@misc{SchnitzerEdel2006, author = {Schnitzer, Thomas and Edel, Karl-Otto}, title = {Fracture mechanical analysis and assessment of the extension of rolling contact fatigue cracks in railway rails}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:522-opus-69}, year = {2006}, abstract = {Rolling contact fatigue generates cracks on the running surface of high strength railway rails which grow under a small angle into the rail head. These cracks can cause in its last stage the fracturing of the rail. The crack extension behaviour is - as the origin of these cracks too - influenced by the cold working of the rail steel. The crack growth in the first stage is fracture mechanically analyzed by means of two-dimensional modelling. The simulation results are assessed for the use of rail grinding. A criterion for the change of the crack growth direction could not be derived, but the following stages of the crack growth in the transverse direction and the final fracture and the conditions for secondary fractures are considered. Rolling contact fatigue generates cracks on the running surface of high strength railway rails which grow under a small angle into the rail head. These cracks can cause in its last stage the fracturing of the rail. The crack extension behaviour is - as the origin of these cracks too - influenced by the cold working of the rail steel. The crack growth in the first stage is fracture mechanically analyzed by means of two-dimensional modelling. The simulation results are assessed for the use of rail grinding. A criterion for the change of the crack growth direction could not be derived, but the following stages of the crack growth in the transverse direction and the final fracture and the conditions for secondary fractures are considered.}, subject = {Eisenbahnschiene}, language = {en} } @inproceedings{EdelBoudnitski1997, author = {Edel, Karl-Otto and Boudnitski, Grigori}, title = {Fracture mechanical analysis of railway wheels with rolling defects}, series = {Fatigue design of components :this volume represents a selection of papers presented at the Second International Symposium on Fatigue Design, FD' 95, held in Helsinki, Finland on 5 - 8 September, 1995}, booktitle = {Fatigue design of components :this volume represents a selection of papers presented at the Second International Symposium on Fatigue Design, FD' 95, held in Helsinki, Finland on 5 - 8 September, 1995}, editor = {Marquis, Gary B.}, publisher = {Elsevier}, address = {Amsterdam ; New York}, isbn = {0-08-043318-9}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:522-opus-204}, year = {1997}, abstract = {Reusable solid wheels manufactured of the old steel BV1 (nearly equivalent to the solid or monobloc wheel steel R1 according to the new nomenclature) show in some cases rolling defects on the surface of the wheel disc. The fatigue behaviour of such defects is analysed by means of the linear-elastic fracture mechanics and Monte Carlo simulation and assessed to be able to derive the allowable defect size for the non-destructive testing. This paper was firstly presented at the Second International Symposium on Fatigue Design FD'95, held in Helsinki (Finland) on 5 - 8 September 1995. The complete research report is published under the title „Oberfl{\"a}chendefekte im Scheibenbereich" (Manufacturing surface defects in the disc area of solid wheels). The research work was sponsored by the Deutsche Forschungsgemeinschaft (DFG).}, subject = {Eisenbahn ; Fahrwerk ; Besch{\"a}digung ; Bruchmechanik}, language = {en} } @article{OertelWei2012, author = {Oertel, Christian and Wei, Yintao}, title = {Tyre rolling kinematics and prediction of tyre forces and moments: part I - theory and method}, series = {In: Vehicle system dynamics 50 (2012) 11, 1673-1687}, journal = {In: Vehicle system dynamics 50 (2012) 11, 1673-1687}, doi = {10.1080/00423114.2012.694452}, pages = {1673 -- 1687}, year = {2012}, abstract = {A new method to describe tyre rolling kinematics and how to calculate tyre forces and moments is presented. The Lagrange-Euler method is used to calculate the velocity and contact deformation