TY - JOUR A1 - Dauber, Ben A1 - Meyer, Philipp A1 - Kindsmüller, Martin Christof ED - Koch, Michael T1 - The potential of smart glasses for smart homes JF - Mensch und Computer 2014 - Tagungsband : 14. Fachübergreifende Konferenz für Interaktive und Kooperative Medien - Interaktiv unterwegs - Freiräume gestalten Y1 - 2014 SN - 978-3-11-034415-8 SP - 379 EP - 382 PB - De Gruyter Oldenbourg CY - München ; Berlin ; Boston, Mass. ER - TY - JOUR A1 - Rojek, Lukasz A1 - Islam, Saiful A1 - Hartmann, Michael A1 - Creutzburg, Reiner T1 - IoT-Based Real-Time Monitoring System for a Smart Energy House JF - Electronic Imaging KW - AI KW - Raspberry Pi KW - low cost sensors KW - monitoring KW - networking KW - real-time KW - smart energy house KW - smart home Y1 - 2021 U6 - https://doi.org/10.2352/ISSN.2470-1173.2021.3.MOBMU-038 SN - 2470-1173 SP - 38-1 EP - 38-10 PB - Society for Imaging Science and Technology CY - Springfield, VA ER - TY - JOUR A1 - Kant, Daniel A1 - Creutzburg, Reiner A1 - Johannsen, Andreas T1 - Investigation of risks for Critical Infrastructures due to the exposure of SCADA systems and industrial controls on the Internet based on the search engine Shodan JF - Electronic Imaging KW - Industrial Control System KW - ICS KW - critical infrastructure KW - energy supply KW - Shodan KW - human machine interface KW - industrial protocols KW - remote control protocols KW - remote maintenance protocols Y1 - 2020 U6 - https://doi.org/10.2352/ISSN.2470-1173.2020.3.MOBMU-253 SN - 2470-1173 SP - 253-1 EP - 253-16 PB - Society for Imaging Science and Technology CY - Springfield, VA ER - TY - JOUR A1 - Linke, Christian A1 - Mantke, René A1 - Creutzburg, Reiner T1 - International Biobanking Interface Service – A Concept forHealth Sciences in the Digital Age JF - Electronic Imaging KW - biobank KW - digital healthcare KW - eHealth KW - mHealth KW - mobile healthcare Y1 - 2020 U6 - https://doi.org/10.2352/ISSN.2470-1173.2020.3.MOBMU-304 SN - 2470-1173 SP - 304-1 EP - 304-6 PB - Society for Imaging Science and Technology CY - Springfield, VA ER - TY - JOUR A1 - Schnitzer, Julia T1 - Generative Design For Creators – The Impact Of Data Driven Visualization And Processing In The Field Of Creative Business JF - Electronic Imaging Y1 - 2021 U6 - https://doi.org/10.2352/ISSN.2470-1173.2021.3.MOBMU-022 SN - 2470-1173 SP - 022-1 EP - 022-6 PB - Society for Imaging Science and Technology CY - Springfield, VA ER - TY - JOUR A1 - Oeppert, Luise A1 - Hartz, Tobias A1 - Wehner, Kathrin A1 - Schrader, Thomas A1 - Meier, Jens T1 - FHIR-Datenmodell zur Übermittlung von Tumordaten zwischen Krebsregistern und IQTIG JF - GMS Medizinische Informatik, Biometrie und Epidemiologie KW - Computer applications to medicine KW - Medical informatics KW - Internal medicine KW - Infectious and parasitic diseases Y1 - 2021 UR - https://doaj.org/article/dc0151fdba764800ac9c652e3ad4eb40 U6 - https://doi.org/10.3205/mibe000231 VL - 17 IS - Iss 4 PB - German Medical Science GMS Publishing House ER - TY - JOUR A1 - Kiertscher, Tobias A1 - Nitze, André T1 - Erfahrungsbericht über Docker ohne Cloud JF - Java-Spektrum : Magazin für professionellen Einsatz von Java, Web-Technologien und XML Y1 - 2018 SN - 1431-4436 IS - 3/2018 SP - 20 EP - 24 ER - TY - JOUR A1 - Boersch, Ingo A1 - Füssel, Uwe A1 - Gresch, Christoph A1 - Großmann, Christoph A1 - Hoffmann, Benjamin ED - London, Springer T1 - Data mining in resistance spot welding - A non-destructive method to predict the welding spot diameter by monitoring process parameters JF - The International Journal of Advanced Manufacturing Technology N2 - Resistance spot welding is the dominant process in the present mass production of steel constructions