow under a small angle into the rail head. These cracks can cause in its last stage the fracturing of the rail. The crack extension behaviour is – as the origin of these cracks too – influenced by the cold working of the rail steel. The crack growth in the first stage is fracture mechanically analyzed by means of two-dimensional modelling. The simulation results are assessed for the use of rail grinding. A criterion for the change of the crack growth direction could not be derived, but the following stages of the crack growth in the transverse direction and the final fracture and the conditions for secondary fractures are considered. Rolling contact fatigue generates cracks on the running surface of high strength railway rails which grow under a small angle into the rail head. These cracks can cause in its last stage the fracturing of the rail. The crack extension behaviour is – as the origin of these cracks too – influenced by the cold working of the rail steel. The crack growth in the first stage is fracture mechanically analyzed by means of two-dimensional modelling. The simulation results are assessed for the use of rail grinding. A criterion for the change of the crack growth direction could not be derived, but the following stages of the crack growth in the transverse direction and the final fracture and the conditions for secondary fractures are considered. KW - Eisenbahnschiene KW - Schadensmechanik Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus-69 ER - TY - CHAP A1 - Edel, Karl-Otto A1 - Boudnitski, Grigori ED - Marquis, Gary B. T1 - Fracture mechanical analysis of railway wheels with rolling defects T2 - Fatigue design of components :this volume represents a selection of papers presented at the Second International Symposium on Fatigue Design, FD' 95, held in Helsinki, Finland on 5 - 8 September, 1995 N2 - Reusable solid wheels manufactured of the old steel BV1 (nearly equivalent to the solid or monobloc wheel steel R1 according to the new nomenclature) show in some cases rolling defects on the surface of the wheel disc. The fatigue behaviour of such defects is analysed by means of the linear-elastic fracture mechanics and Monte Carlo simulation and assessed to be able to derive the allowable defect size for the non-destructive testing. This paper was firstly presented at the Second International Symposium on Fatigue Design FD’95, held in Helsinki (Finland) on 5 – 8 September 1995. The complete research report is published under the title „Oberflächendefekte im Scheibenbereich” (Manufacturing surface defects in the disc area of solid wheels). The research work was sponsored by the Deutsche Forschungsgemeinschaft (DFG). T3 - ESIS publication - 22 KW - Eisenbahn ; Fahrwerk ; Beschädigung ; Bruchmechanik KW - Bruchmechanik KW - Eisenbahnräder Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus-204 SN - 0-08-043318-9 PB - Elsevier CY - Amsterdam ; New York ER - TY - JOUR A1 - Oertel, Christian A1 - Wei, Yintao T1 - Tyre rolling kinematics and prediction of tyre forces and moments: part I - theory and method JF - In: Vehicle system dynamics 50 (2012) 11, 1673-1687 N2 - A new method to describe tyre rolling kinematics and how to calculate tyre forces and moments is presented. The Lagrange–Euler method is used to calculate the velocity and contact deformation of a tyre structure under large deformation. The calculation of structure deformation is based on the Lagrange method, while the Euler method is used to analyse the deformation and forces in the contact area. The method to predict tyre forces and moments is built using kinematic theory and nonlinear finite element analysis. A detailed analysis of the tyre