@inproceedings{WildenBergmannDollesetal.2006, author = {Wilden, J. and Bergmann, J. P. and Dolles, M. and Reich, S. and Fernandet, S. and Goecke, Sven-Frithjof}, title = {Low temperature brazing of zinc coated steel and steel/aluminium joints by setting ZnAl-alloys as brazing material}, series = {In: Brazing and soldering : proceedings of the 3rd International Brazing and Soldering Conference, April 24 - 26, 2006, Crowne Plaza Riverwalk Hotel, San Antonio, Texas, USA / sponsored by ASM International, the Materials Information Society; AWS, [American Welding Society]. Ed. by John J. Stephens ... - Materials Park, Ohio: ASM Internat., 2006. - ISBN 0-87170-838-8}, booktitle = {In: Brazing and soldering : proceedings of the 3rd International Brazing and Soldering Conference, April 24 - 26, 2006, Crowne Plaza Riverwalk Hotel, San Antonio, Texas, USA / sponsored by ASM International, the Materials Information Society; AWS, [American Welding Society]. Ed. by John J. Stephens ... - Materials Park, Ohio: ASM Internat., 2006. - ISBN 0-87170-838-8}, pages = {32 -- 39}, year = {2006}, language = {en} } @inproceedings{GoeckeDorn2000, author = {Goecke, Sven-Frithjof and Dorn, L.}, title = {MAG-ChopArc-Schweißen f{\"u}r Feinblech gr{\"o}ßer gleich 0,2 mm}, series = {In: Schweißen und Schneiden 2000 : Vortr{\"a}ge der gleichnamigen Großen Schweißtechnischen Tagung in N{\"u}rnberg vom 27. bis 29. September 2000 / Veranst.: DVS, Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V.. - Als Ms. gedr. - D{\"u}sseldorf : Verl. f{\"u}r Schweißen und Verwandte Verfahren, DVS-Verl., 2000. - (DVS-Berichte ; 209). - ISBN 3-87155-667-X}, booktitle = {In: Schweißen und Schneiden 2000 : Vortr{\"a}ge der gleichnamigen Großen Schweißtechnischen Tagung in N{\"u}rnberg vom 27. bis 29. September 2000 / Veranst.: DVS, Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V.. - Als Ms. gedr. - D{\"u}sseldorf : Verl. f{\"u}r Schweißen und Verwandte Verfahren, DVS-Verl., 2000. - (DVS-Berichte ; 209). - ISBN 3-87155-667-X}, pages = {163 -- 168}, year = {2000}, language = {de} } @inproceedings{DornGoecke1997, author = {Dorn, L. and Goecke, Sven-Frithjof}, title = {Influence of least active gas additions on pulsed current MIG-welding of aluminium}, series = {In: Proceedings of the International Conference on the Joining of Materials JOM-8 : May 12 - 14, 1997, Helsing{\o}r, Denmark ; [optimization of joining technology for the industrial application, case study and repair welding, advanced welding technologies and developments] / ed. by the European Institute for the Joining of Materials. - Helsing{\o}r : JOM-Inst., 1997. - ISBN 87-89582-04-7}, booktitle = {In: Proceedings of the International Conference on the Joining of Materials JOM-8 : May 12 - 14, 1997, Helsing{\o}r, Denmark ; [optimization of joining technology for the industrial application, case study and repair welding, advanced welding technologies and developments] / ed. by the European Institute for the Joining of Materials. - Helsing{\o}r : JOM-Inst., 1997. - ISBN 87-89582-04-7}, pages = {100 -- 105}, year = {1997}, language = {en} } @article{RoseZaehrSchnicketal.2011, author = {Rose, Sascha and Z{\"a}hr, Julia and Schnick, Michael and F{\"u}ssel, Uwe and Goecke, Sven-Frithjof and H{\"u}bner, Mark}, title = {Arc attachments on aluminium during tungsten electrode positive polarity in TIG welding of aluminium}, series = {In: Welding in the World 55 (2011) 9-10, pp 91-99}, volume = {55}, journal = {In: Welding in the World 55 (2011) 9-10, pp 91-99}, number = {9-10}, issn = {1878-6669}, doi = {10.1007/bf03321325}, pages = {91 -- 99}, year = {2011}, abstract = {In modem AC power sources, both balance and current of EP (tungsten electrode positive) and EN (tungsten electrode negative) can be readily adjusted. According to conventional assumptions the surface of aluminium workpieces is cleaned during EP but the tungsten electrode is more heated due to electron work function. During EN the tungsten electrode cools down and the workpiece is melted. Therefore, optimal settings of the power source mostly aim for maximal penetration and minimal electrode wear. This paper presents a study of arc attachments in TIG welding on aluminium. Two different arc attachments to the cathodic workpiece could be attested with only one of them actually cleaning the surface. The first one is a spot mode (highly dynamic) that attaches to the edges of oxide layers and cracks them. The second one is also a spot mode, but it attaches to weld pools. It does not clean the surface but heats the base material intensively. Both arc attachment modes compete against each other. As a result, the cleaning area narrows with wider weld pools due to an increasing attachment to the weld pool during EP. The influences on the arc attachment to the aluminium cathode as well as the contradictions in present literature are discussed. Possible adjustments of the AC balance for optimized processes are proposed.}, language = {en} } @article{WildenJahnMelahinetal.2010, author = {Wilden, J. and Jahn, S. and Melahin, N. and Rehfeldt, L. and Luhn, T. and Goecke, Sven-Frithjof and Schmid, E. and Berger, U.}, title = {Brazing as the key to resource-efficient and energy-efficient joining in the product life cycle}, series = {In: Welding and cutting (2010) 5, 301-312}, journal = {In: Welding and cutting (2010) 5, 301-312}, issn = {1612-3433}, pages = {301 -- 312}, year = {2010}, language = {en} } @article{WildenJahnMilahinetal.2010, author = {Wilden, J. and Jahn, S. and Milahin, N. and Luhn, T. and Rehfeldt, L. and Goecke, Sven-Frithjof and Schmid, E. and Berger, U.}, title = {Perspektiven und Visionen zum Schweissen moderner Stahlwerkstoffe}, series = {In: Stahl und Eisen 130 (2010) 10, S. 71-75}, journal = {In: Stahl und Eisen 130 (2010) 10, S. 71-75}, issn = {0340-4803}, pages = {71 -- 75}, year = {2010}, language = {de} } @article{GhoshDornGoecke2001, author = {Ghosh, P. K. and Dorn, L. and Goecke, Sven-Frithjof}, title = {Universality of correlationships among pulse parameters for different MIG Welding Power Sources}, series = {In: The international journal for the joining of materials : JOM 13 (2001), 40-47}, journal = {In: The international journal for the joining of materials : JOM 13 (2001), 40-47}, issn = {0905-6866}, pages = {40 -- 47}, year = {2001}, language = {en} } @article{BergmannWildenReichetal.2009, author = {Bergmann, J. P. and Wilden, J. and Reich, S. and Goecke, Sven-Frithjof}, title = {Methods and solutions for joining plates made from different metals using voltaic arc welding}, series = {In: Welding International 23 (2009) 12, pp 895-903}, journal = {In: Welding International 23 (2009) 12, pp 895-903}, issn = {0950-7116}, doi = {10.1080/09507110902843289}, pages = {895 -- 903}, year = {2009}, abstract = {For some years now, the light engineering sector has been in search of welding and/or joining technologies