@inproceedings{Hoeft2016, author = {H{\"o}ft, Uwe}, title = {Neue Impulse f{\"u}r den Schieneng{\"u}terverkehr: Wie kann die Wettbewerbsf{\"a}higkeit des Schieneng{\"u}terverkehrs erh{\"o}ht werden}, series = {Bahntechnik Symposium 2016 : Schieneng{\"u}terverkehr, Kombinierter Verkehr und Bahn-Effizienz, Berlin, 24. - 25. Mai 2016}, booktitle = {Bahntechnik Symposium 2016 : Schieneng{\"u}terverkehr, Kombinierter Verkehr und Bahn-Effizienz, Berlin, 24. - 25. Mai 2016}, editor = {Schulz, Eckhard}, publisher = {Interdisziplin{\"a}rer Forschungsverbund Bahntechnik}, address = {Berlin}, isbn = {978-3-940727-52-7}, pages = {15 -- 25}, year = {2016}, language = {de} } @article{HildebrandMaroske2014, author = {Hildebrand, Wolf-Christian and Maroske, Matthias}, title = {Neupositionierung der Regionalgruppen - ein erfolgreicher neuer Start,}, series = {t\&m Technologie \& Management}, volume = {63}, journal = {t\&m Technologie \& Management}, number = {2}, pages = {21 -- 21}, year = {2014}, language = {de} } @article{GaoWuGoecke2018, author = {Gao, X. S. and Wu, Chuang-Song and Goecke, Sven-Frithjof}, title = {Numerical analysis of heat transfer and fluid flow characteristics and their influence on bead defects formation in oscillating laser-GMA hybrid welding of lap joints}, series = {The International Journal of Advanced Manufacturing Technology}, volume = {98}, journal = {The International Journal of Advanced Manufacturing Technology}, number = {1-4}, doi = {10.1007/s00170-018-2293-2}, pages = {523 -- 537}, year = {2018}, language = {en} } @misc{BoudnitskiEdel1998, author = {Boudnitski, Grigori and Edel, Karl-Otto}, title = {Oberfl{\"a}chendefekte im Scheibenbereich: Abschlußbericht zum DFG-Projekt}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:522-opus-193}, year = {1998}, abstract = {Im Rahmen des DFG-Schwerpunktprogramms „Systemdynamik und Langzeitverhalten von Fahrwerk, Gleis und Untergrund" wurde das Thema „Analyse und Bewertung des Verhaltens rißartiger Oberfl{\"a}chendefekte im Scheibenbereich von Eisenbahnvollr{\"a}dern mit den Metho-den der probabilistischen Bruchmechanik" behandelt. Der Abschlußbericht zu dem Projekt, das im Zeitraum von 1995 bis 1997 von der Deutschen Forschungsgemeinschaft gef{\"o}rdert wurde, ist an der Fachhochschule in Brandenburg an der Havel im April 1998 fertiggestellt worden. Wiederverwendbare Eisenbahnvollr{\"a}der von G{\"u}terwagen, die aus dem Vollradstahl BV1 her-gestellt wurden, zeigen in einigen F{\"a}llen das Vorhandensein von Oberfl{\"a}chenfehlern in Form von {\"U}berwalzungen im Bereich der Radscheibe. Analysiert und bewertet wurde im Interesse der Betriebssicherheit das Dauerfestigkeitsverhalten sowie das Rißwachstumsverhalten von Erm{\"u}dungsrissen, die von solchen {\"U}berwalzungen ausgehen. Um den Einfluß der Streubreite der wesentlichen Parameter der Beanspruchung und der Beanspruchbarkeit auf die Dauerfes-tigkeit und die zyklische Rißausbreitung erfassen und die f{\"u}r die Betriebssicherheit erforderli-chen zul{\"a}ssigen Riß- bzw. Defektgr{\"o}ßen festlegen zu k{\"o}nnen, sind die bruchmechanischen Analysen als Monte-Carlo-Simulation gestaltet worden. Ziel der Analysen war es, zul{\"a}ssige Defektgr{\"o}ßen f{\"u}r die zerst{\"o}rungsfreie Bauteilpr{\"u}fung bei Gew{\"a}hrleistung der Dauerfestigkeit der mit {\"U}berwalzungen behafteten Vollr{\"a}der auf wissenschaftlich fundierter Basis abzuleiten, da praktische Erfahrungen mit derartigen Defekten nicht vorlagen.