TY - JOUR A1 - Gedzelman, S. D. A1 - Vollmer, Michael T1 - Twice in a blue moon JF - In: Weatherwise 62 (2009) 5, 28-35 Y1 - 2009 SN - 0043-1672 SP - 28 EP - 35 ER - TY - CHAP A1 - Möllmann, Klaus-Peter A1 - Pinno, Frank A1 - Vollmer, Michael T1 - Two-color or ratio thermal imaging - potentials and limits T2 - In: InfraMation proceedings. - Vol. 11 (2010), pp.41-56 Y1 - 2010 SP - 41 EP - 56 ER - TY - JOUR A1 - Daupayev, Nursultan A1 - Engel, Christian A1 - Hirsch, Sören T1 - Two-to-One Trigger Mechanism for Event-Based Environmental Sensing JF - Sensors N2 - Environmental monitoring systems often operate continuously, measuring various parameters, including carbon dioxide levels (CO2), relative humidity (RH), temperature (T), and other factors that affect environmental conditions. Such systems are often referred to as smart systems because they can autonomously monitor and respond to environmental conditions and can be integrated both indoors and outdoors to detect, for example, structural anomalies. However, these systems typically have high energy consumption, data overload, and large equipment sizes, which makes them difficult to install in constrained spaces. Therefore, three challenges remain unresolved: efficient energy use, accurate data measurement, and compact installation. To address these limitations, this study proposes a two-to-one threshold sampling approach, where the CO2 measurement is activated when the specified T and RH change thresholds are exceeded. This event-driven method avoids redundant data collection, minimizes power consumption, and is suitable for resource-constrained embedded systems. The proposed approach was implemented on a low-power, small-form and self-made multivariate sensor based on the PIC16LF19156 microcontroller. In contrast, a commercial monitoring system and sensor modules based on the Arduino Uno were used for comparison. As a result, by activating only key points in the T and RH signals, the number of CO2 measurements was significantly reduced without loss of essential signal characteristics. Signal reconstruction from the reduced points demonstrated high accuracy, with a mean absolute error (MAE) of 0.0089 and root mean squared error (RMSE) of 0.0117. Despite reducing the number of CO2 measurements by approximately 41.9%, the essential characteristics of the signal were saved, highlighting the efficiency of the proposed approach. Despite its effectiveness in controlled conditions (in buildings, indoors), environmental factors such as the presence of people, ventilation systems, and room layout can significantly alter the dynamics of CO2 concentrations, which may limit the implementation of this approach. Future studies will focus on the study of adaptive threshold mechanisms and context-dependent models that can adjust to changing conditions. This approach will expand the scope of application of the proposed two-to-one sampling technique in various practical situations. Y1 - 2025 UR - https://www.mdpi.com/1424-8220/25/13/4107 U6 - https://doi.org/10.3390/s25134107 VL - 25 IS - 13 SP - 1 EP - 18 PB - MDPI ER - TY - RPRT A1 - Oertel, Christian T1 - Tyre models in vehicle dynamics: theory and application, part 1: vehicle dynamics tyre model Y1 - 2008 ER - TY - JOUR A1 - Oertel, Christian A1 - Wei, Yintao T1 - Tyre rolling kinematics and prediction of tyre forces and moments: part I - theory and method JF - In: Vehicle system dynamics 50 (2012) 11, 1673-1687 N2 - A new method to describe tyre rolling kinematics and how to calculate tyre forces and moments is presented. The Lagrange–Euler method is used to calculate the velocity and contact deformation of a tyre structure under large deformation. The calculation of structure deformation is based on the Lagrange method, while the Euler method is used to analyse the deformation and forces in the contact area. The method to predict tyre forces and moments is built using kinematic theory and nonlinear finite element analysis. A detailed analysis of the tyre tangential contact velocity and the relationships between contact forces, contact areas, lateral forces, and yaw and camber angles has been performed for specific tyres. Research on the parametric sensitivity of