allowing high-speed processing at low temperatures. This way, damage to galvanized coating, for example in the case of steels, could be avoided or significantly reduced. Damage to the galvanized coating represents an outwardly visible phenomenon that can have a negative impact on the component's corrosion resistance. On the other hand, from the metallurgical viewpoint, controlling heat input represents an important way to solve the problems associated with heat joining of metals with incomplete solid-state solubility. The formation of fragile intermetallic phases during cooling, for example, occurs with aluminium/steel or aluminium/titanium. The process and the correct choice of filler materials are key points for the success of the joining method. In the case of the combination of aluminium and steel, zinc represents a suitable filler material, for example for brazing. The melting temperature is around 420°C and the wettability, with regard to galvanized steel, is favoured by the zinc layer, while on the aluminium part, it is possible to avoid the use of flux, thanks to the activating action of the voltaic arc. However, the low melting and vaporization temperatures of zinc make even 'short arc' processing rather difficult. Only new developments in electrical sources for welding, and in particular new processes, offer the possibility of reducing the heat input by modifying the 'short arc' process. The difficulties described are also valid for the combination of titanium and aluminium, and are associated with the formation of phases such as Ti x A1 y . Again in this case, this paper will present a strategy for joining sheets less than 2 mm thick. In the past years, an increasing number of strategies to join zinc-coated steels can be observed. Brazing represents a profitable way to join zinc-coated steels at low temperatures, reducing or avoiding zinc evaporation. In order to completely avoid damaging zinc coating, the set of ZnAl-f{\`i}llers was already investigated for laser brazing of zinc-coated steels as well as for joining steel with aluminium. Furthermore, thanks to new developments in arc wire technology, ZnAl-electrodes can be used for MIG-brazing as well. In this case, the conventional short arc, which normally does not allow brazing with zinc wires as eruption-like evaporation occurs, is modified and controlled. The drop formation on the wire tip, the metal transfer, and the heat input can be controlled and modified very precisely, so that processing of filler material can be performed easily for thin sheets (till 0.8-1.5 mm) and at low-processing speed, below 0.3-0.4 m/min. The control of the heat input occurs due to abruptly reducing the current after short arc. The disadvantages connected with a lower heat input in the base material are a restricted wetting behaviour of the zinc pool on the base material and the low-brazing speed due to a very high cooling rate. The focus of the presented investigation is the development of strategies, in order to enhance process conditions for brazing sheets of zinc-coated steels and aluminium.}, language = {en} } @inproceedings{GoeckeWildenJahnetal.2008, author = {Goecke, Sven-Frithjof and Wilden, J. and Jahn, S. and Reich, S. and Fedtke, A. and Vollertsen, F. and Thomy, C.}, title = {Technologiekette zum Produzieren, Reparieren und Recyceln von Produkten in Material-Mix-Bauweise - PROREMIX}, series = {In: Die Verbindungs-Spezialisten 2008 : Vortr{\"a}ge und Posterbeitr{\"a}ge der Veranstaltung in Dresden vom 17. bis 19. September 2008 / Veranst.: DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V., D{\"u}sseldorf. - D{\"u}sseldorf : Verl. f{\"u}r Schweißen und Verwandte Verfahren, DVS-Verl., 2008. - (DVS-Berichte ; 250). - ISBN 978-3-87155-256-4}, booktitle = {In: Die Verbindungs-Spezialisten 2008 : Vortr{\"a}ge und Posterbeitr{\"a}ge der Veranstaltung in Dresden vom 17. bis 19. September 2008 / Veranst.: DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V., D{\"u}sseldorf. - D{\"u}sseldorf : Verl. f{\"u}r Schweißen und Verwandte Verfahren, DVS-Verl., 2008. - (DVS-Berichte ; 250). - ISBN 978-3-87155-256-4}, pages = {375 -- 378}, year = {2008}, language = {de} } @inproceedings{WildenBergmannReichetal.2007, author = {Wilden, J. and Bergmann, J. P. and Reich, S. and Neuw{\"o}hner, P. and Goecke, Sven-Frithjof}, title = {Grundlegende Untersuchungen zum flussmittelfreien L{\"o}ten von Leichtmetall-Material-Mix Konstruktionen}, series = {In: Hart- und Hochtemperaturl{\"o}ten und Diffusionsschweißen : Vortr{\"a}ge und Posterbeitr{\"a}ge des 8. internationalen Kolloquiums in Aachen vom 19. bis 21. Juni 2007. - D{\"u}sseldorf : DVS-Verl., 2007. - (DVS-Berichte ; 243). - ISBN 978-3-87155-799-6}, booktitle = {In: Hart- und Hochtemperaturl{\"o}ten und Diffusionsschweißen : Vortr{\"a}ge und Posterbeitr{\"a}ge des 8. internationalen Kolloquiums in Aachen vom 19. bis 21. Juni 2007. - D{\"u}sseldorf : DVS-Verl., 2007. - (DVS-Berichte ; 243). - ISBN 978-3-87155-799-6}, pages = {176 -- 182}, year = {2007}, language = {de} } @phdthesis{Goecke2005, author = {Goecke, Sven-Frithjof}, title = {Auswirkungen von Aktivgaszumischungen im vpm-Bereich zu Argon auf das MIG-Impulsschweißen von Aluminium}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:83-opus-7178}, school = {TU Berlin}, year = {2005}, abstract = {Die Auswirkungen von Stickstoff, Sauerstoff und Wasserstoffzumischungen im vpm-Bereich zu Argon auf das MIG-Impulsschweißen von Aluminium werden mittels mechanisch-technologischer Untersuchungen, der Hochgeschwindigkeitskinematografie und der Emissions-Spektroskopie ermittelt. Stickstoff- und Sauerstoffzumischungen bewirken bereits unter 0,1 \% eine erhebliche Erh{\"o}hung des Einbrands und eine Verringerung der Mikroporosit{\"a}t gegen{\"u}ber Reinargon, w{\"a}hrend durch Wasserstoffzumischung bis etwa 0,1 \% die Mikroporosit{\"a}t kaum beeinflusst wird. Aufgrund einer Erh{\"o}hung der Lichtbogenstabilit{\"a}t verbessert sich die Prozesssicherheit durch geringe molekulare Aktivgaszumischungen im Al-D{\"u}nnblechbereich. Metalldampf im Kernbereich des MSG-Lichtbogens f{\"u}hrt mit einer ausgepr{\"a}gten Str{\"o}mung in Richtung Schmelzbad zu einer K{\"u}hlung des Plasmas. Dabei erh{\"o}ht Stickstoff- und Sauerstoffzumischung den Metalldampfpartialdruck im Lichtbogenplasma und kontrahiert den Metalldampfstrahl. Verst{\"a}rkte Elektronenemission an der Kathodenoberfl{\"a}che durch hocherhitzte Metalloxide bzw. –nitride verbessert die elektrische Leitf{\"a}higkeit begleitet von einer Erh{\"o}hung des Plasma-Ionisierungsgrads.