TY - CHAP A1 - Wilden, J. A1 - Bergmann, J. P. A1 - Dolles, M. A1 - Reich, S. A1 - Fernandet, S. A1 - Goecke, Sven-Frithjof T1 - Low temperature brazing of zinc coated steel and steel/aluminium joints by setting ZnAl-alloys as brazing material T2 - In: Brazing and soldering : proceedings of the 3rd International Brazing and Soldering Conference, April 24 - 26, 2006, Crowne Plaza Riverwalk Hotel, San Antonio, Texas, USA / sponsored by ASM International, the Materials Information Society; AWS, [American Welding Society]. Ed. by John J. Stephens ... - Materials Park, Ohio: ASM Internat., 2006. - ISBN 0-87170-838-8 Y1 - 2006 SP - 32 EP - 39 ER - TY - CHAP A1 - Goecke, Sven-Frithjof A1 - Dorn, L. T1 - MAG-ChopArc-Schweißen für Feinblech größer gleich 0,2 mm T2 - In: Schweißen und Schneiden 2000 : Vorträge der gleichnamigen Großen Schweißtechnischen Tagung in Nürnberg vom 27. bis 29. September 2000 / Veranst.: DVS, Deutscher Verband für Schweißen und Verwandte Verfahren e.V.. - Als Ms. gedr. - Düsseldorf : Verl. für Schweißen und Verwandte Verfahren, DVS-Verl., 2000. - (DVS-Berichte ; 209). - ISBN 3-87155-667-X Y1 - 2000 SP - 163 EP - 168 ER - TY - CHAP A1 - Dorn, L. A1 - Goecke, Sven-Frithjof T1 - Influence of least active gas additions on pulsed current MIG-welding of aluminium T2 - In: Proceedings of the International Conference on the Joining of Materials JOM-8 : May 12 - 14, 1997, Helsingør, Denmark ; [optimization of joining technology for the industrial application, case study and repair welding, advanced welding technologies and developments] / ed. by the European Institute for the Joining of Materials. - Helsingør : JOM-Inst., 1997. - ISBN 87-89582-04-7 Y1 - 1997 SP - 100 EP - 105 ER - TY - JOUR A1 - Rose, Sascha A1 - Zähr, Julia A1 - Schnick, Michael A1 - Füssel, Uwe A1 - Goecke, Sven-Frithjof A1 - Hübner, Mark T1 - Arc attachments on aluminium during tungsten electrode positive polarity in TIG welding of aluminium JF - In: Welding in the World 55 (2011) 9-10, pp 91-99 N2 - In modem AC power sources, both balance and current of EP (tungsten electrode positive) and EN (tungsten electrode negative) can be readily adjusted. According to conventional assumptions the surface of aluminium workpieces is cleaned during EP but the tungsten electrode is more heated due to electron work function. During EN the tungsten electrode cools down and the workpiece is melted. Therefore, optimal settings of the power source mostly aim for maximal penetration and minimal electrode wear. This paper presents a study of arc attachments in TIG welding on aluminium. Two different arc attachments to the cathodic workpiece could be attested with only one of them actually cleaning the surface. The first one is a spot mode (highly dynamic) that attaches to the edges of oxide layers and cracks them. The second one is also a spot mode, but it attaches to weld pools. It does not clean the surface but heats the base material intensively. Both arc attachment modes compete against each other. As a result, the cleaning area narrows with wider weld pools due to an increasing attachment to the weld pool during EP. The influences on the arc attachment to the aluminium cathode as well as the contradictions in present literature are discussed. Possible adjustments of the AC balance for optimized processes are proposed. Y1 - 2011 U6 - https://doi.org/10.1007/bf03321325 SN - 1878-6669 VL - 55 IS - 9-10 SP - 91 EP - 99 ER - TY - JOUR A1 - Wilden, J. A1 - Jahn, S. A1 - Melahin, N. A1 - Rehfeldt, L. A1 - Luhn, T. A1 - Goecke, Sven-Frithjof A1 - Schmid, E. A1 - Berger, U. T1 - Brazing as the key to resource-efficient and energy-efficient joining in the product life cycle JF - In: Welding and cutting (2010) 5, 301-312 Y1 - 2010 SN - 1612-3433 SP - 301 EP - 312 ER - TY - JOUR A1 - Wilden, J. A1 - Jahn, S. A1 - Milahin, N. A1 - Luhn, T. A1 - Rehfeldt, L. A1 - Goecke, Sven-Frithjof A1 - Schmid, E. A1 - Berger, U. T1 - Perspektiven