TY - CHAP ED - Edel, Karl-Otto T1 - Internationales Symposium "Schienenfehler" : Tagungsbericht, Brandenburg an der Havel, 16. und 17. November 2000 N2 - Schienenfehler in Form von Beschädigungen, Rissen und Brüchen entstehen einerseits durch die Herstellung, andererseits aber vor allem durch die betriebliche Nutzung der Gleise. Ange-sichts neuerer Entwicklungen wurde am 16. und 17. November 2000 an der Fachhochschule in Brandenburg an der Havel ein Internationales Symposium „Schienenfehler“ durchgeführt, um den gegenwärtigen Stand bei der Erfassung und der Behandlung der Schienenfehler sowie bei der wissenschaftlichen Analyse ihres Verhaltens und ihrer Entwicklung zu dokumentieren und einen engen Dialog zwischen Forschung und Praxis anzuregen, um letztlich die Sicher-heit und die Wirtschaftlichkeit des Eisenbahnbetriebes weiter zu verbessern. Die 20 Vorträge befaßten sich mit den Problemkreisen Betriebserfahrungen, Beanspruchung und bruchmecha-nische Analyse, Rollkontaktermüdung und den Lebenszykluskosten. Die Referenten kamen aus Deutschland, Großbritannien, Österreich, Rußland, der Schweiz und Ungarn. KW - Gleisbau ; Werkstoffkunde ; Beschädigung ; Rissausbreitung ; Bruchmechanik KW - Schienenfehler Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus-183 ER - TY - CHAP A1 - Edel, Karl-Otto A1 - Boudnitski, Grigori ED - Marquis, Gary B. T1 - Fracture mechanical analysis of railway wheels with rolling defects T2 - Fatigue design of components :this volume represents a selection of papers presented at the Second International Symposium on Fatigue Design, FD' 95, held in Helsinki, Finland on 5 - 8 September, 1995 N2 - Reusable solid wheels manufactured of the old steel BV1 (nearly equivalent to the solid or monobloc wheel steel R1 according to the new nomenclature) show in some cases rolling defects on the surface of the wheel disc. The fatigue behaviour of such defects is analysed by means of the linear-elastic fracture mechanics and Monte Carlo simulation and assessed to be able to derive the allowable defect size for the non-destructive testing. This paper was firstly presented at the Second International Symposium on Fatigue Design FD’95, held in Helsinki (Finland) on 5 – 8 September 1995. The complete research report is published under the title „Oberflächendefekte im Scheibenbereich” (Manufacturing surface defects in the disc area of solid wheels). The research work was sponsored by the Deutsche Forschungsgemeinschaft (DFG). T3 - ESIS publication - 22 KW - Eisenbahn ; Fahrwerk ; Beschädigung ; Bruchmechanik KW - Bruchmechanik KW - Eisenbahnräder Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus-204 SN - 0-08-043318-9 PB - Elsevier CY - Amsterdam ; New York ER - TY - CHAP A1 - Boersch, Ingo A1 - Heinsohn, Jochen A1 - Loose, Harald A1 - Mrkor, Kai T1 - RCUBE: a multipurpose platform for intelligent autonomous system T2 - In: Proceedings of the IEEE International Conference on Mechatronics : June 3 - 5, 2004, Istanbul, Turkey. - Piscataway, NJ :IEEE Operations Center, 2004. - S. 182 - 187. - ISBN 0-7803-8599-3 N2 - Since 1995 autonomous, intelligent or mobile robot systems have been investigated and included in the education process. Using commercial and/or open source platforms like LEGO-techniques with the 6.270-Board (Flynn, A.M. and Jones, J.L., 1996), the EyeBot controller (Braunl, Th., 2002) or the PIONEER robots various aspects like mobility, controllability, sensor fusion, line or object recognition, navigation and control strategies were taken into account. The limited abilities of all these systems in computing power or image processing required the development of a new hardware platform called RCUBE (Boersch, I., et al., 2003) combining the features of a typical actuator-sensor-input-output-board with computing power and image recognition capabilities. The system would be suitable as a compact platform for universities, small enterprises and private developers. Y1 - 2004 ER - TY - CHAP A1 - Loose, Harald A1 - Boersch, Ingo A1 - Heinsohn, Jochen A1 - Mrkor, Kai T1 - RCUBE - a multipurpose platform for mobile robots T2 - Mechatronic Systems 2004: A Proceedings Volume from the 3rd IFAC Sydney, Australia, 6 - 8 September 2004. - Kidlington, Oxford : Elsevier Ltd., 2005. - ISBN 0-08-044263-3 Y1 - 2005 ER - TY - CHAP A1 - Loose, Harald A1 - Boersch, Ingo A1 - Heinsohn, Jochen A1 - Mrkor, Kai-Uwe T1 - RCUBE - a multipurpose platform for mobile systems in education T2 - In: REM 2004, 5th International Workshop on Research and Education in Mechatronics, 1st - 2nd October 2004 Kielce - Cedzyna, Poland. - Kielce : Wydawn. Politechn. Świe̜tokrzy, 2004 N2 - Since 1995 mobile robot systems have been investigated and included in the education process. Using commercial and/or open source platforms like LEGO-techniques with the 6.270-Board [5], the EyeBot controller [3] or the PIONEER robots [10] various aspects of mobility, sensing, control and navigation were taken into account. The limited abilities of all these platforms in computing power or image processing required the development of a new hardware platform called RCUBE [2], [11] combining the features of a typical actuator-sensor-input-outputboard with computing power and image recognition capabilities. The system is suitable as a compact platform for universities, small enterprises and private developers. Y1 - 2004 ER - TY - CHAP A1 - Boersch, Ingo A1 - Heinsohn, Jochen A1 - Loose, Harald A1 - Mrkor, Kai-Uwe T1 - RCUBE - a platform for intelligent autonomous systems T2 - In: Proceedings / 2003 IEEE International Conference on Industrial Technology : December 10 - 12, 2003, Hotel Habakuk, Maribor, Slovenia. - Piscataway, NJ : IEEE Operations Center, 2003. - S. 203 - 206. - ISBN 0-7803-7852-0 N2 - An intelligent robot platform for autonomous systems with vision capabilities has been developed by the University of Applied Sciences Brandenburg in cooperation with SME's. The system is suitable as a research and education platform for universities, a basis for industrial applications and for private developers of robots. This paper presents an architecture overview and application details of the RCUBE system. RCUBE is available in 2 modular versions: (1) a cost-effective platform for reactive robots and private developers (2) a performant platform for intelligent robots with image processing capabilities suitable for research, development and education in the field of service robotics. The system consists of 3 ready-to-program hardware modules with a basic software layer. They can be combined in different configurations. The modularity provides the flexibility to configure an RCUBE system for different application areas, but also single modules can be used in applications such as autonomous intelligent cameras or planning robots (e.g. lawnmower, vacuum cleaner). A key feature is the capability to autonomous image processing combined with sensors and actors, small size and low power consumption. RCUBE opens the way to small independent seeing robots. Y1 - 2003 ER - TY - CHAP A1 - Loose, Harald A1 - Boersch, Ingo A1 - Heinsohn, Jochen ED - Kasper, Roland T1 - RobotBuildingLab - ein integrativer Lehransatz in der Mechatronik-Ausbildung T2 - In: Entwicklungsmethoden und Entwicklungsprozesse im Maschinenbau : Tagungsband / 4. Magdeburger Maschinenbau-Tage, 22. bis 23. September 1999. Otto-von-Guericke-Universität Magdeburg. [Hrsg.: Roland Kasper ...]. - Berlin : Logos-Verl., 1999. - S. 219 - 228. - ISBN 3-89722-300-7 Y1 - 1999 ER - TY - CHAP A1 - Boersch, Ingo A1 - Heinsohn, Jochen A1 - Loose, Harald T1 - Autonome mobile Systeme in der Lehre T2 - Dritter Brandenburger Workshop Mechatronik ; 01. - 02. Oktober 1998 / Fachhochschule Brandenburg. [Red.: Harald Loose]. - Brandenburg an der Havel : Fachhochsch., 1999. - (Hochschulforum / FH Brandenburg : Brandenburger Tagungsberichte). - S. 84 - 93 Y1 - 1999 ER - TY - CHAP A1 - Boersch, Ingo A1 - Heinsohn, Jochen A1 - Loose, Harald T1 - RobotBuildingLab – praktische Mechatronik in der Ausbildung T2 - In: Proceedings / 2. Polnisch-Deutscher Workshop Werkzeuge der Mechatronik : 14. - 15.5.1998, Ilmenau, Deutschland / Technische Universität Warschau ... [Red.: Klaus König ...]