}, subject = {MIG; Schweißen; Gas; Aluminium; Magnesium; Spektroskopie; Plasma; Lichtbogen; Metalldampf}, language = {de} } @article{WildenJahnMelahinetal.2010, author = {Wilden, Johannes and Jahn, Simon and Melahin, Natalie and Rehfeldt, Lars and Luhn, Thomas and Goecke, Sven-Frithjof and Schmid, Eberhard and Berger, Uwe}, title = {L{\"o}ten als Schl{\"u}ssel zum ressourcen- und energieeffizienten F{\"u}gen im Produktlebenszyklus}, series = {In: Schweissen und Schneiden 62 (2010) 5, 264-277}, journal = {In: Schweissen und Schneiden 62 (2010) 5, 264-277}, pages = {264 -- 277}, year = {2010}, abstract = {Der Einsatz von L{\"o}tverfahren zum F{\"u}gen reduziert gegen{\"u}ber der Schweißtechnik die Prozesstemperaturen und erm{\"o}glicht sowohl die Realisierung anspruchsvoller Mischverbindungen als auch das F{\"u}gen verzinkter St{\"a}hle mit minimaler Zinkschichtverletzung. Aktuelle Entwicklungen von Lotwerkstoffen zielen sowohl in Richtung Absenkung der Schmelztemperaturen als auch in Richtung Festigkeitssteigerung, um die Anwendungsm{\"o}glichkeiten noch weiter zu vervielf{\"a}ltigen. Dabei unterliegen sowohl Eisenbasislegierungen als auch Systeme auf Kupfer- oder Zinkbasis einer stetigen Weiterentwicklung. Die bereits heute erreichbaren Festigkeiten reichen bis etwa 900 MPa (CuAl8Mn13Ni2Fe2) bei Kupferbasislegierungen und 410 MPa (AnAl7,5Cu2,5 + 180 ppm Mg) bei Zinklegierungen. Neben der Energieeinsparung durch die reduzierten Prozesstemperaturen beim F{\"u}gen und der M{\"o}glichkeit Hybridstrukturen herzustellen, ergeben sich außerdem Vorteile bei der Reparatur und dem Recycling von Bauteilen. Da der Zusatzwerkstoff unabh{\"a}ngig vom Grundwerkstoff wiederaufgeschmolzen werden kann, sind eine leichtere Reparatur und auch ein Trennen der Bauteile zum Recycling m{\"o}glich. Dies f{\"u}hrt bei Betrachtung des gesamten Produktlebenszyklus zu einer h{\"o}heren Energieeffizienz und einer Schonung der nat{\"u}rlichen Rohstoffe und Ressourcen. Durch die steigenden Energie- und Werkstoffkosten und den damit verbundenen Kostendruck r{\"u}ckt dieser Aspekt neben der Machbarkeit und Produktivit{\"a}t langsam, aber sicher ins Blickfeld der Unternehmen. Kostenvorteile ergeben sich außerdem durch Betrachtung und Modifikation ganzer Fertigungsketten. Niedrigschmelzende Zusatzwerkstoffe erm{\"o}glichen beispielsweise das F{\"u}gen verzinkter Halbzeuge ohne Zinkschichtverletzung. Da Halbzeuge in großen Mengen kosteng{\"u}nstiger verzinkt werden k{\"o}nnen als fertige Konstruktionen, ist das F{\"u}gen verzinkter Halbzeuge insgesamt g{\"u}nstiger als das Verzinken geschweißter Stahlkonstruktionen.}, language = {de} } @inproceedings{Goecke2005, author = {Goecke, Sven-Frithjof}, title = {Energiereduziertes Lichtbogen-F{\"u}geverfahren f{\"u}r w{\"a}rmeempfindliche Werkstoffe}, series = {In: Schweißen und Schneiden 2005 : Vortr{\"a}ge der gleichnamigen Großen Schweißtechnischen Tagung in Essen vom 12. bis 14. September 2005 / Veranst.: DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V., D{\"u}sseldorf . - D{\"u}sseldorf : Verl. f{\"u}r Schweißen und Verwandte Verfahren, DVS-Verl., 2005. - (Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren: DVS-Berichte ; Bd. 237). - ISBN 3-87155-695-5}, booktitle = {In: Schweißen und Schneiden 2005 : Vortr{\"a}ge der gleichnamigen Großen Schweißtechnischen Tagung in Essen vom 12. bis 14. September 2005 / Veranst.: DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V., D{\"u}sseldorf . - D{\"u}sseldorf : Verl. f{\"u}r Schweißen und Verwandte Verfahren, DVS-Verl., 2005. - (Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren: DVS-Berichte ; Bd. 237). - ISBN 3-87155-695-5}, pages = {44 -- 48}, year = {2005}, language = {de} } @inproceedings{GoeckeBergmannWitte2012, author = {Goecke, Sven-Frithjof and Bergmann, J. P. and Witte, K.-H.}, title = {Steigerung der Ressourceneffizienz des MSG-Schweißens}, series = {In: DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vortr{\"a}ge der Veranstaltungen in Saarbr{\"u}cken am 17. und 18. September 2012 / Veranst.: DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren. - D{\"u}sseldorf : DVS Media, 2012. - (DVS-Berichte / DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V., ISSN 0418-9639 ; 286). - ISBN 3-87155-593-2, 978-3-87155-593-0}, booktitle = {In: DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vortr{\"a}ge der Veranstaltungen in Saarbr{\"u}cken am 17. und 18. September 2012 / Veranst.: DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren. - D{\"u}sseldorf : DVS Media, 2012. - (DVS-Berichte / DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V., ISSN 0418-9639 ; 286). - ISBN 3-87155-593-2, 978-3-87155-593-0}, pages = {263 -- 264}, year = {2012}, language = {de} } @inproceedings{GoeckeHuebnerPenningetal.2012, author = {Goecke, Sven-Frithjof and H{\"u}bner, M. and Penning, O. and H{\"o}cker, F. and Suchodoll, D.}, title = {Steigerung der Ressourceneffizienz des MSG-Schweissens}, series = {In: DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vortr{\"a}ge der Veranstaltungen in Saarbr{\"u}cken am 17. und 18. September 2012 / Veranst.: DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren. - D{\"u}sseldorf : DVS Media, 2012. - (DVS-Berichte / DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V., ISSN 0418-9639 ; 286). - ISBN 3-87155-593-2, 978-3-87155-593-0}, booktitle = {In: DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vortr{\"a}ge der Veranstaltungen in Saarbr{\"u}cken am 17. und 18. September 2012 / Veranst.: DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren. - D{\"u}sseldorf : DVS Media, 2012. - (DVS-Berichte / DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V., ISSN 0418-9639 ; 286). - ISBN 3-87155-593-2, 978-3-87155-593-0}, pages = {265 -- 268}, year = {2012}, language = {de} } @inproceedings{WildenJahnSabelfeldetal.2010, author = {Wilden, J. and Jahn, S. and Sabelfeld, N. and Rehfeldt, L. and Luhn, T. and Goecke, Sven-Frithjof and Schmid, E. and Berger, U.}, title = {L{\"o}ten als Schl{\"u}ssel zum ressourcen - und energieeffizienten F{\"u}gen im Produktlebenszyklus}, series = {In: Hart- und Hochtemperaturl{\"o}ten und Diffusionsschweißen : L{\"O}T 2010; Vortr{\"a}ge und Posterbeitr{\"a}ge des 9. internationalen Kolloquiums in Aachen vom 15. bis 17. Juni 2010 = Brazing, high temperature brazing and diffusion bonding / Gemeinschaftsveranstaltung von DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V., D{\"u}sseldorf ... - D{\"u}sseldorf : DVS Media, 2010. - (DVS-Berichte ; 263) - ISBN 978-3-87155-589-3 ; 3-87155-589-4}, booktitle = {In: Hart- und Hochtemperaturl{\"o}ten und Diffusionsschweißen : L{\"O}T 2010; Vortr{\"a}ge und Posterbeitr{\"a}ge des 9. internationalen Kolloquiums in Aachen vom 15. bis 17. Juni 2010 = Brazing, high temperature brazing and diffusion bonding / Gemeinschaftsveranstaltung von DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V., D{\"u}sseldorf ... - D{\"u}sseldorf : DVS Media, 2010. - (DVS-Berichte ; 263) - ISBN 978-3-87155-589-3 ; 3-87155-589-4}, pages = {159 -- 163}, year = {2010}, language = {de} } @inproceedings{GoeckeSchmaranzer2009, author = {Goecke, Sven-Frithjof and Schmaranzer, C.