und Visionen zum Schweissen moderner Stahlwerkstoffe JF - In: Stahl und Eisen 130 (2010) 10, S. 71-75 Y1 - 2010 SN - 0340-4803 SP - 71 EP - 75 ER - TY - JOUR A1 - Ghosh, P. K. A1 - Dorn, L. A1 - Goecke, Sven-Frithjof T1 - Universality of correlationships among pulse parameters for different MIG Welding Power Sources JF - In: The international journal for the joining of materials : JOM 13 (2001), 40-47 Y1 - 2001 SN - 0905-6866 SP - 40 EP - 47 ER - TY - JOUR A1 - Bergmann, J. P. A1 - Wilden, J. A1 - Reich, S. A1 - Goecke, Sven-Frithjof T1 - Methods and solutions for joining plates made from different metals using voltaic arc welding JF - In: Welding International 23 (2009) 12, pp 895-903 N2 - For some years now, the light engineering sector has been in search of welding and/or joining technologies allowing high-speed processing at low temperatures. This way, damage to galvanized coating, for example in the case of steels, could be avoided or significantly reduced. Damage to the galvanized coating represents an outwardly visible phenomenon that can have a negative impact on the component's corrosion resistance. On the other hand, from the metallurgical viewpoint, controlling heat input represents an important way to solve the problems associated with heat joining of metals with incomplete solid-state solubility. The formation of fragile intermetallic phases during cooling, for example, occurs with aluminium/steel or aluminium/titanium. The process and the correct choice of filler materials are key points for the success of the joining method. In the case of the combination of aluminium and steel, zinc represents a suitable filler material, for example for brazing. The melting temperature is around 420°C and the wettability, with regard to galvanized steel, is favoured by the zinc layer, while on the aluminium part, it is possible to avoid the use of flux, thanks to the activating action of the voltaic arc. However, the low melting and vaporization temperatures of zinc make even ‘short arc’ processing rather difficult. Only new developments in electrical sources for welding, and in particular new processes, offer the possibility of reducing the heat input by modifying the ‘short arc’ process. The difficulties described are also valid for the combination of titanium and aluminium, and are associated with the formation of phases such as Ti x A1 y . Again in this case, this paper will present a strategy for joining sheets less than 2 mm thick. In the past years, an increasing number of strategies to join zinc-coated steels can be observed. Brazing represents a profitable way to join zinc-coated steels at low temperatures, reducing or avoiding zinc evaporation. In order to completely avoid damaging zinc coating, the set of ZnAl-fìllers was already investigated for laser brazing of zinc-coated steels as well as for joining steel with aluminium. Furthermore, thanks to new developments in arc wire technology, ZnAl-electrodes can be used for MIG-brazing as well. In this case, the conventional short arc, which normally does not allow brazing with zinc wires as eruption-like evaporation occurs, is modified and controlled. The drop formation on the wire tip, the metal transfer, and the heat input can be controlled and modified very precisely, so that processing of filler material can be performed easily for thin sheets (till 0.8–1.5 mm) and at low-processing speed, below 0.3–0.4 m/min. The control of the heat input occurs due to abruptly reducing the current after short arc. The disadvantages connected with a lower heat input in the base material are a restricted wetting behaviour of the zinc pool on the base material and the low-brazing speed due to a very high cooling rate. The focus of the presented investigation is the development of strategies, in order to enhance process conditions for brazing sheets of zinc-coated steels and aluminium. Y1 - 2009 U6 - https://doi.org/10.1080/09507110902843289 