@article{MaurerEifertAnnan2023, author = {Maurer, Robert and Eifert, Felix Friedrich and Annan, Tarek}, title = {Remote Work in Kooperationsprojekten - Fluch oder Segen?!}, series = {Mittelstand-Digital Magazin - Wissenschaft trifft Praxis}, journal = {Mittelstand-Digital Magazin - Wissenschaft trifft Praxis}, number = {19/9}, publisher = {Begleitforschung Mittelstand-Digital WIK GmbH}, issn = {2198-8544}, pages = {15 -- 20}, year = {2023}, abstract = {Der vorliegende Beitrag befasst sich mit den Herausforderungen, die im Rahmen von Remote Work in Kooperationen bez{\"u}glich der Informations- und IT-Sicherheit bestehen, insbesondere im Hinblick auf den sicheren Datenaustausch. Des Weiteren wird die Wichtigkeit einer ganzheitlichen Sicht von IT-Governance-, Risiko- und Compliance-Management in Verb{\"u}nden kleiner und mittlerer Unternehmen (KMU) behandelt. Weiterhin wird aufgezeigt, was bei der informationstechnischen Absicherung von Kooperationen und IT-Konsortien beachtet werden sollte.}, language = {de} } @article{Uhl2023, author = {Uhl, Roland}, title = {Charakterisierung des Erwartungswertes am Graphen der Verteilungsfunktion}, publisher = {Technische Hochschule Brandenburg}, address = {Brandenburg an der Havel}, doi = {10.25933/opus4-2986}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:522-opus4-29862}, pages = {10}, year = {2023}, abstract = {Der Erwartungswert einer Zufallsgr{\"o}ße kann generell am Graphen ihrer Verteilungsfunktion durch eine naheliegende Gleichheit zweier Fl{\"a}cheninhalte festgelegt werden. {\"A}quivalent dazu l{\"a}sst er sich mit zwei uneigentlichen Riemann-Integralen darstellen. Davon ausgehend werden die Tschebyschow-Ungleichung und ihre Modifikation mit strikten Ungleichheitszeichen hergeleitet.}, subject = {Verteilungsfunktion}, language = {de} } @inproceedings{MaurerJohannsen2023, author = {Maurer, Robert and Johannsen, Andreas}, title = {Machine Learning Method Within the Context of a Socially Aware Solution for Vehicle Routing Problems}, series = {Konferenz: International Conference on Digital Society (ICDS), Porto, Portugal, 2022/ Konferenz-Band: ICDS 2022, The Sixteenth International Conference on Digital Society}, booktitle = {Konferenz: International Conference on Digital Society (ICDS), Porto, Portugal, 2022/ Konferenz-Band: ICDS 2022, The Sixteenth International Conference on Digital Society}, publisher = {IARIA}, pages = {1 -- 5}, year = {2023}, language = {en} } @incollection{SeyerleinKlugAdler2023, author = {Seyerlein-Klug, Annegrit and Adler, Rasmus}, title = {4.2.: Sicherheit}, series = {Deutsche Normungsroadmap K{\"u}nstliche Intelligenz}, booktitle = {Deutsche Normungsroadmap K{\"u}nstliche Intelligenz}, editor = {Wahlster, Wolfgang and Winterhalter, Christoph}, edition = {2}, publisher = {DKE - Deutsche Kommission Elektrotechnik Elektronik Informationstechnik in DIN und VDE}, address = {Berlin/Offenbach am Main}, pages = {105 -- 120}, year = {2023}, language = {de} } @misc{Monz2023, type = {Master Thesis}, author = {Monz, Johannes Stefan}, title = {Datenmodellinterne Revisionshistorie f{\"u}r nebenl{\"a}ufige Gesch{\"a}ftsprozesse am Fallbeispiel der Verwaltung von Studiengangscurricula}, doi = {10.25933/opus4-2938}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:522-opus4-29380}, school = {Technische Hochschule Brandenburg}, pages = {77}, year = {2023}, abstract = {Die Versionierung von Daten ist ein hochkomplexes Problem, das viele verschiedene Aspekte ber{\"u}cksichtigen muss. Daher ist in diesem Bereich bisher noch kein univer- sell anwendbarer Ansatz beschrieben worden. Verschiedene Autoren haben sich an einer L{\"o}sung versucht und Herangehensweisen f{\"u}r ihre eigenen Anwendungsf{\"a}lle entwickelt. In dieser Arbeit wird ein neuer Ansatz anhand eines Fallbeispiels vorgestellt. Der An- satz zielt darauf ab, Daten- und Versionierungsstrukturen in einem relationalen Da- tenmodell zu vereinigen und dabei eine einfache Integration von Gesch{\"a}ftsprozessen zu erm{\"o}glichen. Insbesondere wird darauf geachtet, dass die Erzwingung des korrekten Ablaufs von Gesch{\"a}ftsprozessen durch eine maschinelle Umsetzung derselben m{\"o}glich ist. Das Datenmodell beinhaltet eine vollst{\"a}ndige Versionierungshistorie in Form eines gerichteten zyklenlosen Graphen. Hiermit bietet es eine breit anwendbare L{\"o}sung zur Datenversionierung, die zudem gut in bestehende Abl{\"a}ufe und Datens{\"a}tze integrierbar ist. In dieser Arbeit wird das kombinierte Datenmodell vorgestellt und anhand von ge- nerischen Beispielen erl{\"a}utert. Zudem wird die Funktionalit{\"a}t des Ansatzes anhand des Fallbeispiels der Verwaltung der Studiengangscurricula des Fachbereichs Informatik und Medien der Technischen Hochschule Brandenburg belegt. Hierbei wird auch die Integra- tion von Gesch{\"a}ftsprozessen und die Nutzbarkeit in der tats{\"a}chlichen Datenverwaltung dargestellt.}, subject = {Datenverarbeitungssystem}, language = {de} } @masterthesis{Dalitz2023, type = {Bachelor Thesis}, author = {Dalitz, Franz}, title = {Implementierung eines Stacks zum Erzeugen, Verarbeiten und Visualisieren von Telemetriedaten f{\"u}r ein Microservice basiertes System}, address = {Brandenburg an der Havel}, doi = {10.25933/opus4-2941}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:522-opus4-29418}, school = {Technische Hochschule Brandenburg}, pages = {39}, year = {2023}, abstract = {Einsicht in die Abl{\"a}ufe und Leistung heutiger Software und verteilter Systeme zu erlangen, wird durch stetig steigende Komplexit{\"a}t zunehmend erschwert. Die Firma Peterson Technologies GmbH implementierte zur Linderung dieser Problematik ein internes Telemetriesystem. Ziel dieser Arbeit ist es, das System auf Wunsch der Firma durch ein neues zu ersetzen, um so die {\"U}berwachung zu verbessern und aktuellere Software zu verwenden. Nach einer Untersuchung des vorherigen Systems werden Priorit{\"a}ten festgelegt, welche die sp{\"a}tere Nutzung, Instandhaltung und Erweiterung des neuen Systems erleichtern sollen. Darauf folgen die Planung seiner Architektur, die Auswahl und Implementierung der Software und schließlich das Erzeugen einer einfachen Dokumentation. Der resultierende Telemetriestack ist funktionst{\"u}chtig und erf{\"u}llt die Vorstellungen der Firma. Dennoch weist er einige Probleme, wie beispielsweise eine hohe CPU Belastung auf, welche zusammen mit M{\"o}glichkeiten der Verbesserung und Erweiterung abschließend betrachtet werden.}, subject = {Telemetrie}, language = {de} } @book{Kraska2023, author = {Kraska, Martin}, title = {Technisches Rechnen mit SMath : Erste Schritte}, publisher = {Technische Hochschule Brandenburg}, address = {Brandenburg}, doi = {10.25933/opus4-2947}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:522-opus4-29479}, publisher = {Technische Hochschule Brandenburg}, pages = {37}, year = {2023}, subject = {SMath}, language = {de} } @book{Kraska2023, author = {Kraska, Martin}, title = {Technisches Rechnen mit SMath : Matrizen, Diagramme, Datenverarbeitung}, publisher = {Technische Hochschule Brandenburg}, address = {Brandenburg}, doi = {10.25933/opus4-2948}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:522-opus4-29486}, publisher = {Technische Hochschule Brandenburg}, pages = {65}, year = {2023}, subject = {SMath}, language = {de} } @book{Kraska2023, author = {Kraska, Martin}, title = {SMath with Maxima}, publisher = {Technische Hochschule Brandenburg}, address = {Brandenburg}, doi = {10.25933/opus4-2949}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:522-opus4-29497}, publisher = {Technische Hochschule Brandenburg}, pages = {87}, year = {2023}, subject = {SMath}, language = {en} } @masterthesis{Blauert2023, type = {Bachelor Thesis}, author = {Blauert, Derk-Janko}, title = {Bewertung des Potentials von Network Access Control (NAC) f{\"u}r die Netzwerksicherheit in modernen IT-Umgebungen mittels vergleichender Betrachtung der beiden Produkte PacketFence und macmon}, publisher = {Technische Hochschule Brandenburg}, address = {Brandenburg an der Havel}, doi = {10.25933/opus4-2951}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:522-opus4-29514}, school = {Technische Hochschule Brandenburg}, pages = {80}, year = {2023}, abstract = {In der heutigen digitalisierten Welt spielt die Sicherheit von IT-Infrastrukturen eine entscheidende Rolle. Diese Bachelorarbeit untersucht das Potenzial von Network Access Control (NAC) als eine IT-L{\"o}sung zur Verbesserung der Netzwerksicherheit in modernen IT-Umgebungen. Dabei steht die Zugriffskontrolle von Personen und Ger{\"a}ten im Vordergrund. Damit soll erreicht werden, dass unautorisierter Zugriff zum Netzwerk verhindert wird. Es werden die Begrifflichkeiten, Funktionsweise und potenzielle Angriffsvektoren von NAC untersucht. Des Weiteren werden die jeweiligen Funktionen der NAC-Produkte macmon und der Open-Source L{\"o}sung PacketFence gegen{\"u}bergestellt. Im praktischen Teil der Arbeit werden dann die vorgestellten Angriffsvektoren an einem Test-Netzwerk durchgef{\"u}hrt und analysiert. Die Arbeit zeigt, dass NAC eine wichtige Komponente in der Zugriffskontrolle f{\"u}r eine moderne IT-Infrastruktur ist. W{\"a}hrend einige Angriffe auf das Test-Netzwerk abgewehrt werden konnten, war es dennoch m{\"o}glich, sich als Angreifer am Netzwerk anzumelden. NAC ist ein unerl{\"a}ssliches Tool f{\"u}r gr{\"o}ßere IT-Infrastrukturen, jedoch erfordert eine korrekte Konfiguration und effektive Nutzung von NAC ein umfangreiches Wissen {\"u}ber die verschiedenen Aspekte und Themenbereiche der Netzwerksicherheit.