TY - JOUR A1 - Wilden, Johannes A1 - Jahn, Simon A1 - Melahin, Natalie A1 - Rehfeldt, Lars A1 - Luhn, Thomas A1 - Goecke, Sven-Frithjof A1 - Schmid, Eberhard A1 - Berger, Uwe T1 - Löten als Schlüssel zum ressourcen- und energieeffizienten Fügen im Produktlebenszyklus JF - In: Schweissen und Schneiden 62 (2010) 5, 264-277 N2 - Der Einsatz von Lötverfahren zum Fügen reduziert gegenüber der Schweißtechnik die Prozesstemperaturen und ermöglicht sowohl die Realisierung anspruchsvoller Mischverbindungen als auch das Fügen verzinkter Stähle mit minimaler Zinkschichtverletzung. Aktuelle Entwicklungen von Lotwerkstoffen zielen sowohl in Richtung Absenkung der Schmelztemperaturen als auch in Richtung Festigkeitssteigerung, um die Anwendungsmöglichkeiten noch weiter zu vervielfältigen. Dabei unterliegen sowohl Eisenbasislegierungen als auch Systeme auf Kupfer- oder Zinkbasis einer stetigen Weiterentwicklung. Die bereits heute erreichbaren Festigkeiten reichen bis etwa 900 MPa (CuAl8Mn13Ni2Fe2) bei Kupferbasislegierungen und 410 MPa (AnAl7,5Cu2,5 + 180 ppm Mg) bei Zinklegierungen. Neben der Energieeinsparung durch die reduzierten Prozesstemperaturen beim Fügen und der Möglichkeit Hybridstrukturen herzustellen, ergeben sich außerdem Vorteile bei der Reparatur und dem Recycling von Bauteilen. Da der Zusatzwerkstoff unabhängig vom Grundwerkstoff wiederaufgeschmolzen werden kann, sind eine leichtere Reparatur und auch ein Trennen der Bauteile zum Recycling möglich. Dies führt bei Betrachtung des gesamten Produktlebenszyklus zu einer höheren Energieeffizienz und einer Schonung der natürlichen Rohstoffe und Ressourcen. Durch die steigenden Energie- und Werkstoffkosten und den damit verbundenen Kostendruck rückt dieser Aspekt neben der Machbarkeit und Produktivität langsam, aber sicher ins Blickfeld der Unternehmen. Kostenvorteile ergeben sich außerdem durch Betrachtung und Modifikation ganzer Fertigungsketten. Niedrigschmelzende Zusatzwerkstoffe ermöglichen beispielsweise das Fügen verzinkter Halbzeuge ohne Zinkschichtverletzung. Da Halbzeuge in großen Mengen kostengünstiger verzinkt werden können als fertige Konstruktionen, ist das Fügen verzinkter Halbzeuge insgesamt günstiger als das Verzinken geschweißter Stahlkonstruktionen. Y1 - 2010 SP - 264 EP - 277 ER - TY - CHAP A1 - Goecke, Sven-Frithjof A1 - Bergmann, J. P. A1 - Witte, K.-H. T1 - Steigerung der Ressourceneffizienz des MSG-Schweißens T2 - In: DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vorträge der Veranstaltungen in Saarbrücken am 17. und 18. September 2012 / Veranst.: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren. - Düsseldorf : DVS Media, 2012. - (DVS-Berichte / DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V., ISSN 0418-9639 ; 286). - ISBN 3-87155-593-2, 978-3-87155-593-0 Y1 - 2012 SP - 263 EP - 264 ER - TY - CHAP A1 - Goecke, Sven-Frithjof A1 - Hübner, M. A1 - Penning, O. A1 - Höcker, F. A1 - Suchodoll, D. T1 - Steigerung der Ressourceneffizienz des MSG-Schweissens T2 - In: DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vorträge der Veranstaltungen in Saarbrücken am 17. und 18. September 2012 / Veranst.: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren. - Düsseldorf : DVS Media, 2012. - (DVS-Berichte / DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V., ISSN 0418-9639 ; 286). - ISBN 3-87155-593-2, 978-3-87155-593-0 Y1 - 2012 SP - 265 EP - 268 ER - TY - CHAP A1 - Wilden, J. A1 - Jahn, S. A1 - Sabelfeld, N. A1 - Rehfeldt, L. A1 - Luhn, T. A1 - Goecke, Sven-Frithjof A1 - Schmid, E. A1 - Berger, U. T1 - Löten als Schlüssel zum ressourcen - und energieeffizienten