tyre lateral forces and self-aligning torque on tread stiffness and friction coefficients is carried out in the second part of this paper. Y1 - 2012 U6 - https://doi.org/10.1080/00423114.2012.694452 SP - 1673 EP - 1687 ER - TY - JOUR A1 - Wei, Yintao A1 - Oertel, Christian A1 - Shena, Xiaoliang T1 - Tyre rolling kinematics and prediction of tyre forces and moments: part II - simulation and experiment JF - In: Vehicle system dynamics 50 (2012) 11, 1689-1706 N2 - There are two aims for the second part of this paper: verifying the theory presented in the first part through parameter variation and comparison between simulation and experiment, and to study the effect of the belt structure on the cornering properties of radial tyres. Research has been carried out with a passenger car radial tyre and two different kinds of truck or bus radial tyres using both simulation and experiment. This second part of the paper shows that belt structure plays an important role in the generation of tyre forces and moments in addition to the effects of the tread stiffness and friction coefficients. The theory and method presented in this paper opens a new robust way to predict the tyre forces and moments from the tyre design and provides a reliable model for a generation mechanism. Y1 - 2012 U6 - https://doi.org/10.1080/00423114.2012.694453 SP - 1689 EP - 1706 ER - TY - JOUR A1 - Niehus, Christina A1 - Möllmann, Klaus-Peter A1 - Trull, Thomas A1 - Vollmer, Michael T1 - Umweltanalytik mit Atomabsorptions- und Fourier-Transform-Infrarot- Spektroskopie JF - In: Praxis der Naturwissenschaften – Physik in der Schule 52 (2003) 4, 29-36 Y1 - 2003 SP - 29 EP - 36 ER - TY - JOUR A1 - Vollmer, Michael A1 - Möllmann, Klaus-Peter T1 - Und es werde Feuer BT - Teil 1: Streichhölzer JF - Physik in unserer Zeit Y1 - 2017 U6 - https://doi.org/10.1002/piuz.201601467 SN - 1521-3943 (Online) SN - 0031-9252 (Print) VL - 48 IS - 1 SP - 43 EP - 44 ER - TY - JOUR A1 - Vollmer, Michael A1 - Möllmann, Klaus-Peter T1 - Und es werde Feuer BT - Teil 2: Feuerzeuge JF - Physik in unserer Zeit Y1 - 2017 U6 - https://doi.org/10.1002/piuz.201701474 SN - 1521-3943 (Online) SN - 0031-9252 (Print) VL - 48 IS - 2 SP - 96 EP - 97 ER - TY - JOUR A1 - Vollmer, Michael A1 - Möllmann, Klaus-Peter T1 - Und sie dreht sich doch … JF - Physik in unserer Zeit Y1 - 2018 U6 - https://doi.org/10.1002/piuz.201801525 VL - 49 IS - 5 SP - 254 EP - 254 ER - TY - GEN A1 - Kraska, Martin T1 - Universalberechnungssoftware SMath Studio für technische Berechnungen im Studiengang Maschinenbau & Virtuelle Mechanik-Experimente Y1 - 2014 ER - TY - JOUR A1 - Edel, Karl-Otto T1 - Universitäten sind Veranstaltungen des Staates BT - Marksteine der Brandenburgischen Geschichte / Teil 4: Hochschulen in der Mark Brandenburg JF - Brandenburger Wochenblatt : BRAWO (11. Juni 2007) Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus4-16069 SP - 7 ER - TY - JOUR A1 - Ogashawara, Igor A1 - Wollrab, Sabine A1 - Berger, Stella A. A1 - Kiel, Christine A1 - Jechow, Andreas A1 - Guislain, Alexis L. N. A1 - Gege, Peter A1 - Ruhtz, Thomas A1 - Hieronymi, Martin A1 - Schneider, Thomas A1 - Lischeid, Gunnar A1 - Singer, Gabriel A. A1 - Hölker, Franz A1 - Grossart, Hans-Peter A1 - Nejstgaard, Jens Christian T1 - Unleashing the power of remote sensing data in aquatic research: Guidelines for optimal utilization JF - Limnology and Oceanography Letters N2 - The growing utilization of remote sensing data in lake studies provides crucial spatial insights into biogeochemistry and biology. However, clarity regarding the development and intended use of remote sensing products is often lacking. This letter aims to elucidate the tradeoffs for the utilization of remote sensing data in limnological studies with an example of based on the estimation of chlorophyll a due to its importance as a water quality indicator. The analysis initiates with a meticulous product selection, requiring an evaluation of its capacity to address the optical complexity of freshwater systems. Assessing atmospheric correction and product limitations ensures alignment with the study's objectives. Subsequently, rigorous validation of remote sensing products is essential, accompanied by a cautious