. - Ilmenau, 1998. - S. 23 - 33. - ISBN 3-00-002556-1 Y1 - 1998 ER - TY - CHAP A1 - Heinsohn, Jochen ED - Hollunder, Bernhard T1 - DFKI Workshop on Taxonomic Reasoning : Proceedings. Saarbrücken, February 26, 1992 Y1 - 1992 N1 - Reportnummer: DFKI D 92 08 CY - Kaiserslautern ER - TY - CHAP A1 - Fischer, Robert A1 - Gruhn, Stefan A1 - Kiertscher, Tobias A1 - Scheidat, Tobias A1 - Vielhauer, Claus T1 - A Feature Collection and first Feature Fusion Approaches for latent Fingerprint Detection using a ChromaticWhite Light (CWL) Sensor Device T2 - 13th Joint IFIP TC6 and TC11 Conference on Communications and Multimedia Security. Canterbury, UK: 03.09.2012 Y1 - 2012 SP - 207 EP - 210 PB - Springer LNCS ER - TY - CHAP A1 - Fischer, Robert A1 - Gruhn, Stefan A1 - Kiertscher, Tobias A1 - Vielhauer, Claus A1 - Makrushin, Andrey A1 - Dittmann, Jana T1 - Computer-Aided Contact-Less Localization of Latent Fingerprints in Low-Resolution CWL Scans T2 - In: Communications and Multimedia Security: 13th IFIP TC 6/TC 11 International Conference, CMS 2012, Canterbury, UK, September 3-5, 2012. Proceedings. De Decker, Bart (Ed.); Chadwick, David W. (Ed) [Lecture Notes in Compute Science. 7394. – ISSN 0302-9743]. Berlin: Springer, 2012. – ISBN 978-3-642-32804-6. N2 - In forensic investigations, the recovering of latent fingerprints is one of the most essential issues. Driven by human experts, today this process is very time consuming. An automation of both examination of suspicious areas and acquisition of fingerprints lead on the one hand to the covering of larger surfaces and on the other hand to significant speed up of the evidence collection. This work presents an experimental study on capabilities of chromatic white-light sensor (CWL) regarding the contact-less localization of latent fingerprints on differently challenging substrates. The fully automatic CWL-based system is implemented from the acquisition through the feature extraction right up to the classification. The key objective of the work is to develop a methodological approach for the quantitative evaluation of the localization success. Based on the proposed performance measures, the optimal system parameters such as scan resolution, extracted features and classification scheme are specified dependent on the surface material. Our experiments from an actual project with the sensor industry partner show convincing localization performance on easy-to-localize and adequate performance on moderate-to-localize substrates. The hard-to-localize substrates require further improvements of the localization system. KW - Forensics KW - latent fingerprints KW - automated localization KW - contact-less acquisition KW - CWL sensor Y1 - 2012 U6 - https://doi.org/10.1007/978-3-642-32805-3_7 SP - 89 EP - 98 ER - TY - CHAP A1 - Makrushin, Andrey A1 - Hildebrandt, Mario A1 - Fischer, Robert A1 - Kiertscher, Tobias A1 - Dittmann, Jana A1 - Vielhauer, Claus T1 - Advanced techniques for latent fingerprint detection and validation using a CWL device T2 - In: Proceedings of SPIE 8436, 84360V. 2012. N2 - The technology-aided support of forensic experts while investigating crime scenes and collecting traces becomes a more and more important part in the domains of image acquisition and signal processing. The manual lifting of latent fingerprints using conventional methods like the use of carbon black powder is time-consuming and very limited in its scope of application. New technologies for a contact-less and non-invasive acquisition and automatic processing of latent fingerprints, promise the possibilities to inspect much more and larger surface areas and can significantly simplify and speed up the workflow. Furthermore, it allows multiple investigations of the same trace, subsequent chemical analysis of the residue left behind and the acquisition of latent fingerprints on sensitive surfaces without destroying the surface itself. In this work, a FRT MicroProf200 surface measurement device equipped with a chromatic white-light sensor CWL600 is used. The device provides a gray-scale intensity image and 3D-topography data simultaneously. While large area scans are time-consuming, the detection and localization of finger traces are done based on low-resolution scans. The localized areas are scanned again with higher resolution. Due to the broad variety of different surface characteristics the fingerprint pattern is often overlaid by the surface structure or texture. Thus, image processing and