tangential contact velocity and the relationships between contact forces, contact areas, lateral forces, and yaw and camber angles has been performed for specific tyres. Research on the parametric sensitivity of tyre lateral forces and self-aligning torque on tread stiffness and friction coefficients is carried out in the second part of this paper. Y1 - 2012 U6 - https://doi.org/10.1080/00423114.2012.694452 SP - 1673 EP - 1687 ER - TY - JOUR A1 - Wei, Yintao A1 - Oertel, Christian A1 - Shena, Xiaoliang T1 - Tyre rolling kinematics and prediction of tyre forces and moments: part II - simulation and experiment JF - In: Vehicle system dynamics 50 (2012) 11, 1689-1706 N2 - There are two aims for the second part of this paper: verifying the theory presented in the first part through parameter variation and comparison between simulation and experiment, and to study the effect of the belt structure on the cornering properties of radial tyres. Research has been carried out with a passenger car radial tyre and two different kinds of truck or bus radial tyres using both simulation and experiment. This second part of the paper shows that belt structure plays an important role in the generation of tyre forces and moments in addition to the effects of the tread stiffness and friction coefficients. The theory and method presented in this paper opens a new robust way to predict the tyre forces and moments from the tyre design and provides a reliable model for a generation mechanism. Y1 - 2012 U6 - https://doi.org/10.1080/00423114.2012.694453 SP - 1689 EP - 1706 ER - TY - JOUR A1 - Rose, Sascha A1 - Zähr, Julia A1 - Schnick, Michael A1 - Füssel, Uwe A1 - Goecke, Sven-Frithjof A1 - Hübner, Mark T1 - Arc attachments on aluminium during tungsten electrode positive polarity in TIG welding of aluminium JF - In: Welding in the World 55 (2011) 9-10, pp 91-99 N2 - In modem AC power sources, both balance and current of EP (tungsten electrode positive) and EN (tungsten electrode negative) can be readily adjusted. According to conventional assumptions the surface of aluminium workpieces is cleaned during EP but the tungsten electrode is more heated due to electron work function. During EN the tungsten electrode cools down and the workpiece is melted. Therefore, optimal settings of the power source mostly aim for maximal penetration and minimal electrode wear. This paper presents a study of arc attachments in TIG welding on aluminium. Two different arc attachments to the cathodic workpiece could be attested with only one of them actually cleaning the surface. The first one is a spot mode (highly dynamic) that attaches to the edges of oxide layers and cracks them. The second one is also a spot mode, but it attaches to weld pools. It does not clean the surface but heats the base material intensively. Both arc attachment modes compete against each other. As a result, the cleaning area narrows with wider weld pools due to an increasing attachment to the weld pool during EP. The influences on the arc attachment to the aluminium cathode as well as the contradictions in present literature are discussed. Possible adjustments of the AC balance for optimized processes are proposed. Y1 - 2011 U6 - https://doi.org/10.1007/bf03321325 SN - 1878-6669 VL - 55 IS - 9-10 SP - 91 EP - 99 ER - TY - CHAP A1 - Löwe, Katharina A1 - Widiputri, D. I. A1 - Löher, H.