TY - JOUR A1 - Socher, Rolf A1 - Beck, Eberhard A1 - Schrader, Thomas A1 - Löwe, Katharina A1 - Kindsmüller, Martin Christof A1 - Syrjakow, Michael A1 - Vielhauer, Claus A1 - Liefold, Marius A1 - Hasche, Eberhard A1 - Götze, Thomas A1 - Goecke, Sven-Frithjof A1 - Hirsch, Sören A1 - Hoier, Bernhard A1 - Kraska, Martin A1 - Malessa, Reiner A1 - Möllmann, Klaus-Peter A1 - Pinno, Frank A1 - Mieke, Christian A1 - Vollmer, Michael A1 - Burger-Menzel, Bettina A1 - Frosch, Katharina A1 - Johannsen, Andreas A1 - Meiser, Vera G. A1 - Scheeg, Jochen A1 - Schwill, Jürgen A1 - Höding, Michael A1 - Lüthy, Anja A1 - Stokar von Neuforn, Daniela A1 - Wilms, Andreas A1 - Edel, Karl-Otto A1 - Pusch, Gerhard A1 - Parsch, Stefan A1 - Höft, Uwe A1 - Loose, Harald A1 - Tetzlaff, Laura A1 - Orlowski, Katja A1 - Kell, Gerald T1 - Forschungsbericht der Technischen Hochschule Brandenburg 2015-2016 N2 - Mit den Forschungsberichten bietet die Technische Hochschule Brandenburg einen regelmäßigen Überblick zu den Forschungsthemen und -projekten der Hochschule. T2 - Research Report of the Brandenburg University of Applied Sciences T3 - Forschungsbericht der Technischen Hochschule Brandenburg - 2015/2016 Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus4-19510 SN - 1861-3462 PB - Technische Hochschule Brandenburg CY - Brandenburg an der Havel ET - Berichtszeitraum: WS 2014/15; SS 2016 ER - TY - CHAP A1 - Kraska, Martin A1 - Doig, Maria A1 - Malek, Roland T1 - Thermo-mechanische Simulation des Presshärtens mit ABAQUS T2 - Multifunktionelle Bauteile und Verfahren zur Erhöhung der Wertschöpfung in der Blechbearbeitung ; [EFB-Kolloquium, 15. und 16. Februar 2005, Uhlandsaal, Schwabenhalle Fellbach] Y1 - 2005 SP - 223 EP - 232 PB - EFB CY - Hannover ER - TY - CHAP A1 - Kraska, Martin A1 - Herdy, M. A1 - Damhrdt, J. A1 - Roll, K. ED - Banabic, Dorel T1 - Material Parameters for Stamping Simulations Based on Tensile and Tension-Compression Tes T2 - Proceedings of the 8th ESAFORM Conference on Material Forming, "ESAFORM 2005", 27th - 29th April 2005, Cluj-Napoca, Romania Y1 - 2005 SN - 973-27-1174-4 SP - 49 EP - 52 PB - Publ. House of the Romanian Acad. CY - Bucharest ER - TY - CHAP A1 - Doig, M. A1 - Tikhomirov, M. A1 - Kraska, Martin A1 - Roll, K. T1 - Industrial challenges for finite element and multiscale methods for material modeling BT - Proceedings of the 12th ESAFORM Conference on Material Forming, Enschede (Netherlands), 27–29 April 2009 T2 - International journal of material forming Y1 - 2009 U6 - https://doi.org/10.1007/s12289-009-0425-9 SN - 1960-6214 ; 1960-6206 VL - Vol. 2 IS - Suppl. 2 SP - 887 EP - 890 ER - TY - JOUR A1 - Kraska, Martin A1 - Doig, M. A1 - Tikhomirov, D. A1 - Raabe, D. A1 - Roters, F. T1 - Virtual material testing for stamping simulations based on polycrystal plasticity JF - Computational materials science Y1 - 2009 U6 - https://doi.org/10.1016/j.commatsci.2009.03.025 SN - 0927-0256 (Print) SN - 1879-0801 (Online) VL - Vol. 46 IS - 2 SP - 383 EP - 392 ER - TY - CHAP A1 - Doig, M. A1 - Kraska, Martin A1 - Eßer, G. A1 - Kaupper, M. A1 - Merklein, M. A1 - Keßler, L. A1 - Gerlach, J. T1 - Inverse Parameteridentifikation mittels Biegeversuchen T2 - Tagungsband Werkstoffprüfung Y1 - 2009 SP - 110 EP - 115 PB - Verlag Stahleisen GmbH ER - TY - JOUR A1 - Kraska, Martin T1 - Materialien mit isomorphen elastischen Bereichen BT - Teil 2: Berechnung finiter inelastischer Verformungen von Einkristallen JF - BAM-Bericht Y1 - 1995 ER - TY - CHAP A1 - Mackeprang, J. A1 - Kraska, Martin T1 - Der Ballonkran und seine Anwendung T2 - Jahrestreffen der "Initiative Zukunft in Brand", Walldorf, 6. Mai 2006 Y1 - 2006 ER - TY - CHAP A1 - Kraska, Martin T1 - Der Einsatz von ABAQUS in der Lastenrechnung für den CargoLifter CL 160 T2 - Kolloquium "Werkstoffe in der Luftfahrttechnik" der GKSS mit dem SFB 371 "Mikromechanik mehrphasiger Werkstoffe", Geesthacht, 6. November 2001 Y1 - 2001 ER - TY - JOUR A1 - Böhlke, T. A1 - Kraska, Martin A1 - Bertram, A. T1 - Simulation der einfachen Scherung einer polykristallinen Aluminiumprobe JF - Technische Mechanik Y1 - 1997 SN - 0232-3869 (print) SN - 2199-9244 (online) VL - 17 IS - Sonderheft SP - 47 EP - 57 ER - TY - CHAP A1 - Kraska, Martin ED - Bruhns, Otto T1 - Randbedingungen und Anfangsorientierungen für Polykristallsimulation mit Finiten Elementen T2 - Grosse plastische Formänderungen : Bad Honnef 1997 Y1 - 1998 SP - 39 EP - 42 PB - Inst. für Mechanik CY - Bochum ER - TY - CHAP A1 - Bertram, A. A1 - Böhlke, T. A1 - Kraska, Martin ED - Bruhns, Otto T1 - Texture development of aluminium polycrystals under finite plasic deformations T2 - IUTAM Symposium on Micro- and Macrostructural Aspects of Thermoplasticity : proceedings of the IUTAM symposium held in Bochum, Germany, 25 - 29 August 1997 Y1 - 1999 SN - 0-7923-5265-3 SP - 127 EP - 136 PB - Kluwer Academic Publishers CY - Dordrecht [u.a.] ER - TY - CHAP A1 - Kraska, Martin A1 - Bertram, A. T1 - Simulation of texture development by the Representative-Volume-Element-Technique T2 - Euromech Colloquium 394 : [on "Theory and Numerics of Anisotropic Materials at Finite Strains", March 29 - 31st 1999 at the Technical University of Graz] Y1 - 1999 ER - TY - THES A1 - Kraska, Martin T1 - Textursimulation bei großen inelastischen Verformungen mit der Technik des repräsentativen Volumenelements (RVE) Y1 - 1998 SN - 3-9805993-7-X PB - Pro Business CY - Berlin ER - TY - CHAP A1 - Doing, M. A1 - Kaupper, M. A1 - Kraska, Martin A1 - Eßer, G. A1 - Roll, K. A1 - Merklein, M. A1 - Keßler, L. ED - Kolleck, Ralf T1 - Inverse identification of kinematic hardening parameters with Bending tests T2 - Tools and technologies for the processing of ultra high strength steels : IDDRG conference proceedings, 50th anniversary conference, 2010 May 31 - June 02, Graz, Austria Y1 - 2010 SN - 978-3-85125-108-1 SP - 555 EP - 564 PB - Verl. der Techn. Univ. CY - Graz ER - TY - JOUR A1 - Schenk, T. A1 - Kraska, Martin A1 - Richardson, I. M. T1 - Onderzoek nieuws uit Delft. De invloed van opspannen modelleren JF - Lastechniek Y1 - 2010 SN - 0023-8694 SP - 42 EP - 45 ER - TY - CHAP A1 - Schenk, T. A1 - Richardson, I. M. A1 - Esser, G. A1 - Kraska, Martin A1 - Ohnimus, S. ED - Vollertsen, Frank T1 - Welding distortion of DP600 overlap joints and influence of clamping and phase transformation T2 - Thermal forming and welding distortion : proceedings of the IWOTE'08 / International Workshop on Thermal Forming and Welding Distortion, Bremen, Germany, April 22 - 23, 2008 Y1 - 2008 SN - 978-3-933762-23-8 SP - 83 EP - 95 PB - BIAS CY - Bremen ER - TY - JOUR A1 - Schenk, T. A1 - Richardson, I. M. A1 - Kraska, Martin A1 - Ohnimus, S. T1 - Non-isothermal thermomechanical metallurgical model and its application to welding simulations JF - Science and technology of welding and joining Y1 - 2009 U6 - https://doi.org/10.1179/136217108X386563 SN - 1362-1718 (online) SN - 1743-2936 (print) VL - 14 IS - 2 SP - 152 EP - 160 ER - TY - JOUR A1 - Schenk, T. A1 - Richardson, I. M. A1 - Kraska, Martin A1 - Ohnimus, S. T1 - Influence of clamping on distortion of welded S355 T-joints JF - Science and technology of welding and joining Y1 - 2009 U6 - https://doi.org/10.1179/136217109X412418 SN - 1743-2936 (print) SN - 1362-1718 (online) VL - 14 IS - 4 SP - 369 EP - 375 ER - TY - JOUR A1 - Schenk, T. A1 - Richardson, I. M. A1 - Kraska, Martin A1 - Ohnimus, S. T1 - Modeling buckling distortion of DP600 overlap joints due to gas metal arc welding and the influence of the mesh density JF - Computational materials science Y1 - 2009 U6 - https://doi.org/10.1016/j.commatsci.2009.05.003 SN - 0927-0256 VL - 46 IS - 4 SP - 977 EP - 986 ER - TY - JOUR A1 - Schenk, T. A1 - Richardson, I. M. A1 - Kraska, Martin A1 - Ohnimus, S. T1 - A study on the influence of clamping on welding distortion JF - Computational materials science Y1 - 2009 U6 - https://doi.org/10.1016/j.commatsci.2009.01.004 SN - 0927-0256 VL - 45 IS - 4 SP - 999 EP - 1005 ER - TY - CHAP A1 - Schenk, T. A1 - Tikhomirov, D. A1 - Kraska, Martin A1 - Richardson, I. M. ED - Cerjak, Horst-Hannes T1 - Simplified Models for Welding Simulations with Controlled Accuracy T2 - Mathematical modelling of weld phenomena 9 : [... papers presented at the 9th International Seminar "Numerical Analysis of Weldability", which was held from September 28 to 30, 2009 at Schloss Seggau near Graz, Austria] Y1 - 2009 SN - 978-3-85125-127-2 SP - 523 EP - 550 PB - Verl. der Techn. Univ. CY - Graz ER - TY - JOUR A1 - Schenk, T. A1 - Richardson, I. M. A1 - Eßer, G. A1 - Kraska, Martin T1 - Influence of the Hardening Model on the Predicted Welding Distortion of DP600 Lap Joints JF - Materials science forum Y1 - 2010 SN - 0255-5476 VL - 638-642 SP - 3710 EP - 3715 PB - Trans Tech Publ. CY - Zürich-Stafa ER - TY - CHAP A1 - Hönl, F. A1 - Kraska, Martin A1 - Rathmann, J. A1 - Kühner, P. T1 - Induktive Puls-Thermografie in Reflexionsanordnung T2 - Thermographie-Kolloquium 2013 : 26. - 27. September 2013, Leinfelden-Echterdingen Y1 - 2013 ER - TY - GEN A1 - Kraska, Martin T1 - Universalberechnungssoftware SMath Studio für technische Berechnungen im Studiengang Maschinenbau & Virtuelle Mechanik-Experimente Y1 - 2014 ER - TY - CHAP A1 - Kraska, Martin A1 - Jakobi, L. T1 - Computer