classification techniques are proposed for validation and visualization of ridge lines in high-resolution scans. Positively validated regions containing complete or sufficient partial fingerprints are passed on to forensic experts. The experiments are provided on a set of three surfaces with different reflection and texture characteristics, and fingerprints from ten different persons. © (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Y1 - 2012 U6 - https://doi.org/10.1117/12.922235 ER - TY - CHAP A1 - Fischer, Robert A1 - Kiertscher, Tobias A1 - Gruhn, Stefan A1 - Scheidat, Tobias A1 - Vielhauer, Claus ED - De Decker, Bart T1 - From Biometrics to Forensics: A Feature Collection and first Feature Fusion Approaches for latent Fingerprint Detection using a Chromatic White Light (CWL) Sensor T2 - In: Communications and multimedia security : 13th IFIP TC 6 TC 11 international conference ; proceedings / CMS 2012, Canterbury, UK, September 3 - 5, 2012 N2 - Application of non-invasive scan technologies for acquisition of latent fingerprints promise a better support of forensic and dactyloscopic experts when securing evidence at crime scenes. Furthermore, non-destructive acquisition preserve the chance of subsequent chemical and forensic analysis of left residue. Based on results of an ongoing research project with sensor industry partners, this paper presents a collection of 28 statistical, gradient-, and spectral density-based features for latent fingerprint detection using low resolution scans. Within this work a chromatic white light (CWL) sensor is used for image acquisition. Furthermore, based on concepts of biometric fusion, a taxonomy for possible fusion strategies is presented and very first results for three different strategies on decision level are discussed. Experimental evaluation is performed based on scans of 1680 latent fingerprints on three different surfaces. The results show very good performance on planar, non-absorbing surfaces with uniform reflection characteristics with an detection rate of 2.51% in the best case. On the other hand difficulties are arising from surfaces with non-uniform/predictable reflection characteristics. T3 - Lecture notes in computer science - 7394 Y1 - 2012 SN - 978-3-642-32804-6 U6 - https://doi.org/10.1007/978-3-642-32805-3_21 SP - 207 EP - 210 PB - Springer CY - Berlin ER - TY - CHAP A1 - Kiertscher, Tobias A1 - Vielhauer, Claus A1 - Leich, Marcus T1 - Automated Forensic Fingerprint Analysis: A Novel Generic Process Model and Container Format T2 - In: Biometrics and ID management : proceedings / COST 2101 European Workshop BioID 2011, Brandenburg (Havel), Germany, March 8 - 10, 2011. Claus Vielhauer ... (ed.). - Berlin : Springer, 2011. - (Lecture Notes in Computer Science ; 6583). – ISBN 978-3-642-19529-7. - S. 262 - 273 N2 - The automated forensic analysis of latent fingerprints poses a new challenge. While for the pattern recognition aspects involved, the required processing steps can be related to fingerprint biometrics, the common biometric model needs to be extended to face the variety of characteristics of different surfaces and image qualities and to keep the chain of custody. Therefore, we introduce a framework for automated forensic analysis of latent fingerprints. The framework consists of a generic process model for multi-branched process graphs w.r.t. security aspects like integrity, authenticity and confidentiality. It specifies a meta-model to store all necessary data and operations in the process, while keeping the chain of custody. In addition, a concept for a technical implementation of the meta-model is given, to build a container format, which suits the needs of an automated forensic analysis in research and application. KW - automated forenic analysis KW - automated dactyloscopy KW - multi-branched biometric process KW - forensic container format Y1 - 2011 U6 - https://doi.org/10.1007/978-3-642-19530-3_24 ER - TY - CHAP A1 - Kiertscher, Tobias A1 - Fischer, Robert A1 - Vielhauer, Claus T1 - Latent Fingerprint Detection using a spectral Texture Feature T2 - In: Proceedings of the 2011 ACM SIGMM Multimedia and Security Workshop : September 29 - 30, 2011, Buffalo, New York, USA / sponsored by ACM SIGMM. - New