-J. T1 - Optimised Control System Design through Operator Action Analysis T2 - Loss prevention and safety promotion in the process industries : proceedings of the 13th International Symposium, Brugge, Belgium, June 6 - 9, 2010 ; 676th Event of the EFCE Working Party on Loss Prevention / ed. by G. Suter ... Y1 - 2010 SN - 978-90-76019-29-1 PB - Technologisch Instituut vzw CY - Antwerpen ER - TY - CHAP A1 - Löwe, Katharina A1 - Widiputri, D. I. T1 - Considering Human Factors in Alarm Management Systems T2 - 8th European Congress of Chemical Engineering together with ProcessNet-Annual Meeting 25 - 29 September 2011, Berlin Y1 - 2011 ER - TY - CHAP A1 - Löwe, Katharina A1 - Dalijono, T. T1 - Human Factors Analysis in the Process Industries T2 - In: Proceedings of the 30th European Annual Conference on Human Decision Making and Manual Control September 11 and 12, 2012, DLR, Braunschweig Y1 - 2012 SP - 131 EP - 136 PB - Dt. Zentrum für Luft- und Raumfahrt, Inst. für Verkehrssystemtechnik CY - Braunschweig ER - TY - GEN A1 - Löwe, Katharina T1 - How to eliminate the sources of human errors to optimize human performance in a complex technical system KW - Human Error KW - Performance Influencing Factors KW - Safety Management Systems KW - Error Causes Y1 - 2014 ER - TY - GEN A1 - Löwe, Katharina T1 - German safety regulations and best practices to prevent accidents regarding the Gumi accident Y1 - 2013 ER - TY - GEN A1 - Löwe, Katharina A1 - Dalijono, Taufan T1 - Practical Tool for Human Factor Analysis Y1 - 2012 ER - TY - CHAP A1 - Kraska, Martin A1 - Jakobi, L. T1 - Computer aided course of mechanics of materials T2 - 7th International Materials Education Symposium (Cambridge, April 9-10 2015) Y1 - 2015 N1 - Poster ER - TY - JOUR A1 - Ebert-Spiegel, M. A1 - Goecke, Sven-Frithjof A1 - Rethmeier, M. T1 - Efficient gap filling in MAG welding using optical sensors JF - Welding in the World Y1 - 2014 U6 - https://doi.org/10.1007/s40194-014-0145-8 SN - 0043-2288 (print) SN - 1878-6669 (online) VL - 58 IS - 5 SP - 637 EP - 647 ER - TY - CHAP A1 - Goecke, Sven-Frithjof T1 - Visualisation and Control of the Heat Input in MAG Welding of Ultra-High-Strength Manganese-Boron Steels T2 - Visual-JW 2014, November 26−28th, Proceedings of the International Symposium on Visualization in Joining & Welding Science through Advanced Measurements and Simulation, 28−30 November, Joining and Welding Research Institute − JWRI, Osaka University 2014, Osaka, Japan, (2014); JWP-15 Y1 - 2014 SP - 35 EP - 36 ER - TY - CHAP A1 - Möller, F. A1 - Kügler, H. A1 - Kötschau, S. A1 - Geier, A. A1 - Goecke, Sven-Frithjof T1 - Gap Bridging Ability in Laser GMA Hybrid Welding of Thin 22MnB5 Sheets T2 - Physics Procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014 Y1 - 2014 U6 - https://doi.org/doi:10.1016/j.phpro.2014.08.052 SN - 1875-3892 ; 1875-3884 VL - 56 SP - 620 EP - 629 ER - TY - JOUR A1 - Müller, A. A1 - Goecke, Sven-Frithjof A1 - Rethmeier, M. T1 - Laser beam oscillation for fillet welding JF - Welding in the World Y1 - 2014 U6 - https://doi.org/10.1007/s40194-014-0165-4 SN - 1878-6669 (online) SN - 0043-2288 (print) VL - 58 IS - 6 SP - 865 EP - 872 ER - TY - JOUR A1 - Oertel, Christian A1 - Hempel, J. T1 - Tire Model Toolbox. University Focus JF - Tire technology international Y1 - 2014 SN - 1462-4729 SP - 62 EP - 65 ER - TY - GEN A1 - Löwe, Katharina A1 - Dalijono, T. T1 - Identify the Causes of Errors to Implement Accurate Improvements in High Automated Facilities of Process Industry − A Case Study Y1 - 2013 ER - TY - GEN A1 - Ebert-Spiegel, M. A1 - Goecke, Sven-Frithjof A1 - Rethmeier, M. T1 - Possibilities for compensating a higher heat input, in particular by the torch off set relative to the top sheet at the fillet weld on a lap joint Y1 - 2014 ER - TY - GEN A1 - Müller, A. A1 - Goecke, Sven-Frithjof A1 - Rethmeier, M. T1 - Laser beam oscillation welding for automotive applications Y1 - 2014 ER - TY - GEN A1 - Hempel, J. A1 - Oertel, Christian T1 - Parameter Optimization