of a tyre structure under large deformation. The calculation of structure deformation is based on the Lagrange method, while the Euler method is used to analyse the deformation and forces in the contact area. The method to predict tyre forces and moments is built using kinematic theory and nonlinear finite element analysis. A detailed analysis of the tyre tangential contact velocity and the relationships between contact forces, contact areas, lateral forces, and yaw and camber angles has been performed for specific tyres. Research on the parametric sensitivity of tyre lateral forces and self-aligning torque on tread stiffness and friction coefficients is carried out in the second part of this paper.}, language = {en} } @article{WeiOertelShena2012, author = {Wei, Yintao and Oertel, Christian and Shena, Xiaoliang}, title = {Tyre rolling kinematics and prediction of tyre forces and moments: part II - simulation and experiment}, series = {In: Vehicle system dynamics 50 (2012) 11, 1689-1706}, journal = {In: Vehicle system dynamics 50 (2012) 11, 1689-1706}, doi = {10.1080/00423114.2012.694453}, pages = {1689 -- 1706}, year = {2012}, abstract = {There are two aims for the second part of this paper: verifying the theory presented in the first part through parameter variation and comparison between simulation and experiment, and to study the effect of the belt structure on the cornering properties of radial tyres. Research has been carried out with a passenger car radial tyre and two different kinds of truck or bus radial tyres using both simulation and experiment. This second part of the paper shows that belt structure plays an important role in the generation of tyre forces and moments in addition to the effects of the tread stiffness and friction coefficients. The theory and method presented in this paper opens a new robust way to predict the tyre forces and moments from the tyre design and provides a reliable model for a generation mechanism.}, language = {en} } @article{RoseZaehrSchnicketal.2011, author = {Rose, Sascha and Z{\"a}hr, Julia and Schnick, Michael and F{\"u}ssel, Uwe and Goecke, Sven-Frithjof and H{\"u}bner, Mark}, title = {Arc attachments on aluminium during tungsten electrode positive polarity in TIG welding of aluminium}, series = {In: Welding in the World 55 (2011) 9-10, pp 91-99}, volume = {55}, journal = {In: Welding in the World 55 (2011) 9-10, pp 91-99}, number = {9-10}, issn = {1878-6669}, doi = {10.1007/bf03321325}, pages = {91 -- 99}, year = {2011}, abstract = {In modem AC power sources, both balance and current of EP (tungsten electrode positive) and EN (tungsten electrode negative) can be readily adjusted. According to conventional assumptions the surface of aluminium workpieces is cleaned during EP but the tungsten electrode is more heated due to electron work function. During EN the tungsten electrode cools down and the workpiece is melted. Therefore, optimal settings of the power source mostly aim for maximal penetration and minimal electrode wear. This paper presents a study of arc attachments in TIG welding on aluminium. Two different arc attachments to the cathodic workpiece could be attested with only one of them actually cleaning the surface. The first one is a spot mode (highly dynamic) that attaches to the edges of oxide layers and cracks them. The second one is also a spot mode, but it attaches to weld pools. It does not clean the surface but heats the base material intensively. Both arc attachment modes compete against each other. As a result, the cleaning area narrows with wider weld pools due to an increasing attachment to the weld pool during EP. The influences on the arc attachment to the aluminium cathode as well as the contradictions in present literature are discussed. Possible adjustments of the AC balance for optimized processes are proposed.}, language = {en} } @inproceedings{LoeweWidiputriLoeher2010, author = {L{\"o}we, Katharina and Widiputri, D. I. and L{\"o}her, H.-J.