TY - CHAP A1 - Goecke, Sven-Frithjof A1 - Bergmann, J. P. A1 - Witte, K.-H. T1 - Die Effizienzfabrik - Schwerpunkte und Analysemöglichkeiten aus Sicht der Schweißtechnik zur ressourceneffizienten Fertigung T2 - In: DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vorträge der Veranstaltungen in Saarbrücken am 17. und 18. September 2012 / Veranst.: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren Y1 - 2012 SN - 978-3-87155-593-0 N1 - Gehört zu: Deutscher Verband für Schweißen und Verwandte Verfahren: DVS-Berichte ; Bd. 286 SP - 263 EP - 264 PB - DVS-Media CY - Düsseldorf ER - TY - RPRT A1 - Goecke, Sven-Frithjof A1 - Krautwald, Anno T1 - [ENERWELD] : effiziente thermische Fügeverfahren KW - Fügen Y1 - 2014 SN - 978-3-940326-00-3 N1 - Schriftenreihe: Ressourceneffizienz in der Produktion Förderkennzeichen BMBF 02PO2120 - 02PO2129 - Verbund-Nr. 01074363 CY - Brandenburg ER - TY - CHAP A1 - Ebert-Spiegel, M. A1 - Goecke, Sven-Frithjof A1 - Rethmeier, M. T1 - Adaptive Regelung ermöglicht Fügespaltkompensation beim MAG-Schweißen T2 - DVS Congress 2013 : Große Schweißtechnische Tagung, DVS-Studentenkongress, 4. DVS-Forum Schulung und Prüfung ; Vorträge der Veranstaltungen in Essen vom 16. bis 21. September 2013 Y1 - 2013 SN - 978-3-87155-614-2 SP - 121 EP - 126 PB - DVS Media CY - Düsseldorf ER - TY - JOUR A1 - Ebert-Spiegel, M. A1 - Goecke, Sven-Frithjof A1 - Rethmeier, M. T1 - Efficient gap filling in MAG welding using optical sensors JF - Welding in the World Y1 - 2014 U6 - https://doi.org/10.1007/s40194-014-0145-8 SN - 0043-2288 (print) SN - 1878-6669 (online) VL - 58 IS - 5 SP - 637 EP - 647 ER - TY - CHAP A1 - Goecke, Sven-Frithjof T1 - Visualisation and Control of the Heat Input in MAG Welding of Ultra-High-Strength Manganese-Boron Steels T2 - Visual-JW 2014, November 26−28th, Proceedings of the International Symposium on Visualization in Joining & Welding Science through Advanced Measurements and Simulation, 28−30 November, Joining and Welding Research Institute − JWRI, Osaka University 2014, Osaka, Japan, (2014); JWP-15 Y1 - 2014 SP - 35 EP - 36 ER - TY - CHAP A1 - Möller, F. A1 - Kügler, H. A1 - Kötschau, S. A1 - Geier, A. A1 - Goecke, Sven-Frithjof T1 - Gap Bridging Ability in Laser GMA Hybrid Welding of Thin 22MnB5 Sheets T2 - Physics Procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014 Y1 - 2014 U6 - https://doi.org/doi:10.1016/j.phpro.2014.08.052 SN - 1875-3892 ; 1875-3884 VL - 56 SP - 620 EP - 629 ER - TY - CHAP A1 - Müller, A. A1 - Goecke, Sven-Frithjof T1 - Investigation on laser beam oscillation for fi llet welds in lap joints T2 - JOM-17 : Seventeenth International Conference on Joining of Materials ; Helsingør, Denmark, Konventum Lo Skolen, 5 - 8 May 2013 Y1 - 2013 ER - TY - JOUR A1 - Müller, A. A1 - Goecke, Sven-Frithjof A1 - Albert, F. A1 - Sievi, P. A1 - Baum, S. T1 - Nahtgeführtes Laserstrahl-Remoteschweißen mit örtlicher Strahloszillation JF - Schweißen und Schneiden Y1 - 2013 SN - 