}, subject = {Informationssicherheit}, language = {de} } @article{ChaurasiaGoeckeDe2023, author = {Chaurasia, Prashant Kumar and Goecke, Sven Frithjof and De, Amitava}, title = {Towards real-time monitoring of metal transfer and melt pool temperature field in gas metal arc directed energy deposition}, series = {Welding in the World}, journal = {Welding in the World}, number = {67}, publisher = {Springer Link}, doi = {https://doi.org/10.1007/s40194-023-01534-2}, pages = {1781 -- 1791}, year = {2023}, abstract = {Large three-dimensional metallic parts can be printed layer-by-layer using gas metal arc directed energy deposition (GMA-DED) process at a high deposition rate and with little or no material wastage. Fast responsive real-time monitoring of GMA-DED process signatures and their transient variations is required for printing of dimensionally accurate and structurally sound parts. A systematic experimental investigation is presented here on multi-layer GMA-DED with two different scanning strategies using a high strength low alloy (HSLA) filler wire. The dynamic metal transfer, melt pool temperature field and its longitudinal cross-section, and arc voltage and current are monitored synchronously. The transient arc heat input and the melt pool solidification cooling rate are estimated from the monitored signals. The layer-wise variations of the melt pool dimension, surface temperature profile, thermal cycles, and solidification cooling rate are examined for different scanning strategies. It is comprehended that the part defects can be minimized, and the mass production of zero-defect parts can be achieved in GMA-DED process with synchronized monitoring and assessment of the real-time process signatures.}, language = {en} } @article{RevinaAksu2023, author = {Revina, Aleksandra and Aksu, {\"U}nal}, title = {An approach for analyzing business process execution complexity based on textual data and event log}, series = {Information Systems}, journal = {Information Systems}, number = {114}, publisher = {Elsevier}, doi = {10.1016/j.is.2023.102184}, year = {2023}, abstract = {With the advent of digital transformation, organizations increasingly rely on various information systems to support their business processes (BPs). Recorded data, including textual data and event log, expand exponentially, complicating decision-making and posing new challenges for BP complexity analysis in Business Process Management (BPM). Herein, Process Mining (PM) serves to derive insights based on historic BP execution data, called event log. However, in PM, textual data is often neglected or limited to BP descriptions. Therefore, in this study, we propose a novel approach for analyzing BP execution complexity by combining textual data serving as an input at the BP start and event log. The approach is aimed at studying the connection between complexities obtained from these two data types. For textual data-based complexity, the approach employs a set of linguistic features. In our previous work, we have explored the design of linguistic features favorable for BP execution complexity prediction. Accordingly, we adapt and incorporate them into the proposed approach. Using these features, various machine learning techniques are applied to predict textual data-based complexity. Moreover, in this prediction, we show the adequacy of our linguistic features, which outperformed the linguistic features of a widely-used text analysis technique. To calculate event log-based complexity, the event log and relevant complexity metrics are used. Afterward, a correlation analysis of two complexities and an analysis of the significant differences in correlations are performed. The results serve to derive recommendations and insights for BP improvement. We apply the approach in the IT ticket handling process of the IT department of an academic institution. Our findings show that the suggested approach enables a comprehensive identification of BP redesign and improvement opportunities.}, language = {en} } @book{Tanski2023, author = {Tanski, Joachim}, title = {Compliance-Management}, edition = {1}, publisher = {Springer Gabler Wiesbaden}, isbn = {978-3-658-40681-3 (Softcover) 978-3-658-40682-0 (e-Book)}, doi = {https://doi.org/10.1007/978-3-658-40682-0}, pages = {63}, year = {2023}, abstract = {Dieses Buch bietet eine komprimierte und praxisorientierte Einf{\"u}hrung in die Grundlagen und Anforderungen eines Compliance-Managements, um den Leser schnell mit aktuellen und zentralen Regelungen vertraut zu machen. Dabei wird auf gesetzliche und regulatorische Bestimmungen ebenso eingegangen wie auf betriebswirtschaftliche Notwendigkeiten, um Mitarbeitende und Unternehmen vor den schwerwiegenden Folgen von Compliance-Verst{\"o}ßen zu sch{\"u}tzen.}, language = {de} } @incollection{RevinaRizunAksu2023, author = {Revina, Aleksandra and Rizun, Nina and Aksu, {\"U}nal}, title = {Towards a Framework for Context Awareness Based on Textual Process Data: Case Study Insights}, series = {Lecture Notes in Business Information Processing}, booktitle = {Lecture Notes in Business Information Processing}, number = {466}, publisher = {Springer Cham}, isbn = {978-3-031-26885-4 (Print) 978-3-031-26886-1 (online)}, doi = {https://doi.org/10.1007/978-3-031-26886-1_2}, year = {2023}, abstract = {Context awareness is critical for the successful execution of processes. In the abundance of business process management (BPM) research, frameworks exclusively devoted to extracting context from textual process data are scarce. With the deluge of textual data and its increasing value for organizations, it becomes essential to employ relevant text analytics techniques to increase the awareness of process workers, which is important for process execution. The present paper addresses this demand by developing a framework for context awareness based on process executions-related textual data using a well-established layered BPM context model. This framework combines and maps various text analytics techniques to the layers of the context model, aiming to increase the context awareness of process workers and facilitate informed decision-making. The framework is applied in an IT ticket processing case study. The findings show that contextual information obtained using our framework enriches the awareness of process workers regarding the process instance urgency, complexity, and upcoming tasks and assists in making decisions in terms of these aspects.}, language = {en} } @article{LachowskiHammermeisterHalenzetal.2023, author = {Lachowski, Krzysztof and Hammermeister, Florian and Halenz, Bastian and Lieckefett, Florian and G{\"o}tze, Thomas and Prill, Robert and Becker, Roland}, title = {The Patellostabilometer: A New Device for Quantification of Mediolateral Patella Displacement}, series = {Sensors}, journal = {Sensors}, number = {23 (3)}, publisher = {MDPI}, doi = {https://doi.org/10.3390/s23031274}, year = {2023}, abstract = {Mediolateral patella displacement is of interest for diagnostics and clinically relevant research questions. Apart from manual testing, no standardized method is currently available. Proper quantification of patella mobility is necessary to better understand pathologies at the patellofemoral joint. Patella mobility was assessed in 25 healthy individuals using a Patellostabilometer, a new prototype instrument for quantification of the mediolateral patella displacement. The participants underwent measurements of the mediolateral displacement three times using the Patellostabilome- ter. A maximal force of 10 N was applied for patella movement. Additionally, leg length and circumference of the knee, upper- and lower-leg were measured. Lateral patella displacement of 18.27 ± 3.76 mm (range 15.85-20.64 mm, interquartile range (IQR) of 4.79) was measured. The medial patella displacement showed 24.47 ± 6.59 mm (range 19.29-29.76 mm, IQR of 10.47). The test-retest measurement error was 2.32 ± 1.76 mm (IQR of 2.38 mm), with five outliers. There was greater test-retest variability between the measurements of the medial displacement compared to the lateral one. The test-retest variability reached 7\% of the patella displacement. Other parameters provided no significant correlations. Based on the natural patellofemoral mobility, a precise and clinically relevant quantification of patella mobility is allowed.