SN - 0950-7116 SP - 895 EP - 903 ER - TY - CHAP A1 - Goecke, Sven-Frithjof A1 - Wilden, J. A1 - Jahn, S. A1 - Reich, S. A1 - Fedtke, A. A1 - Vollertsen, F. A1 - Thomy, C. T1 - Technologiekette zum Produzieren, Reparieren und Recyceln von Produkten in Material-Mix-Bauweise - PROREMIX T2 - In: Die Verbindungs-Spezialisten 2008 : Vorträge und Posterbeiträge der Veranstaltung in Dresden vom 17. bis 19. September 2008 / Veranst.: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V., Düsseldorf. - Düsseldorf : Verl. für Schweißen und Verwandte Verfahren, DVS-Verl., 2008. - (DVS-Berichte ; 250). - ISBN 978-3-87155-256-4 Y1 - 2008 SP - 375 EP - 378 ER - TY - CHAP A1 - Wilden, J. A1 - Bergmann, J. P. A1 - Reich, S. A1 - Neuwöhner, P. A1 - Goecke, Sven-Frithjof T1 - Grundlegende Untersuchungen zum flussmittelfreien Löten von Leichtmetall-Material-Mix Konstruktionen T1 - Basic investigations about the flux-free soldering of multi-material-mix lightweight constructions T2 - In: Hart- und Hochtemperaturlöten und Diffusionsschweißen : Vorträge und Posterbeiträge des 8. internationalen Kolloquiums in Aachen vom 19. bis 21. Juni 2007. - Düsseldorf : DVS-Verl., 2007. - (DVS-Berichte ; 243). - ISBN 978-3-87155-799-6 Y1 - 2007 SP - 176 EP - 182 ER - TY - THES A1 - Goecke, Sven-Frithjof T1 - Auswirkungen von Aktivgaszumischungen im vpm-Bereich zu Argon auf das MIG-Impulsschweißen von Aluminium T1 - Effects of active gas admixtures in the vpm range to argon on pulsed MIG welding of aluminium N2 - Die Auswirkungen von Stickstoff, Sauerstoff und Wasserstoffzumischungen im vpm-Bereich zu Argon auf das MIG-Impulsschweißen von Aluminium werden mittels mechanisch-technologischer Untersuchungen, der Hochgeschwindigkeitskinematografie und der Emissions-Spektroskopie ermittelt. Stickstoff- und Sauerstoffzumischungen bewirken bereits unter 0,1 % eine erhebliche Erhöhung des Einbrands und eine Verringerung der Mikroporosität gegenüber Reinargon, während durch Wasserstoffzumischung bis etwa 0,1 % die Mikroporosität kaum beeinflusst wird. Aufgrund einer Erhöhung der Lichtbogenstabilität verbessert sich die Prozesssicherheit durch geringe molekulare Aktivgaszumischungen im Al-Dünnblechbereich. Metalldampf im Kernbereich des MSG-Lichtbogens führt mit einer ausgeprägten Strömung in Richtung Schmelzbad zu einer Kühlung des Plasmas. Dabei erhöht Stickstoff- und Sauerstoffzumischung den Metalldampfpartialdruck im Lichtbogenplasma und kontrahiert den Metalldampfstrahl. Verstärkte Elektronenemission an der Kathodenoberfläche durch hocherhitzte Metalloxide bzw. –nitride verbessert die elektrische Leitfähigkeit begleitet von einer Erhöhung des Plasma-Ionisierungsgrads. N2 - Effects of nitrogen, oxygen and hydrogen admixtures in the vpm range to argon on pulsed MIG welding of aluminium are studied by mechanical-technological investigations, high speed film and emission spectroscopy. Nitrogen and oxygen admixtures of even below 0.1 % cause an considerable increase of penetration and decrease of porosity compared to argon, while hydrogen barely effects porosity up to 0.1 %. In the aluminium thin sheet range the process stability is enhanced by admixing small amounts of molecular active gases due to an arc stability increase. A cooling of the plasma is caused by a metal vapour flow in the centre of the MIG arc column. The partial metal vapour pressure in the arc plasma will be increased by nitrogen and oxygen admixtures and the metal vapour jet contracts. An increased electron emission from the cathode surface improves the electrical conductance followed be an increase of the plasma ionisation rate. KW - MIG; Schweißen; Gas; Aluminium; Magnesium; Spektroskopie; Plasma; Lichtbogen; Metalldampf Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:83-opus-7178 ER - TY - JOUR A1 - Wilden, Johannes A1 - Jahn, Simon A1 - Melahin, Natalie A1 - Rehfeldt, Lars A1 - Luhn, Thomas A1 - Goecke, Sven-Frithjof A1 - Schmid, Eberhard A1 - Berger, Uwe T1 - Löten als Schlüssel zum ressourcen- und energieeffizienten Fügen im Produktlebenszyklus JF - In: Schweissen und Schneiden 62 (2010) 5, 264-277 N2 - Der Einsatz von Lötverfahren zum Fügen reduziert gegenüber der Schweißtechnik die Prozesstemperaturen und ermöglicht sowohl die Realisierung anspruchsvoller Mischverbindungen als auch das Fügen verzinkter Stähle mit minimaler Zinkschichtverletzung. Aktuelle Entwicklungen von Lotwerkstoffen zielen sowohl in Richtung Absenkung der Schmelztemperaturen als auch in Richtung Festigkeitssteigerung, um die Anwendungsmöglichkeiten noch weiter zu vervielfältigen. Dabei unterliegen sowohl Eisenbasislegierungen als auch Systeme auf Kupfer- oder Zinkbasis einer stetigen Weiterentwicklung. Die bereits heute erreichbaren Festigkeiten reichen bis etwa 900 MPa (CuAl8Mn13Ni2Fe2) bei Kupferbasislegierungen und 410 MPa (AnAl7,5Cu2,5 + 180 ppm Mg) bei Zinklegierungen. Neben der Energieeinsparung durch die reduzierten Prozesstemperaturen beim Fügen und der Möglichkeit Hybridstrukturen herzustellen, ergeben sich außerdem Vorteile bei der Reparatur und dem Recycling von Bauteilen. Da der Zusatzwerkstoff unabhängig vom Grundwerkstoff wiederaufgeschmolzen werden kann, sind eine leichtere Reparatur und auch ein Trennen der Bauteile zum Recycling möglich. Dies führt bei Betrachtung des gesamten Produktlebenszyklus zu einer höheren Energieeffizienz und einer Schonung der natürlichen Rohstoffe und Ressourcen. Durch die steigenden Energie- und Werkstoffkosten und den damit verbundenen Kostendruck rückt dieser Aspekt neben der Machbarkeit und Produktivität langsam, aber sicher ins Blickfeld der Unternehmen. Kostenvorteile ergeben sich außerdem durch Betrachtung und Modifikation ganzer Fertigungsketten. Niedrigschmelzende Zusatzwerkstoffe ermöglichen beispielsweise das Fügen verzinkter Halbzeuge ohne Zinkschichtverletzung. Da Halbzeuge in großen Mengen kostengünstiger verzinkt werden können als fertige Konstruktionen, ist das Fügen verzinkter Halbzeuge insgesamt günstiger als das Verzinken geschweißter Stahlkonstruktionen. Y1 - 2010 SP - 264 EP - 277 ER - TY - CHAP A1 - Goecke, Sven-Frithjof T1 - Energiereduziertes Lichtbogen-Fügeverfahren für wärmeempfindliche Werkstoffe T2 - In: Schweißen und Schneiden 2005 : Vorträge der gleichnamigen Großen Schweißtechnischen Tagung in Essen vom 12. bis 14. September 2005 / Veranst.: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V., Düsseldorf . - Düsseldorf : Verl. für Schweißen und Verwandte Verfahren, DVS-Verl., 2005. - (Deutscher Verband für Schweißen und Verwandte Verfahren: DVS-Berichte ; Bd. 237). - ISBN 3-87155-695-5 Y1 - 2005 SP - 44 EP - 48 ER - TY - CHAP A1 - Goecke, Sven-Frithjof A1 - Bergmann, J. P. A1 - Witte, K.-H. T1 - Steigerung der Ressourceneffizienz des MSG-Schweißens T2 - In: DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vorträge der Veranstaltungen in Saarbrücken am 17. und 18. September 2012 / Veranst.: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren. - Düsseldorf : DVS Media, 2012. - (DVS-Berichte / DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V., ISSN 0418-9639 ; 286). - ISBN 3-87155-593-2, 978-3-87155-593-0 Y1 - 2012 SP - 263 EP - 264 ER - TY - CHAP A1 - Goecke, Sven-Frithjof A1 - Hübner, M. A1 - Penning, O. A1 - Höcker, F. A1 - Suchodoll, D. T1 - Steigerung der Ressourceneffizienz des MSG-Schweissens T2 - In: DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vorträge der Veranstaltungen in Saarbrücken am 17. und 18. September 2012 / Veranst.: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren. - Düsseldorf : DVS Media, 2012. - (DVS-Berichte / DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V., ISSN 0418-9639 ; 286). - ISBN 3-87155-593-2, 978-3-87155-593-0 Y1 - 2012 SP - 265 EP - 268 ER - TY - CHAP A1 - Wilden, J. A1 - Jahn, S. A1 - Sabelfeld, N. A1 - Rehfeldt, L. A1 - Luhn, T. A1 - Goecke, Sven-Frithjof A1 - Schmid, E. A1 - Berger, U. T1 - Löten