York : ACM, 2011. - S. 27-32. - ISBN 978-1-4503-0806-9 N2 - Technologies for advancing and supporting criminalistic forensic are an upcoming challenge with rising importance within the domain of multimedia security and forensic. For example the acquisition and automated analysis of latent fingerprints, using high resolution 3D scanners, appears to be a promising area of research. Within the paper we will give a detailed demarcation of biometric and forensic fingerprint analysis. We will introduce the aim of a partly automated process for forensic fingerprint acquisition, detection, and processing. Based on the idea of splitting the overall scan process into a fast, low resolution coarse scan and a high resolution detailed scan, different approaches and algorithms has to be evaluated, whether they are feasible for detecting latent fingerprints. Referring to the subject of biometrics and emerging applications, this work will show an approach of a novel Fourier-based spectral texture feature for detecting latent fingerprints in low resolution grey-scale images. Our work is based on data that is acquired using a chromatic white light sensor (CWL), which provides intensity and topographic information of the scanned surface areas. While using a very limited set of different surfaces so far, our first experiments have shown good results on flat and non structured surfaces. Using the presented feature, it is possible to detect latent fingerprints on these surfaces. Even on slightly structured surfaces, like wood imitation, the application of the spectral density feature yields promising results. However the first evaluation of the spectral density feature has also shown some serious limitations of its use on low resolution images. Y1 - 2011 U6 - https://doi.org/10.1145/2037252.2037259 ER - TY - CHAP A1 - Faustmann, Gert A1 - Wikarski, Dietmar T1 - Exception Handling in Petri-Net-based Workflow Management T2 - In: Practical aspects of knowledge management : proceedings of the first international conference, Basel, Switzerland, October 30 - 31, 1996 / PAKM '96, [The First International Conference on Practical Aspects of Knowledge Management. Schweizer Informatiker-Gesellschaft; Swiss Group for Artificial Intelligence and Cognitive Science. Ed. by: Michael Wolf ...]. - Zürich, 1996. - Vol. 1. Y1 - 1996 ER - TY - CHAP A1 - Han, Yanbo A1 - Himmighöfer, Jürgen A1 - Schaaf, Thorsten A1 - Wikarski, Dietmar T1 - Management of Workflow Resources to Support Runtime Adaptability and System Evolution T2 - In: Practical aspects of knowledge management : proceedings of the first international conference, Basel, Switzerland, October 30 - 31, 1996 / PAKM '96, [The First International Conference on Practical Aspects of Knowledge Management. Schweizer Informatiker-Gesellschaft; Swiss Group for Artificial Intelligence and Cognitive Science. Ed. by: Michael Wolf ...]. - Zürich, 1996. - Vol. 1. Y1 - 1996 ER - TY - CHAP A1 - Adametz, H. A1 - Barthel, B. A1 - Faustmann, G. A1 - Fleischer, J. A1 - Messer, B. A1 - Wikarski, Dietmar T1 - Konzepte flexibler Workflow-Management-Systeme T2 - In: Telekooperations-Systeme in dezentralen Organisationen : Tagungsband zum Workshop der GI-Fachgruppe 5.5.1 "CSCW in Organisationen" vom 22.-23. Februar 1996 / Kurt Sandkuhl ... (Hrsg.) . - Berlin [u.a.] : ISST, 1996. - ( ISST-Berichte ; 31/96 ). - S. 7 - 32 Y1 - 1996 ER - TY - CHAP A1 - Wikarski, Dietmar T1 - Modular Nets and Object Nets: A Unifying View T2 - In: Workshop Concurrency, Specification & Programming : October 12 - 15, 1994 / L. Czaja ... Hrsg.: Professoren des Institutes für Informatik. [Humboldt-Universität Berlin] . - Berlin : Professoren des Inst. für Informatik. - 1994. - (Informatik-Berichte ; 36) Y1 - 1994 ER - TY - CHAP A1 - Maruwasa, L. T. A1 - Wikarski, Dietmar T1 - Integrated local g2c-e-government and e-business for rural areas: Can a German public-private partnership model be exported to Namibia? T2 - In K. Boamah and J. P. Grundling (Eds.). Proceedings of the 5th International conference on entrepreneurship and innovation, October 24-25, 2007, Windhoek Namibia. - Windhoek : Polytechnic of Namibia & Tshwane University of Technology, South Africa. - 2007 N2 - Private Public