0036-7184 VL - 65 IS - 9 SP - 631 EP - 635 ER - TY - JOUR A1 - Müller, A. A1 - Goecke, Sven-Frithjof A1 - Rethmeier, M. T1 - Laser beam oscillation for fillet welding JF - Welding in the World Y1 - 2014 U6 - https://doi.org/10.1007/s40194-014-0165-4 SN - 1878-6669 (online) SN - 0043-2288 (print) VL - 58 IS - 6 SP - 865 EP - 872 ER - TY - CHAP A1 - Möller, F. A1 - Mittelstädt, C. A1 - Kötschau, S. A1 - Thomy, C. A1 - Goecke, Sven-Frithjof A1 - Vollertsen, F. T1 - Effect of process parameters on joint properties in laser GMA hybrid welding of thin-sheet fillet welds on 22MnB5 T2 - IIW 2013 Annual Assembly Com. XVII, Essen (2013) IIW-Doc. XII-2129- 13; IV- 1138-13 (online) Y1 - 2013 ER - TY - CHAP A1 - Ebert-Spiegel, Michael A1 - Goecke, Sven-Frithjof T1 - Adaptive Regelung ermöglicht Fügespaltkompensation beim MAG-Schweißen T2 - 15. Nachwuchswissenschaftlerkonferenz : Tagungsband Y1 - 2014 UR - https://www.hs-magdeburg.de/fileadmin/user_upload/Einrichtungen/Pressestelle/files/nwk-15/Tagungsband-NWK15.pdf SN - 978-3-935831-58-1 SP - 185 EP - 191 ER - TY - GEN A1 - Ebert-Spiegel, M. A1 - Goecke, Sven-Frithjof A1 - Rethmeier, M. T1 - Possibilities for compensating a higher heat input, in particular by the torch off set relative to the top sheet at the fillet weld on a lap joint Y1 - 2014 ER - TY - GEN A1 - Ebert-Spiegel, M. A1 - Goecke, Sven-Frithjof A1 - Rethmeier, M. T1 - Efficient gap filling in MAG welding using optical sensors Y1 - 2013 ER - TY - GEN A1 - Müller, A. A1 - Goecke, Sven-Frithjof A1 - Rethmeier, M. T1 - Laser beam oscillation for fillet welding Y1 - 2013 ER - TY - GEN A1 - Müller, A. A1 - Goecke, Sven-Frithjof A1 - Rethmeier, M. T1 - Laser beam oscillation welding for automotive applications Y1 - 2014 ER - TY - JOUR A1 - Kügler, H. A1 - Möller, F. A1 - Kötschau, S. A1 - Geier, A. A1 - Goecke, Sven-Frithjof T1 - Bridgeability of increasing gap in laser GMA hybrid welding of 22MnB5 JF - IIW Annual Assembly 2014 Com. XII. Seoul/Korea (2014) IIW - Doc. XII - 2169 - 14 (online) Y1 - 2014 ER - TY - JOUR A1 - Gao, X. S. A1 - Wu, C. S. A1 - Goecke, Sven-Frithjof A1 - Kügler, H. T1 - Numerical simulation of temperature field, fluid flow and weld bead formation in oscillating single mode laser-GMA hybrid welding JF - Journal of Materials Processing Technology Y1 - 2017 U6 - https://doi.org/10.1016/j.jmatprotec.2016.11.028 SN - 0924-0136 VL - 242 SP - 147 EP - 159 ER - TY - JOUR A1 - Socher, Rolf A1 - Beck, Eberhard A1 - Schrader, Thomas A1 - Löwe, Katharina A1 - Kindsmüller, Martin Christof A1 - Syrjakow, Michael A1 - Vielhauer, Claus A1 - Liefold, Marius A1 - Hasche, Eberhard A1 - Götze, Thomas A1 - Goecke, Sven-Frithjof A1 - Hirsch, Sören A1 - Hoier, Bernhard A1 - Kraska, Martin A1 - Malessa, Reiner A1 - Möllmann, Klaus-Peter A1 - Pinno, Frank A1 - Mieke, Christian A1 - Vollmer, Michael A1 - Burger-Menzel, Bettina A1 - Frosch, Katharina A1 - Johannsen, Andreas A1 - Meiser, Vera G. A1 - Scheeg, Jochen A1 - Schwill, Jürgen