als Schlüssel zum ressourcen - und energieeffizienten Fügen im Produktlebenszyklus T1 - Soldering as a key to resource- and energy-efficient adding in the product life cycle T2 - In: Hart- und Hochtemperaturlöten und Diffusionsschweißen : LÖT 2010; Vorträge und Posterbeiträge des 9. internationalen Kolloquiums in Aachen vom 15. bis 17. Juni 2010 = Brazing, high temperature brazing and diffusion bonding / Gemeinschaftsveranstaltung von DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V., Düsseldorf ... - Düsseldorf : DVS Media, 2010. - (DVS-Berichte ; 263) - ISBN 978-3-87155-589-3 ; 3-87155-589-4 Y1 - 2010 SP - 159 EP - 163 ER - TY - CHAP A1 - Goecke, Sven-Frithjof A1 - Schmaranzer, C. T1 - ColdArc-Schweissen von hoch festen martensitischen Warmbändern für den europäischen Nutzfahrzeugmarkt T2 - In: Die Verbindungs Spezialisten 2009 : Große Schweißtechnische Tagung ; Forschungsforum, Industrieforum, Studentenkongress, Handwerkerforum ; Vorträge der Veranstaltung in Essen vom 14. bis 19. September 2009 / Veranst.: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V. - Düsseldorf : DVS Media, 2009. - (DVS-Berichte / DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V., ISSN 0418-9639 ; 258). - ISBN 978-3-87155-584-8 Y1 - 2009 SP - 129 EP - 132 ER - TY - CHAP A1 - Wilden, Johannes A1 - Jahn, Simon A1 - Reich, Sebastian A1 - Dal-Canton, Sebastian A1 - Goecke, Sven-Frithjof T1 - Controlled short arc technology - A new method for processing heat sensitive materials T2 - In: Future trends in steel development, processing technologies and applications : bringing the automotive, supplier and steel industries together / SCT 2008. Ed. by Bernhard Fuchsbauer und Hans-Joachim Wieland. [Organizer: Steel Institute VDEh, Düsseldorf, Germany]. - Düsseldorf : Verl. Stahleisen, 2008. - ISBN 978-3-514-00755-0 Y1 - 2008 SP - 368 EP - 375 ER - TY - CHAP A1 - Wilden, J. A1 - Bergmann, J. P. A1 - Reich, S. A1 - Neuwöhner, P. A1 - Goecke, Sven-Frithjof T1 - Basic investigations about the flux-free soldering of multi-material-mix lightweight constructions T1 - Grundlegende Untersuchungen zum flussmittelfreien Löten von Leichtmetall-Material-Mix Konstruktionen T2 - In: Hart- und Hochtemperaturlöten und Diffusionsschweißen : Vorträge und Posterbeiträge des 8. Internationalen Kolloquiums in Aachen vom 19. bis 21. Juni 2007. - Als Ms. gedr. - Düsseldorf : DVS-Verl., 2007. - (DVS-Berichte ; 243). - ISBN 978-3-87155-799-6 Y1 - 2007 SP - 176 EP - 182 ER - TY - CHAP A1 - Wilden, J. A1 - Jahn, S. A1 - Reich, S. A1 - Goecke, Sven-Frithjof T1 - Technologien zum flussmittelfreien Fügen von Leichtmetall-Material-Mix- Konstruktionen T2 - In: Schweißtechnik und Fügetechnik - Schlüsseltechnologien der Zukunft = Welding and joining - key technologies for the future / 10. Internationales Aachener Schweißtechnik-Kolloquium, 24. - 25.10.2007. Hrsg.: Uwe Reisgen. Red. Bearb.: Konrad Willms ; Nikolaus Wagner. [Veranst. ISF Aachen ...]. - Aachen : Shaker, 2007. - (Aachener Berichte Fügetechnik ; 2007,1). - 3-8322-6644-5, 978-3-8322-6644-8 Y1 - 2007 SP - 491 EP - 500 ER - TY - CHAP A1 - Goecke, Sven-Frithjof A1 - Kruscha, J. T1 - Theorie und Praxis des Elektrodenaufschmelzverhaltens und des Werkstoffübergangs im Kurzlichtbogenbereich T2 - In: Die Verbindungs-Spezialisten : Kurzfassungen und Vorträge der gleichnamigen Tagungen in Basel vom 16. bis 18. September 2007 / Veranst.: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V., Düsseldorf. In Kooperation mit: Institut de Soudure, Villepinte (Frankreich) ... - Düsseldorf : Verl. für Schweißen und Verwandte Verfahren, DVS-Verl., 2007. - (Deutscher Verband für Schweißen und Verwandte Verfahren: DVS-Berichte ; Bd. 244). - ISBN 978-3-87155-250-2 Y1 - 2007 SP - 245 EP - 258 ER - TY - CHAP A1 - Wilden, J. A1 - Bergmann, J. P. A1 - Reich, S. A1 - Veron, F. A1 - Möller, L. A1 - Goecke, Sven-Frithjof T1 - Methoden und Strategien zum flussmittelfreien Fügen von Mischverbindungen