Fügen im Produktlebenszyklus T1 - Soldering as a key to resource- and energy-efficient adding in the product life cycle T2 - In: Hart- und Hochtemperaturlöten und Diffusionsschweißen : LÖT 2010; Vorträge und Posterbeiträge des 9. internationalen Kolloquiums in Aachen vom 15. bis 17. Juni 2010 = Brazing, high temperature brazing and diffusion bonding / Gemeinschaftsveranstaltung von DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V., Düsseldorf ... - Düsseldorf : DVS Media, 2010. - (DVS-Berichte ; 263) - ISBN 978-3-87155-589-3 ; 3-87155-589-4 Y1 - 2010 SP - 159 EP - 163 ER - TY - JOUR A1 - Rose, Sascha A1 - Zähr, Julia A1 - Schnick, Michael A1 - Füssel, Uwe A1 - Goecke, Sven-Frithjof A1 - Hübner, Mark T1 - Arc attachments on aluminium during tungsten electrode positive polarity in TIG welding of aluminium JF - In: Welding in the World 55 (2011) 9-10, pp 91-99 N2 - In modem AC power sources, both balance and current of EP (tungsten electrode positive) and EN (tungsten electrode negative) can be readily adjusted. According to conventional assumptions the surface of aluminium workpieces is cleaned during EP but the tungsten electrode is more heated due to electron work function. During EN the tungsten electrode cools down and the workpiece is melted. Therefore, optimal settings of the power source mostly aim for maximal penetration and minimal electrode wear. This paper presents a study of arc attachments in TIG welding on aluminium. Two different arc attachments to the cathodic workpiece could be attested with only one of them actually cleaning the surface. The first one is a spot mode (highly dynamic) that attaches to the edges of oxide layers and cracks them. The second one is also a spot mode, but it attaches to weld pools. It does not clean the surface but heats the base material intensively. Both arc attachment modes compete against each other. As a result, the cleaning area narrows with wider weld pools due to an increasing attachment to the weld pool during EP. The influences on the arc attachment to the aluminium cathode as well as the contradictions in present literature are discussed. Possible adjustments of the AC balance for optimized processes are proposed. Y1 - 2011 U6 - https://doi.org/10.1007/bf03321325 SN - 1878-6669 VL - 55 IS - 9-10 SP - 91 EP - 99 ER - TY - JOUR A1 - Wilden, J. A1 - Jahn, S. A1 - Melahin, N. A1 - Rehfeldt, L. A1 - Luhn, T. A1 - Goecke, Sven-Frithjof A1 - Schmid, E. A1 - Berger, U. T1 - Brazing as the key to resource-efficient and energy-efficient joining in the product life cycle JF - In: Welding and cutting (2010) 5, 301-312 Y1 - 2010 SN - 1612-3433 SP - 301 EP - 312 ER - TY - JOUR A1 - Wilden, J. A1 - Jahn, S. A1 - Milahin, N. A1 - Luhn, T. A1 - Rehfeldt, L. A1 - Goecke, Sven-Frithjof A1 - Schmid, E. A1 - Berger, U. T1 - Perspektiven und Visionen zum Schweissen moderner Stahlwerkstoffe JF - In: Stahl und Eisen 130 (2010) 10, S. 71-75 Y1 - 2010 SN - 0340-4803 SP - 71 EP - 75 ER - TY - CHAP A1 - Goecke, Sven-Frithjof A1 - Bergmann, J. P. A1 - Witte, K.-H. T1 - Die Effizienzfabrik - Schwerpunkte und Analysemöglichkeiten aus Sicht der Schweißtechnik zur ressourceneffizienten Fertigung T2 - In: DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vorträge der Veranstaltungen in Saarbrücken am 17. und 18. September 2012 / Veranst.: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren Y1 - 2012 SN - 978-3-87155-593-0 N1 - Gehört zu: Deutscher Verband für Schweißen und Verwandte Verfahren: DVS-Berichte ; Bd. 286 SP - 263 EP - 264 PB - DVS-Media CY - Düsseldorf ER - TY - CHAP A1 - Ebert-Spiegel, M. A1 - Goecke, Sven-Frithjof