}, title = {ColdArc-Schweissen von hoch festen martensitischen Warmb{\"a}ndern f{\"u}r den europ{\"a}ischen Nutzfahrzeugmarkt}, series = {In: Die Verbindungs Spezialisten 2009 : Große Schweißtechnische Tagung ; Forschungsforum, Industrieforum, Studentenkongress, Handwerkerforum ; Vortr{\"a}ge der Veranstaltung in Essen vom 14. bis 19. September 2009 / Veranst.: DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V. - D{\"u}sseldorf : DVS Media, 2009. - (DVS-Berichte / DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V., ISSN 0418-9639 ; 258). - ISBN 978-3-87155-584-8}, booktitle = {In: Die Verbindungs Spezialisten 2009 : Große Schweißtechnische Tagung ; Forschungsforum, Industrieforum, Studentenkongress, Handwerkerforum ; Vortr{\"a}ge der Veranstaltung in Essen vom 14. bis 19. September 2009 / Veranst.: DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V. - D{\"u}sseldorf : DVS Media, 2009. - (DVS-Berichte / DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V., ISSN 0418-9639 ; 258). - ISBN 978-3-87155-584-8}, pages = {129 -- 132}, year = {2009}, language = {de} } @inproceedings{WildenJahnReichetal.2008, author = {Wilden, Johannes and Jahn, Simon and Reich, Sebastian and Dal-Canton, Sebastian and Goecke, Sven-Frithjof}, title = {Controlled short arc technology - A new method for processing heat sensitive materials}, series = {In: Future trends in steel development, processing technologies and applications : bringing the automotive, supplier and steel industries together / SCT 2008. Ed. by Bernhard Fuchsbauer und Hans-Joachim Wieland. [Organizer: Steel Institute VDEh, D{\"u}sseldorf, Germany]. - D{\"u}sseldorf : Verl. Stahleisen, 2008. - ISBN 978-3-514-00755-0}, booktitle = {In: Future trends in steel development, processing technologies and applications : bringing the automotive, supplier and steel industries together / SCT 2008. Ed. by Bernhard Fuchsbauer und Hans-Joachim Wieland. [Organizer: Steel Institute VDEh, D{\"u}sseldorf, Germany]. - D{\"u}sseldorf : Verl. Stahleisen, 2008. - ISBN 978-3-514-00755-0}, pages = {368 -- 375}, year = {2008}, language = {en} } @inproceedings{WildenBergmannReichetal.2007, author = {Wilden, J. and Bergmann, J. P. and Reich, S. and Neuw{\"o}hner, P. and Goecke, Sven-Frithjof}, title = {Basic investigations about the flux-free soldering of multi-material-mix lightweight constructions}, series = {In: Hart- und Hochtemperaturl{\"o}ten und Diffusionsschweißen : Vortr{\"a}ge und Posterbeitr{\"a}ge des 8. Internationalen Kolloquiums in Aachen vom 19. bis 21. Juni 2007. - Als Ms. gedr. - D{\"u}sseldorf : DVS-Verl., 2007. - (DVS-Berichte ; 243). - ISBN 978-3-87155-799-6}, booktitle = {In: Hart- und Hochtemperaturl{\"o}ten und Diffusionsschweißen : Vortr{\"a}ge und Posterbeitr{\"a}ge des 8. Internationalen Kolloquiums in Aachen vom 19. bis 21. Juni 2007. - Als Ms. gedr. - D{\"u}sseldorf : DVS-Verl., 2007. - (DVS-Berichte ; 243). - ISBN 978-3-87155-799-6}, pages = {176 -- 182}, year = {2007}, language = {en} } @inproceedings{WildenJahnReichetal.2007, author = {Wilden, J. and Jahn, S. and Reich, S. and Goecke, Sven-Frithjof}, title = {Technologien zum flussmittelfreien F{\"u}gen von Leichtmetall-Material-Mix- Konstruktionen}, series = {In: Schweißtechnik und F{\"u}getechnik - Schl{\"u}sseltechnologien der Zukunft = Welding and joining - key technologies for the future / 10. Internationales Aachener Schweißtechnik-Kolloquium, 24. - 25.10.2007. Hrsg.: Uwe Reisgen. Red. Bearb.: Konrad Willms ; Nikolaus Wagner. [Veranst. ISF Aachen ...]. - Aachen : Shaker, 2007. - (Aachener Berichte F{\"u}getechnik ; 2007,1). - 3-8322-6644-5, 978-3-8322-6644-8}, booktitle = {In: Schweißtechnik und F{\"u}getechnik - Schl{\"u}sseltechnologien der Zukunft = Welding and joining - key technologies for the future / 10. Internationales Aachener Schweißtechnik-Kolloquium, 24. - 25.10.2007. Hrsg.: Uwe Reisgen. Red. Bearb.: Konrad Willms ; Nikolaus Wagner. [Veranst. ISF Aachen ...]. - Aachen : Shaker, 2007. - (Aachener Berichte F{\"u}getechnik ; 2007,1). - 3-8322-6644-5, 978-3-8322-6644-8}, pages = {491 -- 500}, year = {2007}, language = {de} } @inproceedings{GoeckeKruscha2007, author = {Goecke, Sven-Frithjof and Kruscha, J.}, title = {Theorie und Praxis des Elektrodenaufschmelzverhaltens und des Werkstoff{\"u}bergangs im Kurzlichtbogenbereich}, series = {In: Die Verbindungs-Spezialisten : Kurzfassungen und Vortr{\"a}ge der gleichnamigen Tagungen in Basel vom 16. bis 18. September 2007 / Veranst.: DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V., D{\"u}sseldorf. In Kooperation mit: Institut de Soudure, Villepinte (Frankreich) ... - D{\"u}sseldorf : Verl. f{\"u}r Schweißen und Verwandte Verfahren, DVS-Verl., 2007. - (Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren: DVS-Berichte ; Bd. 244). - ISBN 978-3-87155-250-2}, booktitle = {In: Die Verbindungs-Spezialisten : Kurzfassungen und Vortr{\"a}ge der gleichnamigen Tagungen in Basel vom 16. bis 18. September 2007 / Veranst.: DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V., D{\"u}sseldorf. In Kooperation mit: Institut de Soudure, Villepinte (Frankreich) ... - D{\"u}sseldorf : Verl. f{\"u}r Schweißen und Verwandte Verfahren, DVS-Verl., 2007. - (Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren: DVS-Berichte ; Bd. 244). - ISBN 978-3-87155-250-2}, pages = {245 -- 258}, year = {2007}, language = {de} } @inproceedings{WildenBergmannReichetal.2006, author = {Wilden, J. and Bergmann, J. P. and Reich, S. and Veron, F. and M{\"o}ller, L. and Goecke, Sven-Frithjof}, title = {Methoden und Strategien zum flussmittelfreien F{\"u}gen von Mischverbindungen durch Kombination der geregelten Lichtbogentechnik und der Lasertechnik}, series = {In: Schweißen und Schneiden 2006 : Vortr{\"a}ge der gleichnamigen Großen Schweißtechnischen Tagung in Aachen vom 20. bis 22. September 2006 / Veranst.: DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V., D{\"u}sseldorf. - D{\"u}sseldorf : Verl. f{\"u}r Schweißen und Verwandte Verfahren, DVS-Verl., 2006. - (Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren: DVS-Berichte ; Bd. 240). - ISBN 3-87155-699-8 ; 978-3-87155-699-9}, booktitle = {In: Schweißen und Schneiden 2006 : Vortr{\"a}ge der gleichnamigen Großen Schweißtechnischen Tagung in Aachen vom 20. bis 22. September 2006 / Veranst.: DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V., D{\"u}sseldorf. - D{\"u}sseldorf : Verl. f{\"u}r Schweißen und Verwandte Verfahren, DVS-Verl., 2006. - (Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren: DVS-Berichte ; Bd. 240). - ISBN 3-87155-699-8 ; 978-3-87155-699-9}, pages = {120 -- 125}, year = {2006}, language = {de} } @inproceedings{DornGoecke2001, author = {Dorn, L. and Goecke, Sven-Frithjof}, title = {Vorteile des w{\"a}rmearmen ChopArc-Schweißens und -L{\"o}tens bei beschichteten und artverschiedenen Blechen f{\"u}r Leichtfahrzeuge}, series = {In: F{\"u}getechnik im Automobilbau : Vortr{\"a}ge ; 9. - 11. Mai 2001 in Berlin / Deutscher