durch Kombination der geregelten Lichtbogentechnik und der Lasertechnik T2 - In: Schweißen und Schneiden 2006 : Vorträge der gleichnamigen Großen Schweißtechnischen Tagung in Aachen vom 20. bis 22. September 2006 / Veranst.: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V., Düsseldorf. - Düsseldorf : Verl. für Schweißen und Verwandte Verfahren, DVS-Verl., 2006. - (Deutscher Verband für Schweißen und Verwandte Verfahren: DVS-Berichte ; Bd. 240). - ISBN 3-87155-699-8 ; 978-3-87155-699-9 Y1 - 2006 SP - 120 EP - 125 ER - TY - CHAP A1 - Dorn, L. A1 - Goecke, Sven-Frithjof T1 - Vorteile des wärmearmen ChopArc-Schweißens und -Lötens bei beschichteten und artverschiedenen Blechen für Leichtfahrzeuge T2 - In: Fügetechnik im Automobilbau : Vorträge ; 9. - 11. Mai 2001 in Berlin / Deutscher Verband für Materialforschung u. -prüfung e.V. - Berlin : DVM, 2001. - (Deutscher Verband für Materialforschung und -prüfung: Vorträge ; 2001) (Deutscher Verband für Materialforschung und -prüfung: DVM-Bericht ; 668) Y1 - 2001 SP - 93 EP - 108 ER - TY - CHAP A1 - Dorn, Lutz A1 - Goecke, Sven-Frithjof T1 - Choparc for superior MAG-welding of thin sheets with a thickness of less than 0,2 mm T2 - In: Proceedings of the International Conference on the Joining of Materials JOM-10 : May 11 - 14, 2001, Helsingør - Denmark / ed. by the Institute for the Joining of Materials . - Gilleleje, 2001. - ISBN 87-89582-097-1 Y1 - 2001 SP - 84 EP - 89 ER - TY - CHAP A1 - Dorn, D. A1 - Goecke, Sven-Frithjof T1 - Influence of very low percentage active gas components in argon on pulsed current welding T2 - In: 30th International Symposium on Automotive Technology and Automation, Florence, Italy, 16th - 19th June 1997 ; the largest European automotive forum with international participation ; [proceedings] / [ed. by: Dieter Roller] Teil: Materials for energy-efficient vehicles. Paint and powder coating applications in the automotive industries. - Croydon : Automotive Automation Ltd., 1997. - ISBN 0-947719-94-6 Y1 - 1997 SP - 221 EP - 228 ER - TY - CHAP A1 - Wilden, J. A1 - Jahn, S. A1 - Reich, S. A1 - Goecke, Sven-Frithjof T1 - Technologien zum flussmittelfreien Fügen von Leichtmetall-Material-Mix-Konstruktionen T1 - Methods for the flux-free joining of muiti-material-mix lightweight constructions T2 - In: Schweißtechnik und Fügetechnik - Schlüsseltechnologien der Zukunft = Welding and joining - key technologies for the future / 10. Internationales Aachener Schweißtechnik-Kolloquium, 24. - 25.10.2007. Hrsg.: Uwe Reisgen. Red. Bearb.: Konrad Willms ; Nikolaus Wagner. [Veranst. ISF Aachen ...]. - Aachen : Shaker, 2007. - ISBN 978-3-8322-6644-8 ; 3-8322-6644-5 Y1 - 2007 SP - 491 EP - 502 ER - TY - CHAP A1 - Goecke, Sven-Frithjof A1 - Bergmann, J. P. A1 - Witte, K.-H. T1 - Die Effizienzfabrik - Schwerpunkte und Analysemöglichkeiten aus Sicht der Schweißtechnik zur ressourceneffizienten Fertigung T2 - In: DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vorträge der Veranstaltungen in Saarbrücken am 17. und 18. September 2012 / Veranst.: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren Y1 - 2012 SN - 978-3-87155-593-0 N1 - Gehört zu: Deutscher Verband für Schweißen und Verwandte Verfahren: DVS-Berichte ; Bd. 286 SP - 263 EP - 264 PB - DVS-Media CY - Düsseldorf ER - TY - RPRT A1 - Goecke, Sven-Frithjof A1 - Krautwald, Anno T1 - [ENERWELD] : effiziente thermische Fügeverfahren KW - Fügen Y1 - 2014 SN - 978-3-940326-00-3 N1 - Schriftenreihe: Ressourceneffizienz in der Produktion Förderkennzeichen BMBF 02PO2120 - 02PO2129 - Verbund-Nr. 01074363 CY - Brandenburg ER - TY - CHAP A1 - Ebert-Spiegel, M. A1 - Goecke, Sven-Frithjof A1 - Rethmeier, M. T1 - Adaptive Regelung ermöglicht Fügespaltkompensation beim MAG-Schweißen T2 - DVS Congress 2013 : Große Schweißtechnische Tagung, DVS-Studentenkongress, 4. DVS-Forum Schulung und Prüfung ; Vorträge der Veranstaltungen in Essen vom 16. bis 21. September 2013 Y1 - 2013 SN - 