}, language = {en} } @incollection{Tanski2023, author = {Tanski, Joachim}, title = {Limitierende Faktoren}, series = {Compliance-Management}, booktitle = {Compliance-Management}, publisher = {Springer ebooks}, doi = {10.1007/978-3-658-40682-0_4}, pages = {49 -- 49}, year = {2023}, abstract = {Wie bei allen Risiken gibt es auch bei Compliance-Risiken kein Null-Risiko. Man wird in der Praxis noch nicht einmal in die unmittelbare N{\"a}he einer Null kommen. Ein Null-Compliance-Risiko ist auch deshalb nicht erreichbar, weil sich st{\"a}ndig neue Risikofelder auftun. So beispielsweise durch {\"A}nderung von Gesch{\"a}ftsmodellen oder Vertriebswegen oder durch neue rechtliche Rahmenbedingen.}, language = {de} } @article{RizunRevinaEdelmann2023, author = {Rizun, Nina and Revina, Aleksandra and Edelmann, Noella}, title = {Application of Text Analytics in Public Service Co-Creation: Literature Review and Research Framework}, series = {DG.O 2023: The 24th Annual International Conference on Digital Government Research}, journal = {DG.O 2023: The 24th Annual International Conference on Digital Government Research}, publisher = {Association for Computing Machinery}, doi = {10.1145/3598469.3598471}, pages = {12 -- 22}, year = {2023}, abstract = {The public sector faces several challenges, such as a number of external and internal demands for change, citizens' dissatisfaction and frustration with public sector organizations, that need to be addressed. An alternative to the traditional top-down development of public services is co-creation of public services. Co-creation promotes collaboration between stakeholders with the aim to create better public services and achieve public values. At the same time, data analytics has been fuelled by the availability of immense amounts of textual data. Whilst both co-creation and TA have been used in the private sector, we study existing works on the application of Text Analytics (TA) techniques on text data to support public service co-creation. We systematically review 75 of the 979 papers that focus directly or indirectly on the application of TA in the context of public service development. In our review, we analyze the TA techniques, the public service they support, public value outcomes, and the co-creation phase they are used in. Our findings indicate that the TA implementation for co-creation is still in its early stages and thus still limited. Our research framework promotes the concept and stimulates the strengthening of the role of Text Analytics techniques to support public sector organisations and their use of co-creation process. From policy-makers' and public administration managers' standpoints, our findings and the proposed research framework can be used as a guideline in developing a strategy for the designing co-created and user-centred public services.}, language = {en} } @incollection{BurgerMenzel2023, author = {Burger-Menzel, Bettina}, title = {Wirtschaftsf{\"o}rderung und E-Governance: Von der Resilienz zur Transformation?}, series = {Wirtschaftsf{\"o}rderung in der Krise}, booktitle = {Wirtschaftsf{\"o}rderung in der Krise}, publisher = {Springer Gabler}, address = {Wiesbaden}, doi = {10.1007/978-3-658-41390-3_10}, pages = {171 -- 196}, year = {2023}, abstract = {Unsere Welt ver{\"a}ndert sich in unterschiedlichen Tempi und Verwerfungstiefen. Dies ist das einzig Verl{\"a}ssliche f{\"u}r Wirtschaft und Gesellschaft. Zum einen z{\"a}hlt die kreative Zerst{\"o}rung zum ‚Markenkern' marktwirtschaftlicher Systeme. Die Wirtschaftsakteure stehen dadurch an ihrem jeweiligen Standort unter einer Art (produktivem) Dauerstress. Es gibt Gewinner und Verlierer, weil Wettbewerber unterschiedlich erfolgreich kostensenkende Rationalisierungen, technischen Fortschritt und die Erschließung neuer (globaler) M{\"a}rkte realisieren. Der damit einhergehende Strukturwandel gilt als wirtschaftssystemischer Normalzustand. Zum anderen gibt es Krisen. Und auch ‚unter Schock' (re-)agieren Akteure ungleich, wie die Corona-Pandemie oder abrupte Ver{\"a}nderungen durch die Finanzkrise zeigen. Einige Akteure und Standorte bleiben mit ihrem jeweiligen Profil und Potenzial (weiterhin) produktiv widerstandsf{\"a}hig. F{\"u}r andere versch{\"a}rfen sich der wirtschaftliche Niedergang und dessen Folgen f{\"u}r die Arbeitsm{\"a}rkte und Lebensqualit{\"a}t der Betroffenen. Regionale Wirtschaftsf{\"o}rderung unterst{\"u}tzt, dass sich die Wirtschaftsstrukturen an einem Standort {\"u}berlebensf{\"a}hig ausrichten. Doch kann sie auch beim Umgang mit Krisen einen Mehrwert erzielen und z{\"a}hlt dies {\"u}berhaupt zu ihrem Regelauftrag? Und welche Rolle spielt die Digitalisierung? Der Beitrag stellt den sachlogischen Zusammenhang zwischen diesen Teilfragen her und ordnet neuere Ans{\"a}tze ein. Zudem werden Ansatzstellen aufgezeigt, um die regionale Wirtschaftsf{\"o}rderung praxisorientiert weiterzuentwickeln. ‚Electronic Government' (E-Government) beschreibt dabei den Einsatz von Informationstechnik, Telekommunikation und Medien (ITKM) im {\"o}ffentlichen Sektor, w{\"a}hrend ‚Electronic Governance' (E-Governance) hybride oder private Akteure miteinbezieht. Der Beitrag ist wie folgt strukturiert: Zun{\"a}chst werden Schl{\"u}sselbegriffe wie Strukturpolitik und Resilienz gekl{\"a}rt und mit den Kontextfaktoren verkn{\"u}pft, welche die Steuerungslogik von Wirtschaftsf{\"o}rderung bestimmen. Danach wird diskutiert, inwiefern die Wirtschaftsf{\"o}rderung E-Government und E-Governance nutzen kann, um Resilienz zu st{\"a}rken und m{\"o}glichst transformativ wirken zu k{\"o}nnen.}, language = {de} } @article{VaherTammSalusetal.2023, author = {Vaher, Ivi and Tamm, Anna-Liisa and Salus, Marit and Reisberg, Kirkke and V{\"a}hi, Aleksandra and Pallon, Helena and Paeste, Andra and Pirk, B{\"a}thel-Betty and Merila, Margus and Schrader, Thomas}, title = {Effectiveness of massage chair and classic massage in recovery from physical exertion: a pilot study}, series = {Journal of Novel Physiotherapy and Rehabilitation}, volume = {2023}, journal = {Journal of Novel Physiotherapy and Rehabilitation}, number = {7}, publisher = {HSPI}, doi = {10.29328/journal.jnpr.1001050}, pages = {8 -- 15}, year = {2023}, abstract = {Quick and cost-effective recovery is foundational to high-quality training and good competition results in today's sports. The aim of the research was to elucidate the effects of hand and massage chair massage on the biomechanical parameters of muscles of lower limbs and back, indicators of Pain Pressure Thresholds (PPT) and subjectively perceived fatigue. A total of 32 female recreational athletes (18 - 50 years old) were assigned to a hand massage, massage chair, or lying down the group. They were measured for muscle biomechanical properties (MyotonPro), PPT (Wagner Instruments) and subjectively perceived fatigue (VAS scale) before and after fatigue tests and treatment. The recovery procedure and subjective satisfaction with treatment were rated on a Likert scale. Changes in the median value of m. rectus femoris and m. gastrocnemius stiffness with treatment showed that hand massage could be more effective in reducing stiffness, as compared to chair massage. Hand massage may have benefits for recovery from physical exertion, but due to the individuality of subjects, detailed methodological studies are needed to evaluate the effects of massage chair vs. hand massage.}, language = {en} } @inproceedings{PanitzSpieckerIanetal.2023, author = {Panitz, Michael and Spiecker, Claus and Ian, Wolff and von Fransecky, Tanja and Schiller, Carina and Klein, Maike and Krupka, Daniel and Winter, Cornelia and Wohlgemuth, Volker}, title = {Von der Bedarfserhebung zum Beratungsangebot}, series = {Konferenz: INFORMATIK 2023 - Designing Futures: Zuk{\"u}nfte gestalten;Bildung - Aktuelle Entwicklungen und Perspektiven (an Hochschulen) im Bereich Data Science; Berlin / Titel: Lecture Notes in Informatics (LNI) - Proceedings, Volume P-337 | 26.-29. September 2023}, booktitle = {Konferenz: INFORMATIK 2023 - Designing Futures: Zuk{\"u}nfte gestalten;Bildung - Aktuelle Entwicklungen und Perspektiven (an Hochschulen) im Bereich Data Science; Berlin / Titel: Lecture Notes in Informatics (LNI) - Proceedings, Volume P-337 | 26.