of Finite Element Tire Models Y1 - 2014 ER - TY - JOUR A1 - Yintao, Wei A1 - Oertel, Christian A1 - Li, Xuebing A1 - Yu, Liangyao T1 - A theoretical model for the tread slip and the effective rolling radius of the tyres in free rolling JF - Proceedings of the Institution of Mechanical Engineers : Part D, Journal of automobile engineering Y1 - 2017 U6 - https://doi.org/10.1177/0954407016675227 PB - Sage Publ. CY - London ER - TY - JOUR A1 - Yintao, Wei A1 - Oertel, Christian A1 - Liu, Yahui A1 - Li, Xuebing T1 - A theoretical model of speed-dependent steering torque for rolling tyres JF - Vehicle System Dynamics Y1 - 2015 U6 - https://doi.org/10.1080/00423114.2015.1111391 SN - 0042-3114 (Print) SN - 1744-5159 (Online) VL - 4 SP - 463 EP - 473 ER - TY - CHAP A1 - Sigwarth, Timo A1 - Löwe, Katharina A1 - Beck, Eberhard A1 - Pelchen, Lutz A1 - Schrader, Thomas T1 - Conceptual ontology of prospective risk analysis in medical environments - the OPT-Model-Ontology T2 - 2015 IEEE Seventh International Conference on Intelligent Computing and Information Systems (ICICIS'15) : Faculty of Commuter & Information Sciences, Ain Shams University, Cairo, Egypt, 12-14 Dec. 2015 Y1 - 2015 SN - 978-1-5090-1950-2 SN - 978-1-5090-1949-6 U6 - https://doi.org/10.1109/IntelCIS.2015.7397202 SP - 88 EP - 93 PB - IEEE CY - Piscataway, NJ ER - TY - CHAP A1 - Goecke, Sven-Frithjof A1 - Kügler, H. A1 - Baum, S. A1 - Vollertsen, F. T1 - Gap Bridging in Laser-GMA-Hybrid Welding of Boron Manganese UHSS T2 - Proceedings of the The International Symposium on Visualization in Joining & Welding Science through Advanced Measurements and Simulation, Visual-JW2016, October 17−18, 2016, Hotel Hankyu Expo Park, Osaka, Japan Y1 - 2016 ER - TY - JOUR A1 - Hempel, J. A1 - Oertel, Christian T1 - Parameter Optimization of Finite element tiremodels JF - Kautschuk, Gummi, Kunststoffe : KGK Y1 - 2016 VL - 69 IS - 4 SP - 24 EP - 29 ER - TY - CHAP A1 - Orlowski, Katja A1 - Loose, Harald ED - Honekamp, Wilfried T1 - Low-cost Locomotion Sensors T2 - 13. Nachwuchswissenschaftlerkonferenz mitteldeutscher Fachhochschulen, Hochschule Zittau/Görlitz, in Görlitz am 19. April 2012, Tagungsband Y1 - 2012 SN - 978-3-86870-436-5 SP - 25 EP - 30 PB - Re Di Roma-Verlag CY - Remscheid ER - TY - CHAP A1 - Orlowski, Katja A1 - Loose, Harald A1 - Otte, Karen A1 - Mansow-Model, Sebastian A1 - Thiers, Angelina ED - Huffel, Sabina van T1 - Kinect and Shimmer Sensors in Motion Analysis in Health Applications T2 - Biosignals 2012 : proceedings of the International Conference on Bio-inspired Systems and Signal Processing ; Vilamoura, Algarve, Portugal, 1 - 4 February 2012 ; [integrated in BIOSTEC (International Joint Conference on Biomedical Engineering Systems and Technologies)] / sponsored by INSTICC - Institute for Systems and Technologies of Information, Control and Communication. [Ed. by Sabine van Huffel ...] Y1 - 2012 SN - 978-989-8425-89-8 SP - 226 EP - 231 PB - SciTePress ER - TY - CHAP A1 - Goecke, Sven-Frithjof A1 - Ebert-Spiegel, Michael T1 - Towards a More Robust Automated MAG Welding T2 - 2015 IEEE International Conference on Automation Science and Engineering (CASE) : 24 - 28 Aug. 2015, Gothenburg, Sweden Y1 - 2015 U6 - https://doi.org/10.1109/coase.2015.7294114 SP - 417 EP - 418 PB - IEEE CY - Piscataway, NJ ER - TY - JOUR A1 - Das, Ashish A1 - Shome, Mahadev A1 - Goecke, Sven-Frithjof A1 - De, Amitava A1 - Das, C. R. T1 - Joining of galvannealed steel and aluminium alloy using controlled short circuiting gas metal arc welding process JF - Science and Technology of Welding & Joining Y1 - 2015 U6 - https://doi.org/10.1179/1362171815y.0000000032 VL - 20 IS - 5 SP - 402 EP - 408 ER - TY - JOUR A1 - Ebert-Spiegel, Michael A1 - Goecke, Sven-Frithjof A1 - Rethmeier, Michael T1 - Possibilities for compensating a higher heat input, in particular by the torch offset relative to the top sheet at the fillet weld on a lap joint JF - Welding in the World Y1 - 2015 U6 - https://doi.org/10.1007/s40194-015-0220-9 VL - 59 IS - 3 SP - 443 EP - 453 ER - TY - JOUR A1 - Goecke, Sven-Frithjof A1 - Syed, Arshad Alam A1 - Ebert-Spiegel, Michael A1 - De, Amitava T1 - Probing current, voltage and metal transfer characteristics in pulsed arc and in conventional and a novel low energy input short arc GMAW JF - Quarterly Journal of the Japan Welding Society Y1 - 2013 U6 - https://doi.org/10.2207/qjjws.31.26s VL - 31 IS - 4 SP - 26s EP - 30s ER - TY - JOUR A1 - Makwana, Pinaac A1 - Shome, Mahadev A1 - Goecke, Sven-Frithjof A1 - De, Amitava T1 - Fast responsive control of current and voltage waveforms for gas metal arc brazing of thin zinc-coated steel sheets JF - Journal of Materials Processing Technology Y1 - 2018 U6 - https://doi.org/10.1016/j.jmatprotec.2017.11.028 VL - 254 SP - 171 EP - 178 ER - TY - JOUR A1 - Makwana, Pinaac A1 - Shome, Mahadev A1 - Goecke, Sven-Frithjof A1 - De, Amitava T1 - Wetting length in gas metal arc brazing of galvanised steel JF - Science and Technology of Welding & Joining Y1 - 2017 U6 - https://doi.org/10.1080/13621718.2016.1207289 VL - 22 IS - 2 SP - 1 EP - 4 ER - TY - JOUR A1 - Makwana, Pinaac A1 - Shome, Mahadev A1 - Goecke, Sven-Frithjof A1 - De, Amitava T1 - Gas metal arc brazing of galvannealed steel sheets JF - Science and Technology of Welding & Joining Y1 - 2016 U6 - https://doi.org/10.1080/13621718.2016.1145420 VL - 21 IS - 7 SP - 1 EP - 7 ER - TY - JOUR A1 - Müller, Alexander A1 - Goecke, Sven-Frithjof A1 - Rethmeier, Michael T1 - Laser beam oscillation welding for automotive applications JF - Welding in the World Y1 - 2018 U6 - https://doi.org/10.1007/s40194-018-0625-3 VL - 62 IS - 5 SP - 1039 EP - 1047 ER - TY - JOUR A1 - Gao, X. S. A1 - Wu, Chuang-Song A1 - Goecke, Sven-Frithjof T1 - Numerical analysis of heat transfer and fluid flow characteristics and their influence on bead defects formation in oscillating laser-GMA hybrid welding of lap joints JF - The International Journal of Advanced Manufacturing Technology Y1 - 2018 U6 - https://doi.org/10.1007/s00170-018-2293-2 VL - 98 IS - 1-4 SP - 523 EP - 537 ER - TY - JOUR A1 - Chen, Shujun A1 - Zhang, Ruiying A1 - Jiang, Fan A1 - Goecke, Sven-Frithjof T1 - A novel method for testing the electrical property of arc column in plasma arc welding JF - Welding in the World Y1 - 2018 U6 - https://doi.org/10.1007/s40194-018-0561-2 VL - 62 IS - 3 SP - 637 EP - 645 ER - TY - JOUR A1 - Gao, X. S. A1 - Wu, Chuan-Song A1 - Goecke, Sven-Frithjof A1 - Kuegler, H. T1 - Effects of process parameters on weld bead defects in oscillating laser-GMA hybrid welding of lap joints JF - The International Journal of Advanced Manufacturing Technology Y1 - 2017 U6 - https://doi.org/10.1007/s00170-017-0637-y VL - 93 IS - 5-8 SP - 1877 EP - 1892 ER - TY - JOUR A1 - Das, Ashish A1 - Shome, Mahadev A1 - Goecke, Sven-Frithjof A1 - De, Amitava T1 - Joining of aluminium alloy and galvanized steel using a controlled gas metal arc process JF - Journal of Manufacturing Processes Y1 - 2017 U6 - https://doi.org/10.1016/j.jmapro.2017.04.006 VL - 27 SP - 179 EP - 187 ER - TY - JOUR A1 - Loose, Harald A1 - Orlowski, Katja T1 - Measurement of Human Locomotion: Evaluation of Low-Cost KINECT and SHIMMER Sensors JF - Solid State Phenomena KW - Locomotion KW - Microsoft Kinect Shimmer Sensor Systems KW - Motion Capture System Y1 - 2013 U6 - https://doi.org/10.4028/www.scientific.net/SSP.198.360 