Partnerships (PPP) have been proven as one solution to ensure that the public receive enhanced services delivery from government and other civic organizations. In countries such as Namibia where the effects of the digital divide are so pertinent, PPP can and should be used to narrow this divide and so bringing to the people the promises of e-government and its many benefits as outlined in Vision 2030 and National Development Plan 3 (NDP3). Furthermore, these Private Public Partnerships can help to contribute to economic growth in particular in the Small Medium Enterprises (SME) sector. This paper attempts to show that these effects can be well achieved in the Namibian context by using the experience of a research/prototype project conducted in Germany to establish a so-called Public Service Network. Y1 - 2007 ER - TY - CHAP A1 - Mündemann, Friedhelm T1 - Zertifizierte TeleCoach-Ausbildung T2 - In: Berufliche Bildung in Deutschland für das 21. Jahrhundert : Dokumentation des 4. Forums Berufsbildungsforschung 1999 an der Universität Paderborn / Franz-Josef Kaiser (Hrsg.). Bundesanstalt für Arbeit. - Nürnberg : Zentralamt der Bundesanst. für Arbeit, Geschäftsstelle für Veröff., 1999. - (Beiträge zur Arbeitsmarkt- und Berufsforschung ; 238) (Beiträge zur Berufsbildungsforschung der AG BFN ; Nr. 4) ISBN 978-3-7639-3926-8 Y1 - 1999 SP - 527 EP - 538 ER - TY - CHAP A1 - Mündemann, Friedhelm T1 - eModeration : der Trainer als Lernermöglicher T2 - In: Online-Tutorien : Beiträge zum Spezialkongress "Distance Learning" der AG-F im Rahmen der LEARNTEC 2002 / Ulrich Bernath (Hrsg.). - Oldenburg : BIS Bilbiotheks- und Informationssystem der Universität Oldenburg, 2002 ISBN 3-8142-0806-4 Y1 - 2002 SP - 7 EP - 19 ER - TY - CHAP A1 - Mündemann, Friedhelm T1 - Architekturaspekte autonomer wissensverarbeitender Systeme T2 - In: ICAS-Forum Innovation / Universität der Bundeswehr München und ICAS, Institut für Cybernetische Anthropologie Starnberg e.V. Jörg D. Becker ... (Hrsg.). - München, 1996 ISBN 3-9805065-0-9 Y1 - 1996 SP - 135 EP - 150 ER - TY - CHAP A1 - Mündemann, Friedhelm T1 - Learning in Presence Courses and Tele-Learning: What can Tele-learning achieve at the present State of Technology? T2 - In: Book of abstracts : International Conference on Technology Supported Learning, December 2 - 4, 1998, Hotel InterContinental, Berlin. - Bonn : Internat. Where and How, 1998 ISBN 3-925144-09-9 Y1 - 1998 SP - 205 EP - 208 ER - TY - CHAP A1 - Mündemann, Friedhelm T1 - Multimedia = Multilearning? Chances and Impacts of New Media in Telematics-Based learning T2 - In: Book of abstracts / Online Educa Berlin : 6th International Conference on Technology Supported Learning & Training ; November 30 - December 01, 2000. - Bonn : IWH-Verl., 2000 ISBN 3-925144-09-9 Y1 - 2000 SP - 61 EP - 65 ER - TY - CHAP A1 - Mündemann, Friedhelm T1 - eLearning meets pharmaceutical field staff T2 - In: LinkLearnTec 2005 : 13. Europäischer Kongreß und Fachmesse für Bildungs- und Informationstechnologie. - Karlsruhe : Karlsruher Messe- und Kongress-GmbH, 2005. - CD-ROM Y1 - 2005 ER - TY - CHAP A1 - Mündemann, Friedhelm T1 - Qualified training for TeleCoaches T2 - In: Online Educa Berlin ; 5th International Conference on Technology Supported Learning ; November 13-15, 1996, Berlin ; book of abstracts. - Berlin : Internat. Where + How, 1999. - ISBN 3-925144-09-9 Y1 - 1999 SP - 120 EP - 123 ER - TY - CHAP T1 - Verwaltung und Region im Electronic Government BT - Tagungsdokumentation, Brandenburg 25. Januar 2002 T2 - Stiftungsreihe / Alcatel-SEL-Stiftung für Technische und Wirtschaftliche Kommunikationsforschung ; 44 KW - Bürgernahe Verwaltung ; Computerunterstützter Unterricht ; Internet ; Verwaltungsautomation ; Wissensmanagement ; Fernunterricht ; Kongress ; Brandenburg an der Havel Y1 - 2002 EP - 39 S. PB - Alcatel SEL Stiftung CY - Stuttgart ER - TY - CHAP A1 - Wikarski, Dietmar T1 - Kooperatives Informations- und Wissensmanagement – aus der Hochschule in der Region T2 - In: Verwaltung und Region im Electronic Government : Tagungsdokumentation, Brandenburg 25. Januar 2002. - Stuttgart : Alcatel SEL Stiftung, 2002. - (Stiftungsreihe / Alcatel-SEL-Stiftung für Technische und Wirtschaftliche Kommunikationsforschung ; 