Verband f{\"u}r Materialforschung u. -pr{\"u}fung e.V. - Berlin : DVM, 2001. - (Deutscher Verband f{\"u}r Materialforschung und -pr{\"u}fung: Vortr{\"a}ge ; 2001) (Deutscher Verband f{\"u}r Materialforschung und -pr{\"u}fung: DVM-Bericht ; 668)}, booktitle = {In: F{\"u}getechnik im Automobilbau : Vortr{\"a}ge ; 9. - 11. Mai 2001 in Berlin / Deutscher Verband f{\"u}r Materialforschung u. -pr{\"u}fung e.V. - Berlin : DVM, 2001. - (Deutscher Verband f{\"u}r Materialforschung und -pr{\"u}fung: Vortr{\"a}ge ; 2001) (Deutscher Verband f{\"u}r Materialforschung und -pr{\"u}fung: DVM-Bericht ; 668)}, pages = {93 -- 108}, year = {2001}, language = {de} } @inproceedings{DornGoecke2001, author = {Dorn, Lutz and Goecke, Sven-Frithjof}, title = {Choparc for superior MAG-welding of thin sheets with a thickness of less than 0,2 mm}, series = {In: Proceedings of the International Conference on the Joining of Materials JOM-10 : May 11 - 14, 2001, Helsing{\o}r - Denmark / ed. by the Institute for the Joining of Materials . - Gilleleje, 2001. - ISBN 87-89582-097-1}, booktitle = {In: Proceedings of the International Conference on the Joining of Materials JOM-10 : May 11 - 14, 2001, Helsing{\o}r - Denmark / ed. by the Institute for the Joining of Materials . - Gilleleje, 2001. - ISBN 87-89582-097-1}, pages = {84 -- 89}, year = {2001}, language = {en} } @inproceedings{DornGoecke1997, author = {Dorn, D. and Goecke, Sven-Frithjof}, title = {Influence of very low percentage active gas components in argon on pulsed current welding}, series = {In: 30th International Symposium on Automotive Technology and Automation, Florence, Italy, 16th - 19th June 1997 ; the largest European automotive forum with international participation ; [proceedings] / [ed. by: Dieter Roller] Teil: Materials for energy-efficient vehicles. Paint and powder coating applications in the automotive industries. - Croydon : Automotive Automation Ltd., 1997. - ISBN 0-947719-94-6}, booktitle = {In: 30th International Symposium on Automotive Technology and Automation, Florence, Italy, 16th - 19th June 1997 ; the largest European automotive forum with international participation ; [proceedings] / [ed. by: Dieter Roller] Teil: Materials for energy-efficient vehicles. Paint and powder coating applications in the automotive industries. - Croydon : Automotive Automation Ltd., 1997. - ISBN 0-947719-94-6}, pages = {221 -- 228}, year = {1997}, language = {en} } @inproceedings{WildenJahnReichetal.2007, author = {Wilden, J. and Jahn, S. and Reich, S. and Goecke, Sven-Frithjof}, title = {Technologien zum flussmittelfreien F{\"u}gen von Leichtmetall-Material-Mix-Konstruktionen}, series = {In: Schweißtechnik und F{\"u}getechnik - Schl{\"u}sseltechnologien der Zukunft = Welding and joining - key technologies for the future / 10. Internationales Aachener Schweißtechnik-Kolloquium, 24. - 25.10.2007. Hrsg.: Uwe Reisgen. Red. Bearb.: Konrad Willms ; Nikolaus Wagner. [Veranst. ISF Aachen ...]. - Aachen : Shaker, 2007. - ISBN 978-3-8322-6644-8 ; 3-8322-6644-5}, booktitle = {In: Schweißtechnik und F{\"u}getechnik - Schl{\"u}sseltechnologien der Zukunft = Welding and joining - key technologies for the future / 10. Internationales Aachener Schweißtechnik-Kolloquium, 24. - 25.10.2007. Hrsg.: Uwe Reisgen. Red. Bearb.: Konrad Willms ; Nikolaus Wagner. [Veranst. ISF Aachen ...]. - Aachen : Shaker, 2007. - ISBN 978-3-8322-6644-8 ; 3-8322-6644-5}, pages = {491 -- 502}, year = {2007}, language = {de} } @inproceedings{GoeckeBergmannWitte2012, author = {Goecke, Sven-Frithjof and Bergmann, J. P. and Witte, K.-H.}, title = {Die Effizienzfabrik - Schwerpunkte und Analysem{\"o}glichkeiten aus Sicht der Schweißtechnik zur ressourceneffizienten Fertigung}, series = {In: DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vortr{\"a}ge der Veranstaltungen in Saarbr{\"u}cken am 17. und 18. September 2012 / Veranst.: DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren}, booktitle = {In: DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vortr{\"a}ge der Veranstaltungen in Saarbr{\"u}cken am 17. und 18. September 2012 / Veranst.: DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren}, publisher = {DVS-Media}, address = {D{\"u}sseldorf}, isbn = {978-3-87155-593-0}, pages = {263 -- 264}, year = {2012}, language = {de} } @techreport{GoeckeKrautwald2014, author = {Goecke, Sven-Frithjof and Krautwald, Anno}, title = {[ENERWELD] : effiziente thermische F{\"u}geverfahren}, address = {Brandenburg}, isbn = {978-3-940326-00-3}, pages = {174}, year = {2014}, subject = {F{\"u}gen}, language = {de} } @inproceedings{EbertSpiegelGoeckeRethmeier2013, author = {Ebert-Spiegel, M. and Goecke, Sven-Frithjof and Rethmeier, M.}, title = {Adaptive Regelung erm{\"o}glicht F{\"u}gespaltkompensation beim MAG-Schweißen}, series = {DVS Congress 2013 : Große Schweißtechnische Tagung, DVS-Studentenkongress, 4. DVS-Forum Schulung und Pr{\"u}fung ; Vortr{\"a}ge der Veranstaltungen in Essen vom 16. bis 21. September 2013}, booktitle = {DVS Congress 2013 : Große Schweißtechnische Tagung, DVS-Studentenkongress, 4. DVS-Forum Schulung und Pr{\"u}fung ; Vortr{\"a}ge der Veranstaltungen in Essen vom 16. bis 21. September 2013}, publisher = {DVS Media}, address = {D{\"u}sseldorf}, isbn = {978-3-87155-614-2}, pages = {121 -- 126}, year = {2013}, language = {de} } @article{EbertSpiegelGoeckeRethmeier2014, author = {Ebert-Spiegel, M. and Goecke, Sven-Frithjof and Rethmeier, M.}, title = {Efficient gap filling in MAG welding using optical sensors}, series = {Welding in the World}, volume = {58}, journal = {Welding in the World}, number = {5}, issn = {0043-2288 (print)}, doi = {10.1007/s40194-014-0145-8}, pages = {637 -- 647}, year = {2014}, language = {en} } @inproceedings{Goecke2014, author = {Goecke, Sven-Frithjof}, title = {Visualisation and Control of the Heat Input in MAG Welding of Ultra-High-Strength Manganese-Boron Steels}, series = {Visual-JW 2014, November 26-28th, Proceedings of the International Symposium on Visualization in Joining \& Welding Science through Advanced Measurements and Simulation, 28-30 November, Joining and Welding Research Institute - JWRI, Osaka University 2014, Osaka, Japan, (2014); JWP-15}, booktitle = {Visual-JW 2014, November 26-28th, Proceedings of the International Symposium on Visualization in Joining \& Welding Science through Advanced Measurements and Simulation, 28-30 November, Joining and Welding Research Institute - JWRI, Osaka University 2014, Osaka, Japan, (2014); JWP-15}, pages = {35 -- 36}, year = {2014}, language = {en} } @inproceedings{MoellerKueglerKoetschauetal.2014, author = {M{\"o}ller, F. and K{\"u}gler, H. and K{\"o}tschau, S. and Geier, A. and Goecke, Sven-Frithjof}, title = {Gap Bridging Ability in Laser GMA Hybrid Welding of Thin 22MnB5 Sheets}, series = {Physics Procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014}, volume = {56}, booktitle = {Physics Procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014}, issn = {1875-3892 ; 1875-3884}, doi = {doi:10.1016/j.phpro.2014.08.052}, pages = {620 -- 629}, year = {2014}, language = {en} } @inproceedings{MuellerGoecke2013, author = {M{\"u}ller, A. and Goecke, Sven-Frithjof}, title = {Investigation on laser beam oscillation for fi llet welds in lap joints}, series = {JOM-17 : Seventeenth International Conference on Joining of Materials ; Helsing{\o}r, Denmark, Konventum Lo Skolen, 5 - 8 May 2013}, booktitle = {JOM-17 : Seventeenth International Conference on Joining of Materials ; Helsing{\o}r, Denmark, Konventum Lo Skolen, 5 - 8 May 2013}, year = {2013}, language = {en} } @article{MuellerGoeckeAlbertetal.2013, author = {M{\"u}ller, A. and Goecke, Sven-Frithjof and Albert, F. and Sievi, P. and Baum, S.