aided course of mechanics of materials T2 - 7th International Materials Education Symposium (Cambridge, April 9-10 2015) Y1 - 2015 N1 - Poster ER - TY - CHAP A1 - Kraska, Martin T1 - Transferangebote zum Leichtbau aus Forschung und Lehre an der Fachhochschule Brandenburg T2 - Metalldialog Ostbrandenburg in Eisenhüttenstadt – "Metall trifft Leichtbau“, 17.09.2015 Y1 - 2015 ER - TY - CHAP A1 - Kraska, Martin T1 - Model Sail Car Project Based Learning for Second Year Students of Mechanical Engineering T2 - Didaktik - Forum THB, 5.10.2016 Y1 - 2016 UR - https://www.th-brandenburg.de/fileadmin/fhb/tibs/Dateien_Froehlich/5-Kraska_Model-Sail-Car.pdf ER - TY - CHAP A1 - Bertram, A. A1 - Kraska, Martin ED - Bruhns, Otto T1 - Zur Anwendung der materiellen Isomorphie in der finiten Platizität T2 - Grosse plastische Formänderungen : Bad Honnef 1994 , [19. - 23. September ..., Seminar Große Plastische Formänderungen] Y1 - 1994 SP - 51 EP - 54 PB - Inst. für mechanik CY - Bochum ER - TY - CHAP A1 - Bertram, A. A1 - Kraska, Martin ED - Parker, David F. T1 - Description of finite plastic deformations in single crystals by material isomorphisms T2 - IUTAM Symposium on Anisotropy, Inhomogeneity and Nonlinearity in Solid Mechanics : Proceedings of the IUTAM-ISIMM Symposium held in Nottingham, U.K., 30 August – 3 September 1994 Y1 - 1994 SN - 978-90-481-4589-8 (print) SN - 978-94-015-8494-4 (online) U6 - https://doi.org/10.1007/978-94-015-8494-4_11 N1 - Online-Ausg.: Symposium on Anisotropy, Inhomogeneity and Nonlinearity in Solid Mechanics (1994 : Nottingham): IUTAM Symposium on Anisotropy, Inhomogeneity and Nonlinearity in Solid Mechanics SP - 77 EP - 90 PB - Springer ; Kluwer Acad. Publ. CY - Dordrecht [u.a] ER - TY - JOUR A1 - Bertram, A. A1 - Kraska, Martin T1 - Determination of finite plasic deformations in single crystals JF - Archives of mechanics Y1 - 1995 SN - 0373-2029 VL - 47 IS - 2 SP - 203 EP - 222 CY - Warszawa ER - TY - CHAP A1 - Kraska, Martin A1 - Duderstadt, F. A1 - Bertram, A. T1 - Repräsentatives Volumenelement mit periodischen Randbedingungen auf FE-Basis zur Simulation des Verhaltens von Vielkristallen T2 - Numerische Methoden der Plastomechanik : [5.] Workshop ; Neustadt a. Rbge., 28. - 30. Juni 1995 Y1 - 1995 SP - 115 EP - 124 CY - Hannover ER - TY - JOUR A1 - Kraska, Martin A1 - Bertram, M. T1 - Simulation of polycrystals using FEM-based representative volume element JF - Technische Mechanik Y1 - 1996 SN - 0232-3869 (print) SN - 2199-9244 (online) VL - 16 IS - 1 SP - 51 EP - 62 ER - TY - JOUR A1 - Bertram, A. A1 - Böhlke, Th. A1 - Kraska, Martin T1 - Numerical simulation of deformation induced anisotropy of polycrystals JF - Computational Materials Science Y1 - 1997 U6 - https://doi.org/doi:10.1016/S0927-0256(97)00071-2 SN - 0927-0256 (print) VL - 9 IS - 1/2 SP - 158 EP - 167 ER - TY - CHAP A1 - Bertram, A. A1 - Böhlke, T. A1 - Kraska, Martin ED - Owen, David R. J. T1 - Numerical simulation of texture development of polycrystals undergoing large plastic deformation T2 - Computational plasticity : fundamentals and