interpretation of the data. This letter advocates for the use of remote sensing data, offering key strategies for their optimal utilization in lake studies. Y1 - 2024 U6 - https://doi.org/10.1002/lol2.10427 SP - 1 EP - 7 PB - Wiley ER - TY - JOUR A1 - Vollmer, Michael T1 - Unschuldige Schule! : In den vergangenen Jahren hat zwar die Zahl der Physikstudenten dramatisch abgenommen, nicht aber die Zahl der Schüler, die in der Oberstufe Physik wählen JF - In: Physikalische Blätter 56 (2000) 6, 21-22 Y1 - 2000 U6 - https://doi.org/10.1002/phbl.20000560606 SP - 21 EP - 22 ER - TY - JOUR A1 - Vollmer, Michael A1 - Möllmann, Klaus-Peter T1 - Unsichtbares sichtbar gemacht: Infrarotkameras für Smartphones JF - Physik in unserer Zeit KW - Infrarotkamera KW - Smartphone KW - Temperaturmessung KW - räumliche Auflösung KW - qualitative Analyse KW - quantitative Analyse Y1 - 2020 U6 - https://doi.org/https://doi.org/10.1002/piuz.201901551 VL - 51 IS - 1 SP - 29 EP - 35 PB - Wiley-VCH ER - TY - RPRT A1 - Schugardt, Alexander T1 - Untersuchung der Rotorfestigkeit von permanenterregten Synchronmaschinen mit vergrabenen Magneten N2 - Diese Projektarbeit behandelt die mechanische Simulation der Rotoren von permanenterregten Synchronmaschinen für den Festigkeitsnachweis. Hierzu wird die Finite-Elemente-Methode mit dem Programm CalculiX verwendet. Als Beispiel wird der Elektromotor des Toyota Prius II im Detail betrachtet. Hierbei werden die unterschiedlichen Lasten modelliert, dazu zählen neben der Zentrifugalkraft auch der Innendruck durch eine Presspassung sowie die elektromagnetischen Kräfte. Für die Modellierung von Kräften auf der Rotoroberfläche wird eine Methodik zur Umsetzung in CalculiX entwickelt und anhand eines Beispielmodells demonstriert. Der angestrebte Festigkeitsnachweis kann im Rahmen dieser Arbeit erbracht werden. Weiterhin wird gezeigt, dass der Einfluss der elektromagnetischen Kräfte im Arbeitspunkt mit der höchsten Drehzahl sehr gering ausfällt. Insgesamt bietet diese Arbeit die Grundlagen für mechanische Modellierungen von Rotoren unter Berücksichtigung aller Kräfte. Dies kann direkt auf andere Elektromotoren angewendet werden. KW - Rotor KW - Finite-Elemente-Methode KW - Elektromotor Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus4-29610 PB - Technische Hochschule Brandenburg CY - Brandenburg an der Havel ER - TY - CHAP A1 - Wieneke-Toutaoui, Burghilde A1 - Schmütz, Jörg A1 - Fritz, Alfred Herbert T1 - Urformen T2 - Fertigungstechnik KW - Fertigungstechnik Y1 - 2018 SN - 978-3-662-56534-6 SN - 978-3-662-56535-3 U6 - https://doi.org/10.1007/978-3-662-56535-3_2 SP - 7 EP - 132 PB - Springer Vieweg CY - Berlin / Heidelberg ET - 12 ER - TY - CHAP A1 - Pinno, Frank A1 - Karstädt, Detlef A1 - Möllmann, Klaus-Peter A1 - Vollmer, Michael T1 - Using infrared thermography for optimization, quality control and minimization of damages of floor heating systems, T2 - In: InfraMation 2005 : proceedings / sponsored and published by the Inframation Training Center .... Vol. 6, 313-322 Y1 - 2005 SP - 313 EP - 322 ER - TY - JOUR A1 - Vollmer, Michael T1 - Vakuumphysik im Alltag: Physikalische Freihand- und Low-cost-Experimente JF - In: PhyDid A - Physik und Didaktik in Schule und Hochschule 1 (2002) 1, 19-32 N2 - Es werden eine Reihe einfacher Freihandexperimente zum Thema Unterdruck vorgestellt. Viele der Beispiele sind vom grundlegenden Aufbau her bekannt, gestatten jedoch neue Varianten, Erweiterungen bzw. die Korrektur von Fehlvorstellungen. Neben der Druckmessung in Einmachgläsern und der Funktionsweise von Ausgussreinigern und Saughaken werden Druck- sowie Tragfähigkeitsmessungen an Staubsaugern diskutiert. Des weiteren wird untersucht, welche Saughöhe per Strohhalm realisiert werden kann. Es wird eine physikalisch einleuchtende, aber dennoch verblüffende Erweiterung des Versuchs mit dem umgedrehten Wasserglas präsentiert. Y1 - 2002 UR - http://www.phydid.de/index.php/phydid/article/view/2/2 SP - 19 EP - 32 ER - TY - JOUR A1 - Vollmer, Michael A1 - Möllmann, Klaus-Peter T1 - Vapour pressure and adiabatic cooling from champagne: slow motion visualization of gas thermodynamics JF - In: Physics Education 47 (2012) 5, 608–615 Y1 - 2012 SP - 608 EP - 615 ER -