VL - 198 SP - 360 EP - 365 ER - TY - JOUR A1 - Loose, Harald A1 - Zasepa, Marcin A1 - Pierzchala, Przemyslaw A1 - Ritter, Robert T1 - GPS Based Navigation of an Autonomous Mobile Vehicle JF - Solid State Phenomena KW - Autonomous Navigation KW - Global Positioning System (GPS) KW - Mobile Robot KW - Robotics Y1 - 2009 U6 - https://doi.org/10.4028/www.scientific.net/SSP.147-149.55 VL - 147-149 SP - 55 EP - 60 ER - TY - JOUR A1 - Loose, Harald T1 - Mechatronics Engineering Programs at German Universities of Applied Sciences JF - Solid State Phenomena KW - Education KW - German Universities of Applied Sciences, KW - Mechatronics Y1 - 2010 U6 - https://doi.org/10.4028/www.scientific.net/SSP.165.419 VL - 165 SP - 419 EP - 424 ER - TY - JOUR A1 - Zehner, Christian A1 - Schweiger, Hans-Georg A1 - Obeidi, Ossama A1 - Komesker, Oliver A1 - Raschke, Andre A1 - Schiemann, Michael A1 - Gehnen, Markus A1 - Keller, Michael A1 - Birke, Peter T1 - Comparison of Several Methods for Determining the Internal Resistance of Lithium Ion Cells JF - Sensors KW - internal resistance KW - impedance KW - lithium-ion-cell KW - AC resistance KW - DC resistance Y1 - 2010 U6 - https://doi.org/10.3390/s100605604 VL - 10 IS - 6 SP - 5604 EP - 5625 ER - TY - JOUR A1 - Oertel, Christian A1 - Liu, Zhe A1 - Zhou, Fuqiang A1 - Wei, Yintao T1 - Three-dimensional vibration of a ring with a noncircular cross-section on an elastic foundation JF - Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science KW - Vibration of rings KW - modal analysis KW - three-dimensional ring model KW - elastic foundation KW - radial tires Y1 - 2018 U6 - https://doi.org/10.1177/0954406217720823 VL - 232 IS - 13 SP - 2381 EP - 2393 ER - TY - JOUR A1 - Widjaja, Agnes S. N. A1 - Löwe, Katharina A1 - Costa, Felipe Salerno T1 - Design and simulation of a concentrated solar thermal system with an integrated concrete storage for continuous heat supply JF - Energy Procedia KW - Concentrated solar thermal system KW - process heat supply KW - Concrete storage KW - Economic feasibility Study Y1 - 2018 U6 - https://doi.org/10.1016/j.egypro.2018.11.062 VL - 155 SP - 121 EP - 135 ER - TY - JOUR A1 - Kurachkina, Margarita A1 - Konshina, Elena A1 - Oseev, Aleksandr A1 - Hirsch, Sören T1 - Hybrid structures based on gold nanoparticles and semiconductor quantum dots for biosensor applications JF - Nanotechnology Science and Applications Y1 - 2018 U6 - https://doi.org/10.2147/nsa.s155045 VL - 11 SP - 15 EP - 21 ER - TY - JOUR A1 - Lübcke, Andrea A1 - Braenzel, Julia A1 - Dehlinger, Aurelie A1 - Schnürer, Matthias A1 - Stiel, Holger A1 - Guttmann, Peter A1 - Rehbein, Stefan A1 - Schneider, Gerd A1 - Werner, Stephan A1 - Kemmler, Roman A1 - Ritter, Sebastian A1 - Raugust, Marc A1 - Wende, Torsten A1 - Behrendt, Marcel A1 - Regehly, Martin T1 - Soft X-ray nanoscale imaging using a sub-pixel resolution charge coupled device (CCD) camera JF - Review of Scientific Instruments Y1 - 2019 U6 - https://doi.org/10.1063/1.5053593 VL - 90 IS - 4 PB - American Institute of Physics ER - TY - JOUR A1 - Goecke, Sven-Frithjof A1 - Makwana, Pinaac A1 - Shome, Mahadev A1 - De, Amitava T1 - Probing joint strength and distortion in gas metal arc lap joining of aluminum and steel sheets JF - Welding in the World Y1 - 2019 U6 - https://doi.org/10.1007/s40194-018-0653-z VL - 63 IS - 2 SP - 229 EP - 236 PB - Springer ER - TY - JOUR A1 - Makwana, Pinaac A1 - Goecke, Sven-Frithjof A1 - De, Amitava T1 - Real-time heat input monitoring towards robust GMA brazing JF - Science and Technology of Welding & Joining Y1 - 2019 U6 - https://doi.org/10.1080/13621718.2018.1470290 VL - 24 IS - 1 SP - 1 EP - 11 PB - Taylor & Francis ER -