A1 - Rethmeier, M. T1 - Adaptive Regelung ermöglicht Fügespaltkompensation beim MAG-Schweißen T2 - DVS Congress 2013 : Große Schweißtechnische Tagung, DVS-Studentenkongress, 4. DVS-Forum Schulung und Prüfung ; Vorträge der Veranstaltungen in Essen vom 16. bis 21. September 2013 Y1 - 2013 SN - 978-3-87155-614-2 SP - 121 EP - 126 PB - DVS Media CY - Düsseldorf ER - TY - JOUR A1 - Ebert-Spiegel, M. A1 - Goecke, Sven-Frithjof A1 - Rethmeier, M. T1 - Efficient gap filling in MAG welding using optical sensors JF - Welding in the World Y1 - 2014 U6 - https://doi.org/10.1007/s40194-014-0145-8 SN - 0043-2288 (print) SN - 1878-6669 (online) VL - 58 IS - 5 SP - 637 EP - 647 ER - TY - CHAP A1 - Goecke, Sven-Frithjof T1 - Visualisation and Control of the Heat Input in MAG Welding of Ultra-High-Strength Manganese-Boron Steels T2 - Visual-JW 2014, November 26−28th, Proceedings of the International Symposium on Visualization in Joining & Welding Science through Advanced Measurements and Simulation, 28−30 November, Joining and Welding Research Institute − JWRI, Osaka University 2014, Osaka, Japan, (2014); JWP-15 Y1 - 2014 SP - 35 EP - 36 ER - TY - CHAP A1 - Möller, F. A1 - Kügler, H. A1 - Kötschau, S. A1 - Geier, A. A1 - Goecke, Sven-Frithjof T1 - Gap Bridging Ability in Laser GMA Hybrid Welding of Thin 22MnB5 Sheets T2 - Physics Procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014 Y1 - 2014 U6 - https://doi.org/doi:10.1016/j.phpro.2014.08.052 SN - 1875-3892 ; 1875-3884 VL - 56 SP - 620 EP - 629 ER - TY - CHAP A1 - Müller, A. A1 - Goecke, Sven-Frithjof T1 - Investigation on laser beam oscillation for fi llet welds in lap joints T2 - JOM-17 : Seventeenth International Conference on Joining of Materials ; Helsingør, Denmark, Konventum Lo Skolen, 5 - 8 May 2013 Y1 - 2013 ER - TY - JOUR A1 - Müller, A. A1 - Goecke, Sven-Frithjof A1 - Albert, F. A1 - Sievi, P. A1 - Baum, S. T1 - Nahtgeführtes Laserstrahl-Remoteschweißen mit örtlicher Strahloszillation JF - Schweißen und Schneiden Y1 - 2013 SN - 0036-7184 VL - 65 IS - 9 SP - 631 EP - 635 ER - TY - JOUR A1 - Müller, A. A1 - Goecke, Sven-Frithjof A1 - Rethmeier, M. T1 - Laser beam oscillation for fillet welding JF - Welding in the World Y1 - 2014 U6 - https://doi.org/10.1007/s40194-014-0165-4 SN - 1878-6669 (online) SN - 0043-2288 (print) VL - 58 IS - 6 SP - 865 EP - 872 ER - TY - CHAP A1 - Möller, F. A1 - Mittelstädt, C. A1 - Kötschau, S. A1 - Thomy, C. A1 - Goecke, Sven-Frithjof A1 - Vollertsen, F. T1 - Effect of process parameters on joint properties in laser GMA hybrid welding of thin-sheet fillet welds on 22MnB5 T2 - IIW 2013 Annual Assembly Com. XVII, Essen (2013) IIW-Doc. XII-2129- 13; IV- 1138-13 (online) Y1 - 2013 ER - TY - CHAP A1 - Ebert-Spiegel, Michael A1 - Goecke, Sven-Frithjof T1 - Adaptive Regelung ermöglicht Fügespaltkompensation beim MAG-Schweißen T2 - 15. Nachwuchswissenschaftlerkonferenz : Tagungsband Y1 - 2014 UR - https://www.hs-magdeburg.de/fileadmin/user_upload/Einrichtungen/Pressestelle/files/nwk-15/Tagungsband-NWK15.pdf SN - 978-3-935831-58-1 SP - 185 EP - 191 ER - TY - GEN A1 - Ebert-Spiegel, M. A1 - Goecke, Sven-Frithjof A1 - Rethmeier, M. T1 - Possibilities for compensating a higher heat input, in particular by the torch off set relative to the top sheet at the fillet weld on a lap joint Y1 - 2014 ER - TY - GEN A1 - Ebert-Spiegel, M. A1 - Goecke, Sven-Frithjof A1 - Rethmeier, M. T1 - Efficient gap filling in MAG welding using optical sensors Y1 - 2013 ER - TY - GEN A1 - Müller, A. A1 - Goecke, Sven-Frithjof A1 - Rethmeier, M. T1 - Laser beam oscillation for fillet welding Y1 - 2013 ER -