TY - JOUR A1 - Oertel, Christian A1 - Wei, Yintao T1 - Tyre rolling kinematics and prediction of tyre forces and moments: part I - theory and method JF - In: Vehicle system dynamics 50 (2012) 11, 1673-1687 N2 - A new method to describe tyre rolling kinematics and how to calculate tyre forces and moments is presented. The Lagrange–Euler method is used to calculate the velocity and contact deformation of a tyre structure under large deformation. The calculation of structure deformation is based on the Lagrange method, while the Euler method is used to analyse the deformation and forces in the contact area. The method to predict tyre forces and moments is built using kinematic theory and nonlinear finite element analysis. A detailed analysis of the tyre tangential contact velocity and the relationships between contact forces, contact areas, lateral forces, and yaw and camber angles has been performed for specific tyres. Research on the parametric sensitivity of tyre lateral forces and self-aligning torque on tread stiffness and friction coefficients is carried out in the second part of this paper. Y1 - 2012 U6 - https://doi.org/10.1080/00423114.2012.694452 SP - 1673 EP - 1687 ER - TY - JOUR A1 - Wei, Yintao A1 - Oertel, Christian A1 - Shena, Xiaoliang T1 - Tyre rolling kinematics and prediction of tyre forces and moments: part II - simulation and experiment JF - In: Vehicle system dynamics 50 (2012) 11, 1689-1706 N2 - There are two aims for the second part of this paper: verifying the theory presented in the first part through parameter variation and comparison between simulation and experiment, and to study the effect of the belt structure on the cornering properties of radial tyres. Research has been carried out with a passenger car radial tyre and two different kinds of truck or bus radial tyres using both simulation and experiment. This second part of the paper shows that belt structure plays an important role in the generation of tyre forces and moments in addition to the effects of the tread stiffness and friction coefficients. The theory and method presented in this paper opens a new robust way to predict the tyre forces and moments from the tyre design and provides a reliable model for a generation mechanism. Y1 - 2012 U6 - https://doi.org/10.1080/00423114.2012.694453 SP - 1689 EP - 1706 ER - TY - JOUR A1 - Rose, Sascha A1 - Zähr, Julia A1 - Schnick, Michael A1 - Füssel, Uwe A1 - Goecke, Sven-Frithjof A1 - Hübner, Mark T1 - Arc attachments on aluminium during tungsten electrode positive polarity in TIG welding of aluminium JF - In: Welding in the World 55 (2011) 9-10, pp 91-99 N2 - In modem AC power sources, both balance and current of EP (tungsten electrode positive) and EN (tungsten electrode negative) can be readily adjusted. According to conventional assumptions the surface of aluminium workpieces is cleaned during EP but the tungsten electrode is more heated due to electron work function. During EN the tungsten electrode cools down and the workpiece is melted. Therefore, optimal settings of the power source mostly aim for maximal penetration and minimal electrode wear. This paper presents a study of arc attachments in TIG welding on aluminium. Two different arc attachments to the cathodic workpiece could be attested with only one of them actually cleaning the surface. The first one is a spot mode (highly dynamic) that attaches to the edges of oxide layers and cracks them. The second one is also a spot mode, but it attaches to weld pools. It does not clean the surface but heats the base material intensively. Both arc attachment modes compete against each other. As a result, the cleaning area narrows with wider weld pools due to an increasing attachment to the weld pool during EP. The influences on the arc attachment to the aluminium cathode as well as the contradictions in present literature are discussed. Possible adjustments of the