}, title = {Nahtgef{\"u}hrtes Laserstrahl-Remoteschweißen mit {\"o}rtlicher Strahloszillation}, series = {Schweißen und Schneiden}, volume = {65}, journal = {Schweißen und Schneiden}, number = {9}, issn = {0036-7184}, pages = {631 -- 635}, year = {2013}, language = {de} } @article{MuellerGoeckeRethmeier2014, author = {M{\"u}ller, A. and Goecke, Sven-Frithjof and Rethmeier, M.}, title = {Laser beam oscillation for fillet welding}, series = {Welding in the World}, volume = {58}, journal = {Welding in the World}, number = {6}, issn = {1878-6669 (online)}, doi = {10.1007/s40194-014-0165-4}, pages = {865 -- 872}, year = {2014}, language = {en} } @inproceedings{MoellerMittelstaedtKoetschauetal.2013, author = {M{\"o}ller, F. and Mittelst{\"a}dt, C. and K{\"o}tschau, S. and Thomy, C. and Goecke, Sven-Frithjof and Vollertsen, F.}, title = {Effect of process parameters on joint properties in laser GMA hybrid welding of thin-sheet fillet welds on 22MnB5}, series = {IIW 2013 Annual Assembly Com. XVII, Essen (2013) IIW-Doc. XII-2129- 13; IV- 1138-13 (online)}, booktitle = {IIW 2013 Annual Assembly Com. XVII, Essen (2013) IIW-Doc. XII-2129- 13; IV- 1138-13 (online)}, year = {2013}, language = {en} } @inproceedings{EbertSpiegelGoecke2014, author = {Ebert-Spiegel, Michael and Goecke, Sven-Frithjof}, title = {Adaptive Regelung erm{\"o}glicht F{\"u}gespaltkompensation beim MAG-Schweißen}, series = {15. Nachwuchswissenschaftlerkonferenz : Tagungsband}, booktitle = {15. Nachwuchswissenschaftlerkonferenz : Tagungsband}, organization = {Nachwuchswissenschaftlerkonferenz ; 15 <2014, Magdeburg>}, isbn = {978-3-935831-58-1}, pages = {185 -- 191}, year = {2014}, language = {de} } @misc{EbertSpiegelGoeckeRethmeier2014, author = {Ebert-Spiegel, M. and Goecke, Sven-Frithjof and Rethmeier, M.}, title = {Possibilities for compensating a higher heat input, in particular by the torch off set relative to the top sheet at the fillet weld on a lap joint}, year = {2014}, language = {en} } @misc{EbertSpiegelGoeckeRethmeier2013, author = {Ebert-Spiegel, M. and Goecke, Sven-Frithjof and Rethmeier, M.}, title = {Efficient gap filling in MAG welding using optical sensors}, year = {2013}, language = {en} } @misc{MuellerGoeckeRethmeier2013, author = {M{\"u}ller, A. and Goecke, Sven-Frithjof and Rethmeier, M.}, title = {Laser beam oscillation for fillet welding}, year = {2013}, language = {en} } @misc{MuellerGoeckeRethmeier2014, author = {M{\"u}ller, A. and Goecke, Sven-Frithjof and Rethmeier, M.}, title = {Laser beam oscillation welding for automotive applications}, year = {2014}, language = {en} } @article{KueglerMoellerKoetschauetal.2014, author = {K{\"u}gler, H. and M{\"o}ller, F. and K{\"o}tschau, S. and Geier, A. and Goecke, Sven-Frithjof}, title = {Bridgeability of increasing gap in laser GMA hybrid welding of 22MnB5}, series = {IIW Annual Assembly 2014 Com. XII. Seoul/Korea (2014) IIW - Doc. XII - 2169 - 14 (online)}, journal = {IIW Annual Assembly 2014 Com. XII. Seoul/Korea (2014) IIW - Doc. XII - 2169 - 14 (online)}, year = {2014}, language = {en} } @article{GaoWuGoeckeetal.2017, author = {Gao, X. S. and Wu, C. S. and Goecke, Sven-Frithjof and K{\"u}gler, H.}, title = {Numerical simulation of temperature field, fluid flow and weld bead formation in oscillating single mode laser-GMA hybrid welding}, series = {Journal of Materials Processing Technology}, volume = {242}, journal = {Journal of Materials Processing Technology}, issn = {0924-0136}, doi = {10.1016/j.jmatprotec.2016.11.028}, pages = {147 -- 159}, year = {2017}, language = {en} } @misc{SocherBeckSchraderetal.2017, author = {Socher, Rolf and Beck, Eberhard and Schrader, Thomas and L{\"o}we, Katharina and Kindsm{\"u}ller, Martin Christof and Syrjakow, Michael and Vielhauer, Claus and Liefold, Marius and Hasche, Eberhard and G{\"o}tze, Thomas and Goecke, Sven-Frithjof and Hirsch, S{\"o}ren and Hoier, Bernhard and Kraska, Martin and Malessa, Reiner and M{\"o}llmann, Klaus-Peter and Pinno, Frank and Mieke, Christian and Vollmer, Michael and Burger-Menzel, Bettina and Frosch, Katharina and Johannsen, Andreas and Meiser, Vera G. and Scheeg, Jochen and Schwill, J{\"u}rgen and H{\"o}ding, Michael and L{\"u}thy, Anja and Stokar von Neuforn, Daniela and Wilms, Andreas and Edel, Karl-Otto and Pusch, Gerhard and Parsch, Stefan and H{\"o}ft, Uwe and Loose, Harald and Tetzlaff, Laura and Orlowski, Katja and Kell, Gerald}, title = {Forschungsbericht der Technischen Hochschule Brandenburg 2015-2016}, edition = {Berichtszeitraum: WS 2014/15; SS 2016}, publisher = {Technische Hochschule Brandenburg}, address = {Brandenburg an der Havel}, organization = {Technische Hochschule Brandenburg}, issn = {1861-3462}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:522-opus4-19510}, pages = {154}, year = {2017}, abstract = {Mit den Forschungsberichten bietet die Technische Hochschule Brandenburg einen regelm{\"a}ßigen {\"U}berblick zu den Forschungsthemen und -projekten der Hochschule.}, language = {de} } @inproceedings{GoeckeKueglerBaumetal.2016, author = {Goecke, Sven-Frithjof and K{\"u}gler, H. and Baum, S. and Vollertsen, F.}, title = {Gap Bridging in Laser-GMA-Hybrid Welding of Boron Manganese UHSS}, series = {Proceedings of the The International Symposium on Visualization in Joining \& Welding Science through Advanced Measurements and Simulation, Visual-JW2016, October 17-18, 2016, Hotel Hankyu Expo Park, Osaka, Japan}, booktitle = {Proceedings of the The International Symposium on Visualization in Joining \& Welding Science through Advanced Measurements and Simulation, Visual-JW2016, October 17-18, 2016, Hotel Hankyu Expo Park, Osaka, Japan}, year = {2016}, language = {en} } @techreport{KueglerMoellerVollertsenetal.2015, author = {K{\"u}gler, Helge and M{\"o}ller, Felix and Vollertsen, Frank and Goecke, Sven-Frithjof and Baum, Sebastian}, title = {Laser-MSG Hybridschweißen von Stahlfeinblechen}, publisher = {Verlag und Vertriebsgesellschaft mbH}, address = {D{\"u}sseldorf}, isbn = {978-3-942541-85-5}, pages = {V, 80}, year = {2015}, subject = {Stahlblech}, language = {de} } @article{KueglerMoellerGoeckeetal.2016, author = {K{\"u}gler, Helge and M{\"o}ller, Felix and Goecke, Sven-Frithjof and Vollertsen, Frank}, title = {Dauerfestigkeit hybridgeschweißter {\"U}berlappn{\"a}hte des Stahls 22MnB5}, series = {Materials Testing}, volume = {58}, journal = {Materials Testing}, number = {6}, issn = {2195-8572 (Online)}, doi = {https://doi.org/10.3139/120.110880}, pages = {569 -- 574}, year = {2016}, language = {de} } @techreport{KueglerMoellerGoeckeetal.2015, author = {K{\"u}gler, H. and M{\"o}ller, F. and Goecke, Sven-Frithjof and Vollertsen, F.