}, subject = {Eisenbahn ; Fahrwerk ; Werkstoffkunde ; Besch{\"a}digung ; Bruchmechanik}, language = {de} } @article{SchenkKraskaRichardson2010, author = {Schenk, T. and Kraska, Martin and Richardson, I. M.}, title = {Onderzoek nieuws uit Delft. De invloed van opspannen modelleren}, series = {Lastechniek}, journal = {Lastechniek}, issn = {0023-8694}, pages = {42 -- 45}, year = {2010}, language = {nl} } @inproceedings{LoeweWidiputriLoeher2010, author = {L{\"o}we, Katharina and Widiputri, D. I. and L{\"o}her, H.-J.}, title = {Optimised Control System Design through Operator Action Analysis}, series = {Loss prevention and safety promotion in the process industries : proceedings of the 13th International Symposium, Brugge, Belgium, June 6 - 9, 2010 ; 676th Event of the EFCE Working Party on Loss Prevention / ed. by G. Suter ...}, booktitle = {Loss prevention and safety promotion in the process industries : proceedings of the 13th International Symposium, Brugge, Belgium, June 6 - 9, 2010 ; 676th Event of the EFCE Working Party on Loss Prevention / ed. by G. Suter ...}, publisher = {Technologisch Instituut vzw}, address = {Antwerpen}, isbn = {978-90-76019-29-1}, year = {2010}, language = {en} } @misc{HempelOertel2014, author = {Hempel, J. and Oertel, Christian}, title = {Parameter Optimization of Finite Element Tire Models}, year = {2014}, language = {en} } @article{HempelOertel2016, author = {Hempel, J. and Oertel, Christian}, title = {Parameter Optimization of Finite element tiremodels}, series = {Kautschuk, Gummi, Kunststoffe : KGK}, volume = {69}, journal = {Kautschuk, Gummi, Kunststoffe : KGK}, number = {4}, pages = {24 -- 29}, year = {2016}, language = {en} } @misc{EbertSpiegelGoeckeRethmeier2014, author = {Ebert-Spiegel, M. and Goecke, Sven-Frithjof and Rethmeier, M.}, title = {Possibilities for compensating a higher heat input, in particular by the torch off set relative to the top sheet at the fillet weld on a lap joint}, year = {2014}, language = {en} } @article{EbertSpiegelGoeckeRethmeier2015, author = {Ebert-Spiegel, Michael and Goecke, Sven-Frithjof and Rethmeier, Michael}, title = {Possibilities for compensating a higher heat input, in particular by the torch offset relative to the top sheet at the fillet weld on a lap joint}, series = {Welding in the World}, volume = {59}, journal = {Welding in the World}, number = {3}, doi = {10.1007/s40194-015-0220-9}, pages = {443 -- 453}, year = {2015}, language = {en} } @misc{LoeweDalijono2012, author = {L{\"o}we, Katharina and Dalijono, Taufan}, title = {Practical Tool for Human Factor Analysis}, year = {2012}, language = {en} } @article{GoeckeSyedEbertSpiegeletal.2013, author = {Goecke, Sven-Frithjof and Syed, Arshad Alam and Ebert-Spiegel, Michael and De, Amitava}, title = {Probing current, voltage and metal transfer characteristics in pulsed arc and in conventional and a novel low energy input short arc GMAW}, series = {Quarterly Journal of the Japan Welding Society}, volume = {31}, journal = {Quarterly Journal of the Japan Welding Society}, number = {4}, doi = {10.2207/qjjws.31.26s}, pages = {26s -- 30s}, year = {2013}, language = {en} } @article{GoeckeMakwanaShomeetal.2019, author = {Goecke, Sven-Frithjof and Makwana, Pinaac and Shome, Mahadev and De, Amitava}, title = {Probing joint strength and distortion in gas metal arc lap joining of aluminum and steel sheets}, series = {Welding in the World}, volume = {63}, journal = {Welding in the World}, number = {2}, publisher = {Springer}, doi = {10.1007/s40194-018-0653-z}, pages = {229 -- 236}, year = {2019}, language = {en} } @inproceedings{KnoblochSlomczyk2014, author = {Knobloch, Florian and Slomczyk, Sebastian}, title = {Pulsfrequenzmodulierte Visible Light Communication f{\"u}r vernetzte LED Beleuchtung}, series = {4. Elektronik lighting congress 2014, M{\"u}nchen, 27. Mai 2014,}, booktitle = {4. Elektronik lighting congress 2014, M{\"u}nchen, 27. Mai 2014,}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:522-opus4-8534}, pages = {7}, year = {2014}, abstract = {F{\"u}r individualisierte Beleuchtungen, bedarf es einer Kommunikation zwischen den Leuchten. Hierf{\"u}r kann LED-Licht genutzt werden. F{\"u}r die optische kabellose Kommunikation im sichtbaren Lichtbereich (bzw. Visible Light Communication - VLC) kann eine diskrete Pulsfrequenzmodulation (PFM) f{\"u}r den Einsatz mit indirektem Licht genutzt werden. Ein Konzept zur Pulsfrequenzmodu-lation (PFM) wird vorgestellt und experimentell analysiert. Aufbau und Funktionsweise der PFM werden anhand einer Simulation des Empf{\"a}ngers vorgestellt. Daran anschließend wird in der Sicherungsschicht das Listen Before Talk Verfahren zum koordinierten Kanalzugriff erl{\"a}utert.}, language = {de} } @article{MakwanaGoeckeDe2019, author = {Makwana, Pinaac and Goecke, Sven-Frithjof and De, Amitava}, title = {Real-time heat input monitoring towards robust GMA brazing}, series = {Science and Technology of Welding \& Joining}, volume = {24}, journal = {Science and Technology of Welding \& Joining}, number = {1}, publisher = {Taylor \& Francis}, doi = {10.1080/13621718.2018.1470290}, pages = {1 -- 11}, year = {2019}, language = {en} } @masterthesis{Schmidt2014, type = {Bachelor Thesis}, author = {Schmidt, Norman}, title = {R{\"u}ckgewinnung der Frequenzinformation aus PWM-modulierten Licht zur Anwendung f{\"u}r die Visible Light Communication (VLC)}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:522-opus4-8590}, school = {Technische Hochschule Brandenburg}, pages = {90}, year = {2014}, abstract = {Gegenstand dieser Arbeit, ist die R{\"u}ckgewinnung von Frequenzinformationen aus pulsweitenmoduliertem Licht. Einleitend wird auf das zu bearbeitende Thema eingegangen. Anschließend werden die Grundlagen erl{\"a}utert, welche f{\"u}r das Verst{\"a}ndnis der Arbeit notwendig sind. Dem folgt ein Entwurf mit mehreren M{\"o}glichkeiten zur Herleitung eines Satzes von PWM-Frequenzen. Danach wird auf Grundlage der PWM-Frequenzen, eine Simulation f{\"u}r die Frequenzr{\"u}ckgewinnung durchgef{\"u}hrt.}, language = {de} } @misc{KraskaMckeprang2003, author = {Kraska, Martin and Mckeprang, J{\"u}rgen}, title = {Seilgef{\"u}hrter Auftriebsk{\"o}rper}, year = {2003}, language = {de} } @article{LuebckeBraenzelDehlingeretal.2019, author = {L{\"u}bcke, Andrea and Braenzel, Julia and Dehlinger, Aurelie and Schn{\"u}rer, Matthias and Stiel, Holger and Guttmann, Peter and Rehbein, Stefan and Schneider, Gerd and Werner, Stephan and Kemmler, Roman and Ritter, Sebastian and Raugust, Marc and Wende, Torsten and Behrendt, Marcel and Regehly, Martin}, title = {Soft X-ray nanoscale imaging using a sub-pixel resolution charge coupled device (CCD) camera}, series = {Review of Scientific Instruments}, volume = {90}, journal = {Review of Scientific Instruments}, number = {4}, publisher = {American Institute of Physics}, doi = {10.1063/1.5053593}, year = {2019}, language = {en} } @inproceedings{ThiersSchraderOrlowski2012, author = {Thiers, Angelina and Schrader, Thomas and Orlowski, Katja}, title = {Sportanalyse mittels Shimmer™-Sensoren}, series = {13. Nachwuchswissenschaftlerkonferenz mitteldeutscher Fachhochschulen, Hochschule Zittau/G{\"o}rlitz, in G{\"o}rlitz am 19. April 2012, Tagungsband}, booktitle = {13. Nachwuchswissenschaftlerkonferenz mitteldeutscher Fachhochschulen, Hochschule Zittau/G{\"o}rlitz, in G{\"o}rlitz am 19. April 2012, Tagungsband}, editor = {Honekamp, Wilfried}, publisher = {Re Di Roma-Verlag}, address = {Remscheid}, isbn = {978-3-86870-436-5}, pages = {275 -- 280}, year = {2012}, language = {de} } @article{RudenkoGaponenkoLitvinovetal.2020, author = {Rudenko, Maryia and Gaponenko, Nikolai and Litvinov, Vladimir and Ermachikhin, Alexander and Chubenko, Eugene and Borisenko, Victor and Mukhin, Nikolay and Radyush, Yuriy and Tumarkin, Andrey and Gagarin, Alexander}, title = {Structural Dependent Eu3+ Luminescence, Photoelectric and Hysteresis Effects in Porous Strontium Titanate}, series = {Materials}, volume = {13}, journal = {Materials}, number = {24}, publisher = {MDPI}, doi = {10.3390/ma13245767}, year = {2020}, language = {en} } @article{OertelLiuZhouetal.2018, author = {Oertel, Christian and Liu, Zhe and Zhou, Fuqiang and Wei, Yintao}, title = {Three-dimensional vibration of a ring with a noncircular cross-section on an elastic foundation}, series = {Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science}, volume = {232}, journal = {Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science}, number = {13}, doi = {10.1177/0954406217720823}, pages = {2381 -- 2393}, year = {2018}, language = {en} } @article{OertelHempel2014, author = {Oertel, Christian and Hempel, J.}, title = {Tire Model Toolbox. University Focus}, series = {Tire technology international}, journal = {Tire technology international}, issn = {1462-4729}, pages = {62 -- 65}, year = {2014}, language = {en} } @inproceedings{SteinfurthWundrichKindsmueller2016, author = {Steinfurth, Maximilian and Wundrich, Ingo and Kindsm{\"u}ller, Martin Christof}, title = {TouchEEG: Eine MultitouchAnwendung f{\"u}r die EEG-Auswertung}, series = {Mensch und Computer 2016 - Tagungsband, 4. - 7. September, Aachen}, booktitle = {Mensch und Computer 2016 - Tagungsband, 4. - 7. September, Aachen}, editor = {Prinz, Wolfgang}, publisher = {Gesellschaft f{\"u}r Informatik e.V.}, address = {Aachen}, doi = {10.18420/muc2016-mci-0115}, pages = {10}, year = {2016}, language = {de} } @inproceedings{GoeckeEbertSpiegel2015, author = {Goecke, Sven-Frithjof and Ebert-Spiegel, Michael}, title = {Towards a More Robust Automated MAG Welding}, series = {2015 IEEE International Conference on Automation Science and Engineering (CASE) : 24 - 28 Aug. 2015, Gothenburg, Sweden}, booktitle = {2015 IEEE International Conference on Automation Science and Engineering (CASE) : 24 - 28 Aug. 2015, Gothenburg, Sweden}, publisher = {IEEE}, address = {Piscataway, NJ}, doi = {10.1109/coase.2015.7294114}, pages = {417 -- 418}, year = {2015}, language = {en} } @inproceedings{WikarskiAurahEbingaOsoreetal.2021, author = {Wikarski, Dietmar and Aurah, Catherine and Ebinga Osore, Emmanuel and Mengich, Gladys and Mutua, Gershom and Ndiema, Alice and Nkangi, Felister Nyaera and Ogemah, Vitalis and Okoth, Patrick and Ondulo, Jasper and Orata Omoto, Francis and Wambui Mwangi, Mary and Namayi, Vivian and Flassig, Peter and Loose, Harald and Malessa, Reiner and Piorr, Hans-Peter and Schrader, Thomas and Weber, Christian-Toralf}, title = {Towards Practice-oriented Higher Education for Sustainable Rural Development in Western Kenya}, editor = {Wikarski, Dietmar}, edition = {1st edition}, publisher = {Technische Hochschule Brandenburg}, address = {Brandenburg an der Havel}, organization = {Technische Hochschule Brandenburg}, doi = {10.25933/opus4-2742}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:522-opus4-27420}, year = {2021}, abstract = {The workshop proceedings contain the written versions of the presentations of the Kenyan participants of the final workshop of the DAAD-funded cooperation project "Practice-oriented Higher Education in Western Kenya" (ProUniEdu-WeK) in August 2021 at the Brandenburg University of Applied Sciences (THB). The contributions give an impression of what has been achieved in the last years on the way to practice-oriented higher education in the participating departments of the Masinde Muliro University of Science and Technology (MMUST) in cooperation with its partners from the THB and what is planned to be done in the years to come.}, language = {en} } @inproceedings{Kraska2015, author = {Kraska, Martin}, title = {Transferangebote zum Leichtbau aus Forschung und Lehre an der Fachhochschule Brandenburg}, series = {Metalldialog Ostbrandenburg in Eisenh{\"u}ttenstadt - "Metall trifft Leichtbau", 17.09.2015}, booktitle = {Metalldialog Ostbrandenburg in Eisenh{\"u}ttenstadt - "Metall trifft Leichtbau", 17.09.2015}, year = {2015}, language = {de} } @article{OertelWei2012, author = {Oertel, Christian and Wei, Yintao}, title = {Tyre rolling kinematics and prediction of tyre forces and moments: part I - theory and method}, series = {In: Vehicle system dynamics 50 (2012) 11, 1673-1687}, journal = {In: Vehicle system dynamics 50 (2012) 11, 1673-1687}, doi = {10.1080/00423114.2012.694452}, pages = {1673 -- 1687}, year = {2012}, abstract = {A new method to describe tyre rolling kinematics and how to calculate tyre forces and moments is presented. The Lagrange-Euler method is used to calculate the velocity and contact deformation of a tyre structure under large deformation. The calculation of structure deformation is based on the Lagrange method, while the Euler method is used to analyse the deformation and forces in the contact area. The method to predict tyre forces and moments is built using kinematic theory and nonlinear finite element analysis. A detailed analysis of the tyre tangential contact velocity and the relationships between contact forces, contact areas, lateral forces, and yaw and camber angles has been performed for specific tyres. Research on the parametric sensitivity of tyre lateral forces and self-aligning torque on tread stiffness and friction coefficients is carried out in the second part of this paper.}, language = {en} } @article{WeiOertelShena2012, author = {Wei, Yintao and Oertel, Christian and Shena, Xiaoliang}, title = {Tyre rolling kinematics and prediction of tyre forces and moments: part II - simulation and experiment}, series = {In: Vehicle system dynamics 50 (2012) 11, 1689-1706}, journal = {In: Vehicle system dynamics 50 (2012) 11, 1689-1706}, doi = {10.1080/00423114.2012.694453}, pages = {1689 -- 1706}, year = {2012}, abstract = {There are two aims for the second part of this paper: verifying the theory presented in the first part through parameter variation and comparison between simulation and experiment, and to study the effect of the belt structure on the cornering properties of radial tyres. Research has been carried out with a passenger car radial tyre and two different kinds of truck or bus radial tyres using both simulation and experiment. This second part of the paper shows that belt structure plays an important role in the generation of tyre forces and moments in addition to the effects of the tread stiffness and friction coefficients. The theory and method presented in this paper opens a new robust way to predict the tyre forces and moments from the tyre design and provides a reliable model for a generation mechanism.