}, title = {Optimised Control System Design through Operator Action Analysis}, series = {Loss prevention and safety promotion in the process industries : proceedings of the 13th International Symposium, Brugge, Belgium, June 6 - 9, 2010 ; 676th Event of the EFCE Working Party on Loss Prevention / ed. by G. Suter ...}, booktitle = {Loss prevention and safety promotion in the process industries : proceedings of the 13th International Symposium, Brugge, Belgium, June 6 - 9, 2010 ; 676th Event of the EFCE Working Party on Loss Prevention / ed. by G. Suter ...}, publisher = {Technologisch Instituut vzw}, address = {Antwerpen}, isbn = {978-90-76019-29-1}, year = {2010}, language = {en} } @inproceedings{LoeweWidiputri2011, author = {L{\"o}we, Katharina and Widiputri, D. I.}, title = {Considering Human Factors in Alarm Management Systems}, series = {8th European Congress of Chemical Engineering together with ProcessNet-Annual Meeting 25 - 29 September 2011, Berlin}, booktitle = {8th European Congress of Chemical Engineering together with ProcessNet-Annual Meeting 25 - 29 September 2011, Berlin}, year = {2011}, language = {en} } @inproceedings{LoeweDalijono2012, author = {L{\"o}we, Katharina and Dalijono, T.}, title = {Human Factors Analysis in the Process Industries}, series = {In: Proceedings of the 30th European Annual Conference on Human Decision Making and Manual Control September 11 and 12, 2012, DLR, Braunschweig}, booktitle = {In: Proceedings of the 30th European Annual Conference on Human Decision Making and Manual Control September 11 and 12, 2012, DLR, Braunschweig}, publisher = {Dt. Zentrum f{\"u}r Luft- und Raumfahrt, Inst. f{\"u}r Verkehrssystemtechnik}, address = {Braunschweig}, pages = {131 -- 136}, year = {2012}, language = {en} } @misc{Loewe2014, author = {L{\"o}we, Katharina}, title = {How to eliminate the sources of human errors to optimize human performance in a complex technical system}, year = {2014}, language = {en} } @misc{Loewe2013, author = {L{\"o}we, Katharina}, title = {German safety regulations and best practices to prevent accidents regarding the Gumi accident}, year = {2013}, language = {en} } @misc{LoeweDalijono2012, author = {L{\"o}we, Katharina and Dalijono, Taufan}, title = {Practical Tool for Human Factor Analysis}, year = {2012}, language = {en} } @inproceedings{KraskaJakobi2015, author = {Kraska, Martin and Jakobi, L.}, title = {Computer aided course of mechanics of materials}, series = {7th International Materials Education Symposium (Cambridge, April 9-10 2015)}, booktitle = {7th International Materials Education Symposium (Cambridge, April 9-10 2015)}, year = {2015}, language = {en} } @article{EbertSpiegelGoeckeRethmeier2014, author = {Ebert-Spiegel, M. and Goecke, Sven-Frithjof and Rethmeier, M.}, title = {Efficient gap filling in MAG welding using optical sensors}, series = {Welding in the World}, volume = {58}, journal = {Welding in the World}, number = {5}, issn = {0043-2288 (print)}, doi = {10.1007/s40194-014-0145-8}, pages = {637 -- 647}, year = {2014}, language = {en} } @inproceedings{Goecke2014, author = {Goecke, Sven-Frithjof}, title = {Visualisation and Control of the Heat Input in MAG Welding of Ultra-High-Strength Manganese-Boron Steels}, series = {Visual-JW 2014, November 26-28th, Proceedings of the International Symposium on Visualization in Joining \& Welding Science through Advanced Measurements and Simulation, 28-30 November, Joining and Welding Research Institute - JWRI, Osaka University 2014, Osaka, Japan, (2014); JWP-15}, booktitle = {Visual-JW 2014, November 26-28th, Proceedings of the International Symposium on Visualization in Joining \& Welding Science through Advanced Measurements and Simulation, 28-30 November, Joining and Welding Research Institute - JWRI, Osaka University 2014, Osaka, Japan, (2014); JWP-15}, pages = {35 -- 36}, year = {2014}, language = {en} } @inproceedings{MoellerKueglerKoetschauetal.2014, author = {M{\"o}ller, F. and K{\"u}gler, H. and K{\"o}tschau, S. and Geier, A. and Goecke, Sven-Frithjof}, title = {Gap Bridging Ability in Laser GMA Hybrid Welding of Thin 22MnB5 Sheets}, series = {Physics Procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014}, volume = {56}, booktitle = {Physics Procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014}, issn = {1875-3892 ; 1875-3884}, doi = {doi:10.1016/j.phpro.2014.08.052}, pages = {620 -- 629}, year = {2014}, language = {en} } @article{MuellerGoeckeRethmeier2014, author = {M{\"u}ller, A. and Goecke, Sven-Frithjof and Rethmeier, M.