}, title = {Thermisches F{\"u}gen h{\"o}chstfester St{\"a}hle}, series = {Schweissen und Schneiden}, volume = {67}, journal = {Schweissen und Schneiden}, number = {12}, issn = {0036-7184}, pages = {744}, year = {2015}, language = {de} } @inproceedings{KueglerMoellerKoetschauetal.2015, author = {K{\"u}gler, H. and M{\"o}ller, F. and K{\"o}tschau, S. and Goecke, Sven-Frithjof and Vollertsen, F.}, title = {Laser-MSG-Hybridschweißen von pressgeh{\"a}rteten Feinblechen mit reduziertem W{\"a}rmeeintrag}, series = {Große Schweißtechnische Tagung ; DVS-Studentenkongress u.a. Vortr{\"a}ge der Veranstaltungen im Rahmen von DVS Congress und DVS Expo in N{\"u}rnberg vom 15. bis 17. September 2015. Veranst.: DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V., D{\"u}sseldorf}, booktitle = {Große Schweißtechnische Tagung ; DVS-Studentenkongress u.a. Vortr{\"a}ge der Veranstaltungen im Rahmen von DVS Congress und DVS Expo in N{\"u}rnberg vom 15. bis 17. September 2015. Veranst.: DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V., D{\"u}sseldorf}, publisher = {DVS Media}, address = {D{\"u}sseldorf}, isbn = {978-3-945023-46-4}, pages = {55 -- 59}, year = {2015}, language = {de} } @inproceedings{GoeckeEbertSpiegel2015, author = {Goecke, Sven-Frithjof and Ebert-Spiegel, Michael}, title = {Towards a More Robust Automated MAG Welding}, series = {2015 IEEE International Conference on Automation Science and Engineering (CASE) : 24 - 28 Aug. 2015, Gothenburg, Sweden}, booktitle = {2015 IEEE International Conference on Automation Science and Engineering (CASE) : 24 - 28 Aug. 2015, Gothenburg, Sweden}, publisher = {IEEE}, address = {Piscataway, NJ}, doi = {10.1109/coase.2015.7294114}, pages = {417 -- 418}, year = {2015}, language = {en} } @article{DasShomeGoeckeetal.2015, author = {Das, Ashish and Shome, Mahadev and Goecke, Sven-Frithjof and De, Amitava and Das, C. R.}, title = {Joining of galvannealed steel and aluminium alloy using controlled short circuiting gas metal arc welding process}, series = {Science and Technology of Welding \& Joining}, volume = {20}, journal = {Science and Technology of Welding \& Joining}, number = {5}, doi = {10.1179/1362171815y.0000000032}, pages = {402 -- 408}, year = {2015}, language = {en} } @article{EbertSpiegelGoeckeRethmeier2015, author = {Ebert-Spiegel, Michael and Goecke, Sven-Frithjof and Rethmeier, Michael}, title = {Possibilities for compensating a higher heat input, in particular by the torch offset relative to the top sheet at the fillet weld on a lap joint}, series = {Welding in the World}, volume = {59}, journal = {Welding in the World}, number = {3}, doi = {10.1007/s40194-015-0220-9}, pages = {443 -- 453}, year = {2015}, language = {en} } @article{GoeckeSyedEbertSpiegeletal.2013, author = {Goecke, Sven-Frithjof and Syed, Arshad Alam and Ebert-Spiegel, Michael and De, Amitava}, title = {Probing current, voltage and metal transfer characteristics in pulsed arc and in conventional and a novel low energy input short arc GMAW}, series = {Quarterly Journal of the Japan Welding Society}, volume = {31}, journal = {Quarterly Journal of the Japan Welding Society}, number = {4}, doi = {10.2207/qjjws.31.26s}, pages = {26s -- 30s}, year = {2013}, language = {en} } @article{MakwanaShomeGoeckeetal.2018, author = {Makwana, Pinaac and Shome, Mahadev and Goecke, Sven-Frithjof and De, Amitava}, title = {Fast responsive control of current and voltage waveforms for gas metal arc brazing of thin zinc-coated steel sheets}, series = {Journal of Materials Processing Technology}, volume = {254}, journal = {Journal of Materials Processing Technology}, doi = {10.1016/j.jmatprotec.2017.11.028}, pages = {171 -- 178}, year = {2018}, language = {en} } @article{MakwanaShomeGoeckeetal.2017, author = {Makwana, Pinaac and Shome, Mahadev and Goecke, Sven-Frithjof and De, Amitava}, title = {Wetting length in gas metal arc brazing of galvanised steel}, series = {Science and Technology of Welding \& Joining}, volume = {22}, journal = {Science and Technology of Welding \& Joining}, number = {2}, doi = {10.1080/13621718.2016.1207289}, pages = {1 -- 4}, year = {2017}, language = {en} } @article{MakwanaShomeGoeckeetal.2016, author = {Makwana, Pinaac and Shome, Mahadev and Goecke, Sven-Frithjof and De, Amitava}, title = {Gas metal arc brazing of galvannealed steel sheets}, series = {Science and Technology of Welding \& Joining}, volume = {21}, journal = {Science and Technology of Welding \& Joining}, number = {7}, doi = {10.1080/13621718.2016.1145420}, pages = {1 -- 7}, year = {2016}, language = {en} } @article{MuellerGoeckeRethmeier2018, author = {M{\"u}ller, Alexander and Goecke, Sven-Frithjof and Rethmeier, Michael}, title = {Laser beam oscillation welding for automotive applications}, series = {Welding in the World}, volume = {62}, journal = {Welding in the World}, number = {5}, doi = {10.1007/s40194-018-0625-3}, pages = {1039 -- 1047}, year = {2018}, language = {en} } @article{GaoWuGoecke2018, author = {Gao, X. S. and Wu, Chuang-Song and Goecke, Sven-Frithjof}, title = {Numerical analysis of heat transfer and fluid flow characteristics and their influence on bead defects formation in oscillating laser-GMA hybrid welding of lap joints}, series = {The International Journal of Advanced Manufacturing Technology}, volume = {98}, journal = {The International Journal of Advanced Manufacturing Technology}, number = {1-4}, doi = {10.1007/s00170-018-2293-2}, pages = {523 -- 537}, year = {2018}, language = {en} } @article{ChenZhangJiangetal.2018, author = {Chen, Shujun and Zhang, Ruiying and Jiang, Fan and Goecke, Sven-Frithjof}, title = {A novel method for testing the electrical property of arc column in plasma arc welding}, series = {Welding in the World}, volume = {62}, journal = {Welding in the World}, number = {3}, doi = {10.1007/s40194-018-0561-2}, pages = {637 -- 645}, year = {2018}, language = {en} } @article{GaoWuGoeckeetal.2017, author = {Gao, X. S. and Wu, Chuan-Song and Goecke, Sven-Frithjof and Kuegler, H.