applications; proceedings of the Fifth International Conference on Computational Plasticity, held in Barcelona, Spain, 17th - 20th March 1997. - Teil 1 Y1 - 1997 SN - 84-87867-87-1 SP - 895 EP - 900 PB - Internat. Center for Numerical Methods in Engineering (CIMNE) CY - Barcelona ER - TY - JOUR A1 - Bertram, A. A1 - Böhlke, T. A1 - Kraska, Martin T1 - Deformation induced anisotropy of polycrystals JF - Zeitschrift für angewandte Mathematik und Mechanik : ZAMM = Journal of applied mathematics and mechanics Y1 - 1997 SN - 1521-4001 (online) SN - 0946-8463, 0044-2267 (print) N1 - Online-Ausg.: ZAMM VL - 77 IS - S1 SP - S33 EP - S34 ER - TY - JOUR A1 - Bertram, A. A1 - Kraska, Martin T1 - Beschreibung finiter plastischer Deformationen von Einkristallen mittels materieller Isomorphismen JF - Zeitschrift für angewandte Mathematik und Mechanik : ZAMM Y1 - 1995 SN - 0946-8463, 0044-2267 VL - 75 SP - S179 EP - S180 ER - TY - GEN A1 - Kraska, Martin T1 - Strukturberechnung mit Finiten Elementen bai CargoLifter Y1 - 2000 ER - TY - GEN A1 - Kraska, Martin T1 - Ein Luftschiff-Gesamtmodell für Lastberechnung am CL 160 Y1 - 2001 ER - TY - GEN A1 - Kraska, Martin T1 - Structural Modeling of the CL 160 Airship Y1 - 2001 ER - TY - CHAP A1 - Kraska, Martin T1 - Aspects of the Finite Element Whole Airship Model at CargoLifter T2 - 14th Lighter-Than-Air Technical Committee convention & exhibition : July 15 - 19, 2001, Akron, Ohio Y1 - 2001 PB - AIAA CY - [Reston, Va.] ER - TY - CHAP A1 - Kraska, Martin T1 - ABAQUS-Gesamtmodell für die Lastenrechnung am CargoLifter CL 160 P1 T2 - Tagungsband / 13. deutschsprachiges ABAQUS Anwendertreffen : 24. - 25. September 2001 in Freiburg, Breisgau Y1 - 2001 PB - ABACOM Software GmbH CY - Aachen ER - TY - GEN A1 - Kraska, Martin T1 - Ballonkran-Entwicklung: Berechnung und Versuch Y1 - 2006 ER - TY - GEN A1 - Kraska, Martin T1 - Identifikation der kinematischen Verfestigung für die Tiefziehsimulation T2 - 5. Humboldt-Seminar, Arbeitskreis Stoffgesetze, 21./22. November 2003, Martin-Luther-Universität Halle-Wittenberg, Halle Y1 - 2003 ER - TY - GEN A1 - Kraska, Martin A1 - Geilfuß, A. T1 - Untersuchungen zum Warmumformprozeß megahochfester Stähle T2 - 1. Europäische Fachkonferenz "Warmumformung und Gußtechnologien für den Automobilleichtbau", Bad nauheim, 27./28. November 2003 Y1 - 2003 ER - TY - GEN A1 - Kraska, Martin T1 - Werkstofflehre im Bereich Maschinenbau - Beispiel der Technischen Hochschule Brandenburg Y1 - 2016 ER - TY - GEN A1 - Kraska, Martin A1 - Mckeprang, Jürgen T1 - Seilgeführter Auftriebskörper BT - Patent Y1 - 2003 ER - TY - GEN A1 - Kraska, Martin T1 - Verfahren und Vorrichtung zur Ermittlung des Widerstandes von Blechen gegen Biegung mit wechselnder Belastungsrichtung BT - Europäisches Patent Y1 - 2006 ER - TY - GEN A1 - Berg, Martina A1 - Kraska, Martin A1 - Niedergesäss, Ulf T1 - Verfahren zur Sicherung der Schweißqualität von Schweißpunkten beim Widerstandspunktschweißen einer bestimmten Materialkombination BT - Patent Y1 - 2009 ER - TY - GEN A1 - Kraska, Martin T1 - Schweißzange BT - Patent Y1 - 2008 ER -