}, title = {Laser beam oscillation for fillet welding}, series = {Welding in the World}, volume = {58}, journal = {Welding in the World}, number = {6}, issn = {1878-6669 (online)}, doi = {10.1007/s40194-014-0165-4}, pages = {865 -- 872}, year = {2014}, language = {en} } @article{OertelHempel2014, author = {Oertel, Christian and Hempel, J.}, title = {Tire Model Toolbox. University Focus}, series = {Tire technology international}, journal = {Tire technology international}, issn = {1462-4729}, pages = {62 -- 65}, year = {2014}, language = {en} } @misc{LoeweDalijono2013, author = {L{\"o}we, Katharina and Dalijono, T.}, title = {Identify the Causes of Errors to Implement Accurate Improvements in High Automated Facilities of Process Industry - A Case Study}, year = {2013}, language = {en} } @misc{EbertSpiegelGoeckeRethmeier2014, author = {Ebert-Spiegel, M. and Goecke, Sven-Frithjof and Rethmeier, M.}, title = {Possibilities for compensating a higher heat input, in particular by the torch off set relative to the top sheet at the fillet weld on a lap joint}, year = {2014}, language = {en} } @misc{MuellerGoeckeRethmeier2014, author = {M{\"u}ller, A. and Goecke, Sven-Frithjof and Rethmeier, M.}, title = {Laser beam oscillation welding for automotive applications}, year = {2014}, language = {en} } @misc{HempelOertel2014, author = {Hempel, J. and Oertel, Christian}, title = {Parameter Optimization of Finite Element Tire Models}, year = {2014}, language = {en} } @article{YintaoOertelLietal.2017, author = {Yintao, Wei and Oertel, Christian and Li, Xuebing and Yu, Liangyao}, title = {A theoretical model for the tread slip and the effective rolling radius of the tyres in free rolling}, series = {Proceedings of the Institution of Mechanical Engineers : Part D, Journal of automobile engineering}, journal = {Proceedings of the Institution of Mechanical Engineers : Part D, Journal of automobile engineering}, publisher = {Sage Publ.}, address = {London}, doi = {10.1177/0954407016675227}, year = {2017}, language = {en} } @article{YintaoOertelLiuetal.2016, author = {Yintao, Wei and Oertel, Christian and Liu, Yahui and Li, Xuebing}, title = {A theoretical model of speed-dependent steering torque for rolling tyres}, series = {Vehicle System Dynamics}, volume = {4}, journal = {Vehicle System Dynamics}, issn = {0042-3114 (Print)}, doi = {10.1080/00423114.2015.1111391}, pages = {463 -- 473}, year = {2016}, language = {en} } @inproceedings{SigwarthLoeweBecketal.2015, author = {Sigwarth, Timo and L{\"o}we, Katharina and Beck, Eberhard and Pelchen, Lutz and Schrader, Thomas}, title = {Conceptual ontology of prospective risk analysis in medical environments - the OPT-Model-Ontology}, series = {2015 IEEE Seventh International Conference on Intelligent Computing and Information Systems (ICICIS'15) : Faculty of Commuter \& Information Sciences, Ain Shams University, Cairo, Egypt, 12-14 Dec. 2015}, booktitle = {2015 IEEE Seventh International Conference on Intelligent Computing and Information Systems (ICICIS'15) : Faculty of Commuter \& Information Sciences, Ain Shams University, Cairo, Egypt, 12-14 Dec. 2015}, publisher = {IEEE}, address = {Piscataway, NJ}, isbn = {978-1-5090-1950-2}, doi = {10.1109/IntelCIS.2015.7397202}, pages = {88 -- 93}, year = {2015}, language = {en} } @inproceedings{GoeckeKueglerBaumetal.2016, author = {Goecke, Sven-Frithjof and K{\"u}gler, H. and Baum, S. and Vollertsen, F.