AC balance for optimized processes are proposed. Y1 - 2011 U6 - https://doi.org/10.1007/bf03321325 SN - 1878-6669 VL - 55 IS - 9-10 SP - 91 EP - 99 ER - TY - JOUR A1 - Schenk, T. A1 - Kraska, Martin A1 - Richardson, I. M. T1 - Onderzoek nieuws uit Delft. De invloed van opspannen modelleren JF - Lastechniek Y1 - 2010 SN - 0023-8694 SP - 42 EP - 45 ER - TY - JOUR A1 - Ebert-Spiegel, M. A1 - Goecke, Sven-Frithjof A1 - Rethmeier, M. T1 - Efficient gap filling in MAG welding using optical sensors JF - Welding in the World Y1 - 2014 U6 - https://doi.org/10.1007/s40194-014-0145-8 SN - 0043-2288 (print) SN - 1878-6669 (online) VL - 58 IS - 5 SP - 637 EP - 647 ER - TY - JOUR A1 - Müller, A. A1 - Goecke, Sven-Frithjof A1 - Rethmeier, M. T1 - Laser beam oscillation for fillet welding JF - Welding in the World Y1 - 2014 U6 - https://doi.org/10.1007/s40194-014-0165-4 SN - 1878-6669 (online) SN - 0043-2288 (print) VL - 58 IS - 6 SP - 865 EP - 872 ER - TY - JOUR A1 - Oertel, Christian A1 - Hempel, J. T1 - Tire Model Toolbox. University Focus JF - Tire technology international Y1 - 2014 SN - 1462-4729 SP - 62 EP - 65 ER - TY - JOUR A1 - Yintao, Wei A1 - Oertel, Christian A1 - Li, Xuebing A1 - Yu, Liangyao T1 - A theoretical model for the tread slip and the effective rolling radius of the tyres in free rolling JF - Proceedings of the Institution of Mechanical Engineers : Part D, Journal of automobile engineering Y1 - 2017 U6 - https://doi.org/10.1177/0954407016675227 PB - Sage Publ. CY - London ER - TY - JOUR A1 - Yintao, Wei A1 - Oertel, Christian A1 - Liu, Yahui A1 - Li, Xuebing T1 - A theoretical model of speed-dependent steering torque for rolling tyres JF - Vehicle System Dynamics Y1 - 2015 U6 - https://doi.org/10.1080/00423114.2015.1111391 SN - 0042-3114 (Print) SN - 1744-5159 (Online) VL - 4 SP - 463 EP - 473 ER - TY - JOUR A1 - Hempel, J. A1 - Oertel, Christian T1 - Parameter Optimization of Finite element tiremodels JF - Kautschuk, Gummi, Kunststoffe : KGK Y1 - 2016 VL - 69 IS - 4 SP - 24 EP - 29 ER - TY - JOUR A1 - Rudenko, Maryia A1 - Gaponenko, Nikolai A1 - Litvinov, Vladimir A1 - Ermachikhin, Alexander A1 - Chubenko, Eugene A1 - Borisenko, Victor A1 - Mukhin, Nikolay A1 - Radyush, Yuriy A1 - Tumarkin, Andrey A1 - Gagarin, Alexander T1 - Structural Dependent Eu3+ Luminescence, Photoelectric and Hysteresis Effects in Porous Strontium Titanate JF - Materials KW - europium luminescence KW - poporous film KW - strontium titanate KW - resistive switching hysteresis KW - photocurrent Y1 - 2020 U6 - https://doi.org/10.3390/ma13245767 VL - 13 IS - 24 ER - TY - JOUR A1 - Das, Ashish A1 - Shome, Mahadev A1 - Goecke, Sven-Frithjof A1 - De, Amitava A1 - Das, C. R. T1 - Joining of galvannealed steel and aluminium alloy using controlled short circuiting gas metal arc welding process JF - Science and Technology of Welding & Joining Y1 - 2015 U6 - https://doi.org/10.1179/1362171815y.0000000032 VL - 20 IS - 5 SP - 402 EP - 408 ER - TY - JOUR A1 - Ebert-Spiegel, Michael A1 - Goecke, Sven-Frithjof A1 - Rethmeier, Michael T1 - Possibilities for compensating a higher heat input, in particular by the torch offset relative to the top sheet at the fillet weld on a lap joint JF - Welding in the World Y1 - 2015 U6 - https://doi.org/10.1007/s40194-015-0220-9 VL - 59 IS - 3 SP - 443 EP - 453 ER - TY - JOUR A1 - Goecke, Sven-Frithjof A1 - Syed, Arshad Alam A1 - Ebert-Spiegel, Michael A1 - De, Amitava T1 - Probing current, voltage and metal transfer characteristics in pulsed arc and in conventional and a novel low energy input short arc GMAW JF - Quarterly Journal of the Japan Welding Society Y1 - 2013 U6 - https://doi.org/10.2207/qjjws.31.26s VL - 31 IS - 4 SP - 26s EP - 30s ER - TY - JOUR A1 - Goecke, Sven-Frithjof A1 - Makwana, Pinaac A1 - Shome, Mahadev A1 - De, Amitava T1 - Probing joint strength and distortion in gas metal arc lap joining of aluminum and steel sheets JF - Welding in the World Y1 - 2019 U6 - https://doi.org/10.1007/s40194-018-0653-z VL - 63 IS - 2 SP - 229 EP - 236 ER - TY - JOUR A1 - Makwana, Pinaac A1 - Goecke, Sven-Frithjof A1 - De, Amitava T1 - Real-time heat input monitoring towards robust GMA brazing JF - Science and Technology of Welding & Joining Y1 - 2019 U6 - https://doi.org/10.1080/13621718.2018.1470290 VL - 24 IS - 1 SP - 1 EP - 11 ER - TY - JOUR A1 - Makwana, Pinaac A1 - Shome, Mahadev A1 - Goecke, Sven-Frithjof A1 - De, Amitava T1 - Fast responsive control of current and voltage waveforms for gas metal arc brazing of thin zinc-coated steel sheets JF - Journal of Materials Processing Technology Y1 - 2018 U6 - https://doi.org/10.1016/j.jmatprotec.2017.11.028 VL - 254 SP - 171 EP - 178 ER - TY - JOUR A1 - Makwana, Pinaac A1 - Shome, Mahadev A1 - Goecke, Sven-Frithjof A1 - De, Amitava T1 - Wetting length in gas metal arc brazing of galvanised steel JF - Science and Technology of Welding & Joining Y1 - 2017 U6 - https://doi.org/10.1080/13621718.2016.1207289 VL - 22 IS - 2 SP - 1 EP - 4 ER - TY - JOUR A1 - Makwana, Pinaac A1 - Shome, Mahadev A1 - Goecke, Sven-Frithjof A1 - De, Amitava T1 - Gas metal arc brazing of galvannealed steel sheets JF - Science and Technology of Welding & Joining Y1 - 2016 U6 - https://doi.org/10.1080/13621718.2016.1145420 VL - 21 IS - 7 SP - 1 EP - 7 ER - TY - JOUR A1 - Müller, Alexander A1 - Goecke, Sven-Frithjof A1 - Rethmeier, Michael T1 - Laser beam oscillation welding for automotive applications JF - Welding in the World Y1 - 2018 U6 - https://doi.org/10.1007/s40194-018-0625-3 VL - 62 IS - 5 SP - 1039 EP - 1047 ER - TY - JOUR A1 - Gao, X. S. A1 - Wu, Chuang-Song A1 - Goecke, Sven-Frithjof T1 - Numerical analysis of heat transfer and fluid flow characteristics and their influence on bead defects formation in oscillating laser-GMA hybrid welding of lap joints JF - The International Journal of Advanced Manufacturing Technology Y1 - 2018 U6 - https://doi.org/10.1007/s00170-018-2293-2 VL - 98 IS - 1-4 SP - 523 EP - 537 ER - TY - JOUR A1 - Chen, Shujun A1 - Zhang, Ruiying A1 - Jiang, Fan A1 - Goecke, Sven-Frithjof T1 - A novel method for testing the electrical property of arc column in plasma arc welding JF - Welding in the World Y1 - 2018 U6 - https://doi.org/10.1007/s40194-018-0561-2 VL - 62 IS - 3 SP - 637 EP - 645 ER - TY - JOUR A1 - Gao, X. S. A1 - Wu, Chuan-Song A1 - Goecke, Sven-Frithjof A1 - Kuegler, H. T1 - Effects of process parameters on weld bead defects in oscillating laser-GMA hybrid welding of lap joints JF - The International Journal of Advanced Manufacturing Technology Y1 - 2017 U6 - https://doi.org/10.1007/s00170-017-0637-y VL - 93 IS - 5-8 SP - 1877 EP - 1892 ER - TY - JOUR A1 - Das, Ashish A1 - Shome, Mahadev A1 - Goecke, Sven-Frithjof A1 - De, Amitava T1 - Joining of aluminium alloy and galvanized steel using a controlled gas metal arc process JF - Journal of Manufacturing Processes Y1 - 2017 U6 - https://doi.org/10.1016/j.jmapro.2017.04.006 VL - 27 SP - 179 EP - 187 ER - TY - JOUR A1 - Loose, Harald A1 - Orlowski, Katja T1 - Measurement of Human Locomotion: Evaluation of Low-Cost KINECT and SHIMMER Sensors JF - Solid State Phenomena KW - Locomotion KW - Microsoft Kinect Shimmer Sensor Systems KW - Motion Capture System Y1 - 2013 U6 - https://doi.org/10.4028/www.scientific.net/SSP.198.360 VL - 198 SP - 360 EP - 365 ER - TY - JOUR A1 - Loose, Harald A1 - Zasepa, Marcin A1 - Pierzchala, Przemyslaw A1 - Ritter, Robert T1 - GPS Based Navigation of an Autonomous Mobile Vehicle JF - Solid State Phenomena KW - Autonomous Navigation KW - Global Positioning System (GPS) KW - Mobile Robot KW - Robotics Y1 - 2009 U6 - https://doi.org/10.4028/www.scientific.net/SSP.147-149.55 VL - 147-149 SP - 55 EP - 60 ER - TY - JOUR A1 - Loose, Harald T1 - Mechatronics Engineering Programs at German Universities of Applied Sciences JF - Solid State Phenomena KW - Education KW - German Universities of Applied Sciences, KW - Mechatronics Y1 - 2010 U6 - https://doi.org/10.4028/www.scientific.net/SSP.165.419 VL - 165 SP - 419 EP - 424 ER - TY - JOUR A1 - Lübcke, Andrea A1 - Braenzel, Julia A1 - Dehlinger, Aurelie A1 - Schnürer, Matthias A1 - Stiel, Holger A1 - Guttmann, Peter A1 - Rehbein, Stefan A1 - Schneider, Gerd A1 - Werner, Stephan A1 - Kemmler, Roman A1 - Ritter, Sebastian A1 - Raugust, Marc A1 - Wende, Torsten A1 - Behrendt, Marcel A1 - Regehly, Martin T1 - Soft X-ray nanoscale imaging using a sub-pixel resolution charge coupled device (CCD) camera JF - Review of Scientific Instruments Y1 - 2019 U6 - https://doi.org/10.1063/1.5053593 VL - 90 IS - 4 ER - TY - JOUR A1 - Zehner, Christian A1 - Schweiger, Hans-Georg A1 - Obeidi, Ossama A1 - Komesker, Oliver A1 - Raschke, Andre A1 - Schiemann, Michael A1 - Gehnen, Markus A1 - Keller, Michael A1 - Birke, Peter T1 - Comparison of Several Methods for Determining the Internal Resistance of Lithium Ion Cells JF - Sensors KW - internal resistance KW - impedance KW - lithium-ion-cell KW - AC resistance KW - DC resistance Y1 - 2010 U6 - https://doi.org/10.3390/s100605604 VL - 10 IS - 6 SP - 5604 EP - 5625 ER - TY - JOUR A1 - Oertel, Christian A1 - Liu, Zhe A1 - Zhou, Fuqiang A1 - Wei, Yintao T1 - Three-dimensional vibration of a ring with a noncircular cross-section on an elastic foundation JF - Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science KW - Vibration of rings KW - modal analysis KW - three-dimensional ring model KW - elastic foundation KW - radial tires Y1 - 2018 U6 - https://doi.org/10.1177/0954406217720823 VL - 232 IS - 13 SP - 2381 EP - 2393 ER - TY - JOUR A1 - Widjaja, Agnes S. N. A1 - Löwe, Katharina A1 - Costa, Felipe Salerno T1 - Design and simulation of a concentrated solar thermal system with an integrated concrete storage for continuous heat supply JF - Energy Procedia KW - Concentrated solar thermal system KW - process heat supply KW - Concrete storage KW - Economic feasibility Study Y1 - 2018 U6 - https://doi.org/10.1016/j.egypro.2018.11.062 VL - 155 SP - 121 EP - 135 ER - TY - JOUR A1 - Schön, Stefan A1 - Band, Ricardo A1 - Pleban, Johann A1 - Creutzburg, Reiner A1 - Fischer, Arno T1 - Identifikation von Anwendungsfeldern der Technologie bei autonomen fliegenden Robotern in Projekten zwischen Hochschule und Wirtschaft JF - Tagungsband / 14. Nachwuchswissenschaftlerkonferenz Ost- und Mitteldeutscher Fachhochschulen (NWK 14) : Brandenburg an der Havel am 18. April 2013 KW - Drohne Y1 - 2013 SN - 978-3-86488-037-7 (Print) SP - 397 EP - 398 PB - Hülsbusch CY - Glückstadt ER - TY - JOUR A1 - Regehly, Martin A1 - Garmshausen, Yves A1 - Reuter, Marcus A1 - König, Niklas F. A1 - Israel, Eric A1 - Kelly, Damian P. A1 - Chou, Chun-Yu A1 - Koch, Klaas A1 - Asfari, Baraa A1 - Hecht, Stefan T1 - Xolography for linear volumetric 3D printing JF - Nature KW - Design, synthesis and processing KW - Materials chemistry KW - Photochemistry Y1 - 2020 U6 - https://doi.org/10.1038/s41586-020-3029-7 VL - 588 SP - 620 EP - 624 ER - TY - JOUR A1 - Kurachkina, Margarita A1 - Konshina, Elena A1 - Oseev, Aleksandr A1 - Hirsch, Sören T1 - Hybrid structures based on gold nanoparticles and semiconductor quantum dots for biosensor applications JF - Nanotechnology Science and Applications Y1 - 2018 U6 - https://doi.org/10.2147/nsa.s155045 VL - 11 SP - 15 EP - 21 ER - TY - JOUR A1 - Tumarkin, Andrey A1 - Tyurnina, Natalya A1 - Tyurnina, Zoya A1 - Mukhin, Nikolay A1 - Sinelshchikova, Olga A1 - Gagarin, Alexander A1 - Sviridov, Sergey A1 - Drozdovsky, Andrey A1 - Sapego, Eugeny A1 - Mylnikov, Ivan T1 - Barium-Strontium Titanate/Porous Glass Structures for Microwave Applications JF - Materials KW - glass-ceramic structures KW - filling of porous material KW - microwave KW - barium-strontium titanate Y1 - 2020 U6 - https://doi.org/10.3390/ma13245639 VL - 13 IS - 24 ER -