A1 - Höding, Michael A1 - Lüthy, Anja A1 - Stokar von Neuforn, Daniela A1 - Wilms, Andreas A1 - Edel, Karl-Otto A1 - Pusch, Gerhard A1 - Parsch, Stefan A1 - Höft, Uwe A1 - Loose, Harald A1 - Tetzlaff, Laura A1 - Orlowski, Katja A1 - Kell, Gerald T1 - Forschungsbericht der Technischen Hochschule Brandenburg 2015-2016 N2 - Mit den Forschungsberichten bietet die Technische Hochschule Brandenburg einen regelmäßigen Überblick zu den Forschungsthemen und -projekten der Hochschule. T2 - Research Report of the Brandenburg University of Applied Sciences T3 - Forschungsbericht der Technischen Hochschule Brandenburg - 2015/2016 Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus4-19510 SN - 1861-3462 PB - Technische Hochschule Brandenburg CY - Brandenburg an der Havel ET - Berichtszeitraum: WS 2014/15; SS 2016 ER - TY - CHAP A1 - Goecke, Sven-Frithjof A1 - Kügler, H. A1 - Baum, S. A1 - Vollertsen, F. T1 - Gap Bridging in Laser-GMA-Hybrid Welding of Boron Manganese UHSS T2 - Proceedings of the The International Symposium on Visualization in Joining & Welding Science through Advanced Measurements and Simulation, Visual-JW2016, October 17−18, 2016, Hotel Hankyu Expo Park, Osaka, Japan Y1 - 2016 ER - TY - RPRT A1 - Kügler, Helge A1 - Möller, Felix A1 - Vollertsen, Frank A1 - Goecke, Sven-Frithjof A1 - Baum, Sebastian T1 - Laser-MSG Hybridschweißen von Stahlfeinblechen BT - IGF-Nr. 17585 BG T2 - Hybrid laser-GMA welding of thin steel sheets KW - Stahlblech KW - Feinblech KW - Metallschutzgasschweißen KW - Laserschweißen KW - Faserlaser KW - Einmodenlaser Y1 - 2015 SN - 978-3-942541-85-5 PB - Verlag und Vertriebsgesellschaft mbH CY - Düsseldorf ER - TY - JOUR A1 - Kügler, Helge A1 - Möller, Felix A1 - Goecke, Sven-Frithjof A1 - Vollertsen, Frank T1 - Dauerfestigkeit hybridgeschweißter Überlappnähte des Stahls 22MnB5 JF - Materials Testing Y1 - 2016 U6 - https://doi.org/https://doi.org/10.3139/120.110880 SN - 2195-8572 (Online) N1 - also in: Proc. of the IIW Annual Assembly 2015 Com. XII, Helsinki, Finnland (2015) IIW Doc. XII-2247-15 (online) VL - 58 IS - 6 SP - 569 EP - 574 ER - TY - RPRT A1 - Kügler, H. A1 - Möller, F. A1 - Goecke, Sven-Frithjof A1 - Vollertsen, F. T1 - Thermisches Fügen höchstfester Stähle T2 - Schweissen und Schneiden Y1 - 2015 SN - 0036-7184 VL - 67 IS - 12 SP - 744 ER - TY - CHAP A1 - Kügler, H. A1 - Möller, F. A1 - Kötschau, S. A1 - Goecke, Sven-Frithjof A1 - Vollertsen, F. T1 - Laser-MSG-Hybridschweißen von pressgehärteten Feinblechen mit reduziertem Wärmeeintrag T2 - Große Schweißtechnische Tagung ; DVS-Studentenkongress u.a. Vorträge der Veranstaltungen im Rahmen von DVS Congress und DVS Expo in Nürnberg vom 15. bis 17. September 2015. Veranst.: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V., Düsseldorf Y1 - 2015 SN - 978-3-945023-46-4 SP - 55 EP - 59 PB - DVS Media CY - Düsseldorf ER - TY - CHAP A1 - Goecke, Sven-Frithjof A1 - Ebert-Spiegel, Michael T1 - Towards a More Robust Automated MAG