978-3-87155-614-2 SP - 121 EP - 126 PB - DVS Media CY - Düsseldorf ER - TY - JOUR A1 - Ebert-Spiegel, M. A1 - Goecke, Sven-Frithjof A1 - Rethmeier, M. T1 - Efficient gap filling in MAG welding using optical sensors JF - Welding in the World Y1 - 2014 U6 - https://doi.org/10.1007/s40194-014-0145-8 SN - 0043-2288 (print) SN - 1878-6669 (online) VL - 58 IS - 5 SP - 637 EP - 647 ER - TY - CHAP A1 - Goecke, Sven-Frithjof T1 - Visualisation and Control of the Heat Input in MAG Welding of Ultra-High-Strength Manganese-Boron Steels T2 - Visual-JW 2014, November 26−28th, Proceedings of the International Symposium on Visualization in Joining & Welding Science through Advanced Measurements and Simulation, 28−30 November, Joining and Welding Research Institute − JWRI, Osaka University 2014, Osaka, Japan, (2014); JWP-15 Y1 - 2014 SP - 35 EP - 36 ER - TY - CHAP A1 - Möller, F. A1 - Kügler, H. A1 - Kötschau, S. A1 - Geier, A. A1 - Goecke, Sven-Frithjof T1 - Gap Bridging Ability in Laser GMA Hybrid Welding of Thin 22MnB5 Sheets T2 - Physics Procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014 Y1 - 2014 U6 - https://doi.org/doi:10.1016/j.phpro.2014.08.052 SN - 1875-3892 ; 1875-3884 VL - 56 SP - 620 EP - 629 ER - TY - CHAP A1 - Müller, A. A1 - Goecke, Sven-Frithjof T1 - Investigation on laser beam oscillation for fi llet welds in lap joints T2 - JOM-17 : Seventeenth International Conference on Joining of Materials ; Helsingør, Denmark, Konventum Lo Skolen, 5 - 8 May 2013 Y1 - 2013 ER - TY - JOUR A1 - Müller, A. A1 - Goecke, Sven-Frithjof A1 - Albert, F. A1 - Sievi, P. A1 - Baum, S. T1 - Nahtgeführtes Laserstrahl-Remoteschweißen mit örtlicher Strahloszillation JF - Schweißen und Schneiden Y1 - 2013 SN - 0036-7184 VL - 65 IS - 9 SP - 631 EP - 635 ER - TY - JOUR A1 - Müller, A. A1 - Goecke, Sven-Frithjof A1 - Rethmeier, M. T1 - Laser beam oscillation for fillet welding JF - Welding in the World Y1 - 2014 U6 - https://doi.org/10.1007/s40194-014-0165-4 SN - 1878-6669 (online) SN - 0043-2288 (print) VL - 58 IS - 6 SP - 865 EP - 872 ER - TY - CHAP A1 - Möller, F. A1 - Mittelstädt, C. A1 - Kötschau, S. A1 - Thomy, C. A1 - Goecke, Sven-Frithjof A1 - Vollertsen, F. T1 - Effect of process parameters on joint properties in laser GMA hybrid welding of thin-sheet fillet welds on 22MnB5 T2 - IIW 2013 Annual Assembly Com. XVII, Essen (2013) IIW-Doc. XII-2129- 13; IV- 1138-13 (online) Y1 - 2013 ER - TY - CHAP A1 - Ebert-Spiegel, Michael A1 - Goecke, Sven-Frithjof T1 - Adaptive Regelung ermöglicht Fügespaltkompensation beim MAG-Schweißen T2 - 15. Nachwuchswissenschaftlerkonferenz : Tagungsband Y1 - 2014 UR - https://www.hs-magdeburg.de/fileadmin/user_upload/Einrichtungen/Pressestelle/files/nwk-15/Tagungsband-NWK15.pdf SN - 978-3-935831-58-1 SP - 185 EP - 191 ER - TY - GEN A1 - Ebert-Spiegel, M. A1 - Goecke, Sven-Frithjof A1 - Rethmeier, M. T1 - Possibilities for compensating a higher heat input, in particular by the torch off set relative to the top sheet at the fillet weld on a lap joint Y1 - 2014 ER - TY - GEN A1 - Ebert-Spiegel, M. A1 - Goecke, Sven-Frithjof A1 - Rethmeier, M. T1 - Efficient gap filling in MAG welding using optical sensors Y1 - 2013 ER - TY - GEN A1 - Müller, A. A1 - Goecke, Sven-Frithjof A1 - Rethmeier, M. T1 - Laser beam oscillation for fillet welding Y1 - 2013 ER - TY - GEN A1 - Müller, A. A1 - Goecke, Sven-Frithjof A1 - Rethmeier, M. T1 - Laser beam oscillation welding for automotive applications Y1 - 2014 ER - TY - JOUR A1 - Kügler, H. A1 - Möller, F. A1 - Kötschau, S. A1 - Geier, A. A1 - Goecke, Sven-Frithjof T1 - Bridgeability of increasing gap in laser GMA hybrid welding of 22MnB5 JF - IIW Annual Assembly 2014 Com. XII. Seoul/Korea (2014) IIW - Doc. XII - 2169 - 14 (online) Y1 - 2014 ER - TY - JOUR A1 - Gao, X. S. A1 - Wu, C. S. A1 - Goecke, Sven-Frithjof A1 - Kügler, H. T1 - Numerical simulation of temperature field, fluid flow and weld bead formation in oscillating single mode laser-GMA