}, title = {Gap Bridging in Laser-GMA-Hybrid Welding of Boron Manganese UHSS}, series = {Proceedings of the The International Symposium on Visualization in Joining \& Welding Science through Advanced Measurements and Simulation, Visual-JW2016, October 17-18, 2016, Hotel Hankyu Expo Park, Osaka, Japan}, booktitle = {Proceedings of the The International Symposium on Visualization in Joining \& Welding Science through Advanced Measurements and Simulation, Visual-JW2016, October 17-18, 2016, Hotel Hankyu Expo Park, Osaka, Japan}, year = {2016}, language = {en} } @article{HempelOertel2016, author = {Hempel, J. and Oertel, Christian}, title = {Parameter Optimization of Finite element tiremodels}, series = {Kautschuk, Gummi, Kunststoffe : KGK}, volume = {69}, journal = {Kautschuk, Gummi, Kunststoffe : KGK}, number = {4}, pages = {24 -- 29}, year = {2016}, language = {en} } @inproceedings{OrlowskiLoose2012, author = {Orlowski, Katja and Loose, Harald}, title = {Low-cost Locomotion Sensors}, series = {13. Nachwuchswissenschaftlerkonferenz mitteldeutscher Fachhochschulen, Hochschule Zittau/G{\"o}rlitz, in G{\"o}rlitz am 19. April 2012, Tagungsband}, booktitle = {13. Nachwuchswissenschaftlerkonferenz mitteldeutscher Fachhochschulen, Hochschule Zittau/G{\"o}rlitz, in G{\"o}rlitz am 19. April 2012, Tagungsband}, editor = {Honekamp, Wilfried}, publisher = {Re Di Roma-Verlag}, address = {Remscheid}, isbn = {978-3-86870-436-5}, pages = {25 -- 30}, year = {2012}, language = {en} } @inproceedings{OrlowskiLooseOtteetal.2012, author = {Orlowski, Katja and Loose, Harald and Otte, Karen and Mansow-Model, Sebastian and Thiers, Angelina}, title = {Kinect and Shimmer Sensors in Motion Analysis in Health Applications}, series = {Biosignals 2012 : proceedings of the International Conference on Bio-inspired Systems and Signal Processing ; Vilamoura, Algarve, Portugal, 1 - 4 February 2012 ; [integrated in BIOSTEC (International Joint Conference on Biomedical Engineering Systems and Technologies)] / sponsored by INSTICC - Institute for Systems and Technologies of Information, Control and Communication. [Ed. by Sabine van Huffel ...]}, booktitle = {Biosignals 2012 : proceedings of the International Conference on Bio-inspired Systems and Signal Processing ; Vilamoura, Algarve, Portugal, 1 - 4 February 2012 ; [integrated in BIOSTEC (International Joint Conference on Biomedical Engineering Systems and Technologies)] / sponsored by INSTICC - Institute for Systems and Technologies of Information, Control and Communication. [Ed. by Sabine van Huffel ...]}, editor = {Huffel, Sabina van}, publisher = {SciTePress}, isbn = {978-989-8425-89-8}, pages = {226 -- 231}, year = {2012}, language = {en} } @inproceedings{GoeckeEbertSpiegel2015, author = {Goecke, Sven-Frithjof and Ebert-Spiegel, Michael}, title = {Towards a More Robust Automated MAG Welding}, series = {2015 IEEE International Conference on Automation Science and Engineering (CASE) : 24 - 28 Aug. 2015, Gothenburg, Sweden}, booktitle = {2015 IEEE International Conference on Automation Science and Engineering (CASE) : 24 - 28 Aug. 2015, Gothenburg, Sweden}, publisher = {IEEE}, address = {Piscataway, NJ}, doi = {10.1109/coase.2015.7294114}, pages = {417 -- 418}, year = {2015}, language = {en} } @article{DasShomeGoeckeetal.2015, author = {Das, Ashish and Shome, Mahadev and Goecke, Sven-Frithjof and De, Amitava and Das, C. R.}, title = {Joining of galvannealed steel and aluminium alloy using controlled short circuiting gas metal arc welding process}, series = {Science and Technology of Welding \& Joining}, volume = {20}, journal = {Science and Technology of Welding \& Joining}, number = {5}, doi = {10.1179/1362171815y.0000000032}, pages = {402 -- 408}, year = {2015}, language = {en} } @article{EbertSpiegelGoeckeRethmeier2015, author = {Ebert-Spiegel, Michael and Goecke, Sven-Frithjof and Rethmeier, Michael}, title = {Possibilities for compensating a higher heat input, in particular by the torch offset relative to the top sheet at the fillet weld on a lap joint}, series = {Welding in the World}, volume = {59}, journal = {Welding in the World}, number = {3}, doi = {10.1007/s40194-015-0220-9}, pages = {443 -- 453}, year = {2015}, language = {en} } @article{GoeckeSyedEbertSpiegeletal.2013, author = {Goecke, Sven-Frithjof and Syed, Arshad Alam and Ebert-Spiegel, Michael and De, Amitava}, title = {Probing current, voltage and metal transfer characteristics in pulsed arc and in conventional and a novel low energy input short arc GMAW}, series = {Quarterly Journal of the Japan