-29. September 2023}, publisher = {Gesellschaft f{\"u}r Informatik}, isbn = {978-3-88579-731-9}, issn = {1617-5468}, doi = {10.18420/inf2023_12}, pages = {129 -- 136}, year = {2023}, abstract = {orschungsdatenmanagement (FDM) gewinnt aufgrund der Anforderung nach wissen- schaftlicher Nachvollziehbarkeit und Nachnutzung von Daten an Hochschulen an Bedeutung. Die Bedarfserhebung in Brandenburg ist die erste, die sich an alle Forschenden sowohl an Fachhoch- schulen als auch an Universit{\"a}ten eines ganzen Bundeslandes richtet. Erhoben werden Kenntnisstand und Bedarfe f{\"u}r Beratung, Schulung und technische Unterst{\"u}tzung im Umgang mit Daten als Basis f{\"u}r den lokalen und landesweiten Aufbau von Infrastruktur und Serviceangeboten. Der Fragenkatalog basiert auf einer bundesweiten Erhebung an Fachhochschulen zu FDM. Erste Zwischenergebnisse der Erhebung deuten darauf hin, dass die Kenntnisse zu FDM sehr gering und die Bedarfe zu Beratung, Schulungen und unterst{\"u}tzender technischer Infrastruktur hoch sind.}, language = {de} } @article{Vollmer2023, author = {Vollmer, Michael}, title = {Die Grenzen des Auges}, series = {Physik Journal}, journal = {Physik Journal}, number = {3}, pages = {28 -- 33}, year = {2023}, abstract = {Mithilfe geeigneter Hilfsmittel lassen sich die Wahrnehmungsgrenzen des Auges {\"u}berwinden. Menschliche Augen weisen r{\"a}umliche, zeitliche und spektrale Begrenzungen auf, welche die Wahrnehmung einschr{\"a}nken. Geeignete optische Ger{\"a}te und Kameras helfen, diese zu {\"u}berwinden und eine große Vielfalt an physikalischen Ph{\"a}nomenen f{\"u}r die Lehre zu erschließen. Die Angaben zu den Anteilen an aufgenommener Information durch die menschlichen Sinnesorgane schwanken meist zwischen etwa 81 und 87 Prozent f{\"u}r die Augen, 10 bis 11 Prozent f{\"u}r die Ohren und dem Rest f{\"u}r schmecken, riechen und tasten. Das Produktmarketing macht sich dies gezielt zunutze. Offensichtlich ist f{\"u}r alle subjektiven Wahrnehmungen unserer Umwelt das Auge sehr wichtig; in Bezug auf r{\"a}umliche und zeitliche Aufl{\"o}sung sowie spektrale Empfindlichkeit ist es jedoch eingeschr{\"a}nkt. Die dadurch entstehenden Wahrnehmungsgrenzen f{\"u}r physikalische Vorg{\"a}nge und Objekte lassen sich durch geeignete optische Ger{\"a}te mit - das Auge ersetzenden - Sensoren in Kamerasystemen {\"u}berwinden (Abb. 1). Dies erh{\"o}ht die Zahl beobachtbarer technischer und nat{\"u}rlicher Ph{\"a}nomene und den daraus gewonnenen Informationsgehalt deutlich. Da entsprechende Kameras relativ preiswert sind und sich damit viele einfache Experimente erfolgreich demonstrieren lassen, kann ein gezielter Einsatz die Lehre der Physik an Schulen und in einf{\"u}hrenden Vorlesungen an Hochschulen bereichern und den Einstieg in verwandte Gebiete wie die Infrarotastronomie vorbereiten. (...)}, language = {de} } @article{FroschZuidhof, author = {Frosch, Katharina and Zuidhof, Niek}, title = {Using Mobile Technologies for Situating Bite-Sized Learning at the Workplace}, series = {International Journal On Advances in Intelligent Systems}, volume = {16}, journal = {International Journal On Advances in Intelligent Systems}, number = {3 \& 4}, publisher = {IARIA}, pages = {89 -- 101}, abstract = {Learning in the workplace is crucial for updating and upskilling the workforce to both new and existing employees. Given the limited opportunities for informal learning due to solitary work conditions or off-site locations, mobile devices like smartphones and wearables such as smart glasses can play a significant role. The aim of this paper is to investigate the extent to which mobile micro-learning can enhance work-related education, with a focus on lightweight, practical applications in learning-deprived environments. Comparative analyses are presented for mobile micro-learning approaches for smartphones and smart glasses based on recent studies, specifically examining their impact on learning and modes of interaction. Based on good practices of recent MML implementations, we present principles for implementation and offer lightweight proof-of-concept models for both handheld devices and smart glasses. This knowledge might be relevant for researchers, small and medium-sized enterprises, practitioners, and others involved in knowledge transfer}, language = {de} } @article{MalekiMohammadi2023, author = {Maleki, Maniya and Mohammadi, Mahdieh}, title = {Velocity and pressure functions of an oscillating flow in a circular Hele-Shaw cell}, series = {Iranian Journal of Physics Research}, volume = {22}, journal = {Iranian Journal of Physics Research}, number = {1}, publisher = {Physics Society of Iran}, doi = {10.47176/ijpr.22.1.81304}, pages = {113 -- 120}, year = {2023}, abstract = {In this study, we have investigated the form of velocity and pressure functions of a fluid oscillating between two parallel glass sheets that form a circular Hele-Shaw cell. The flow has been considered to be radial, incompressible and laminar. The time-dependent Navier-Stokes equation has been solved in cylindrical coordinates using Fourier transform, and the oscillating flow velocity across the thickness of the cell has been obtained at different times. The flow velocity function in the unsteady state is related to the vertical component of the coordinates in the form of parabolic functions and also to the inverse of the radial component. The time dependence appears as a simple harmonic with a frequency equal to the oscillation frequency. The velocity of the flow is maximum at the middle of the cell along its height and gradually decreases from the middle towards the top or bottom plane and reaches zero. Pressure does not depend on the height and changes logarithmically with the radius. The dependence of pressure on time is also a simple harmonic with the external frequency, but it has a phase shift with respect to the velocity.}, language = {en} } @inproceedings{SoniNeubertDietrichetal.2023, author = {Soni, Jaykumar and Neubert, Tom and Dietrich, Benjamin and Vielhauer, Claus}, title = {Virtual Sessions for Forensic Analysis of Video Conferencing Systems: A Novel Methodology}, series = {Konferenz: IARIA SECURWARE 2023, the Seventeenth International Conference on Emerging Security Information, Systems and Technologies: Porto, Portugal}, booktitle = {Konferenz: IARIA SECURWARE 2023, the Seventeenth International Conference on Emerging Security Information, Systems and Technologies: Porto, Portugal}, publisher = {IARIA}, pages = {18 -- 20}, year = {2023}, language = {en} } @article{HascheKaraschewskiCreutzburg2023, author = {Hasche, Eberhard and Karaschewski, Oliver and Creutzburg, Reiner}, title = {iPhone12 imagery in scene-referred computer graphics pipelines}, series = {Electronic Imaging}, journal = {Electronic Imaging}, publisher = {Society for Imaging Science and Technology}, doi = {10.2352/EI.2023.35.3.MOBMU-350}, pages = {350-1 -- 350-14}, year = {2023}, abstract = {With the release of the Apple iPhone 12 Pro Max in 2020, various features were integrated that make it attractive as a recording device for scene-related computer graphics pipelines. The captured Apple RAW images have a much higher dynamic range than the standard 8-bit images. Since a scene-based workflow naturally has an extended dynamic range (HDR), the Apple RAW recordings can be well integrated. To correctly integrate the iPhone 12 pro Apple RAW data into a scene-related workflow, two command-line software solutions, among others, are dcraw and rawtoaces. In this paper, we concentrate on dcraw. dcraw offers the possibility to export RAW images directly to ACES2065-1. Different images recorded under different lighting conditions are examined to determine which options for the dcraw development produce the best results. Images from five different lighting situations like D65, D60, D55, D50, and 2980K, are examined. The DNG files are developed using different methods within dcraw. The values of the recorded ColorChecker24 patches are compared to reference values derived from BabelColor [1] and ACES [2].