44) Y1 - 2002 SP - 20 EP - 25 CY - Stuttgart ER - TY - CHAP T1 - Prozessmodellierung in der Medizin : [Dokumentation der Tagung "MedPro2011 - Tagung zur medizinischen Prozessmodellierung", Fachhochschule Brandenburg, 14. April 2011] T3 - Stiftungsreihe / Alcatel-Lucent-Stiftung für Kommunikationsforschung - 98 KW - Medizin KW - Prozessanalyse KW - Kongress KW - Brandenburg <2011> Y1 - 2012 PB - Alcatel-Lucent-Stiftung CY - Stuttgart ER - TY - CHAP A1 - Wikarski, Dietmar T1 - Prozessmodellierung zur Qualitätssicherung in den Bereichen Medizin, Rehabilitation und Ausbildung – Konzepte, Erfahrungen und Maxime T2 - Prozessmodellierung in der Medizin : [Dokumentation der Tagung "MedPro2011 - Tagung zur medizinischen Prozessmodellierung", Fachhochschule Brandenburg, 14. April 2011] / Eberhard Beck, Tina Meissner, Thomas Schrader, Dietmar Wikarski ... - Stuttgart : Alcatel SEL Stiftung, 2012. - 66 S. - (Stiftungsreihe / Alcatel-SEL-Stiftung für Kommunikationsforschung im Stifterverband für die Deutsche Wissenschaft ; 98) Y1 - 2012 SP - 49 EP - 54 ER - TY - CHAP A1 - Heiner, M. A1 - Ventre, G. A1 - Wikarski, Dietmar T1 - A Petri Net based Tool Kit to integrate qualitative and quantitative analysis T2 - In: Transputer applications and systems '93 : proceedings of the 1993 World Transputer Congress, 20 - 22 September 1993, Aachen, Germany / ed. by R. Grebe ... [TTC, the Transputer Consortium] . - ( Transputer and occam engineering series ; 36 ). - ISBN 90-5199-140-1 Y1 - 1993 SP - 1317 ER - TY - CHAP A1 - Mündemann, Friedhelm T1 - TeleCoaches: Aufgaben, Ausbildung T2 - In: Campus 2000 : Lernen in neuen Organisationsformen / [Ges. für Medien in der Wissenschaft]. Friedrich Scheuermann (Hrsg.). - Münster [u.a.] : Waxmann, 2000. - (Medien in der Wissenschaft ; 10) ISBN 3-89325-925-2 Y1 - 2000 SP - 411 EP - 413 ER - TY - CHAP A1 - Mündemann, Friedhelm T1 - Kommunikationsmanagement in Telelern-Szenarien T2 - In: LearnTec 99 : 7. Europäischer Kongreß und Fachmesse für Bildungs- und Informationstechnologie; Tagungsband; [Karlsruhe, 9. - 11. Februar 1999] / Uwe Beck ... (Hrsg.). - Karlsruhe : Karlsruher Kongreß- und Ausstellungs-GmbH, 1999. - Karlsruhe : Karlsruher Kongreß- und Ausstellungs-GmbH, 1999. - (Schriftenreihe der Karlsruher Kongreß- und Ausstellungs-GmbH) Y1 - 1999 SP - 569 EP - 580 ER - TY - CHAP A1 - Mündemann, Friedhelm T1 - Kommunikationsmanagement in Telelern-Szenarien T2 - In: Berufsbildung '99 : fit im Beruf - fit für die Zukunft ; Dokumentation ; Nürnberg 1. bis 4. Dezember 1999 / [Fachausstellung für Aus- und Weiterbildung und 7. Bayerischer Berufsbildungskongress]. - München : Bayerisches Staatsministerium für Arbeit und Sozialordnung, Familie, Frauen und Gesundheit, 1999. - (Studien und Berichte zur Berufsbildung) Y1 - 1999 SP - 160 EP - 161 ER - TY - CHAP A1 - Claus, D. A1 - Beck, Eberhard A1 - Gmeiner, H.J. A1 - Puschmann, E. A1 - Brunhölzl, C. A1 - Jäger, W. A1 - Neundörfer, B. T1 - Neurotoxische Nebenwirkungen von Zytostatika T2 - In: Ophthalmoneurologie, Therapiekontrolle, Prävention : 65. Jahrestagung vom 23. - 26. September 1992 in Saarbrücken/ hrsg. von K. Schimrigk ... Unter Mitwirkung von M. Grundmann ... - Berlin, 1992. - (Verhandlungen der Deutschen Gesellschaft für Neurologie ; 7) (Tagung / Deutsche Gesellschaft für Neurologie ; 65). - ISBN: 3-924171-14-9 Y1 - 1992 SP - 738 EP - 740 ER - TY - CHAP A1 - Beck, Eberhard A1 - Hofmann, M. A1 - Kiesewetter, F. A1 - Jäger, W. A1 - Wildt, L. A1 - Lang, N. T1 - Analysis of CA 125 release by ovarian cancer cells in vitro T2 - In: Tumor associated antigens, oncogenes, receptors, cytokines in tumor diagnosis and therapy at the beginning of the nineties / 6th Symposium on Tumor Markers, Hamburg, [December 9. - 11. 