}, language = {en} } @incollection{WienekeToutaouiSchmuetzFritz2018, author = {Wieneke-Toutaoui, Burghilde and Schm{\"u}tz, J{\"o}rg and Fritz, Alfred Herbert}, title = {Urformen}, series = {Fertigungstechnik}, booktitle = {Fertigungstechnik}, edition = {12}, publisher = {Springer Vieweg}, address = {Berlin / Heidelberg}, isbn = {978-3-662-56534-6}, doi = {10.1007/978-3-662-56535-3_2}, publisher = {Technische Hochschule Brandenburg}, pages = {7 -- 132}, year = {2018}, language = {de} } @misc{KraskaHoenlRathmann2014, author = {Kraska, Martin and H{\"o}nl, Fabian and Rathmann, Jan}, title = {Verfahren und Anordnung zum zerst{\"o}rungsfreien Pr{\"u}fen von F{\"u}geverbindungen und Materialdefekten in Bauteilen mittels Induktions-Thermografie}, year = {2014}, language = {de} } @misc{KraskaHoenlRathmann2014, author = {Kraska, Martin and H{\"o}nl, Fabian and Rathmann, Jan}, title = {Verfahren zur zerst{\"o}rungsfreien Pr{\"u}fung einer F{\"u}geverbindung eines Bauteils mittels Induktions-Thermografie und Anordnung zur Durchf{\"u}hrung des Verfahrens}, year = {2014}, language = {de} } @inproceedings{Goecke2014, author = {Goecke, Sven-Frithjof}, title = {Visualisation and Control of the Heat Input in MAG Welding of Ultra-High-Strength Manganese-Boron Steels}, series = {Visual-JW 2014, November 26-28th, Proceedings of the International Symposium on Visualization in Joining \& Welding Science through Advanced Measurements and Simulation, 28-30 November, Joining and Welding Research Institute - JWRI, Osaka University 2014, Osaka, Japan, (2014); JWP-15}, booktitle = {Visual-JW 2014, November 26-28th, Proceedings of the International Symposium on Visualization in Joining \& Welding Science through Advanced Measurements and Simulation, 28-30 November, Joining and Welding Research Institute - JWRI, Osaka University 2014, Osaka, Japan, (2014); JWP-15}, pages = {35 -- 36}, year = {2014}, language = {en} } @misc{Kraska2014, author = {Kraska, Martin}, title = {Werkstoff- und Strukturmechanik an der Fachhochschule Brandenburg}, year = {2014}, language = {de} } @misc{Kraska2016, author = {Kraska, Martin}, title = {Werkstofflehre im Bereich Maschinenbau - Beispiel der Technischen Hochschule Brandenburg}, year = {2016}, language = {de} } @article{MakwanaShomeGoeckeetal.2017, author = {Makwana, Pinaac and Shome, Mahadev and Goecke, Sven-Frithjof and De, Amitava}, title = {Wetting length in gas metal arc brazing of galvanised steel}, series = {Science and Technology of Welding \& Joining}, volume = {22}, journal = {Science and Technology of Welding \& Joining}, number = {2}, doi = {10.1080/13621718.2016.1207289}, pages = {1 -- 4}, year = {2017}, language = {en} } @article{RegehlyGarmshausenReuteretal.2020, author = {Regehly, Martin and Garmshausen, Yves and Reuter, Marcus and K{\"o}nig, Niklas F. and Israel, Eric and Kelly, Damian P. and Chou, Chun-Yu and Koch, Klaas and Asfari, Baraa and Hecht, Stefan}, title = {Xolography for linear volumetric 3D printing}, series = {Nature}, volume = {588}, journal = {Nature}, publisher = {Nature Research}, doi = {10.1038/s41586-020-3029-7}, pages = {620 -- 624}, year = {2020}, language = {en} }