}, language = {en} } @article{JasterCreutzburgHasche2023, author = {Jaster, Daniel and Creutzburg, Reiner and Hasche, Eberhard}, title = {A qualitative study of LiDAR technologies and their application areas}, series = {Electronic Imaging}, volume = {35}, journal = {Electronic Imaging}, publisher = {Society for Imaging Science and Technology}, doi = {10.2352/EI.2023.35.3.MOBMU-368}, pages = {368-1 -- 368-15}, year = {2023}, abstract = {In this work, the most relevant 3D LiDAR technologies and their applications in 2022 were investigated. For this purpose, applications of LiDAR systems were classified into the typical application areas "3D modeling", "smart city", "robotics", "smart automotive" and "consumer goods". The investigation has shown that neither "mechanical" LiDAR technologies, nor so-called solid-state LiDAR technologies, nor "hybrid" LiDAR technologies can be evaluated as optimal for the typical application areas. In none of the application areas could all of the elaborated requirements be met. However, the "hybrid" LiDAR technologies such as sequential MEMS LiDAR technology and sequential flash LiDAR technology proved to be among the most suitable for most typical application areas. However, other technologies also tended to be suitable for individual typical application areas. Finally, it was found that several of the LiDAR technologies investigated are currently equally suitable for some typical application areas. To evaluate the suitability, concrete LiDAR systems - of different technologies and properties - were compared with the specific requirements of exemplary applications of an application area. The results of the investigation provide an orientation as to which LiDAR technology is promising for which application area.}, language = {en} } @unpublished{BaevaBrunnerElmasetal.2023, author = {Baeva, Gergana and Brunner, Robert and Elmas, Filiz and Fresz, Benjamin and Fuß, Christine and Heß, Claudia and Kellmeyer, Philipp and Mahner, Malin and Paulheim, Heiko and Poretschkin, Maximilian and Puntschuh, Michael and Seyerlein-Klug, Annegrit}, title = {Welche Zertifizierung ist hilfreich f{\"u}r Verbraucher*innen?}, doi = {10.24406/publica-2132}, year = {2023}, abstract = {In diesem Whitepaper fokussieren wir uns auf die KI-Verordnung nicht erfasste freiwillige Zertifizierung. Dabei stehen die Interessen und Sichtweisen der Verbraucher*innen im Vordergrund. Als Verbraucher*innen betrachten wir nicht nur die unmittelbaren Nutzer*innen von KI-Systemen, sondern auch Privatpersonen, die indirekt von KI-Ergebnissen betroffen sein k{\"o}nnen. Zudem ber{\"u}cksichtigen wir Menschen in der Rolle als souver{\"a}ne Datensubjekte, deren personenbezogene Daten in die Entwicklung von KI-Systemen einfließen. Dieses breite Verst{\"a}ndnis des Verbraucher*innenbegriffs entspricht dem Selbstverst{\"a}ndnis des Zentrums f{\"u}r vertrauensw{\"u}rdige K{\"u}nstliche Intelligenz (ZVKI). Wir stellen Thesen auf, wie freiwillige Zertifizierungen von KI-Systemen f{\"u}r Verbraucher*innen n{\"u}tzlich sein k{\"o}nnen. Die im Verlauf vorgestellten und begr{\"u}ndeten acht Thesen wurden in einer Reihe von interdisziplin{\"a}ren Workshops erarbeitet. Dabei identifizierten wir Herausforderungen einer KI-Zertifizierung aus Verbraucher*innensicht und pr{\"a}zisierten diese iterativ. Die Gruppendiskussionen dienten als Grundlage dieses Whitepapers und bauten auf Erkenntnissen der Fach-Arbeitsgruppe „KI Zertifizierung" des ZVKI auf. Alle Co-Autor*innen waren an der Erstellung des finalen Texts beteiligt. Die aufgestellten Thesen thematisieren grundlegende Anforderungen an eine KI-Zertifizierung aus einer {\"u}bergeordneten Perspektive, unabh{\"a}ngig von den spezifischen Details einer KI-Anwendung. Somit liefern sie keine Aussagen zu konkreten Inhalten der Zertifizierung. Detaillierte Empfehlungen setzen eine umfassende Analyse von Einsatzf{\"a}llen voraus, die in diesem Rahmen nicht geleistet werden kann.}, language = {de} } @techreport{OlschewskiBluhmFirnkornetal.2023, author = {Olschewski, Detlef and Bluhm, Andr{\´e} and Firnkorn, Joerg and Lucieri, Adriano and Palacio, Sebastian and Streppel, Yeji and Zednik, Carlos and G{\"o}rge, Rebekka and Poretschkin, Maximilian and Becker, Nikolas and Zielke, Thomas and Kruschel, Christian and Neumann-Brosig, Matthias and B{\"a}uerle, Stephen and Eifert, Marton and L{\´o}pez, Erik Martori and Assion, Felix and Seyerlein-Klug, Annegrit and Schmid, Ute and Haufe, Stefan and Gautier, Antoine and Bieringer, Lukas and Besold, Tarek R. and Cremers, Armin B.}, title = {DIN SPEC 92001-3 Artificial Intelligence - Life Cycle Processes and Quality Requirements - Part 3: Explainability}, publisher = {Beuth Verlag}, pages = {24}, year = {2023}, abstract = {DIN SPEC 92001-3 Artificial Intelligence - Life Cycle Processes and Quality Requirements. Artificial Intelligence has become a game-changer, but its impact must be approached responsibly. This is the third document in a series, and it aims to ensure that AI systems are developed, deployed, and used efficiently, responsibly, and in a trustworthy way. It focuses on "Explainability" - the ability to understand how AI makes decisions. This DIN SPEC 92001-3 provides a domain-independent guide on promoting explainability throughout the AI system's life cycle. It tackles "opacity", describing sources and effects of opacity in AI and how explanations can mitigate them. The goal is to foster a better understanding and effective use of Explainable AI across various applications, fostering principles of trust and transparency in AI-based systems. This DIN SPEC is the result of „Zertifizierung von Standard-KI-Anwendungen (Zertifizierte KI project)" https://www.zertifizierte-ki.de/. The publication is available for free at Beuth Verlag GmbH www.beuth.de - plus the search for "DIN SPEC 92001-3"}, language = {en} } @inproceedings{Kramann2023, author = {Kramann, Guido}, title = {AOGscript - Design of a Stand-Alone Scripting Language for the Generation of Music. Proceedings of the International Symposium on Ubiquitous Music, 2023}, series = {Konferenz: 13th International Symposium on Ubiquitous Music 2023 (Ubimus23) , Ulster University, Derry~Londonderry, Northern Ireland, 2-4 November, 2023}, booktitle = {Konferenz: 13th International Symposium on Ubiquitous Music 2023 (Ubimus23) , Ulster University, Derry~Londonderry, Northern Ireland, 2-4 November, 2023}, publisher = {Zenodo}, isbn = {978-65-00-85069-7}, doi = {10.5281/zenodo.10670220}, pages = {95 -- 109}, year = {2023}, abstract = {Ubiquitous Music is an interdisciplinary research area that combines methodologies from music, computer science, education, creativity studies, human sciences and engineering. The Ubiumus 2023 symposium, held at Ulster University and North West Regional College in Derry~Londonderry, Northern Ireland, included contributions on the following topics: Rapid Prototyping and Live Environments Ecological Approaches to Ubiquitous Music Ubiquitous Music Creative Practices, Tools and Influences The symposium also included a number of artistic contributions and workshops, which are also discussed in the proceedings volume. A number of events (including all paper presentations, an invited lecture, a panel discussion, and a keynote and associated performance) were also documented via video, with a link available in this Proceedings volume.}, language = {en} } @inproceedings{Guido2023, author = {Guido, Kramann}, title = {AOGscript, Generative Code as Conceptual Artwork: Giving Space to Astonishment. Proceedings of xCoAx 2023}, series = {Konferenz: xCoAx 2023 11th Conference on Computation, Communication, Aesthetics \& X}, booktitle = {Konferenz: xCoAx 2023 11th Conference on Computation, Communication, Aesthetics \& X}, publisher = {i2ADS}, address = {Porto, Portugal}, isbn = {978-989-9049-52-9}, doi = {10.34626/xcoax.2023}, pages = {401 -- 408}, year = {2023}, language = {en} } @article{MikhailovLamkinDegterevetal.2023, author = {Mikhailov, Ivan Igorevich and Lamkin, I. A. and Degterev, Aleksandr and Degtereva, Mariya and Pavlova, Marina and Kurachkina, Marharyta and Tarasov, S. A. and Kuzmina, Ulyana}, title = {Фоточувствительные структуры с каскадными концентраторами излучения на основе коллоидных квантовых точек халькогенидов металлов}, series = {Journal of the Russian Universities Radioelectronics}, volume = {26}, journal = {Journal of the Russian Universities Radioelectronics}, number = {2}, publisher = {Saint Petersburg Electrotechnical University}, issn = {2658-4794}, doi = {10.32603/1993-8985-2023-26-2-78-88}, pages = {78 -- 88}, year = {2023}, abstract = {The problem of increasing the efficiency of existing photodetectors and creating their new types attracts much research attention. Among new photodetector types are photosensitive structures based on cascade concentrators, whose operational principle involves the absorption of optical radiation followed by its reemission at a longer wavelength and radiation concentration onto a highly efficient small-area photodetector. The absorption and re-emission spectra of each cascade layer depend on the characteristics of the material used. Сolloidal quantum dots are among the most promising materials for cascade layers due to their manufacturing technology, which provides for accurate control over the photoluminescence maximum position. It seems highly relevant to develop and to study photosensitive structures with cascade concentrators of various shapes based on CdS, CdSe/ZnS, and PbS colloidal quantum dots. Aim . To develop photosensitive structures with a wide-range sensitivity spectrum based on concentrators containing arrays of metal chalcogenide CQDs and to study their characteristics. Materials and methods . Cascade photosensitive structures were manufactured based on layers made of polymethyl methacrylate and layers of colloidal quantum dots embedded in a polystyrene matrix. Results . Three-layer concentrators were manufactured with different colloidal quantum dots in each concentrator layers. A 22 \% increase in the output power was observed for a three-layer cascade structure based on different cascade layer materials compared to a similar structure using a single layer concentrator. Conclusion . The conducted studies showed an increase in the efficiency of photosensitive structures with a cascade concentrator based on colloidal quantum dots of various types (CdS, CdSe/ZnS, and PbS) in the cascade layers.