1991] ; Satellite Symposium Cancer of the Breast - State and Trends in Diagnosis and Therapy. Ed. by R. - München [u.a.] : Zuckschwerdt, 1992. - ISBN 3-88603-444-5 Y1 - 1992 SP - 117 EP - 121 ER - TY - CHAP A1 - Beck, Eberhard A1 - Seidinger, M. A1 - Schneider, G. A. A1 - Schuster, M. A1 - Berg, A. A1 - Jäger, W. A1 - Wildt, L. A1 - Lang, N. T1 - Toxische Schädigungen des Gehörs unter Cisplatinhaltiger Chemotherapie bei Patientinnen mit gynäkologischen Tumoren T2 - In: Zytostatikabedingte Nebenwirkungen : Symposium in Pommersfelden, 3. - 4. Juli 1992 ; 26 Tabellen / Bd-Hrsg.: N. Lang ... - München [u.a.] : Zuckschwerdt, 1993. - Aktuelle Onkologie ; 8). - ISBN: 3-88603-458-5 Y1 - 1992 SP - 5 EP - 9 ER - TY - CHAP A1 - Hessel, V. A1 - Löwe, H. A1 - Haverkamp, V. A1 - Wille, Ch. A1 - Ehrfeld, W. A1 - Lutz, N. A1 - Möllmann, Klaus-Peter A1 - Pinno, Frank A1 - Herweck, Th. T1 - Dynamic monitoring of fluid equipartition and heat release in a falling film microreactor using real-time thermography T2 - In: MICRO.tec 2000 : applications - trends - visions ; proceedings / VDE World Microtechnologies Congress, September 25 - 27, 2000, Expo 2000, Hannover, Germany. Organized by VDE Association for Electrical, Electronic & Information Technologies. Sponsored by EUREL ... . - Berlin ; Offenbach : VDE-Verl. - Vol. 2. - 2000. - S. 349 - 354. - ISBN 3-8007-2579-7 Y1 - 2000 SP - 349 EP - 354 ER - TY - CHAP A1 - Henke, S. A1 - Karstädt, Detlef A1 - Möllmann, Klaus-Peter A1 - Pinno, Frank A1 - Vollmer, Michael T1 - Challenges in infrared imaging: low emissivities of hot gases, metals, and metallic cavities T2 - In: InfraMation 2004 : proceedings / sponsored and published by the Inframation Training Center .... - Vol. 5, 355-363 Y1 - 2004 SP - 355 EP - 363 ER - TY - CHAP A1 - Henke, S. A1 - Karstädt, Detlef A1 - Möllmann, Klaus-Peter A1 - Pinno, Frank A1 - Vollmer, Michael T1 - Identification and suppression of thermal reflections in infrared thermal imaging T2 - In: InfraMation 2004 : proceedings / sponsored and published by the Inframation Training Center .... - Vol. 5, 287-298 Y1 - 2004 SP - 287 EP - 298 ER - TY - CHAP A1 - Pinno, Frank A1 - Karstädt, Detlef A1 - Möllmann, Klaus-Peter A1 - Vollmer, Michael T1 - Using infrared thermography for optimization, quality control and minimization of damages of floor heating systems, T2 - In: InfraMation 2005 : proceedings / sponsored and published by the Inframation Training Center .... Vol. 6, 313-322 Y1 - 2005 SP - 313 EP - 322 ER - TY - CHAP A1 - Vollmer, Michael A1 - Karstädt, Detlef A1 - Möllmann, Klaus-Peter A1 - Pinno, Frank T1 - IR Thermography of microwave ovens T2 - In: InfraMation 2005 : proceedings / sponsored and published by the Inframation Training Center .... Vol.6, 29-40 Y1 - 2005 SP - 29 EP - 40 ER - TY - CHAP A1 - Möllmann, Klaus-Peter A1 - Karstädt, Detlef A1 - Pinno, Frank A1 - Vollmer, Michael T1 - Selected critical applications for thermography: convections in fluids, selective emitters and highly reflecting materials T2 - In: InfraMation 2005 : proceedings / sponsored and published by the Inframation Training Center .... Vol.6, 161-174 Y1 - 2005 SP - 161 EP - 174 ER - TY - CHAP A1 - Möllmann, Klaus-Peter A1 - Karstädt, Detlef A1 - Pinno, Frank A1 - Vollmer, Michael T1 - Thermal image quality – Visualization of spatial and thermal resolution in thermal imaging T2 - In: InfraMation proceedings Vol. 7 (2006), 79-92 Y1 - 2006 SP - 79 EP - 92 ER - TY - CHAP A1 - Pinno, Frank A1 - Karstädt, Detlef A1 - Möllmann, Klaus-Peter A1 - Vollmer, Michael T1 - Energy savings for an old factory building by optimisation of the heating system T2 - In: InfraMation 2006 : proceedings / sponsored and published by the Inframation Training Center ... Vol. 7, 253-262 Y1 - 2006 SP - 253 EP - 262 ER - TY - CHAP A1 - Vollmer, Michael A1 - Karstädt, Detlef A1 - Möllmann, Klaus-Peter A1 - Pinno, Frank T1 - Influence of gaseous species on thermal infrared imaging T2 - In: InfraMation 2006 : proceedings / sponsored and published by the Inframation Training Center .... Vol.7, 65-78 Y1 - 2006 SP - 65 EP - 78 ER - TY - CHAP A1 - Pinno, Frank A1 - Möllmann, Klaus-Peter A1 - Vollmer, Michael T1 - Cost and energy savings for a factory building after modernizing the heating system T2 - In: InfraMation 2007 : proceedings / sponsored and published by the Inframation Training Center .... Vol.8, 521-527 Y1 - 2007 SP - 521 EP - 527 ER - TY - CHAP A1 - Vollmer, Michael A1 - Möllmann, Klaus-Peter A1 - Pinno, Frank T1 - Looking through matter: quantitative IR imaging when observing through IR windows T2 - In: InfraMation 2007 : proceedings / sponsored and published by the Inframation Training Center .... Vol. 8, 109-127 Y1 - 2007 SP - 109 EP - 127 ER -