Welding Society}, volume = {31}, journal = {Quarterly Journal of the Japan Welding Society}, number = {4}, doi = {10.2207/qjjws.31.26s}, pages = {26s -- 30s}, year = {2013}, language = {en} } @article{MakwanaShomeGoeckeetal.2018, author = {Makwana, Pinaac and Shome, Mahadev and Goecke, Sven-Frithjof and De, Amitava}, title = {Fast responsive control of current and voltage waveforms for gas metal arc brazing of thin zinc-coated steel sheets}, series = {Journal of Materials Processing Technology}, volume = {254}, journal = {Journal of Materials Processing Technology}, doi = {10.1016/j.jmatprotec.2017.11.028}, pages = {171 -- 178}, year = {2018}, language = {en} } @article{MakwanaShomeGoeckeetal.2017, author = {Makwana, Pinaac and Shome, Mahadev and Goecke, Sven-Frithjof and De, Amitava}, title = {Wetting length in gas metal arc brazing of galvanised steel}, series = {Science and Technology of Welding \& Joining}, volume = {22}, journal = {Science and Technology of Welding \& Joining}, number = {2}, doi = {10.1080/13621718.2016.1207289}, pages = {1 -- 4}, year = {2017}, language = {en} } @article{MakwanaShomeGoeckeetal.2016, author = {Makwana, Pinaac and Shome, Mahadev and Goecke, Sven-Frithjof and De, Amitava}, title = {Gas metal arc brazing of galvannealed steel sheets}, series = {Science and Technology of Welding \& Joining}, volume = {21}, journal = {Science and Technology of Welding \& Joining}, number = {7}, doi = {10.1080/13621718.2016.1145420}, pages = {1 -- 7}, year = {2016}, language = {en} } @article{MuellerGoeckeRethmeier2018, author = {M{\"u}ller, Alexander and Goecke, Sven-Frithjof and Rethmeier, Michael}, title = {Laser beam oscillation welding for automotive applications}, series = {Welding in the World}, volume = {62}, journal = {Welding in the World}, number = {5}, doi = {10.1007/s40194-018-0625-3}, pages = {1039 -- 1047}, year = {2018}, language = {en} } @article{GaoWuGoecke2018, author = {Gao, X. S. and Wu, Chuang-Song and Goecke, Sven-Frithjof}, title = {Numerical analysis of heat transfer and fluid flow characteristics and their influence on bead defects formation in oscillating laser-GMA hybrid welding of lap joints}, series = {The International Journal of Advanced Manufacturing Technology}, volume = {98}, journal = {The International Journal of Advanced Manufacturing Technology}, number = {1-4}, doi = {10.1007/s00170-018-2293-2}, pages = {523 -- 537}, year = {2018}, language = {en} } @article{ChenZhangJiangetal.2018, author = {Chen, Shujun and Zhang, Ruiying and Jiang, Fan and Goecke, Sven-Frithjof}, title = {A novel method for testing the electrical property of arc column in plasma arc welding}, series = {Welding in the World}, volume = {62}, journal = {Welding in the World}, number = {3}, doi = {10.1007/s40194-018-0561-2}, pages = {637 -- 645}, year = {2018}, language = {en} } @article{GaoWuGoeckeetal.2017, author = {Gao, X. S. and Wu, Chuan-Song and Goecke, Sven-Frithjof and Kuegler, H.}, title = {Effects of process parameters on weld bead defects in oscillating laser-GMA hybrid welding of lap joints}, series = {The International Journal of Advanced Manufacturing Technology}, volume = {93}, journal = {The International Journal of Advanced Manufacturing Technology}, number = {5-8}, doi = {10.1007/s00170-017-0637-y}, pages = {1877 -- 1892}, year = {2017}, language = {en} } @article{DasShomeGoeckeetal.2017, author = {Das, Ashish and Shome, Mahadev and Goecke, Sven-Frithjof and De, Amitava}, title = {Joining of aluminium alloy and galvanized steel using a controlled gas metal arc process}, series = {Journal of Manufacturing Processes}, volume = {27}, journal = {Journal of Manufacturing Processes}, doi = {10.1016/j.jmapro.2017.04.006}, pages = {179 -- 187}, year = {2017}, language = {en} } @article{LooseOrlowski2013, author = {Loose, Harald and Orlowski, Katja}, title = {Measurement of Human Locomotion: Evaluation of Low-Cost KINECT and SHIMMER Sensors}, series = {Solid State Phenomena}, volume = {198}, journal = {Solid State Phenomena}, doi = {10.4028/www.scientific.net/SSP.198.360}, pages = {360 -- 365}, year = {2013}, language = {en} } @article{LooseZasepaPierzchalaetal.2009, author = {Loose, Harald and Zasepa, Marcin and Pierzchala, Przemyslaw and Ritter, Robert}, title = {GPS Based Navigation of an Autonomous Mobile Vehicle}, series = {Solid State Phenomena}, volume = {147-149}, journal = {Solid State Phenomena}, doi = {10.4028/www.scientific.net/SSP.147-149.55}, pages = {55 -- 60}, year = {2009}, language = {en} } @article{Loose2010, author = {Loose, Harald}, title = {Mechatronics Engineering Programs at German Universities of Applied Sciences}, series = {Solid State Phenomena}, volume = {165}, journal = {Solid State Phenomena}, doi = {10.4028/www.scientific.net/SSP.165.419}, pages = {419 -- 424}, year = {2010}, language = {en} } @article{ZehnerSchweigerObeidietal.2010, author = {Zehner, Christian and Schweiger, Hans-Georg and Obeidi, Ossama and Komesker, Oliver and Raschke, Andre and Schiemann, Michael and Gehnen, Markus and Keller, Michael and Birke, Peter}, title = {Comparison of Several Methods for Determining the Internal Resistance of Lithium Ion Cells}, series = {Sensors}, volume = {10}, journal = {Sensors}, number = {6}, doi = {10.3390/s100605604}, pages = {5604 -- 5625}, year = {2010}, language = {en} } @article{OertelLiuZhouetal.2018, author = {Oertel, Christian and Liu, Zhe and Zhou, Fuqiang and Wei, Yintao}, title = {Three-dimensional vibration of a ring with a noncircular cross-section on an elastic foundation}, series = {Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science}, volume = {232}, journal = {Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science}, number = {13}, doi = {10.1177/0954406217720823}, pages = {2381 -- 2393}, year = {2018}, language = {en} } @article{WidjajaLoeweCosta2018, author = {Widjaja, Agnes S. N. and L{\"o}we, Katharina and Costa, Felipe Salerno}, title = {Design and simulation of a concentrated solar thermal system with an integrated concrete storage for continuous heat supply}, series = {Energy Procedia}, volume = {155}, journal = {Energy Procedia}, doi = {10.1016/j.egypro.2018.11.062}, pages = {121 -- 135}, year = {2018}, language = {en} } @article{KurachkinaKonshinaOseevetal.2018, author = {Kurachkina, Margarita and Konshina, Elena and Oseev, Aleksandr and Hirsch, S{\"o}ren}, title = {Hybrid structures based on gold nanoparticles and semiconductor quantum dots for biosensor applications}, series = {Nanotechnology Science and Applications}, volume = {11}, journal = {Nanotechnology Science and Applications}, doi = {10.2147/nsa.s155045}, pages = {15 -- 21}, year = {2018}, language = {en} } @article{LuebckeBraenzelDehlingeretal.2019, author = {L{\"u}bcke, Andrea and Braenzel, Julia and Dehlinger, Aurelie and Schn{\"u}rer, Matthias and Stiel, Holger and Guttmann, Peter and Rehbein, Stefan and Schneider, Gerd and Werner, Stephan and Kemmler, Roman and Ritter, Sebastian and Raugust, Marc and Wende, Torsten and Behrendt, Marcel and Regehly, Martin}, title = {Soft X-ray nanoscale imaging using a sub-pixel resolution charge coupled device (CCD) camera}, series = {Review of Scientific Instruments}, volume = {90}, journal = {Review of Scientific Instruments}, number = {4}, publisher = {American Institute of Physics}, doi = {10.1063/1.5053593}, year = {2019}, language = {en} } @article{GoeckeMakwanaShomeetal.2019, author = {Goecke, Sven-Frithjof and Makwana, Pinaac and Shome, Mahadev and De, Amitava}, title = {Probing joint strength and distortion in gas metal arc lap joining of aluminum and steel sheets}, series = {Welding in the World}, volume = {63}, journal = {Welding in the World}, number = {2}, publisher = {Springer}, doi = {10.1007/s40194-018-0653-z}, pages = {229 -- 236}, year = {2019}, language = {en} } @article{MakwanaGoeckeDe2019, author = {Makwana, Pinaac and Goecke, Sven-Frithjof and De, Amitava}, title = {Real-time heat input monitoring towards robust GMA brazing}, series = {Science and Technology of Welding \& Joining}, volume = {24}, journal = {Science and Technology of Welding \& Joining}, number = {1}, publisher = {Taylor \& Francis}, doi = {10.1080/13621718.2018.1470290}, pages = {1 -- 11}, year = {2019}, language = {en} }