}, language = {ru} } @article{Vollmer2023, author = {Vollmer, Michael}, title = {So weit das Auge tr{\"a}gt}, series = {Physik in unserer Zeit}, volume = {54}, journal = {Physik in unserer Zeit}, number = {5}, publisher = {Wiley}, issn = {1521-3943}, doi = {10.1002/piuz.202301675}, pages = {222 -- 230}, year = {2023}, abstract = {Sichtweiten in der Atmosph{\"a}re reichen von wenigen Metern im Nebel bis zu einigen hundert Kilometern bei extrem guten Fernsichtbedingungen. Die zugrundeliegende Physik geht vom Wahrnehmungskontrast aus. Dieser {\"a}ndert sich mit der Entfernung entlang der Sichtlinie zwischen Objekt und Auge aufgrund von Lichtstreuung und Absorption an den Bestandteilen der Atmosph{\"a}re. Dazu kommt bei der Fernsicht die Refraktion, die es erlaubt, auch {\"u}ber den durch die Kugelform der Erde geometrisch bedingten Horizont hinaus zu sehen.}, language = {de} } @unpublished{Tarassow2023, author = {Tarassow, Artur}, title = {The potential of LLMs for coding with low-resource and domain-specific programming languages}, doi = {10.48550/arXiv.2307.13018}, pages = {1 -- 27}, year = {2023}, abstract = {This paper presents a study on the feasibility of using large language models (LLM) for coding with low-resource and domain-specific programming languages that typically lack the amount of data required for effective LLM processing techniques. This study focuses on the econometric scripting language named hansl of the open-source software gretl and employs a proprietary LLM based on GPT-3.5. Our findings suggest that LLMs can be a useful tool for writing, understanding, improving, and documenting gretl code, which includes generating descriptive docstrings for functions and providing precise explanations for abstract and poorly documented econometric code. While the LLM showcased promoting docstring-to-code translation capability, we also identify some limitations, such as its inability to improve certain sections of code and to write accurate unit tests. This study is a step towards leveraging the power of LLMs to facilitate software development in low-resource programming languages and ultimately to lower barriers to entry for their adoption.}, language = {en} } @article{LevinaFrosch2023, author = {Levina, Olga and Frosch, Katharina}, title = {How little code is low-code? -Towards productivity measures for the use of low-code development platforms by business user developers}, series = {The International Journal on Advances in Software}, volume = {16}, journal = {The International Journal on Advances in Software}, number = {3 \& 4}, publisher = {IARIA}, pages = {215 -- 223}, year = {2023}, abstract = {Low code development platforms (LCDP) often promise an easy and fast way to include data processing and support into the otherwise non-digital process. This research explores how to measure the productivity of low code development to assess the effort needed for business users to respond to their need for support via these tools. We chose field experiments as a research method to evaluate the feasibility and derive the metrics for software development with LCDP by novices. The paper provides some insights on how these measures can be implemented in practice, how to support business unit developers to efficiently deliver productive results, and how to evaluate LCDP-based development processes.}, language = {en} } @inproceedings{FroschLevina2023, author = {Frosch, Katharina and Levina, Olga}, title = {Taking the Matter in their own Hands - Can Business Unit Developers Fullfill their Digital Demands with Low-Code Development Platforms?}, series = {Konferenz: IARIA ICDS 2023, The Seventeenth International Conference on Digital Society; Venice (Italy)}, booktitle = {Konferenz: IARIA ICDS 2023, The Seventeenth International Conference on Digital Society; Venice (Italy)}, publisher = {IARIA}, pages = {1 -- 4}, year = {2023}, abstract = {Low Code Development Platforms (LCDP) often promise an easy and fast way to include data processing and support into the otherwise non-digital process. Nevertheless, it often remains unclear, besides anecdotal evidence, how business users are getting on with transformation of business requirements into the software. This research explores the potential low code development has for business users to address their needs for process support via software tools. The experiment was chosen as the research method to assess the feasibility of software development with LCDP by novices. The results point towards a dedicated LCDP implementation approach if the technology is to be implemented in the business context. Hence, the research provides suggestions on how Business Unit Developers (BUD) can be supported to efficiently deliver productive results and how to assess LCDP-based development process and points towards potential challenges of LCDP implementation.}, language = {en} } @inproceedings{LemkeMeisterWessels2023, author = {Lemke, Claudia and Meister, Vera and Weßels, Doris}, title = {Kritische Reflexion und Handlungsans{\"a}tze zum Einsatz Generativer KI in der Wirtschaftsinformatik-Lehre}, series = {36. Jahrestagung des Arbeitskreises Wirtschaftsinformatik (AKWI)}, booktitle = {36. Jahrestagung des Arbeitskreises Wirtschaftsinformatik (AKWI)}, pages = {16}, year = {2023}, abstract = {Die digitalen Technologien ver{\"a}ndern die Gesellschaft, auch die akademischen Wissen-schaftssysteme sind betroffen. Das erfordert verst{\"a}rkte {\"U}berlegungen zum Einsatz solcher Techno-logien und zu ihrem Einfluss auf Lehre und Studium. Der Beitrag fokussiert die Relevanz von AI-Literacy im Kontext des Einsatzes Generativer KI aus zwei Perspektiven. Zun{\"a}chst wird die Wahr-nehmung und Bereitschaft von Studierenden, KI-basierte Tools zur automatisierten Textgenerierung zu nutzen, empirisch untersucht. Im zweiten Teil wird ein auf Ko-Kreation ausgerichtetes Lehrkon-zept modelliert, das neben fachlichen auch AI-Literacy-Kompetenzen adressiert. Die Ergebnisse f{\"u}hren zu Handlungsans{\"a}tzen, insbesondere f{\"u}r Wirtschaftsinformatik-Studieng{\"a}nge.}, language = {de} } @inproceedings{Levina2023, author = {Levina, Olga}, title = {Mobile Instant Messaging and User Interface Design -Different Age Groups, Different Requirements? A survey of Indonesian users}, series = {Konferenz: IARIA ICDS 2023, The Seventeenth International Conference on Digital Society; Venice, Italy}, booktitle = {Konferenz: IARIA ICDS 2023, The Seventeenth International Conference on Digital Society; Venice, Italy}, publisher = {IARIA}, pages = {5 -- 8}, year = {2023}, abstract = {Instant Messaging (IM) is an increasingly popular form of communication in which two or more people exchange text-based multi-media messages in real time. However, as a result of aging, users have different needs and requirements towards the design of the communication application. This paper examines the preferences of users of different ages towards the User Interface (UI) design of Mobile Instant Massage (MIM) applications, i.e., instant message applications that can operate on smartphones. An online survey data about users' preferences towards the UI of this application type, limited to Indonesian users, was obtained. The results indicate that for some UI elements, both age groups showed the same preferences, while other requirements were significantly different. This paper aims to give a better understanding of the interface of the MIM application preferred by its users according to their age and thus inform application designers and product owners.