}, title = {Effects of process parameters on weld bead defects in oscillating laser-GMA hybrid welding of lap joints}, series = {The International Journal of Advanced Manufacturing Technology}, volume = {93}, journal = {The International Journal of Advanced Manufacturing Technology}, number = {5-8}, doi = {10.1007/s00170-017-0637-y}, pages = {1877 -- 1892}, year = {2017}, language = {en} } @article{DasShomeGoeckeetal.2017, author = {Das, Ashish and Shome, Mahadev and Goecke, Sven-Frithjof and De, Amitava}, title = {Joining of aluminium alloy and galvanized steel using a controlled gas metal arc process}, series = {Journal of Manufacturing Processes}, volume = {27}, journal = {Journal of Manufacturing Processes}, doi = {10.1016/j.jmapro.2017.04.006}, pages = {179 -- 187}, year = {2017}, language = {en} } @article{GoeckeKueglerMoelleretal.2016, author = {Goecke, Sven-Frithjof and K{\"u}gler, Helga and M{\"o}ller, Felix and Vollertsen, Frank}, title = {Dauerfestigkeit hybridgeschweißter {\"U}berlappn{\"a}hte des Stahls 22MnB5}, series = {Materials Testing}, volume = {58}, journal = {Materials Testing}, number = {6}, doi = {10.3139/120.110880}, pages = {569 -- 574}, year = {2016}, language = {de} } @article{GoeckeShomeDasetal.2016, author = {Goecke, Sven-Frithjof and Shome, M. and Das, A. and De, A.}, title = {Numerical modelling of gas metal arc joining of aluminium alloy and galvanised steels in lap joint configuration}, series = {Science and Technology of Welding \& Joining}, volume = {21}, journal = {Science and Technology of Welding \& Joining}, number = {4}, doi = {10.1080/13621718.2015.1104206}, pages = {303 -- 309}, year = {2016}, language = {en} } @article{GoeckeMuellerSievietal.2014, author = {Goecke, Sven-Frithjof and M{\"u}ller, Alexander and Sievi, Pravin and Albert, Florian and Rethmeier, Michael}, title = {Laser Beam Oscillation Strategies for Fillet Welds in Lap Joints}, series = {Physics Procedia}, volume = {56}, journal = {Physics Procedia}, doi = {10.1016/j.phpro.2014.08.149}, pages = {458 -- 466}, year = {2014}, language = {en} } @misc{DasChaurasiaMandaletal.2023, author = {Das, Atanu and Chaurasia, Prashtan Kumar and Mandal, Gopi K. and Goecke, Sven-Frithjof and De, Amitava}, title = {Sample calculations to estimate joint distortion based on the published article "Analytical Estimation of Thermomechanical Distortion and Interface Layer Thickness for Gas Metal Arc Lap Joining of Dissimilar Sheets"}, year = {2023}, abstract = {A sample set of calculations is presented in this supplemental document to analytically estimate joint distortion for gas metal arc lap joining of aluminum and steel thin sheets following the published article "Analytical Estimation of Thermomechanical Distortion and Interface Layer Thickness for Gas Metal Arc Lap Joining of Dissimilar Sheets"}, language = {en} } @article{DasChaurasiaMandaletal.2023, author = {Das, Atanu and Chaurasia, Prashtan Kumar and Mandal, Gopi K. and Goecke, Sven-Frithjof and De, Amitava}, title = {Analytical estimation of thermomechanical distortion and interface layer thickness for gas metal arc lap joining of dissimilar sheets}, series = {Welding in the World}, journal = {Welding in the World}, number = {76/2023}, publisher = {Springer Link}, issn = {432288}, doi = {10.1007/s40194-01426-x}, pages = {33 -- 49}, year = {2023}, language = {en} } @article{ChaurasiaGoeckeDe2023, author = {Chaurasia, Prashtan Kumar and Goecke, Sven-Frithjof and De, Amitava}, title = {Monitoring melt pool asymmetry in gas metal arc-directed energy deposition}, series = {Science and Technology of Welding and Joining}, journal = {Science and Technology of Welding and Joining}, number = {Augabe 5/ Band 28}, publisher = {Taylor and Fracis}, issn = {1362-1718 (PRINT)}, doi = {10.1080/13621718.2023.2168933}, pages = {424 -- 432}, year = {2023}, language = {en} } @inproceedings{GoeckeSeefeldTyrallaetal.2019, author = {Goecke, Sven-Frithjof and Seefeld, T. and Tyralla, Dieter and Krug, A.}, title = {Monitoring and Control of the Heat Input in MAG-Laser-Hybrid Welding of High Strength Steel in Telescopic Crane Booms}, series = {Konferenz: IEEE International Conference on Automation Science and Engineering (CASE), 2019/ Titel: 2019 IEEE 15th International Conference on Automation Science and Engineering (CASE): August 22-26, 2019, Vancouver, BC, Canada}, booktitle = {Konferenz: IEEE International Conference on Automation Science and Engineering (CASE), 2019/ Titel: 2019 IEEE 15th International Conference on Automation Science and Engineering (CASE): August 22-26, 2019, Vancouver, BC, Canada}, publisher = {IEEE}, address = {Piscataway, New Jersey}, isbn = {978-1-72810-355-6}, doi = {10.1109/COASE.2019.8843219}, year = {2019}, language = {en} } @techreport{GoeckeMuellerEbertSpiegel2015, author = {Goecke, Sven-Frithjof and M{\"u}ller, Alexander and Ebert-Spiegel, Michael}, title = {ECOWELD - Energiegeregeltes Metallschutzgas- und Laserschweißen : "Ingenieurnachwuchs" 2011 (Maschinenbau) : Ausschreibung der F{\"o}rderlinie "Qualifizierung von Ingenieurnachwuchs an Fachhochschulen" 2011 im Rahmen des Programms "Forschung an Fachhochschulen" : Schlussbericht : Laufzeit des Vorhabens von: 01.08.2011 bis: 31.03.2015}, doi = {10.2314/GBV:867121742}, pages = {55}, year = {2015}, language = {de} } @article{ChaurasiaGoeckeDe2022, author = {Chaurasia, Prashtan Kumar and Goecke, Sven-Frithjof and De, Amitava}, title = {Real-time monitoring of temperature field, metal transfer and cooling rate during gas metal arc-directed energy deposition}, series = {Science and Technology of Welding and Joining}, journal = {Science and Technology of Welding and Joining}, number = {27}, publisher = {Taylor \& Francis}, issn = {13621718}, doi = {10.1080/13621718.2022.2080447}, pages = {512 -- 521}, year = {2022}, language = {en} } @article{GoeckeMakwanaShomeetal.2019, author = {Goecke, Sven-Frithjof and Makwana, Pinaac and Shome, Mahadev and De, Amitava}, title = {Probing joint strength and distortion in gas metal arc lap joining of aluminum and steel sheets}, series = {Welding in the World}, volume = {63}, journal = {Welding in the World}, number = {2}, publisher = {Springer}, doi = {10.1007/s40194-018-0653-z}, pages = {229 -- 236}, year = {2019}, language = {en} } @article{MakwanaGoeckeDe2019, author = {Makwana, Pinaac and Goecke, Sven-Frithjof and De, Amitava}, title = {Real-time heat input monitoring towards robust GMA brazing}, series = {Science and Technology of Welding \& Joining}, volume = {24}, journal = {Science and Technology of Welding \& Joining}, number = {1}, publisher = {Taylor \& Francis}, doi = {10.1080/13621718.2018.1470290}, pages = {1 -- 11}, year = {2019}, language = {en} } @article{DasGoeckeDe2021, author = {Das, Atanu and Goecke, Sven-Frithjof and De, Amitava}, title = {Joining of aluminium alloy and galvanized steel sheets multimaterial assembly using a gas metal arc based process}, series = {Tecnologia em Matalurgia, Materiais e Minera{\c{c}}{\~a}o}, journal = {Tecnologia em Matalurgia, Materiais e Minera{\c{c}}{\~a}o}, publisher = {ABM - Associa{\c{c}}{\~a}o Brasileira de Metalurgia, Materiais e Minera{\c{c}}{\~a}o}, issn = {2176-1515 (PRINT) 2176-1523 (ONLINE)}, doi = {10.4322/2176-1523.20212464}, year = {2021}, language = {en} }