Welding T2 - 2015 IEEE International Conference on Automation Science and Engineering (CASE) : 24 - 28 Aug. 2015, Gothenburg, Sweden Y1 - 2015 U6 - https://doi.org/10.1109/coase.2015.7294114 SP - 417 EP - 418 PB - IEEE CY - Piscataway, NJ ER - TY - JOUR A1 - Das, Ashish A1 - Shome, Mahadev A1 - Goecke, Sven-Frithjof A1 - De, Amitava A1 - Das, C. R. T1 - Joining of galvannealed steel and aluminium alloy using controlled short circuiting gas metal arc welding process JF - Science and Technology of Welding & Joining Y1 - 2015 U6 - https://doi.org/10.1179/1362171815y.0000000032 VL - 20 IS - 5 SP - 402 EP - 408 ER - TY - JOUR A1 - Ebert-Spiegel, Michael A1 - Goecke, Sven-Frithjof A1 - Rethmeier, Michael T1 - Possibilities for compensating a higher heat input, in particular by the torch offset relative to the top sheet at the fillet weld on a lap joint JF - Welding in the World Y1 - 2015 U6 - https://doi.org/10.1007/s40194-015-0220-9 VL - 59 IS - 3 SP - 443 EP - 453 ER - TY - JOUR A1 - Goecke, Sven-Frithjof A1 - Syed, Arshad Alam A1 - Ebert-Spiegel, Michael A1 - De, Amitava T1 - Probing current, voltage and metal transfer characteristics in pulsed arc and in conventional and a novel low energy input short arc GMAW JF - Quarterly Journal of the Japan Welding Society Y1 - 2013 U6 - https://doi.org/10.2207/qjjws.31.26s VL - 31 IS - 4 SP - 26s EP - 30s ER - TY - JOUR A1 - Makwana, Pinaac A1 - Shome, Mahadev A1 - Goecke, Sven-Frithjof A1 - De, Amitava T1 - Fast responsive control of current and voltage waveforms for gas metal arc brazing of thin zinc-coated steel sheets JF - Journal of Materials Processing Technology Y1 - 2018 U6 - https://doi.org/10.1016/j.jmatprotec.2017.11.028 VL - 254 SP - 171 EP - 178 ER - TY - JOUR A1 - Makwana, Pinaac A1 - Shome, Mahadev A1 - Goecke, Sven-Frithjof A1 - De, Amitava T1 - Wetting length in gas metal arc brazing of galvanised steel JF - Science and Technology of Welding & Joining Y1 - 2017 U6 - https://doi.org/10.1080/13621718.2016.1207289 VL - 22 IS - 2 SP - 1 EP - 4 ER - TY - JOUR A1 - Makwana, Pinaac A1 - Shome, Mahadev A1 - Goecke, Sven-Frithjof A1 - De, Amitava T1 - Gas metal arc brazing of galvannealed steel sheets JF - Science and Technology of Welding & Joining Y1 - 2016 U6 - https://doi.org/10.1080/13621718.2016.1145420 VL - 21 IS - 7 SP - 1 EP - 7 ER - TY - JOUR A1 - Müller, Alexander A1 - Goecke, Sven-Frithjof A1 - Rethmeier, Michael T1 - Laser beam oscillation welding for automotive applications JF - Welding in the World Y1 - 2018 U6 - https://doi.org/10.1007/s40194-018-0625-3 VL - 62 IS - 5 SP - 1039 EP - 1047 ER - TY - JOUR A1 - Gao, X. S. A1 - Wu, Chuang-Song A1 - Goecke, Sven-Frithjof T1 - Numerical analysis of heat transfer and fluid flow characteristics and their influence on bead defects formation in oscillating laser-GMA hybrid welding of lap joints JF - The International Journal of Advanced Manufacturing Technology Y1 - 2018 U6 - https://doi.org/10.1007/s00170-018-2293-2 VL - 98 IS - 1-4 SP - 523 EP - 537 ER - TY - JOUR A1 - Chen, Shujun A1 - Zhang, Ruiying A1 - Jiang, Fan A1 - Goecke, Sven-Frithjof T1 - A novel method for testing the electrical property of arc column in plasma arc welding JF - Welding in the World Y1 - 2018 U6 - https://doi.org/10.1007/s40194-018-0561-2 VL - 62 IS - 3 SP - 637 EP - 645 ER - TY - JOUR A1 - Gao, X. S. A1 - Wu, Chuan-Song A1 - Goecke, Sven-Frithjof A1 - Kuegler, H. T1 - Effects of process parameters on weld bead defects in oscillating laser-GMA hybrid welding of lap joints JF - The International Journal of Advanced Manufacturing Technology Y1 - 2017 U6 - https://doi.org/10.1007/s00170-017-0637-y VL - 93 IS - 5-8 SP - 1877 EP - 1892 ER - TY - JOUR A1 - Das, Ashish A1 - Shome, Mahadev A1 - Goecke, Sven-Frithjof A1 - De, Amitava T1 - Joining of aluminium alloy and galvanized steel using a controlled gas metal arc process JF - Journal of Manufacturing Processes Y1 - 2017 U6 - https://doi.org/10.1016/j.jmapro.2017.04.006 VL - 27 SP - 179 EP - 187 ER - TY - JOUR A1 - Goecke, Sven-Frithjof A1 - Kügler, Helga A1 - Möller, Felix A1 - Vollertsen, Frank T1 - Dauerfestigkeit hybridgeschweißter Überlappnähte des Stahls 22MnB5 JF - Materials Testing Y1 - 2016 U6 - https://doi.org/10.3139/120.110880 VL - 58 IS - 6 SP - 569 EP - 574 ER - TY - JOUR A1 - Goecke, Sven-Frithjof A1 - Shome, M. A1 - Das, A. A1 - De, A. T1 - Numerical modelling of gas metal arc joining of aluminium alloy and galvanised steels in lap joint configuration JF - Science and Technology of Welding & Joining Y1 - 2016 U6 - https://doi.org/10.1080/13621718.2015.1104206 VL - 21 IS - 4 SP - 303 EP - 309 ER - TY - JOUR A1 - Goecke, Sven-Frithjof A1 - Müller, Alexander A1 - Sievi, Pravin A1 - Albert, Florian A1 - Rethmeier, Michael T1 - Laser Beam Oscillation Strategies for Fillet Welds in Lap Joints JF - Physics Procedia Y1 - 2014 U6 - https://doi.org/10.1016/j.phpro.2014.08.149 VL - 56 SP - 458 EP - 466 ER - TY - GEN A1 - Das, Atanu A1 - Chaurasia, Prashtan Kumar A1 - Mandal, Gopi K. A1 - Goecke, Sven-Frithjof A1 - De, Amitava T1 - Sample calculations to estimate joint distortion based on the published article "Analytical Estimation of Thermomechanical Distortion and Interface Layer Thickness for Gas Metal Arc Lap Joining of Dissimilar Sheets" N2 - A sample set of calculations is presented in this supplemental document to analytically estimate joint distortion for gas metal arc lap joining of aluminum and steel thin sheets following the published article "Analytical Estimation of Thermomechanical Distortion and Interface Layer Thickness for Gas Metal Arc Lap Joining of Dissimilar Sheets" Y1 - 2023 ER - TY - JOUR A1 - Das, Atanu A1 - Chaurasia, Prashtan Kumar A1 - Mandal, Gopi K. A1 - Goecke, Sven-Frithjof A1 - De, Amitava T1 - Analytical estimation of thermomechanical distortion and interface layer thickness for gas metal arc lap joining of dissimilar sheets JF - Welding in the World Y1 - 2023 U6 - https://doi.org/10.1007/s40194-01426-x SN - 432288 IS - 76/2023 SP - 33 EP - 49 PB - Springer Link ER - TY - JOUR A1 - Chaurasia, Prashtan Kumar A1 - Goecke, Sven-Frithjof A1 - De, Amitava T1 - Monitoring melt pool asymmetry in gas metal arc-directed energy deposition JF - Science and Technology of Welding and Joining Y1 - 2023 U6 - https://doi.org/10.1080/13621718.2023.2168933 SN - 1362-1718 (PRINT) IS - Augabe 5/ Band 28 SP - 424 EP - 432 PB - Taylor and Fracis ER - TY - CHAP A1 - Goecke, Sven-Frithjof A1 - Seefeld, T. A1 - Tyralla, Dieter A1 - Krug, A. T1 - Monitoring and Control of the Heat Input in MAG-Laser-Hybrid Welding of High Strength Steel in Telescopic Crane Booms T2 - Konferenz: IEEE International Conference on Automation Science and Engineering (CASE), 2019/ Titel: 2019 IEEE 15th International Conference on Automation Science and Engineering (CASE): August 22-26, 2019, Vancouver, BC, Canada Y1 - 2019 SN - 978-1-72810-355-6 U6 - https://doi.org/10.1109/COASE.2019.8843219 PB - IEEE CY - Piscataway, New Jersey ER - TY - RPRT A1 - Goecke, Sven-Frithjof A1 - Müller, Alexander A1 - Ebert-Spiegel, Michael T1 - ECOWELD - Energiegeregeltes Metallschutzgas- und Laserschweißen : "Ingenieurnachwuchs" 2011 (Maschinenbau) : Ausschreibung der Förderlinie "Qualifizierung von Ingenieurnachwuchs an Fachhochschulen" 2011 im Rahmen des Programms "Forschung an Fachhochschulen" : Schlussbericht : Laufzeit des Vorhabens von: 01.08.2011 bis: 31.03.2015 Y1 - 2015 U6 - https://doi.org/10.2314/GBV:867121742 ER - TY - JOUR A1 - Chaurasia, Prashtan Kumar A1 - Goecke, Sven-Frithjof A1 - De, Amitava T1 - Real-time monitoring of temperature field, metal transfer and cooling rate during gas metal arc-directed energy deposition JF - Science and Technology of Welding and Joining Y1 - 2022 U6 - https://doi.org/10.1080/13621718.2022.2080447 SN - 13621718 IS - 27 SP - 512 EP - 521 PB - Taylor & Francis ER - TY - JOUR A1 - Goecke, Sven-Frithjof A1 - Makwana, Pinaac A1 - Shome, Mahadev A1 - De, Amitava T1 - Probing joint strength and distortion in gas metal arc lap joining of aluminum and steel sheets JF - Welding in the World Y1 - 2019 U6 - https://doi.org/10.1007/s40194-018-0653-z VL - 63 IS - 2 SP - 229 EP - 236 PB - Springer ER - TY - JOUR A1 - Makwana, Pinaac A1 - Goecke, Sven-Frithjof A1 - De, Amitava T1 - Real-time heat input monitoring towards robust GMA brazing JF - Science and Technology of Welding & Joining Y1 - 2019 U6 - https://doi.org/10.1080/13621718.2018.1470290 VL - 24 IS - 1 SP - 1 EP - 11 PB - Taylor & Francis ER - TY - JOUR A1 - Das, Atanu A1 - Goecke, Sven-Frithjof A1 - De, Amitava T1 - Joining of aluminium alloy and galvanized steel sheets multimaterial assembly using a gas metal arc based process JF - Tecnologia em Matalurgia, Materiais e Mineração Y1 - 2021 U6 - https://doi.org/10.4322/2176-1523.20212464 SN - 2176-1515 (PRINT) 2176-1523 (ONLINE) N1 - Band: 18 PB - ABM - Associação Brasileira de Metalurgia, Materiais e Mineração ER -