hybrid welding JF - Journal of Materials Processing Technology Y1 - 2017 U6 - https://doi.org/10.1016/j.jmatprotec.2016.11.028 SN - 0924-0136 VL - 242 SP - 147 EP - 159 ER - TY - JOUR A1 - Socher, Rolf A1 - Beck, Eberhard A1 - Schrader, Thomas A1 - Löwe, Katharina A1 - Kindsmüller, Martin Christof A1 - Syrjakow, Michael A1 - Vielhauer, Claus A1 - Liefold, Marius A1 - Hasche, Eberhard A1 - Götze, Thomas A1 - Goecke, Sven-Frithjof A1 - Hirsch, Sören A1 - Hoier, Bernhard A1 - Kraska, Martin A1 - Malessa, Reiner A1 - Möllmann, Klaus-Peter A1 - Pinno, Frank A1 - Mieke, Christian A1 - Vollmer, Michael A1 - Burger-Menzel, Bettina A1 - Frosch, Katharina A1 - Johannsen, Andreas A1 - Meiser, Vera G. A1 - Scheeg, Jochen A1 - Schwill, Jürgen A1 - Höding, Michael A1 - Lüthy, Anja A1 - Stokar von Neuforn, Daniela A1 - Wilms, Andreas A1 - Edel, Karl-Otto A1 - Pusch, Gerhard A1 - Parsch, Stefan A1 - Höft, Uwe A1 - Loose, Harald A1 - Tetzlaff, Laura A1 - Orlowski, Katja A1 - Kell, Gerald T1 - Forschungsbericht der Technischen Hochschule Brandenburg 2015-2016 N2 - Mit den Forschungsberichten bietet die Technische Hochschule Brandenburg einen regelmäßigen Überblick zu den Forschungsthemen und -projekten der Hochschule. T2 - Research Report of the Brandenburg University of Applied Sciences T3 - Forschungsbericht der Technischen Hochschule Brandenburg - 2015/2016 Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:522-opus4-19510 SN - 1861-3462 PB - Technische Hochschule Brandenburg CY - Brandenburg an der Havel ET - Berichtszeitraum: WS 2014/15; SS 2016 ER - TY - CHAP A1 - Goecke, Sven-Frithjof A1 - Kügler, H. A1 - Baum, S. A1 - Vollertsen, F. T1 - Gap Bridging in Laser-GMA-Hybrid Welding of Boron Manganese UHSS T2 - Proceedings of the The International Symposium on Visualization in Joining & Welding Science through Advanced Measurements and Simulation, Visual-JW2016, October 17−18, 2016, Hotel Hankyu Expo Park, Osaka, Japan Y1 - 2016 ER - TY - RPRT A1 - Kügler, Helge A1 - Möller, Felix A1 - Vollertsen, Frank A1 - Goecke, Sven-Frithjof A1 - Baum, Sebastian T1 - Laser-MSG Hybridschweißen von Stahlfeinblechen BT - IGF-Nr. 17585 BG T2 - Hybrid laser-GMA welding of thin steel sheets KW - Stahlblech KW - Feinblech KW - Metallschutzgasschweißen KW - Laserschweißen KW - Faserlaser KW - Einmodenlaser Y1 - 2015 SN - 978-3-942541-85-5 PB - Verlag und Vertriebsgesellschaft mbH CY - Düsseldorf ER - TY - JOUR A1 - Kügler, Helge A1 - Möller, Felix A1 - Goecke, Sven-Frithjof A1 - Vollertsen, Frank T1 - Dauerfestigkeit hybridgeschweißter Überlappnähte des Stahls 22MnB5 JF - Materials Testing Y1 - 2016 U6 - https://doi.org/https://doi.org/10.3139/120.110880 SN - 2195-8572 (Online) N1 - also in: Proc. of the IIW Annual Assembly 2015 Com. XII, Helsinki, Finnland (2015) IIW Doc. XII-2247-15 (online) VL - 58 IS - 6 SP - 569 EP - 574 ER - TY - RPRT A1 - Kügler, H. A1 - Möller, F. A1 - Goecke, Sven-Frithjof A1 - Vollertsen, F. T1 - Thermisches Fügen höchstfester Stähle T2 - Schweissen und Schneiden Y1 - 2015 SN - 0036-7184 VL - 67 IS - 12 SP - 744 ER - TY - CHAP A1 - Kügler, H. A1 - Möller, F. A1 - Kötschau, S. A1 - Goecke, Sven-Frithjof A1 - Vollertsen, F. T1 - Laser-MSG-Hybridschweißen von pressgehärteten Feinblechen mit reduziertem Wärmeeintrag T2 - Große Schweißtechnische Tagung ; DVS-Studentenkongress u.a. Vorträge der Veranstaltungen im Rahmen von DVS Congress und DVS Expo in Nürnberg vom 15. bis 17. September 2015. Veranst.: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V., Düsseldorf Y1 - 2015 SN - 978-3-945023-46-4 SP - 55 EP - 59 PB - DVS Media CY - Düsseldorf ER - TY - CHAP A1 - Goecke, Sven-Frithjof A1 - Ebert-Spiegel, Michael T1 - Towards a More Robust Automated MAG Welding T2 - 2015 IEEE International Conference on Automation Science and Engineering (CASE) : 24 - 28 Aug. 2015, Gothenburg, Sweden Y1 - 2015 U6 - https://doi.org/10.1109/coase.2015.7294114 SP - 417 EP - 418 PB - IEEE CY - Piscataway, NJ ER -