}, language = {en} } @incollection{MingioneKristal2023, author = {Mingione, Michela and Kristal, Samuel}, title = {Brand value co-creation: field emergence, applications, measurement and future research directions}, series = {A Research Agenda for Brand Management in a New Era of Consumerism}, booktitle = {A Research Agenda for Brand Management in a New Era of Consumerism}, publisher = {Edward Elgar Publishing}, address = {Cheltenham, UK}, doi = {10.4337/9781803925516.00013}, pages = {89 -- 106}, year = {2023}, language = {en} } @book{Brasche2023, author = {Brasche, Ulrich}, title = {Climate justice and the Global South - The road to solving climate change}, publisher = {Books on Demand}, isbn = {Print 9783758302381}, pages = {172}, year = {2023}, abstract = {Climate will be decided in the global south Mankind is on a dangerous journey in the Anthropocene. Arriving at a good life for all within planetary boundaries is still possible. But at present, the journey is more likely to lead to an overheating of the Earth. Health and life would then be massively endangered for many living beings - including humans. A positive development is still possible, but it requires a global transformation of the economy and society. The prosperous states and companies are well advised, to respect the interests of the global south and future generations, and to use wisely the considerable financial resources in a cooperation of equals. This book • highlights past carbon emissions and their consequences, • reflects on the main drivers of future emissions, • discusses strategies like green growth, de-growth, • presents market-based instruments like carbon trading and carbon border adjustment and • emphasises the key role played by the emerging countries of the global south. It is not only a matter of justice but furthermore in the interest of the rich countries in the global north to contribute massively to financing a "green leapfrogging" of the global south into a carbon-free prosperity. Failing to achieve it will bring unspeakable losses and suffering to many people all over the planet.}, language = {en} } @book{Brasche2023, author = {Brasche, Ulrich}, title = {Auf dem Weg zu mehr Klimagerechtigkeit Im B{\"u}ndnis mit dem Globalen S{\"u}den Widerst{\"a}nde {\"u}berwinden}, publisher = {oekom-Verlag}, address = {M{\"u}nchen}, isbn = {978-3-98726-045-2}, doi = {10.14512/9783987262746}, pages = {174 Seiten}, year = {2023}, abstract = {Die Menschen sind im Anthropoz{\"a}n auf einer gef{\"a}hrlichen Reise. Das Ziel steht noch nicht fest. Die Ankunft in einem guten Leben f{\"u}r alle innerhalb planetarer Grenzen ist immer noch m{\"o}glich. Aber zurzeit f{\"u}hrt die Reise eher zu einer {\"U}berhitzung der Erde. Gesundheit und Leben w{\"a}ren dann f{\"u}r viele Lebewesen - auch f{\"u}r den Menschen - massiv gef{\"a}hrdet. Das Buch behandelt die Fragen: • Wie sind wir in diese Lage geraten? • In welcher Richtung k{\"o}nnen Auswege liegen? • Welche Hindernisse sind zu {\"u}berwinden? Es werden Strategien abgewogen und einige {\"u}berraschende B{\"u}ndnispartner identifiziert. Geschickt gestaltete M{\"a}rkte k{\"o}nnen helfen, die Erderw{\"a}rmung aufzuhalten. Nur in einer gleicheren und gerechteren Welt k{\"o}nnten alle Menschen gut, aber bescheidener leben. Die Alternative dazu w{\"a}re eine {\"u}bererhitzte, gef{\"a}hrliche Welt. Eine gute Entwicklung ist noch m{\"o}glich. Sie erfordert eine globale Transformation von Wirtschaft und Gesellschaft. Die wohlhabenden Staaten sind gut beraten, die Interessen des „Globalen S{\"u}dens" und der k{\"u}nftigen Generationen zu respektieren - auch durch den klugen Einsatz erheblicher Finanzmittel und eine Kooperation auf Augenh{\"o}he.}, language = {de} } @inproceedings{RevinaKalabinaBelyak2023, author = {Revina, Aleksandra and Kalabina, Elena and Belyak, Olga}, title = {Employee Engagement and Soft Skills in the Digitalization of the Economy. Preliminary Study Results}, series = {Kumar, V., Kyriakopoulos, G.L., Akberdina, V., Kuzmin, E. (eds) Digital Transformation in Industry . DTI 2022. Lecture Notes in Information Systems and Organisation, vol 61. Springer, Cham}, booktitle = {Kumar, V., Kyriakopoulos, G.L., Akberdina, V., Kuzmin, E. (eds) Digital Transformation in Industry . DTI 2022. Lecture Notes in Information Systems and Organisation, vol 61. Springer, Cham}, publisher = {Springer}, doi = {10.1007/978-3-031-30351-7_34}, pages = {467 -- 479}, year = {2023}, abstract = {The fast-paced digitalization and automation make hard skills acquired by employees in their academic study programs outdated and irrelevant very fast. Hence, researchers and practitioners have recently demonstrated a growing interest in studying soft skills in various settings, including leadership, education, and training. Additionally, in times of digital transformation, businesses are promoting employee engagement evermore, particularly in the present context of crises and instability. The research intends to investigate this issue from the viewpoint of employee soft skills. We specifically look into the link between employees' soft skills and workplace engagement. While doing our research in two different countries, we distinguish between commercial and non-commercial organizations as well as add an international perspective. Based on an acknowledged European skills framework, we focus our study on such soft skills as teamwork, communication, and conflict management and use recognized surveys to quantify them. We use a well-known Gallup methodology to evaluate employee engagement. Using correlation analysis, we investigate the impact of the three selected skills on employee engagement while considering the organization type and country, factors that may play an important role in the digital transformation of businesses and companies.}, language = {en} } @article{MansoorSchwarzCreutzburg2023, author = {Mansoor, Nazneen and Schwarz, Klaus and Creutzburg, Rainer}, title = {Importance of OSINT/SOCMINT for modern disaster management evaluation - Australia, Haiti, Japan}, series = {Electronic Imaging}, volume = {35}, journal = {Electronic Imaging}, number = {3}, publisher = {Society for Imaging Science and Technology (IS\&T)}, doi = {10.2352/EI.2023.35.3.MOBMU-354}, pages = {354-1 -- 354-14}, year = {2023}, abstract = {Open-source technologies (OSINT) and Social Media Intelligence (SOCMINT) are becoming increasingly popular with investigative and government agencies, intelligence services, media companies, and corporations. These OSINT and SOCMINT technologies use sophisticated techniques and special tools to efficiently analyze the continually growing sources of information. There is a great need for training and further education in the OSINT field worldwide. This report describes the importance of open source or social media intelligence for evaluating disaster management. It also gives an overview of the government work in Australia, Haiti, and Japan for disaster management using various OSINT tools and platforms. Thus, decision support for using OSINT and SOCMINT tools is given, and the necessary training needs for investigators can be better estimated.}, language = {en} } @misc{OPUS4-3251, title = {Jahrbuch 2022/2023 der Absolventinnen und Absolventen}, editor = {Wilms, Andreas}, publisher = {Technische Hochschule Brandenburg}, address = {Brandenburg an der Havel}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:522-opus4-32514}, pages = {80}, year = {2023}, language = {de} } @article{VishnevskayaSchwarzCreutzburg2023, author = {Vishnevskaya, Valeria and Schwarz, Klaus and Creutzburg, Reiner}, title = {Practical OSINT investigation - Similarity calculation using Reddit user profile data}, series = {Electronic Imaging}, volume = {35}, journal = {Electronic Imaging}, number = {3}, publisher = {Society for Imaging Science and Technology (IS\&T)}, doi = {10.2352/EI.2023.35.3.MOBMU-356}, pages = {356-1 -- 356-10}, year = {2023}, abstract = {This paper presents a practical Open Source Intelligence (OSINT) use case for user similarity measurements with the use of open profile data from the Reddit social network. This PoC work combines the open data from Reddit and the part of the state-of-the-art BERT model. Using the PRAW Python library, the project fetches comments and posts of users. Then these texts are converted into a feature vector - representation of all user posts and comments. The main idea here is to create a comparable user's pair similarity score based on their comments and posts. For example, if we fix one user and calculate scores of all mutual pairs with other users, we will produce a total order on the set of all mutual pairs with that user. This total order can be described as a degree of written similarity with this chosen user. A set of "similar" users for one particular user can be used to recommend to the user interesting for him people. The similarity score also has a "transitive property": if \$user_1\$ is "similar" to \$user_2\$ and \$user_2\$ is similar to \$user_3\$ then inner properties of our model guarantees that \$user_1\$ and \$user_3\$ are pretty "similar" too. In this way, this score can be used to cluster a set of users into sets of "similar" users. It could be used in some recommendation algorithms or tune already existing algorithms to consider a cluster's peculiarities. Also, we can extend our model and calculate feature vectors for subreddits. In that way, we can find similar to the user's subreddits and recommend them to him.