without sealing requirements with single sheet thicknesses up to 3 mm. Two of the main applications of resistance spot welding are the automobile and the railway vehicle manufacturing industry. The majority of these connections has safety-related character and therefore they must not fall below a certain weld diameter. Since resistance spot welding has been established, this weld diameter has been usually used as the gold standard. Despite intensive efforts, there has not been found yet a reliable method to detect this connection quality non-destructively. Considerable amounts of money and steel sheets are wasted on making sure that the process does not result in faulty joints. The indication of the weld diameter by in-process monitoring in a reliable way would allow the quality documentation of joints during the welding process and additionally lead through demand-actuated milling cycles to a substantial decrease of electrode consumption. An annual, estimated reduction in the seven- to nine-figure range could be achieved. It has an important impact, because the economics of the process is essentially characterized by the electrode caps (Klages 24). We propose a simple and straightforward approach using data mining techniques to accurately predict the weld diameter from recorded data during the welding process. In this paper, we describe the methods used during data preprocessing and segmentation, feature extraction and selection, and model creation and validation. We achieve promising results during an analysis of more than 3000 classified welds using a model tree as a predictor with a success rate of 93 %. In the future, we hope to validate our model with unseen welding data and implement it in a real world application. KW - Resistance spot welding KW - Electrode life prognosis KW - Data mining KW - Feature extraction KW - Model selection Y1 - 2016 UR - http://link.springer.com/article/10.1007/s00170-016-9847-y U6 - https://doi.org/10.1007/s00170-016-9847-y ER - TY - JOUR A1 - Cabanac, Guillaume A1 - Preuss, Thomas T1 - Capitalizing on order effects in the bids of peer-reviewed conferences to secure reviews by expert referees JF - Journal of the Association for Information Science and Technology (JASIST) Y1 - 2012 SN - 1532-2890 (online) SN - 1532-2882 (print) VL - 64 IS - 2 SP - 405 EP - 415 ER - TY - JOUR A1 - Kell, Gerald A1 - Schulz, Daniel A1 - Mrkor, Kai-Uwe T1 - Application of IHP’s SiGe-Technology for very fast data processing JF - Activity Report 2016 / Europactice Y1 - 2016 UR - http://www.europractice-ic.com/docs/europractice_jv2016.pdf SP - 41 EP - 42 ER - TY - JOUR A1 - Schön, Stefan A1 - Band, Ricardo A1 - Pleban, Johann A1 - Creutzburg, Reiner A1 - Fischer, Arno T1 - Anwendung von autonom fliegenden Robotern in Wirtschaft sowie Lehre in der Informatik JF - Forschungsbericht 2011 - 2012 Y1 - 2014 SP - 123 EP - 128 PB - Fachhochschule Brandenburg CY - Brandenburg ER - TY - JOUR A1 - Kant, Daniel A1 - Johannsen, Andreas A1 - Creutzburg, Reiner T1 - Analysis of IoT Security Risks based on the exposure of the MQTT Protocol JF - Electronic Imaging KW - Internet of Things KW - Industrial Internet of Thing KW - IoT KW - IIoT KW - MQTT KW - IoT protocol KW - IIoT protocol KW - IoT security KW - IIoT security KW - MQTT vulnerability Y1 - 2021 UR - https://itwirtschaft.de/wp-content/uploads/2021/02/2021_Electronic-Imaging_IoT_Security-BASIC-1.pdf U6 - https://doi.org/10.2352/ISSN.2470-1173.2021.3.MOBMU-096 N1 - Paper was created within the German program "Mittelstand (SME) 4.0 - Competence Center for IT Economy" of the Ministry for Economic Affairs and Energy VL - 33 SP - 096-1 EP - 096-8 PB - Society for Imaging Science and Technology ER -