}, language = {en} } @article{SkylarSchwarzCreutzburg2023, author = {Skylar, Artem and Schwarz, Klaus and Creutzburg, Reiner}, title = {Practical OSINT investigation in Twitter utilizing AI-based aggressiveness analysis}, series = {Electronic Imaging}, volume = {35}, journal = {Electronic Imaging}, number = {3}, publisher = {Society for Imaging Science and Technology (IS\&T)}, doi = {10.2352/EI.2023.35.3.MOBMU-355}, pages = {355-1 -- 355-15}, year = {2023}, abstract = {Open-source intelligence is gaining popularity due to the rapid development of social networks. There is more and more information in the public domain. One of the most popular social networks is Twitter. It was chosen to analyze the dependence of changes in the number of likes, reposts, quotes and retweets on the aggressiveness of the post text for a separate profile, as this information can be important not only for the owner of the channel in the social network, but also for other studies that in some way influence user accounts and their behavior in the social network. Furthermore, this work includes a detailed analysis and evaluation of the Tweety library capabilities and situations in which it can be effectively applied. Lastly, this work includes the creation and description of a compiled neural network whose purpose is to predict changes in the number of likes, reposts, quotes, and retweets from the aggressiveness of the post text for a separate profile.}, language = {en} } @article{NarasimhanBhosalePervezetal.2023, author = {Narasimhan, Pranesh Kumar and Bhosale, Chinmay and Pervez, Muhammad Hasban and Naqvi, Najiba Zainab and Ecevit, Mert Ilhan and Schwarz, Klaus and Creutzburg, Reiner}, title = {Open-source Intelligence (OSINT) investigation in Facebook}, series = {Electronic Imaging}, volume = {35}, journal = {Electronic Imaging}, number = {3}, publisher = {Society for Imaging Science and Technology (IS\&T)}, doi = {10.2352/EI.2023.35.3.MOBMU-357}, pages = {357-1 -- 357-12}, year = {2023}, abstract = {Open Source Intelligence (OSINT) has come a long way, and it is still developing ideas, and lots of investigations are yet to happen in the near future. The main essential requirement for all the OSINT investigations is the information that is valuable data from a good source. This paper discusses various tools and methodologies related to Facebook data collection and analyzes part of the collected data. At the end of the paper, the reader will get a deep and clear insight into the available techniques, tools, and descriptions about tools that are present to scrape the data out of the Facebook platform and the types of investigations and analyses that the gathered data can do.}, language = {en} } @inproceedings{TetzlaffPurohitSpalleketal.2023, author = {Tetzlaff, Laura and Purohit, Anne-Maria and Spallek, Jacob and Holmberg, Christine and Schrader, Thomas}, title = {Evaluating Interoperability in German Critical Incident Reporting Systems}, series = {German Medical Data Sciences 2023 - Science. Close to People. Proceedings of the 68th Annual Meeting of the German Association of Medical Informatics, Biometry, and Epidemiology e.V. (gmds) 2023, Heilbronn, Germany}, booktitle = {German Medical Data Sciences 2023 - Science. Close to People. Proceedings of the 68th Annual Meeting of the German Association of Medical Informatics, Biometry, and Epidemiology e.V. (gmds) 2023, Heilbronn, Germany}, publisher = {IOS Press}, doi = {10.3233/SHTI230722}, pages = {249 -- 257}, year = {2023}, abstract = {In industrialised countries, one in ten patients suffers harm during hospitalization. Critical Incident Reporting Systems (CIRS) aim to minimize this by learning from errors and identifying potential risks. However, a lack of interoperability among the 16 CIRS in Germany hampers their effectiveness.}, language = {en} } @inproceedings{MarkgrafDietrichMuelleretal.2023, author = {Markgraf, Klaus and Dietrich, Benjamin and M{\"u}ller, Katja and Flassig, Robert and Flassig, Peter}, title = {FINEconcepts - Wissenstransfer und Energiesystemoptimierung mithilfe des digitalen Zwillings}, series = {NWK, HS Harz, 2023}, booktitle = {NWK, HS Harz, 2023}, publisher = {HS Harz}, pages = {428 -- 435}, year = {2023}, abstract = {Climate change, but also geopolitical circumstances, are moving topics such as energy efficiency and renewable energies more and more into the focus of the population, economy , and politics. As a result, the will to optimize new and existing energy systems extends from private individuals to companies and even entire communities. This work describes the development and usage of a new software called FINEconcepts which creates a digital twin of an energy system. This virtual model can then be used to optimize the energy system based on annual costs, CO2 emissions or other relevant criteria such as self-sufficiency. Because all system components, which include renewable technologies as well, can be added as a building block with chosen but changeable parameters, the software allows the user to explore and awaken interest and understanding of technologies that were previously considered too costly, irrelevant, or unrealistic. Implemented projects in small and large companies as well as in residential areas did prove, that the usage of FINEconcepts leads not only to more efficient energy systems by increasing the use of renewable energy, but also increased knowledge and understanding in terms of energy. Besides economics, ecology and security, understanding is an equally important factor in achieving a sustainable energy supply.}, language = {en} } @article{XuShimizuGuterdingetal.2023, author = {Xu, Han-Xiang and Shimizu, Makoto and Guterding, Daniel and Otsuki, Junya and Jeschke, Harald O.}, title = {Pressure evolution of electronic structure and magnetism in the layered van der Waals ferromagnet CrGeTe3}, series = {Physical Review B}, journal = {Physical Review B}, number = {Vol. 108}, publisher = {American Physical Society}, doi = {https://doi.org/10.1103/PhysRevB.108.125142}, pages = {15}, year = {2023}, abstract = {Layered van der Waals ferromagnets, which preserve their magnetic properties down to exfoliated monolayers, are fueling an abundance of fundamental research and nanoscale device demonstration. CrGeTe3 is a prime example of this class of materials. Its temperature-pressure phase diagram features an insulator-to-metal transition and a significant increase in ferromagnetic Curie-Weiss temperatures upon entering the metallic state. We use density functional theory to understand the magnetic exchange interactions in CrGeTe3 at ambient and elevated pressures. We calculate Heisenberg exchange couplings, which provide the correct ferromagnetic ground state and explain the experimentally observed pressure dependence of magnetism in CrGeTe3. Furthermore, we combine density functional theory with dynamical mean-field theory to investigate the effects of electronic correlations and the nature of the high-pressure metallic state in CrGeTe3.}, language = {en} } @misc{DasChaurasiaMandaletal.2023, author = {Das, Atanu and Chaurasia, Prashtan Kumar and Mandal, Gopi K. and Goecke, Sven-Frithjof and De, Amitava}, title = {Sample calculations to estimate joint distortion based on the published article "Analytical Estimation of Thermomechanical Distortion and Interface Layer Thickness for Gas Metal Arc Lap Joining of Dissimilar Sheets"}, year = {2023}, abstract = {A sample set of calculations is presented in this supplemental document to analytically estimate joint distortion for gas metal arc lap joining of aluminum and steel thin sheets following the published article "Analytical Estimation of Thermomechanical Distortion and Interface Layer Thickness for Gas Metal Arc Lap Joining of Dissimilar Sheets"}, language = {en} }